Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Current »

Page Status: Updated for Istanbul - 

Component Status: Approved

Last Reviewed on:  

Certified by: Toine Siebelink  


1. High Level Component Definition and Architectural Relationships 


The Configuration Persistence Service (CPS) provides storage for real-time run-time configuration and operational parameters that need to be used by ONAP.

Since R8, Honolulu, the CPS is a stand-alone component. Project page describing eventual scope and ambition is here: Configuration Persistence Service Project

This page reflects the CPS for Istanbul.

2. API definitions

Configuration Persistence Service provides the following interfaces:


Interface Name

Interface Definition

 Interface CapabilitiesProtocol

Honolulu Status

Consumed ModelsAPI Spec (Swagger)
CPS-E-01Provides remote clients with model LCM
Add model (to dataspace)
Remove model (from dataspace)
RESTAvailableAny model defined by YANG language

Read the docs

CPS-E-02Generic data mutation interface

Create an anchor

Delete an anchor

Create data

Delete data

Update data

RESTAvailableNARead the docs
CPS-E-03Generic read/query interface

Read data

Query data

RESTAvailableNARead the docs
CPS-E-04Change notificationsSubscribe to DMaaP for changes to dataDMaaPNot available
TBD
CPS-E-05xNF data access

Create data

Delete data

Update data

Read data

Query data

RESTIn scopeNACPS-391Spike: Define and Agree NCMP REST Interface
CPS-E-06Temporal data access

Read data

Query data

RESTIn scopeNACPS-251 Define REST Query interface for Temporal service
CPS-E-07Administration interface

Low level DB access for administration and troubleshooting

Service interfaces for a GUI

VariousNot availableNATBD
Note:   xxxI interface is a Component internal interface.  xxxxE interface is a component external interface

CPS consumes the following Interfaces:


Interface NamePurpose Reason For UseAPI Spec (Swagger)Istanbul status
SDCE-6

This interface is used to receive the service and resource artifacts (CSAR Package) from SDC.

This allows the C&PS DB to process the design-time Yang model artifacts onboarded.

STEPS:

(1) ONBOARDING - A vendor onboards artifacts describing the parameters supported for their PNFs and VNFs in xNF Package.

(2) SDC CATALOG - The onboarded artifacts are stored in the SDC Catalog after onboarding and validated (VNF-SDK).

(3) CSAR DISTRIBUTION - The contents of the artifacts are distributed by SDC in a CSAR package onto the DMaaP bus.

(4) SETTING UP CPS - S/W to setup the CPS using the content of the CSAR package consumes the SDC CSAR Package.


Not used. xNF model will be retrieved directly from the xNF
AAIE-1This interface is used to automatically add/remove xNF data from CPS in line with xNF presence in AAI


ODL rests bundle. Provided by SDNCThis interface is used to read and update data on the xNF

Reading and writing will be used.


3. Configuration Persistence Service Component Description:

A more detailed figure and description of the component.

PURPOSE:

  • REPOSITORY -  The types of data that is stored in the Run-Time data storage repository for:

    • (1) CONFIGURATION PARAMETERS used by xNFs in run time. For example 5G Network run-time instance configuration information. and

    • (2) OPERATIONAL PARAMETERS used by ONAP and xNFs. Exo-inventory information is information that doesn't belong in A&AI.

    • (3) COMPONENT DATA used by ONAP components to persist data does not belong in A&AI and is not part of the xNF models.
  • DATA LAKE - It is designed to be a common services data layer which can serve as a data lake for xNF data.
  • SYNCING - The RunTime DB enables the ability to sync data between ONAP & the xNFs. (The source of truth can be defined). (FUTURE)
  • CM FUNCTIONS - Enables OSS configuration, optimization, and LCM operations. (FUTURE)
  • CM FUNCTIONS - Enables future CM & Data management functions such as xNF Crash restoration, data restoration, data history management and auditing. (FUTURE)
  • CENTRAL/DISTRIBUTED - Because it is a common service, it is part of an ONAP installation, so it could be deployed with either an Edge ONAP installation or a centralized ONAP installation. (FUTURE)
  • SCOPE - The Run Time DB could also serve as the data storage to store for example ONAP Policy Rules, CLAMP Control Loop, Operational Views (FUTURE) and also accommodate other resources.

ACCESS (READ/WRITE):

  • xNF Data - Run-Time parameters can be READ/WRITE by any ONAP platform component and any ONAP plug-in via the xNF data access interface. Examples of ONAP platform components are A&AI, SDC, SDNC etc.

  • Non-xNF Data - Parameters can be READ/WRITE by owner.

  • ACCESS CONTROL - The data owner may grant permission to other components to READ and/or WRITE non-xNF data.  (FUTURE)

SYNCING (INVENTORY):

  • ELEMENT SYNC - Software keeps the A&AI elements with the elements in the RunTime DB in Sync. 

  • A&AI - A&AI is still the master of valid entities in the network and provides a dynamic view of the assets (xNFs) available to ONAP
  • CPS (xNF Proxy) - The CPS is the owner (within ONAP) of the associate (exo-inventory) data associated with the xNFs.
  • DYNAMIC VIEW - When a xNF appears or is removed from the system, CPS records will be added/removed based on A&AI entries.

3.1 Concepts

A dataspace is a logical separation of data within the CPS. Dataspaces are created by data owners.

An anchor is a logical separation of data within a dataspace. An anchor is associated with a set of YANG modules (model). Models are used to validate data. Anchors are created by data owners.

Anchor and dataspace concepts are described in a presentation here.

An owner is an ONAP component that is responsible for data in the CPS. Responsibility includes deciding how data is exposed to other ONAP components. Options being:

  1. Data is exposed via µService APIs – no direct access to data via CPS interfaces
  2. Data is exposed via CPS interfaces – requires registration/discovery and access control to be implemented (FUTURE)

Data ownership and access control are the mechanisms provided by CPS for ONAP to avoid uncontrolled coupling in the data layer.

4. Known system limitations

In Istanbul, the inventory, xNF models, and initial data may be provided by a temporary REST interface provided by the ONAP DMI plugin.

5. Used Models

RunTime DB uses the following models:

  • Inventory Model (Run time platform data model)
  • ran-network@2020-08-06.yang – static YANG model for Honolulu

6. System Deployment Architecture

CPS project (yelllow area in picture) will be deployed as several micro services:

  1. Blue ≡ CPS & NCMP µS – providing most interfaces described above
  2. Green ≡ ONAP DMI plug-in µS – providing integration with SDNC, AAI & SDC
  3. Orange ≡ Temporal stack µS – provides access to a temporal view of data
  4. Purple ≡ DBMS µS – One or more DBMS instances, optionally dedicated or shared for temporal and current CM data
  5. Brown ≡ TBDMT µS – Data model transformation and presentation (API Mapping)

7. New Capabilities in this Release

This release, CPS adds the following Capabilities:

  • xNF data CRUD
  • xNF data write forwarding
  • Temporal data access
  • AAI integration
  • SDNC integration

8. References

  1. Ongoing development: Configuration Persistence Service Developer's Landing Page
  2. CPS backlog: https://jira.onap.org/secure/RapidBoard.jspa?rapidView=228&view=planning.nodetail&quickFilter=713&issueLimit=100
  3. Deployment view: CPS-78: Deployment View






  • No labels