Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 119 Next »

IDJIRA / helpdesk #
(if applicable)		Team BlockedBlocked byTeam that needs to RespondNotes

M2 Blocking

Y/N

M3 Blocking Y/N

Plan for closure

(provide the plan and expected closure date)

Resolved Y/N
B9
vCPE use case/IntegrationTo confirm the vCPE service model are fully supported by SDC.SDC

The vCPE team has called a meeting on 7/27 to address this.

Michael Lando: vCPE is supported, sdc team is waiting for the vnf files to be able to validate them and test there onboarding.




N
B10
VoLTE usecase/Integration Confirm if SDC can import TOSCA template and view/edit the template SDC Feedback: The answer got during July virtual developer event was SDC supports TOSCA, but need to check if VoLTE template from Open-O (that's what VFC is expecting) can be supported.


N
B11
MSB

A repo under OOM to accommodate the registrator codes which integrate OOM and MSB

Resources and Repositories

OOMRequest has been sent out to OOM PTL but no response yet.


Y
B12
SDCThe work flow repoSDC

During the virtual developer meeting, Michael response that he will take care of it.

Michael Lando: the repository was created sdc is waiting on confirmation on the committer creation for the project.




N
B15
 SDC/VFC integration VoLTE usecase support SDC


  • NSD and NS Package need
    the SDC team confirm
  • VNF Package and ImageDesc need the SDC team confirm
  • TOSCA issues need the SDC team confirm



 N

The material from VFC has provided. The VFC team needs the SDC team feed back and get the NSD and NS package, VNF package output from SDC, which is part of the API definition.

B19
SOClearly define and document SDC output and its content, including recipe, model, and other artifacts

SDC


NN

N

This is an issue not a blocker.

B20
Multi VIM/CloudARIA flow interfaces for Multi VIMSONeed to identify basic scope for R1 and function test case


Y
B21
Multi VIM/CloudAPP-C interfaces for Multi VIM, Should we support VM status get, stop, start for R1 use cases?APP-CNeed to identify API for R1 and function test case for VCPE use case


Y
B22
Multi VIM/Cloudscope for R1DCAEidentify DCAE service delopyment interfaces for Multi VIM, interfaces called by Cloudify


Y
B23
APPC  Dependency on SDNC for ODL Docker SDNCAPPC is dependent on SDNC for the ODL and must align on same version. SDNC is planning to upgrade to Carbon, so APPC must also upgrade. ETA for Carbon Docker was end of July, but reforecast to 8/4. ODL upgrade has been problematic in the past, so important to get this as soon as possible to start integration. NNReceived Carbon ODL Docker from CCSDK; working to integrate into APPC now. Y
B24
SO/APPC/VID/Policy/AAI/SDC/SDNC/DCAE/PORTALONAP R1 at risk, if the decision is to migrate to *.onap.orgTSC

This topic has been raised to onap-tsc mailing list and will be discussed with ONAP TSC on Thursday 8/3

https://lists.onap.org/pipermail/onap-tsc/2017-August/001436.html

N

N
B25
DCAENeed DMaaP deployment blueprint for ONAP R1DMaaP8/23 - OOM will be deploying dmaap; no longer blocker for DCAE


N
B26
DCAENeed to understand how API endpoints provided by other ONAP components are configured/communicated to when ONAP is deployed. For example, how would DCAE know where is the A&AI API. Is this well-know via a DNS C-name or via service discovery. If the latter, how.Integration or OOM

Pending decision from Integration team meeting planned for 8/28


Feedback: have scheduled a meeting on 8/7 to discuss the issue.





N

Results from 8/7 meeting: when ONAP is deployed by HEAT, the service discovery is clear. When ONAP is deployed by OOM, it needs more discussion.

In another meeting which OOM/DCAE/MSB/Integration teams participated, no conclusion could be made on how MSB integrated with OOM.

B27
DCAENeed to understand how the whole ONAP system is brought up, and how various per-deployment configuration parameters are communicated to individual ONAP components and subcomponents.Integration or OOM

Pending decision from Integration team meeting planned for 8/28

Feedback: have scheduled a meeting on 8/7 to discuss the issue





N

Results from 8/7 meeting: when ONAP is deployed by HEAT, the mechanism of parameter passing is clear. When ONAP is deployed by OOM, it needs more discussion.

B29
CLAMPInterface content changePolicy, DCAE, SDC

3 potential changes might affect CLAMP development :

  • the content that Clamp sends to Policy might be updated (api will be the same, only changes in the content);
  • the format of the blueprint that Clamp sends to SDC might be updated (api will be the same, only changes in the content);
  • the data model for TCA might be changed (means both UI and backend code change)
NNCLAMP team will account for these changes in next sprints but the sooner the change is identified the better.

N


B30
DCAEAvailability of a Pypi server on LF NexusLinux FoundationDCAE needs a Pypi server for hosting Python packages built from ONAP DCAEGEN2 Python code so they can be installed at runtime. Email requests sent to onap-helpdesk@rt.linuxfoundation.org <onap-helpdesk@rt.linuxfoundation.org> but received no ticker number.



B31
OOM

Availability of stable code / docker image for:

  • SO (currently the MSO code is there, but no tosca-based orchestration added)
  • DCAE Gen 2

SO

DCAE

OOM needs to have stable and working docker images in order to complete deployment specs.














Closed items

ID



JIRA / helpdesk #
(if applicable)		Team BlockedBlocked byTeam that needs to Respond Notes M2 BlockingResolved Y/N

B1
VoLTE usecase/ Integration/CLAMP/HolmesIdentify the story of fault correlation and auto-healing.VFC

Which VNF, what kind of fault, etc.

Needed for M2 integration test case design -by 7/30

Feedback from CMCC: is talking with vendor to check the capabilities of VNF event generation. Should provide answer by 8/3

Y

Y

VoLTE Use Case Control Loop



B2
VF-CVES Collector API,nfc/nfnaming standardDCAE

DCAE R1 Release Planning#APIOutgoingDependencies

8/21 - Vijay Kumar: The nfc/nf namingconvention is being worked with A&AI team by alok411. For DCAE this information is pass-through (as VES spec identifies these as optional parameter)

8/22 Thanks Vijay Kumar, Currently the nfc/nf name field from VF-C side?we will fill the values with an empty string.


Y

B3
HolmesCode: message get from and back to DMaaPDCAENeed the sample to learn how to get message from and back to DMaaP.

Y

The test script for interfacing with DMaaP Message Router can be found at "git clone http://gerrit.onap.org/r/dcae/demo/startup/message-router", then look into docker_files/tests/test.sh. 



B5
Holmes and VF-CDMaaP API: sub/pub, query, etc.DmaaP

Pamela Dragosh: If Ramprasad Koya or Varun Gudisena could provide a wiki page or documentation for this API that would be great. Both the Holmes and VFC team need to know the work involved in integrating this.

Feedback from Varun, the API documentation for DMaap will be availabe by August 3rd.

Feed back from Yan, VF-C will not depend on DMaap in R1.


Y

API Documentation is available at

DMaaP API




B6
PolicyVF-C API invoked by PolicyVF-C

Pamela Dragosh: The policy team requests that VF-C use the Dmaap API that is identical to what APPC supports today. Having a common Controller API would be ideal.

Feedback from Yan, VF-C are working on the rest API that provide to policy,the rest API plan to be available by August 3rd.While VF-C team are analyzing the Dmaap API to decide whether to use DMaap or not in R1,

Feedback from Yan,VF-C has provided the rest API to Policy Team.


Y

B7
HolmesHolmes component spec., DMaaP topic + message, rules, etc.Holmes

To work with the control loop, Holmes needt o do a lot of work.

Guangrong Fu: the component-spec file has been sent to the DCAE team. Waiting for the response.

Guangrong Fu: A sample rule could be found at Holmes Weekly Meeting (20170720)


Y

B8
vCPEuse case/IntegrationTo confirm the interface between SDC and CLAMPSDC/CLAMP/DCAESDC, CLAMP, DCAE have confirmed that the interfaces among them for closed loop control have been defined, implemented, and tested.

Y



B13
Holmes

Holmes is not able to call A&AI RESTful APIs while integrated with DCAE.


MSB/OOM/DCAENeed DCAE to be integrated with MSB for service discovery.
Y

B14
VoLTE usecase/ Integration/SO/VFCSDC VoLTE use case supportSDC

Identify the gaps before the functional freeze milestone, here are the action items and date.

  •  Design an example VoLTE model with SDC and export  the model as CSAR (use OPEN-O VoLTE CSARs as reference) – by July 30

  •  Analyze the gaps for VoLTE model design supporting – by July 31

  • Estimate the Identified gaps and risks, decide which plan should be the first priority to support VoLTE use case in Amsterdam release. - by August 1.

  •  Add the work items to Amsterdam Release to address all the identified gaps.  - by August 3.
YY

B16
VNF SDKNeed to understand process for handing-off TOSCA packaged VNFs for onboardingSDCNeed to understand how we can transfer VNFs from the vnfsdk package validation tool to SDC once the VNFs have been validatedNY

B17
VF-C

VoLTE usecase related instances persistence

Need to confirm if adding new attributes will impact other projects

A&AI

James Forsyth will provide instructions for adding new attributes that used in VoLTE usecase in A&AI scheme. Complete - see this page: Tutorial: Making and Testing a Schema Change in A&AI


Y

B18
SOVFC NBI definition for SOVFC

Need VFC NBI definition

-by 7/31

Feedback from Yan, VF-C team have discussed the interface with so team and will provide the interface document by 7/31

Feedback from Yan,The interface document has uploaded in wiki:

VF-C R1 Deliverables


Y

B28
Usecase UIAPIs for alarm and performance.DCAE

Does DCAE provide alarm and performance datas to Usecase UI by RESTful APIs?

08/21 - Vijay Kumar Based on meeting held on 8/14, DCAE events will be subscribed from DMAAAP by usecaseUI team.


Y N

N
B4
HolmesAPIs for service query (like the info of services which are registered to the DCAE Consul) and configuration loading, etc.DCAE

How to get the external IP of the services via Consul? Where and how to pull the rules designed during the run time? When will the detailed APIs be provided?

Feedback from Lusheng, the high level API will be provided by M2, and the full API spec. by M3.

8/21 - Vijay Kumar: Holmes when deployed by DCAEGEN2 will be registered into Consul by the platform.  Run-time rules will be pushed into container as updated configuration (K-V pair)

NY2017/08/27
B33
DCAE/Holmes/POLICYClarification on A&AI API calls during Control Loop runtime by the various components.

A&AI

James Forsyth

Pamela Dragosh will provide more details for this blocking issue.

NN

M4 Blocking

Pamela Dragosh will create a wiki to clarify the outstanding issues.

Schedule subsequent meeting with the teams to resolve.

Y
B32
VNFRQTSJenkins / Verify

LF +

documentation manages the jenkins task for all documentation

Difficult for the VNFRQTS project to progress unless we can have visibility of our work product at onap.readthedocs.ioYYworking with LF + Docs to resolveN


















































  • No labels