Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 110 Next »

Test update in progress for Guilin release and SO building block flow

Link to specification:

5G - PNF Plug and Play

PNF PNP message flow diagram

Rainy day scenario - PNF is sending registration request to ONAP where required AAI entry is not present:

Sunny day scenario - PNF is sending registration request to ONAP where required AAI entry is prepared by SO workflow:


PNF PNP deployment diagram

PNF PNP hardware requirements

  • ONAP - standard ONAP instance located in Wind River lab
  • 4 Virtual machines dedicated for PNF Simulator:
    • 2 VCPU
    • 8 GB of RAM
    • 32 GB of HDD

PNF PNP test cases

High-Level descriptions

Id.Test Case NameTest Case Description
T01Create and distribute service which contains PNF based on imported VSP Verification if in VID is present PNF enabled service.
T02PNF registration accepting when AAI entry created in advanceVerification if PNF resource registration is done properly when correct AAI record (based on correlationID) is present before first InventoryQuery is done by PRH.
Verification if AAI entries: ipaddress-v4-oam and ipaddress-v6-oam are updated correctly based on pnfRegistration message contents.
T03Delete pnf service and pnf resource


T04Delete pnf service instance and reasign pnf resource to another service instance


T05PNF registration rejected

Verification if PRH drops the PnfRegistration request when no AAI entry exists for the correlationID.
AAI entries shall not be created by PRH.

T06

PNF registration accepted when AAI entry is created using AAI API (without SO instantiation)

Verification if PNF resource registration is done properly when correct AAI record (based on correlationID) is present - created using AAI API
Verification if AAI entries: ipaddress-v4-oam and ipaddress-v6-oam are updated correctly based on correlationID.

Detailed descriptions

Test Case IDT01
Test Case Name

Create and distribute service which contains PNF based on imported VSP 

Description

Verification if in VID is present PNF enabled service.
Test case covers following steps from message flow in 5G - PNF Plug and Play:

ReleaseFrankfurt/Guilin
Preconditions
  1. Users with roles: Designer (Carlos Santana - cs0008),  Admin (demo) should be available

  2. Robot init sucesfully executed. In intsalation server followin script shoulkd be sucesfully ececuted. ~/oom/kubernetes/robot/demo-k8s.sh onap init

    ubuntu@onap-5915-rke-node:~$ ~/oom/kubernetes/robot/demo-k8s.sh onap init
Number of parameters:
2
KEY:
init
++ kubectl --namespace onap get pods
++ sed 's/ .*//'
++ grep robot
+ POD=dev-robot-6d67844b64-pgbx5
++ dirname ./demo-k8s.sh
+ DIR=.
+ SCRIPTDIR=scripts/demoscript
+ ETEHOME=/var/opt/ONAP
+ '[' ']'
++ kubectl --namespace onap exec dev-robot-6d67844b64-pgbx5 -- bash -c 'ls -1q /share/logs/ | wc -l'
+ export GLOBAL_BUILD_NUMBER=0
+ GLOBAL_BUILD_NUMBER=0
++ printf %04d 0
+ OUTPUT_FOLDER=0000_demo_init
+ DISPLAY_NUM=90
+ VARIABLEFILES='-V /share/config/robot_properties.py'
+ kubectl --namespace onap exec dev-robot-6d67844b64-pgbx5 -- /var/opt/ONAP/runTags.sh -V /share/config/robot_properties.py -d /share/logs/0000_demo_init -i InitDemo --display 90
Starting Xvfb on display :90 with res 1280x1024x24
Executing robot tests at log level TRACE
==============================================================================
Testsuites                                                                    
==============================================================================
Testsuites.Demo :: Executes the VNF Orchestration Test cases including setu...
==============================================================================
Initialize Customer And Models                                        | PASS |
------------------------------------------------------------------------------
Initialize SO Openstack Identity For V3                               | PASS |
------------------------------------------------------------------------------
Testsuites.Demo :: Executes the VNF Orchestration Test cases inclu... | PASS |
2 critical tests, 2 passed, 0 failed
2 tests total, 2 passed, 0 failed
==============================================================================
Testsuites                                                            | PASS |
2 critical tests, 2 passed, 0 failed
2 tests total, 2 passed, 0 failed
==============================================================================
Output:  /share/logs/0000_demo_init/output.xml
Log:     /share/logs/0000_demo_init/log.html
Report:  /share/logs/0000_demo_init/report.html
Testing StepsStepExpected Result
  1. Login to ONAP portal as a designer user
  2. Navigate to SDC application
  3. Navigate to ONBOARD tab

  4. Click on CREATE NEW VLM

  5. Fill all mandatory parameters

  6. Add License Key Group and fill all mandatory parameters

  7. Add Entitlement Pool and fill all mandatory parameters

  8. Add  Feature Group fill all mandatory parameters and add already created Entitlement Pool and License Key Group

  9. Add License Agreement fill mandatory parameters and add already created Feature Group

  10. Press Submit button and next COMMIT & SUBMIT button
  11. Navigate to ONBOARD tab

  12. Click on CREATE NEW VSP

  13. Fill all mandatory parameters:

    1. select Vendor defined in already created VLM
    2. Name will be used in next steps
    3. in ONBOARDING PROCEDURE select Network Package
  14. Click on warning under License Agreement
  15. Fill Licensing Version, License Agreement and Feature Groups from already created VLM
  16. Click on Overview from left menu and press SELECT FILE button.
  17. Select attached pNF.csar file from your PC
  18. Press Submit button and next COMMIT & SUBMIT button
  19. Navigate to Home tab
  20. Click on IMPORT button and select  IMPORT VSP
  21. Select previously created VSP and press IMPORT VSP button
  22. In newly opened window yoiu can moduify PNF name.
  23. Next click Create and Certify button
  24. Next press Certify button. Put comment message in Certification confirmation pop-up and press OK button
  25. Navigate to SDC tab / HOME menu
  26. Click on ADD + button and select  Add Service
  27. In HOME > Create new service > General page fill all mandatory fields (change service type from default a'lacarte to macro) and press Create button in right top corner
  28. Go to Composition in left menu
  29. In search box find crated PNF using its name
  30. Drag ad drop it to main view
  31. Next click Certify button
  32. Next Press Distribute button in left top corner
  33. Press Monitor button in left top corner and verify distribution status, use refresh button
  34. Re-login as a a demo user
  35. VID Navigate to  application
  36. From left menu select Browse SDC Service Models
  1. User is logged in
  2. SDC application is open
  3. ONBOARD CATALOG is visible
  4. New License Model window is present
  5. All mandatory parameters are fulfilled
  6. License Key Group is added
  7. Entitlement Pool is added
  8. Feature Group is added
  9. License Agreement is added
  10. VLM is submitted sucesfully
  11. VLM is visible

  12. New Software Product window is present

  13. All mandatory parameters are fulfilled

  14. Licensing Version, License Agreement and Feature Groups and warning is not present
  15. Licensing Version, License Agreement and Feature Groups are defined
  16. Select file window is opened
  17. File is selected
  18. File is sucesfully uploaded and VSP is submited
  19. Home tab is opened
  20. Import VSP window is presnet with list of dubmited VSPs
  21. Previously create VSP is imported as VSP and Create window is opened
  22. All modifications are present
  23. PNF is successfully Certified
  24. SDC application is open
  25. Page HOME > Create new service > General with fields that must be filled out is open
  26. Create/Update saved successfully message is present in left top corner
  27. Composition main view is open
  28. PNF is visible
  29. PNF is added to service
  30. Service is Cerified and ready for Distribution
  31. Distribute Distribute successfully message is present in left top corner
  32. Monitor main view is opened with information about distribution. Thesr should not be any errors.
  33. User is re-logged
  34. VID application is open
  35. In Browse SDC Service Models main view is present entry about newly created service - it can take couple of minutes ~ 15 minutes
Actual ResultsIn VID is present enabled PNF service.
Conclusion (Pass/Fail)
Testing Lab
Tester NameKrzysztof Kuzmicki

Test Case IDT02
Test Case Name

PNF registration accepting when AAI entry created in advance

Description

Verification if PNF resource registration is done properly when correct AAI record (based on correlationID) is present before first InventoryQuery is done by PRH.
Verification if AAI entries: ipaddress-v4-oam and ipaddress-v6-oam are updated correctly based on correlationID.

Test case covers following steps from message flow in 5G - PNF Plug and Play:

ReleaseFrankfurt/Guilin
Preconditions
  1. Created PNF and Service using Test Case T01 (Create and distribute service which contains PNF based on imported VSP )
Testing StepsStepExpected Result
  1. Get created service model in Test Case T01 curl --location --request GET 'https://{worker_ip}:30204/sdc2/rest/v1/catalog/services/serviceName/{service model name}/serviceVersion/1.0' \
    --header 'USER_ID: cs0008' \
    --header 'X-FromAppId: robot-ete' \
    --header 'Content-Type: application/json' \
    --header 'Accept: application/json' \
    --header 'Authorization: Basic YmVlcDpib29w'
  2. From response get following parameters
    • service_model_uuid → resp_json.uuid;
    • service_model_invariant_uuid -> resp_json.invariantUUID
    • nf_resource_name -> resp_json.componentInstances[0].name
    • nf_resource_uuid -> resp_json.componentInstances[0].customizationUUID
    • componentName -> resp_json.componentInstances[0].componentName
    • nf_model_invariant_uuid -> resp_json.invariantUUID
    • nf_model_uuid -> resp_json.uuid
    • nf_model_name -> resp_json.name
  3. Get owning entity id:
    curl -k -O --location --request GET 'https://{worker_ip}:30233/aai/v13/business/owning-entities?owning-entity-name=OE-Demonstration' \

    --header 'Content-Type: application/json' \
    --header 'X-FromAppId: dcae-curl' \
    --header 'x-transactionId: 9998' \
    --header 'Accept: application/json' \
    --header 'Authorization: Basic QUFJOkFBSQ=='

    From response get following parameter:

    • owningEntityId -> resp_json.owning-entity[0].owning-entity-id

  4. Get product family id:

    curl -k -O  --location --request GET 'https://{worker_ip}:30233/aai/v13/service-design-and-creation/services?service-description=gNB' \
    --header 'Content-Type: application/json' \
    --header 'X-FromAppId: dcae-curl' \
    --header 'x-transactionId: 9998' \
    --header 'Accept: application/json' \
    --header 'Authorization: Basic QUFJOkFBSQ=='

    From response get following parameter:

    • productFamilyId -> resp_json.service[0].service-id

  5. Fill SO_request.json with above paremeters and:
    • owningEntityName=OE-Demonstration
    • full_customer_name=Demonstration
    • platformName=Platform-Demonstration
    • lineOfBusinessName=LOB-Demonstration
    • service=gNB

    • nf_instance_name=<your pnf name - send by pnf>

  6. Send Instantiation request to SO

    curl -k  --request POST 'http://{worker_ip}:30277/onap/so/infra/serviceInstantiation/v7/serviceInstances' \
    --header 'Authorization: Basic SW5mcmFQb3J0YWxDbGllbnQ6cGFzc3dvcmQxJA==' \
    --header 'Content-Type: application/json' \
    --header 'Accept: application/json' \
    -d @SO_request.json

  7. Login to so-bpmn-infra pod via rke console:
    kubectl exec -it dev-so-bpmn-infra-<....> -n onap /bin/sh
    open debug.log
    vi logs/bpmn/debug.log
  8. Verify AAI entry for PNF created by SO service using command:

    curl --location --request GET 'https:///{worker_ip}:30233/aai/v17/network/pnfs/pnf/{nf_instance_name}' \
    --header 'Content-Type: application/json' \
    --header 'X-FromAppId: dcae-curl' \
    --header 'x-transactionId: 9998' \
    --header 'Accept: application/json' \
    --header 'Authorization: Basic QUFJOkFBSQ==' \
    --header 'Cookie: JSESSIONID=2F951F19C99CDAED4CA5AFB3DCCD5D61'

  9. Verify AAI entry for Service Instance created by SO service using command:

    curl --location --request GET 'https://{worker_ip}:30233/aai/v13/business/customers/customer/{full_customer_name}/service-subscriptions/service-subscription/{service}/service-instances/service-instance/{instanceId}' \
    --header 'Content-Type: application/json' \
    --header 'X-FromAppId: dcae-curl' \
    --header 'x-transactionId: 9998' \
    --header 'Accept: application/json' \
    --header 'Authorization: Basic QUFJOkFBSQ==' \
    --header 'Cookie: JSESSIONID=2F951F19C99CDAED4CA5AFB3DCCD5D61'

  10. Send PNF Registration request from real PNF or simulate it using following curl comand.
    • Fill registration_request.json:
      • set sourceName=nf_instance_nam
    • Send regitration request:

      curl -k --request POST 'https://{worker_ip}:30417/eventListener/v7' \
      --header 'Content-Type: application/json' \
      --header 'Authorization: Basic c2FtcGxlMTpzYW1wbGUx' \
      --header 'Cookie: JSESSIONID=17A9DC67B33C079DE46F4A304143A5C2' \
      -d @reqistration_request.json

  11. Verify if SO service has reacted on PNFReady message from PRH and has ended
  12. Once again Verify AAI entry for PNF created by SO service using command:

    curl --location --request GET 'https:///{worker_ip}:30233/aai/v17/network/pnfs/pnf/{nf_instance_name}' \
    --header 'Content-Type: application/json' \
    --header 'X-FromAppId: dcae-curl' \
    --header 'x-transactionId: 9998' \
    --header 'Accept: application/json' \
    --header 'Authorization: Basic QUFJOkFBSQ==' \
    --header 'Cookie: JSESSIONID=2F951F19C99CDAED4CA5AFB3DCCD5D61'

  13. Once again Verify AAI entry for Service Instance created by SO service using command:

    curl --location --request GET 'https://{worker_ip}:30233/aai/v13/business/customers/customer/{full_customer_name}/service-subscriptions/service-subscription/{service}/service-instances/service-instance/{instanceId}' \
    --header 'Content-Type: application/json' \
    --header 'X-FromAppId: dcae-curl' \
    --header 'x-transactionId: 9998' \
    --header 'Accept: application/json' \
    --header 'Authorization: Basic QUFJOkFBSQ==' \
    --header 'Cookie: JSESSIONID=2F951F19C99CDAED4CA5AFB3DCCD5D61'

  1. Service model is present
  2. Parameters are present
  3. Owning Entity ID is present
  4. Product Family ID is present
  5. SO_request.json is filled accordingly
  6. SO request is send successfully.

    Service_instance_id is saved from POST response (example of response: {"requestReferences":{"requestId":"10e2577f-3547-4e66-901d-b7b0c6e1d3ab","instanceId":"10004a65-20c4-44d2-bd27-53544fe99916","requestSelfLink":"http://10.183.42.156:30277/orchestrationRequests/v7/10e2577f-3547-4e66-901d-b7b0c6e1d3ab"}})

  7. In debug log should be presnet following entry:

    2020-08-20T20:59:35.865Z|87f367b7-5d84-47e9-a955-6b2143e8424a|o.o.l.filter.spring.SpringClientPayloadFilter - =======================response end=================================================
2020-08-20T20:59:35.875Z|87f367b7-5d84-47e9-a955-6b2143e8424a|o.o.s.b.i.pnf.dmaap.PnfEventReadyDmaapClient - registering for pnf ready dmaap event for pnf correlation id: test_pnf_name
2020-08-20T20:59:35.881Z|87f367b7-5d84-47e9-a955-6b2143e8424a|org.onap.so.client.RestClient - RestClientSSL using default SSL context!
2020-08-20T20:59:35.894Z|87f367b7-5d84-47e9-a955-6b2143e8424a|o.o.logging.filter.base.PayloadLoggingClientFilter - Sending HTTP POST (overridden to PATCH) to:https://aai.onap:8443/aai/v19/network/pnfs/pnf
/test_pnf_name with request headers:{Authorization=[***REDACTED***], X-RequestID=[87f367b7-5d84-47e9-a955-6b2143e8424a], X-FromAppId=[MSO], X-ONAP-PartnerName=[UNKNOWN], X-HTTP-Method-Override=[PATCH], Ac
cept=[application/json], X-InvocationID=[a9b7b7c1-4912-4e48-8f3a-df7cd3123a54], X-ECOMP-RequestID=[87f367b7-5d84-47e9-a955-6b2143e8424a], X-TransactionId=[], X-ONAP-RequestID=[87f367b7-5d84-47e9-a955-6b21
43e8424a], Content-Type=[application/merge-patch+json]}
2020-08-20T20:59:35.895Z|87f367b7-5d84-47e9-a955-6b2143e8424a|o.o.logging.filter.base.PayloadLoggingClientFilter - {"pnf-id":"f792d78d-7c2c-4858-980b-23968923b3f4","orchestration-status":"Register"}

2020-08-20T20:59:35.982Z|87f367b7-5d84-47e9-a955-6b2143e8424a|o.o.logging.filter.base.PayloadLoggingClientFilter - Response from method:POST (overridden to PATCH) performed on uri:https://aai.onap:8443/aa
i/v19/network/pnfs/pnf/test_pnf_name has http status code:200 and response headers:{Content-Length=[0], content-type=[application/json], Date=[Thu, 20 Aug 2020 20:59:35 GMT], Strict-Transport-Security=[ma
x-age=16000000; includeSubDomains; preload;], vertex-id=[254096], X-AAI-TXID=[2-aai-resources-200820-20:59:35:904-22741]}
2020-08-20T20:59:35.983Z|87f367b7-5d84-47e9-a955-6b2143e8424a|o.o.logging.filter.base.PayloadLoggingClientFilter - Response was returned with an empty entity.
2020-08-20T20:59:39.896Z||o.o.s.b.i.pnf.dmaap.PnfEventReadyDmaapClient - dmaap listener starts listening pnf ready dmaap topic
2020-08-20T20:59:54.485Z||o.o.s.b.i.pnf.dmaap.PnfEventReadyDmaapClient - dmaap listener starts listening pnf ready dmaap topic
2020-08-20T21:00:09.016Z||o.o.s.b.i.pnf.dmaap.PnfEventReadyDmaapClient - dmaap listener starts listening pnf ready dmaap topic

    especially following entries:
    correlation id: test_pnf_name same as nf_instance_name from SO request
    and
    dmaap listener starts listening pnf ready dmaap topic is pnf name

  8. Request is successful. Request should contain following values:

    • "pnf-name": equals to nf_instance_name

    • "orchestration-status":  in status Register

    • "relationship-list":  with information about service id (instanceId) to which PNF is connected

    • "model-invariant-id": equals to nf_model_invariant_uuid

    • "model-version-id": equals to nf_model_uuid

    • "ipaddress-v4-oam": should be missing

    • "ipaddress-v6-oam": should be missing

    • "equip-type": should be missing

    • "equip-vendor": should be missing

    • "equip-model": should be missing

    • "sw-version": should be missing

    • "serial-number": should be missing

    • "nf-role": should be missing

  9. Request is successful. Request should contain following values:

    • "service-instance-name": equals to service_model_name_nf_instance_name

    • "model-invariant-id": equals to service_model_invariant_uuid

    • "model-version-id": equals to service_model_uuid

    • "orchestration-status": equals to "Assigned",

    • "relationship-list":  with information pnf name  (nf_instance_name)
  10. Regitration request is send sucesfully.
  11. SO-BPMN pod in /app/logs/bpmn/debug.log should be present following message:
    2020-08-21T08:01:19.862Z||o.o.s.b.i.pnf.dmaap.PnfEventReadyDmaapClient - unregistering from pnf ready dmaap event for pnf correlation id: nf_instance_name
    2020-08-21T08:01:19.862Z||o.o.s.b.i.pnf.dmaap.PnfEventReadyDmaapClient - dmaap listener gets pnf ready event for pnfCorrelationId: nf_instance_name
    2020-08-21T08:01:19.930Z|626785f1-baea-427d-aa7a-cdfddc209f5d|org.onap.so.client.RestClient - RestClientSSL using default SSL context!

  12. Request is successful. Request should contain following values:

    • "pnf-name": equals to nf_instance_name

    • "orchestration-status":  in status Active

    • "relationship-list":  with information about service id (instanceId) to which PNF is connected

    • "model-invariant-id": equals to nf_model_invariant_uuid

    • "model-version-id": equals to nf_model_uuid

    • "ipaddress-v4-oam": should be filled according to registration_request,json

    • "ipaddress-v6-oam": should be filled according to registration_request,json

    • "equip-type": should be filled according to registration_request,json

    • "equip-vendor": should be filled according to registration_request,json

    • "equip-model": should be filled according to registration_request,json

    • "sw-version": should be filled according to registration_request,json

    • "serial-number": should be filled according to registration_request,json

    • "nf-role": should be filled according to registration_request,json

  13. Request is successful. Request should contain following values:

    • "service-instance-name": equals to service_model_name_nf_instance_name

    • "model-invariant-id": equals to service_model_invariant_uuid

    • "model-version-id": equals to service_model_uuid

    • "orchestration-status": equals to Active

    • "relationship-list":  with information pnf name  (nf_instance_name)
Actual ResultsPNF registration is accepted and AAI entries: ipaddress-v4-oam and ipaddress-v6-oam are updated correctly based on correlationID. SO service is instantieted.
Conclusion (Pass/Fail)
Testing Lab
Tester NameKrzysztof Kuzmicki



Test Case IDT03
Test Case Name

Delete pnf service and pnf resource

Description
ReleaseGuilin
Preconditions
Testing StepsStepExpected Result


Actual Results


Conclusion (Pass/Fail)
Testing Lab
Tester NameKrzysztof Kuzmicki

Test Case IDT04
Test Case Name

Delete pnf service instance and reassign pnf resource to another service instance

Description
ReleaseGuilin
Preconditions
Testing StepsStepExpected Result


Actual Results


Conclusion (Pass/Fail)
Testing Lab
Tester NameKrzysztof Kuzmicki
Test Case IDT05
Test Case Name

PNF registration rejected

Description

Verification if PRH drops the PnfRegistration request when no AAI entry exists for the correlationID.
AAI entries shall not be created by PRH.

Test case covers following steps from message flow in 5G - PNF Plug and Play:

ReleaseCasablanca
Preconditions
  1. Up and running PnP PNF Simualtor according to https://wiki.onap.org/display/DW/PnP+PNF+Simulator
Testing StepsStepExpected Result
  1. Verify AAI entry created by SO service using command:
    curl -X GET -k -H "accept: application/json" -H "Real-Time: true" -H "Content-Type: application/json" -H "X-FromAppId: dcae-curl" -H "x-transactionId: 9998" "https://AAI:AAI@<kubernetes noed ip address>:<aai service port>/aai/v11/network/pnfs/pnf/<correlationID>"
  2. Login to virtual machine with simulator
  3. In config.json file :
    1. fill value for sourceName
    2. fill pnfOamIpv4Address, pnfOamIpv6Address with some value
  4. Run script ./simulator.sh run simulator in order to start sending registration request messages
  5. Download  PRH logs and check that registration requests has been rejected.
  6. Once again verify AAI entry created by SO service using command:
    curl -X GET -k -H "accept: application/json" -H "Real-Time: true" -H "Content-Type: application/json" -H "X-FromAppId: dcae-curl" -H "x-transactionId: 9998" "https://AAI:AAI@<kubernetes noed ip address>:<aai service port>/aai/v11/network/pnfs/pnf/<correlationID>"
  1. Command should return HTTP 400 code
  2. User is logged in
  3. config.json file is updated accordingly

  4. PnP PNF simulator sends registration request
  5. In PRH log should appear following message:
    "org.onap.dcaegen2.services.prh.exceptions.AAINotFoundException: Incorrect response code for continuation of tasks workflow"
  6. Command should return HTTP 400 code
Actual Results

PNF registration is rejected and AAI entries has not be created.

Conclusion (Pass/Fail)
Testing Lab
Tester NameKrzysztof Kuzmicki
Test Case IDT06
Test Case Name

PNF registration accepted when AAI entry is created using AAI API (without SO instantiation)

Description

Verification if PNF resource registration is done properly when correct AAI record (based on correlationID) is present - created using AAI API
Verification if AAI entries: ipaddress-v4-oam and ipaddress-v6-oam are updated correctly based on correlationID.

Test case covers following steps from message flow in 5G - PNF Plug and Play:

ReleaseCasablanca
Preconditions
  1. Up and running PnP PNF Simualtor according to https://wiki.onap.org/display/DW/PnP+PNF+Simulator
Testing StepsStepExpected Result
  1. Create PNF entry AAI entry using AAI API
    curl -i -X PUT -k -H "accept: application/json" -H "Real-Time: true" -H "Content-Type: application/json" -H "X-FromAppId: dcae-curl" -H "x-transactionId: 9998" -d '{"pnf-name":"<correlationID>","pnf-name2":"example-pnf-name2-val-78244","pnf-name2-source":"example-pnf-name2-source-val-99275","pnf-id":"example-pnf-id-val-7989","equip-type":"example-equip-type-val-20348","equip-vendor":"example-equip-vendor-val-52182","equip-model":"example-equip-model-val-8370","management-option":"example-management-option-val-72881", "ipaddress-v4-oam": "", "ipaddress-v6-oam": ""}' "http://AAI:AAI@<kubernetes noed ip address>:<aai service port>/aai/v11/network/pnfs/pnf/<correlationID>"
  2. Verify AAI entry:
    curl -X GET -k -H "accept: application/json" -H "Real-Time: true" -H "Content-Type: application/json" -H "X-FromAppId: dcae-curl" -H "x-transactionId: 9998" "https://AAI:AAI@<kubernetes noed ip address>:<aai service port>/aai/v11/network/pnfs/pnf/<correlationID>"
  3. Login to each virtual machine with simulator
  4. In config.json file :
    1. fill value for sourceName key - use correlationId value used during service instantiation in prerequisite no. 3
    2. fill pnfOamIpv4Address, pnfOamIpv6Address with some value
  5. Run script ./simulator.sh run simulator in order to start sending registration request messages 
  6. Once again verify AAI entry created by SO service  4 PNFs using command:
    curl -X GET -k -H "accept: application/json" -H "Real-Time: true" -H "Content-Type: application/json" -H "X-FromAppId: dcae-curl" -H "x-transactionId: 9998" "https://AAI:AAI@<kubernetes noed ip address>:<aai service port>/aai/v11/network/pnfs/pnf/<correlationID>"
  7. Verify available message in Message Router topic
    curl -i -X GET http://<kubernetes noed ip address>:<message router service port>/events/unauthenticated.PNF_READY/2/1
  1. Command should return HTTP 202 code
  2. Command should return JSONs
    with empty value for IPv4 and IPv6 address
  3. User is logged in
  4. config.json file is updated accordingly
  5. PnP PNF simulator sends registration request
  6. Command should return JSONs with  IPv4 and IPv6 address filled accordingly with inputs from simulator's config.json
  7. Command should return JSONs with  IPv4, IPv6 and correlationID filled accordingly with inputs from simulator's config.json
Actual Results

PNF registration is accepted and AAI entries: ipaddress-v4-oam and ipaddress-v6-oam are updated correctly based on correlationID

Conclusion (Pass/Fail)
Testing Lab
Tester NameKrzysztof Kuzmicki

PNF PnP Casablanca demo

Theoretical introduction

PnP_PNF_theory.mp4

Live demo

PnP_PNF_live_demo.mp4

  • No labels