Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 82 Next »


TITLE

P02: Create documentation for an ONAP release (ONAP project teams)

SUBJECT
Procedure #02 describes the required tasks which must be performed by ONAP project teams to create their release-specific documentation for an ONAP main and maintenance release.
TARGET AUDIENCE
ONAP project teams: Maintainers of project repository
RELEASE RELEVANCE
11.x.x 'Kohn'
TABLE OF CONTENTS

AUTHOR

Thomas Kulik

REVIEWER

Toine Siebelink Luke Gleeson (Unlicensed) 

NOTES

This procedure is focussing on documentation even if it largely describes the release process of an ONAP project. But there is no guarantee on completeness for the full ONAP project release process.

Not every step within a single task is listed. For example, common tasks like 'git' operations (e.g. add, remove, commit, review) are not included. Jira or Gerrit activities (e.g. review, submit, cherry-pick) related to file changes are also not listed.

A development environment to write and preview reStructuredText is highly recommended.

The following tasks may have a different relevance depending on the type of release (main, maintenance) you are working on. Optional tasks for a maintenance release marked as 'maintenance (opt)'. They are expected to be performed only if you need to fix issues or you have to incorporate smaller changes.

The placeholder '{release}' needs to be substituted by the name of the new release, e.g. 'istanbul' or 'jakarta'.

(warning) With introduction of the ONAP 'jakarta' release a project/repository containing formal ONAP documentation (rst format) needs to create a release branch in any case. Otherwise the project/repository can not be included to the release-specific version of documentation in ReadTheDocs.

EXAMPLE CONFIGS

Together with the 'doc' repository the documentation team provides basic 'tox', 'sphinx' and ReadTheDocs example configuration files to be used by other ONAP projects (except 'doc'). Every project containing documentation in ReStructuredText format needs them. The files are:

  • conf.py
  • requirements-docs.txt
  • tox.ini
  • .readthedocs.yaml
  • ribbon.css

(warning) Always check that the configuration files used in your repository are in sync with the provided examples. The example configs of course can be extended to fulfill specific needs of other ONAP projects. Please note README.md for the details.

'examples' directory in the 'doc' repository (master):

1.0

MASTER BRANCH PREPARATION

1.1

Create a new Jira task and use the ID for all upcoming changes

RELEASE: main + maintenance

BRANCH: not applicable

FILE: n/a

DESCR: Of course it is up to your project team how to manage the assignment of Issue-IDs. But generally you need to add one to any gerrit change. Please follow the instructions below or the agreed process in your project team to create the Issue-ID.

  1. Open https://https://jira.onap.org/
  2. Create a new task for your project and name it e.g. "Create docs for '{release}' {main|maintenance} release". Assign the release '{release}' to it. The ID is required for submitting all related changes in gerrit. The format to be used in gerrit is 'Issue-ID: {YOUR-PROJ}-nnn'.
1.2

Clone 'master' branch of your repository to your local development environment

RELEASE: main + maintenance

BRANCH: 'master'

FILE: all

DESCR: If not already done earlier (depending on common practice in your project team), please use the command below to clone the 'master' branch.

git clone -b master ssh://<username>@gerrit.onap.org:29418/{repository}

Now you can start to modify files in the 'master' branch.

2.0

MASTER BRANCH UPDATES

2.1

Ensure correct 'defaultbranch' in '.gitreview'

RELEASE: main

BRANCH: 'master'

FILE: {repository}/.gitreview

DESCR: Check that the 'defaultbranch' entry is pointing to 'master' ('defaultbranch=master'). This can help to avoid that changes are accidentally committed or even published to a wrong branch. Add/update the 'project' entry to show the name of your project.

EXAMPLE: active '.gitreview' for 'master' branch, 'doc' project

 

2.2

Update Sphinx configuration file 'conf.py'

RELEASE: main + maintenance (opt)

BRANCH: 'master'

FILE: {repository}/docs/conf.py

DESCR: The Sphinx build configuration file 'conf.py' contains configuration needed to customize Sphinx input and output behavior. Please follow the instructions below.

  1. Set 'release' and 'version' to 'master'.
  2. Set 'branch' to 'latest'.
  3. Set 'intersphinx_mapping' for projects/repositories you are referencing in your documentation files (see 'intershinx_mapping' entries in the examples below)
  4. Remove 'intersphinx_mapping' for projects/repositories you are no longer referencing in your documentation files.

Also compare the version used in your repository with the example provided in the 'doc' repo and update if required. Be careful if your active configuration file was already extended.

EXAMPLE #1: example 'conf.py' for 'master' branch

EXAMPLE #2: active 'conf.py' for 'master' branch, 'doc' project

2.3

Update Sphinx configuration file 'requirements-docs.txt'

RELEASE: main

BRANCH: 'master'

FILE: {repository}/docs/etc/requirements-docs.txt

DESCR: The file contains the required libraries to be used by Sphinx. Compare the version used in your repository with the example provided in the 'doc' repo and update if required. Be careful if your active configuration file was already extended.

EXAMPLE: example 'requirements-docs.txt' for 'master' branch

 

2.4

Update Tox configuration file 'tox.ini'

RELEASE: main

BRANCH: 'master'

FILE: {repository}/tox.ini

DESCR: The file is required to customize different tox environments. It is stored in the root folder (warning) of your project. Compare the version used in your repository with the example provided in the 'doc' repo and update if required.  Be careful if your active configuration file was already extended.

  1. Set correct branch (master) for all (warning) lines containing:

-chttps://git.onap.org/doc/plain/etc/upper-constraints.onap.txt?h=master

EXAMPLE: example 'tox.ini' for 'master' branch

 

OPEN: Update 'upper-constraints' entries here after the final version of the file is available in the 'doc' repo

2.5

Update ReadTheDocs build configuration file '.readthedocs.yaml'

RELEASE: main + maintenance (opt)

BRANCH: 'master'

FILE: {repository}/.readthedocs.yaml

DESCR: The ReadTheDocs build configuration file '.readthedocs.yaml' contains configuration needed to customize ReadTheDocs input and output behavior. It is stored in the root folder (warning) of your project. Please follow the instructions below.

  1. Compare the version of the file currently used in your repository with the (basic) version provided in the examples
  2. If required, change the file in your repository

Also compare the version used in your repository with the example provided in the 'doc' repo and update if required.  Be careful if your active configuration file was already extended. 

EXAMPLE: example '.readthedocs.yaml', same for 'master' branch and '{release}'

2.6

Update ReadTheDocs configuration file 'ribbon.css'

RELEASE: main + maintenance (opt)

BRANCH: 'master'

FILE: {repository}/docs/_static/css/ribbon.css

DESCR: The ReadTheDocs configuration file 'ribbon.css' has - among others - an effect on the width of a RTD documentation page. The width has been limited to ensure good readability. Please follow the instructions below.

  1. Compare the version of the file currently used in your repository with the (basic) version provided in the examples
  2. If required, change the file in your repository

Also compare the version used in your repository with the example provided in the 'doc' repo and update if required. Be careful if your active configuration file was already extended. 

EXAMPLE #1: example 'ribbon.css', same for 'master' branch and '{release}'

EXAMPLE #2: active 'ribbon.css', same for 'master' branch and '{release}'

2.7

Update your project release notes

RELEASE: main + maintenance (opt)

BRANCH: 'master'

FILE: e.g. {repository}/docs/release-notes.rst

DESCR: The file contains a description of the latest changes in your project/repo. Update it accordingly for the new release. If there was no change in your project, please add a line about this fact as well.

EXAMPLE: n/a

2.8

Update your documentation files

RELEASE: main + maintenance (opt)

BRANCH: 'master'

FILE: e.g. {repository}/docs/...

DESCR: Update the files accordingly for the new release. (info) Advice: Updating ReadTheDocs documents as needed while delivering user stories might be a good approach to prevent a big batch update at the end of each release.

EXAMPLE: n/a

3.0

RELEASE BRANCH PREPARATION

3.1

Create new branch of your repository using gerrit

RELEASE: main

BRANCH: source/initial='master', target/new='{release}'

FILE: n/a

DESCR: Please follow the instructions below.

  1. Open https://gerrit.onap.org/r/admin/repos, select your repository and list available branches
  2. Use [CREATE NEW] function on the top right corner
  3. Set 'Branch name' to the name of the upcoming release (e.g. 'istanbul')
  4. Set 'Initial revision' to 'master'
  5. Use [CREATE] to create the new branch

Note: You are not allowed to delete a branch. If you need to (maybe due to a typo in the process of creation) you have to raise a ticket at the LF IT Support.

(warning) IMPORTANT: To trigger the documentation build in ReadTheDocs, you must change at least one of the ReStructuredText files (.rst) in the new branch. Only branching the repository does not trigger the RTD doc build process. Consequently the '{release}' version of documentation is missing in RTD.

3.2

Clone '{release}' branch of your repository to your local development environment

RELEASE: main + maintenance

BRANCH: {release}

FILE: all

DESCR: Please use the command below.

git clone --branch <newbranch> ssh://<username>@gerrit.onap.org:29418/{repository}

Now you can start to modify files in the new branch.

4.0

RELEASE BRANCH UPDATES

4.1

Set correct 'defaultbranch' in '.gitreview'

RELEASE: main

BRANCH: {release}

FILE: {repository}/.gitreview

DESCR: Add/update the 'defaultbranch' entry ('defaultbranch={release}'). This can help to avoid that changes are accidentally committed or even published to a wrong branch. Add/update the 'project' entry to show the name of your project.

EXAMPLE: active '.gitreview' for 'jakarta' branch, 'doc' project

 

4.2

Update Sphinx build configuration file 'conf.py'

RELEASE: main + maintenance (opt)

BRANCH: {release}

FILE: {repository}/docs/conf.py

DESCR: The Sphinx build configuration file 'conf.py' contains configuration needed to customize Sphinx input and output behavior. Please follow the instructions below.

  1. Set 'release' and 'version' to '{release}'.
  2. Set 'branch' to '{release}'.

EXAMPLE: example 'conf.py' for '{release}' branch


 

4.3

Update Tox configuration file 'tox.ini'

RELEASE: main

BRANCH: {release}

FILE: {repository}/tox.ini

DESCR: The file is required to customize different tox environments. Compare the version used in your repository with the example provided in the 'doc' repo and update if required.  Be careful if your active configuration file was already extended.

  1. Set correct branch {release} for all (warning) lines containing:

-chttps://git.onap.org/doc/plain/etc/upper-constraints.onap.txt?h={release}

EXAMPLE #1: example 'tox.ini' for 'release' branch

 

4.4

Update at least one .rst file to trigger the RTD build

RELEASE: main

BRANCH: {release}

FILE: n/a

DESCR: To trigger the documentation build in ReadTheDocs, you must change at least one of the ReStructuredText files (.rst) in the new branch. Only branching the repository does not trigger the RTD doc build process. Consequently the '{release}' version of documentation is missing in RTD.

EXAMPLE: n/a

5.0

IMPROVEMENTS FOR THIS PROCEDURE

5.1

Improvements (to be discussed)

  • update release date in project/repo release note?
  • add corresponding milestone to a task (if applicable)?
  • No labels