CCVPN -Test Status

 Lab infrastructure preparation: including hardware, VIMs, sotn controller, SD-WAN controller, PNFs / VNFs installation  

100%

T00001

 Install ONAP and health check 

100%

T00002

SOTN Controllers  Registration

100%

T00003

SD-WAN Controllers Registration

100%

T00004

CCVPN Resource Template Import  

100%

T00005

SOTN VPN Infra Service Design 

100%

T00006

Stie Enterprise Service Design 

100%

SDNC-523: vnf-information.vnf-id validation check should not be mandatory in validate-vnf-input DGClosed

T00007

Site DC service Design 

100%

T00008

SDWAN VPN Infra service Design

100%

SDNC-527: SDWAN connectivity create failed due to empty request body for put operation during authorize tenant requestClosed

T00009

WAN Connection service Design

100%

T00010

 SOTN Network Topology Discovery 

100%

CCSDK-935: restapicall JsonParser failed if response contains : as part of response bodyClosed

T00011

 SOTN Link Management  

100%

AAI-1925: Fix EdgeRules for CasablancaClosedhas been delivered and have been replaced in test env, need UUI team to be verified

Can delete the link to external onap otn domain with manual steps, see Manual steps for CCVPN Integration Testing

T00012

CCVPN E2E Service Creation

100%

CSAR issue

SDC-1947: csar generated in cmcc seems is not properClosed

so-bpmn-infra startup failed.

SO-1216: The so-bpmn-infra startup failed in Casablanca 01 environmentClosed

AAI API issues

USECASEUI-183: create ext-aai-network api can not accept json requestClosed

USECASEUI-182: create topo-network api can not use json requestClosed

USECASEUI-184: create pnf api can not use json requestClosed

USECASEUI-187: create termination point api can not use json requestClosed

USECASEUI-185: create link between OTN Domains api can not use json requetClosed

SDC distribute template error with

Open

Open

SDC-1955: SDC distribution failedClosed In Pogress, This issue is being checked by Michael.

SDC-1958: SDC Parser can not be used for CCVPN TemplatesClosedUUI can’t parse the service template using SDC tosca parser, so the service creation haven’t triggered by UUI

For SDC-1955 and SDC-1958 which encountered during site service creation, we can avoid these blocking issue using manual steps.

see Manual steps for CCVPN Integration Testing

T00013

CCVPN  E2E Service Termination

100%

T00014

Close-Loop Recovery 

100%

Homles can startup following Vijay's steps

Policy to SDNC has wrong url issue is fixed now : tested with correcting url in the properties file and is working fine.
Testing with mock controller is success, need to check with actual controller.

SDNC-540: CCVPN closed loop testing failed.Closed policy to SDNC call with "reoptimize" svc-action in "network-topology-operation" DG is overwritten. Now it is fixed and merged.

Abbreviation

Full Name

PNF

Physical Network Function

NFV

Network Function Virtualization

NFVI

Network Function Virtualization Infrastructure

SOTN

Software Defined OTN

CPE

Customer Premise Equipment

GUI

Graphic User Interface

Module

Function

ONAP

The ONAP system for automation operation.

SOTN Controller

A third party controller for OTN network.

SD-WAN Controller

A third party controller for SD-WAN solution

Name

Responsibility

Account

Administrator

Responsible for system management; Personnel permission configuration; ONAP external system registration; Operational life cycle management

demo/demo123456!

Designer

Service template design

cs0008/demo123456!

Tester

Service template test

jm0007/demo123456!

Governor

Service template approve

gv0001/demo123456!

Operator

Service template distribution

op0001/demo123456!

Test No:

TEST-01

Project:

ONAP ESR

Sub Project:

3^rd SDNC controller registration

Objective:

support SOTN controller registered to ESR-SDNC

Pre-conditions:

1. 3rd SOTN Controller have been installed

Test step:

1. Login to ONAP by administrator user.

2.  In the ONAP esr-sdnc UI, click Register button to Register SDNC information (IP, port, authentication information, etc.) of SDNC manufacturer, click next to fill in the next page, and finally click save button to complete registration.

Test Result:

1. We can find SOTN controller registered in ESR-SDNC portal.

Observation:

When SOTN controller registered to ONAP. Wait for minutes, SDNC will synchronize the network topology to ONAP. Please check the topology data of AAI.

Test No:

TEST-02

Project:

ONAP ESR

Sub Project:

3^rd SDNC controller registration

Objective:

support SD-WAN controller registered to ESR-SDNC

Pre-conditions:

1. 3rd SD-WAN controller have been installed

Test step:

1. Login to ONAP by administrator user.

2.  In the ONAP esr-sdnc UI, click Register button to Register SDNC information (IP, port, authentication information, etc.) of SDNC manufacturer, click next to fill in the next page, and finally click save button to complete registration.

Test Result:

1. We can find 3rd SD-WAN controller registered in ESR-SDNC portal.

Observation:

Test NO:

TEST-03

Project:

SDC Service Design

Sub Project:

Resource import for CCVPN

Objective:

Support to import the resources for CCVPN.

Operator:

Designer, Tester

Pre-conditions:

1. The resources node-types for CCVPN are ready.

Test step:

1. Designer login to SDC portal.

2. Import the resources to SDC?

Test Result:

1. The resources are imported to SDC.

Observation:

  We can find new resources for CCVPN in SDC portal

Test NO:

TEST-04

Project:

SDC Service Design

Sub-project:

Design CCVPN services: SOTN VPN Infra Service, Site Enterprise Service, Site DC Service, SDWAN VPN Infra, Wan Connection Service

Objective:

SDC support to design CCVPN services

Pre-condition:

1. All resources have been ready.

Test step:

1. Designer login to ONAP?click “add service” to create a service template?

2. Enter the service general parameters?including name?category?select ‘E2E service’??description?contact ID?project code etc. click ‘Create” to create service template.

‘Saved successfully’ information will be shown.

3. Enter ‘Composition’ item?select resources needed for the service.

4. Enter ‘Properties Assignment’ item?config the parameters of the resources?click ‘Declare’ button to declare the parameters of resources as service inputs.

5. Click ‘submit for testing’? ‘Submitted for testing successfully’ will be shown.

6. Tester login to ONAP?click the service to test?and then click ‘start testing’ to test the service template. After test, click ‘accept’.

7. Governor login to ONAP to approve the service template.

8. Operator login to ONAP to distribute the service template.

Test result:

1. The services for CCVPN created successfully.

2. CCVPN services distributed to A&AI and SO.

Observation:

Test NO:

TEST-05

Project:

Service LCM

Sub-project:

SOTN network topology synchronized to ONAP

Objective:

SOTN network topology can be synchronized to ONAP and be saved in A&AI.

Pre-condition:

1. All OTN network PNFs are ready.

2. 3rd SOTN controller is ready and the OTN PNFs have been added to it.

Test steps:

1. Administrator login to ONAP?click “AAI UI ->view & inspect”?to view the topology synchronized from 3^rd SOTN controller.

2. Check the nodes of A&AI that used to save topology information.

Test result:

1. We can find the topology data in A&AI

Observation:

Test NO:

TEST-05

Project:

Service LCM

Sub-project:

SOTN network topology management

Objective:

UUI can support to view the topology of network and create cross-domain/cross-ONAP links.

Pre-condition:

1. All OTN network PNFs are ready.

2. 3rd SOTN controller is ready and the OTN PNFs have been added to it.

3. 3rd SOTN controller have been registered to ONAP ESR

Test steps:

1. Administrator login to ONAP, click “UUI” to enter the use case UI.

2. Click ‘Topology management’ to manage the topology of OTN network.

3. Click ‘Add link’ to add cross-domain/cross-onap links.

Test result:

1. We can find the topology data in UUI. To show the ONAP topologies.

2. When we add the cross-domain link , a link will be shown between different domains.

3. When we add the cross-ONAP link, a link with an ONAP icon will be shown in the portal.

Observation:

Test NO:

TEST-06

Project:

Service LCM

Sub Project:

Service instantiation for CCVPN services: SOTN VPN Infra Service, Site Enterprise Service, Site DC Service, SD-WAN VPN Infra service, WAN Connection Service.

Objective:

The services for CCVPN can be instantiated and the CPEs from two different service provider can talk with each other.

Pre-condition:

1. Four services for CCVPN have been designed and distribute successful.

2. The 3rd SOTN controller and SD-WAN controller have been installed and registered to ONAP.

3. The topology of the network have been synchronized to ONAP and the links cross domain/cross ONAP have been created by UUI.

Test step:

1. Administrator login to ONAP portal?select ‘UUI-biz’ to entry use case UI.

2.Click UUI item “Services”?and select ‘Services’ Tab.

3. Select customer and service type

4. Click ‘create’ to create services.

5. On ‘Create Service’ dialog, select the service template and enter the inputs for the service.

6. Click ‘OK’ to instantiate a service.

7. We need to create the services follow the sequence: SOTN VPN Infra Service, SD-WAN VPN Infra Service, Site Enterprise Service, Site DC Service.

Test Result:

1. All service can be created successfully.

Observation:

1. Check the SOTN controller, we can find the SOTN EPL created.

2. Check the SD-WAN controller we can find the SD-WAN instance created.

3. Check the terminal points that connect to CPE/vCPE for OTN network, they can reach to each other.

4. Check the sites between two different ONAP, try to ‘Ping’ from one CPE to another,

It can connect to each other.

1. For two CPEs, they can connect to each by internet or OTN special connectivity.

Test NO:

TEST-08

Project:

Service LCM

Sub-project:

Service termination for CCVPN services: SOTN VPN Infra Service, Site Enterprise Service, Site DC Service, SD-WAN VPN Infra service, WAN Connection Service

Objective:

The services for CCVPN can be terminated.

Pre-condition:

1. Four services for CCVPN have been created successfully.

Test step:

1. Administrator login to ONAP portal?select ‘UUI-biz’ to entry use case UI.

2. Click UUI item “Services”?and select ‘Services’ Tab.

3. Select customer and service type

4. Select service and click ‘delete’ to delete services.

5. Click ‘OK’ to terminate a service.

6. We need to delete the services follow the sequence: Site DC Service, Site Enterprise Service, SD-WAN VPN Infra Service, SOTN VPN Infra Service.

Test Result:

1. All service can be deleted successfully.

Observation:

1. Check the SOTN controller, we can find the SOTN EPL deleted.

2. Check the SD-WAN controller we can find the SD-WAN instance deleted.

3. Check the AAI in two ONAPs, all services for CCVPN are deleted.

Test NO:

TEST-09

Project:

Closed Loop

Sub-project:

Closed Loop in ONAP SOTN link

Objective:

ONAP can find SOTN network cross domain link interruption automatically, and rebuild SOTN business automatically.

Pre-condition:

1. All elements of OTN network TOPO environment has been completed.

2. CCVPN services have been created and bussiness is working fine.

Test step:

1. Interrupt the cross domain link in the CMCC side ONAP manually.

Test Result:

1. Closed-loop triggered automatically, SOTN link will be recreated through another cross domain link.

Observation:

1. Check all the CCVPN services are work fine as in “CCVPN Service Instantiation”