Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 40 Next »

VoLTE  Use Case Testing Screen Capture

volte E2E edited.mp4

SDC Desgin Video_2017-11-12_111750.wmv

UUI Instantiation Video_2017-11-12_172653.wmv

UUI_Instantiation_edited.mp4

VNF Onboarding and EPC Service Creation.mp4

EPC Service Creation.mp4


 

  1. Passed UUI performance and alarm display testing
    UUI performance and alarm display demo: UUI Performance and Alarm Display Demo.mp4


 

  1. Validate SDC-533

Meeting recording: SDC-533-validation.mp4


 

  1. VoLTE closed loop testing and demo

VoLTE closed loop demo recording: VoLTE Closed Loop Demo.mp4

VoLTE closed loop testing and debugging recording: 


 

  1. SDNC/IPWAN controller (underlay) integrated sucessfully
  2. SDNC/SPTN controller (underlay) integrated successfully
  3. SDNC/Overlay controller integration is done 50%
  4. Mobile 4G handset registration is successful through VNFs, but connection drops after a few seconds. Vendors are debugging the issue  
  5. Had a meeting with SDC team about SDC-533 issue, they will try to deliver the fix today, latest by Sunday 11/12/17


 

  1. SDNC underlay and overlay are being tested with controllers 
  2. SDC-533 issue is escalated to management


 

  1. SO/SDNC integration test passed

 

  1. DCI overlay network is manually connected now
  2. Handset and base station vendor started testing with vMME and vSPGW in CMCC lab

 

  1. Integration test of Holmes with simulated event and A&AI data
  2. Integration test of Policy with ONSET and ABATED events
  3. Integration test Policy/VFC interface. VFC received vmrestart action, but since there is network service defined in AAI, operation failed in RFC.

 

  1. Followed up on SDC-533 

 

  1. Tested EMS driver sends alarm to VES and VES sends event to Holmes through DMAAP message
  2. Tested UUI/SO interface
     

 

  1. Tested VoLTE CSARs after SDC latest change with Michael
  2. Created VoLTE e2e service in CMCC lab with the team
    Meeting recording of CSAR onboarding test: VoLTE Integration Test 10292017-1.mp4 | VoLTE Integration Test 10292017-1.txt
    Meeting recording of VoLTE e2e service design in CMCC: VoLTE Integration Test 10292017-2.mp4 | VoLTE Integration Test 10292017-2.txt

  1. Holmes integration test. Holmes received event but failed when parsing it
    Recording of Holmes integration test: VoLTE Integration Test 10282017.mp4 | VoLTE Integration Test 10282017.txt


  1. Tested UUI/SO interface. UUI can send service instantiation request to SO
  2. Tested simulated multiVIM alarm and sent it to VES, VES reported event to DMAAP
  3. Populated AAI data for closed loop test
    Meeting recording of UUI/SO integration test: VoLTE Integration Test 10272017-1.mp4
    Meeting recording of Holmes integration test: VoLTE Integration Test 10272017-2.mp4 | VoLTE Integration Test 10272017-2.txt

 

  1. Onboard all vendor CSARs (6) needed for VoLTE R1 use case test.  vTAS is not needed for VoLTE R1 use case, as is put as low priority
  2. UUI can send service instantiation request to SO
  3. VFC can parse SDC CSAR and send VL creation request to MultiVIM
    Meeting Recording of CSAR review: VoLTE Integration Test 10252017.mp4

 

  1. Onboarded 5 out 6 vendors CSAR. The remaining one needed by VoLTE use case is I/S CSCF
  2. Created SDC-533 - Getting issue details... STATUS
  3. UUI successfully populated all parameters on GUI
  4. Installed and configured Holmes in standalone mode
    Meeting Recording of CSAR review: VoLTE Integration Test 10242017.mp4
    Meeting Recording of UUI test: VoLTE Integration Test 10242017-2.mp4 | VoLTE Integration Test 10242017-2.txt


 

  1. Reviewed vendors CSAR
  2. Tested closed loop Policy for VoLTE use case
    Meeting Recording of CSAR review: VoLTE Integration Test 10232017-1.mp4
    Meeting Recording of Policy testing: VoLTE Integration Test 10232017-2.mp4


 

  1. Tested out new CSAR updates from vendors. They all are having issues, and feedbacks have been given to vendors 
  2. During the test found SDC ignores zip file under Artifacts directory of vendor CSAR. The zip file is used by vendor to pass info to VFC. Created  SDC-483 - Getting issue details... STATUS  
  3. Found SDC throws error when delete a connection between two VNF resource in Service Composition GUI.  SDC-484 - Getting issue details... STATUS

    Meeting recording: VoLTE Integration Test 10192017.mp4 | VoLTE Integration Test 10192017.txt 

 

  1. All VNFs are provided to SDC team for review. Initially 2 out of 7 VNFs have passed SDC validation
  2. Discussed several issues with SDC - where to find vnf name in template, and how to design a service with pnf in R1. Need to follow up.
  3. Reviewed VoLTE SDNC implementation
  4. Discussed plan to test closed loop. Multivim team is to provide sample event sent from multivim to VES for an alarm. Also Holmes team to provide the sample message sent to Policy. 

Recording of VoLTE SDNC testing: VoLTE Integration Test 10192017.mp4; VoLTE Integration Test 10192017.txt


 

  1. UUI successfully accessed A&AI and SDC. Reviewed UUI GUI with SDC team
  2. Discussed vendor CSAR with SDC team
  3. Discussed with SDNC on integration test. The code has been tested in local env, will move to integration lab for more testing
  4. Passed VES testing with simulated event from VFC EMS driver
  5. Passed all ESR testing with Li Zi

    Recording of CSAR discussion: VoLTE Integration Test 10182017-1.mp4, VoLTE Integration Test 10182017-1.txt
    Recording of VES testing: VoLTE Integration Test 10182017-2.mp4, VoLTE Integration Test 10182017-2.txt
    Recording of ESR testing: VoLTE Integration Test 10182017-3.mp4, VoLTE Integration Test 10182017-3.txt 

 

  1. Reviewed the working version of CSCF CSAR example from SDC team. Used the CSAR to test onboarding and service creation successfully.
  2. SDC team will provide analysis of other CSAR files from vendors tomorrow
  3. Will set up daily meeting with SDC team to review outstanding issues on SDC, including CSAR files and integration issues, e.g. UUI 
  4. Did UUI integration test. Solved the issue with AAI access, now we can see users and service types in GUI
  5. There was an issue with displaying service model on GUI, Lu Ji will provide the fix today

Recording of SDC CSAR testing: VoLTE Integration Test 10172017.mp4 | VoLTE Integration Test 10172017.txt

Recording of UUI testing: VoLTE Integration Test 10172017-2.mp4 | VoLTE Integration Test 10182017-2.txt

  

 

  1. Integration testing with SDC and UUI
  2. Identified the issue of uui_ui container exits  USECASEUI-51 - Getting issue details... STATUS
  3. Found uui_ui container misses port mapping  INT-277 - Getting issue details... STATUS
  4. UUI service GUI doesn't show any model  USECASEUI-52 - Getting issue details... STATUS

VoLTE Integration Test 10162017.mp4


 

  1. Worked with David on testing service design with VNF. Finished testing of vEPC, vIMS service creation with modified vCSCF example. Also tested e2e VoLTE service creation with vEPC, vIMS, underlay and overlay network
  2. Finished service distribution testing for vEPC, vIMS and VoLTE. Service are distributed and downloaded by A&AI and SO. 
  3. Found several issues in SDC during test and created JIRA tickets SDC-471 - Getting issue details... STATUS ,  SDC-472 - Getting issue details... STATUS

VoLTE Integration Test 10132017.mp4


 

  1. Started CMCC ONAP installation process. Solved problem of remote access to CMCC lab. Uploaded images, created keys and flavors used by ONAP in Openstack.   However the unable to download files from gerrit.onap.org. Will work with Chengli to see how to solve the issue. 
  2. Worked with SDC and vendors (Huawei and ZTE) to test vendor's vMME CSAR. Modified the CSAR together to the best of our knowledge, but SDC onboarding process failed on TOSCA dynamic type creation.  SDC-454 - Getting issue details... STATUS
  3. Tested simplified version of vCSCF CSAR,  it passed VNF onboarding and also we used the VNF to create vIMS.  
  4. vIMS distribution failed on DMAAP error. Will reinstall message-router and test it again. 

VoLTE Integration Test 10122017.mp4

VoLTE Integration Test 10122017.txt


 

VoLTE Integration Test 10112017.mp4


 

VoLTE Integration Test 10102017.mp4


  • No labels