Helm Cloudify Plugin

Introduction

DCAE Platform in Dublin release supports new feature to deploy components via helm chart. This is enabled by integrating Helm Cloudify plugin into Cloudify Manager instance DCAE-Platform uses to deploy other required services. The cloudify plugin itself is under CCSDK project delivered part of Casablanca. For Dublin, this plugin has been integrated into DCAE ONAP deployment.

Dublin Scope

The helm plugin was intended to support deployment scenario of stand-alone application similar to capability offered under OOM. With this plugin integration, any charts packaged under ONAP OOM can be deployed through DCAE platform in ONAP. This provides an opportunity for operators to use a single orchestration through Cloudify for deploying both Helm and Toscal work flows if required.

As all DCAE MS currently are TOSCA work flow based, the helm plugin is not used for DCAE component deployment.

Artifacts

Repository Path: /org.onap.ccsdk.platform.plugins/plugins/helm-4.0.1-py27-none-linux_x86_64.wgn

Blueprint Template:

# ============LICENSE_START==========================================
# ===================================================================
# Copyright (c) 2019 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#         http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#============LICENSE_END============================================
tosca_definitions_version: cloudify_dsl_1_3

imports:
  - http://www.getcloudify.org/spec/cloudify/4.3.1/types.yaml
  - "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.ccsdk.platform.plugins/type_files/helm/4.0.0/helm-type.yaml"

inputs:
  tiller-server-ip:
    description: IP address of Kubernetes master node
  tiller-server-port:
    description: Nodeport of tiller server
  namespace:
    description: Target namespace to be installed under (requires to be new)
  chart-repo-url:
     default: https://nexus.onap.org/content/sites/oom-helm-staging
  chart-version :
    description: Chart version for identified component-name
  stable-repo-url:
    description: URL for stable repository
    type: string
    default: 'https://kubernetes-charts.storage.googleapis.com'
  config-url:
    default: ''
  config-format:
    default: 'yaml'
  component-name:
    description: onap component name
node_templates:
  dcaecomponent:
    type: onap.nodes.component
    properties:
      tiller-server-ip: { get_input: tiller-server-ip }
      tiller-server-port: { get_input: tiller-server-port }
      component-name: { get_input: component-name }
      chart-repo-url: { get_input: chart-repo-url }
      chart-version: { get_input: chart-version }
      namespace: { get_input: namespace }
      stable-repo-url: { get_input: stable-repo-url}
      config-url:  { get_input: config-url}
      config-format: { get_input: config-format}
outputs:
  dcaecomponent_install_status:
    value: { get_attribute: [ dcaecomponent, install-status ] }

There is also option to override the defaults using values.yaml equivalent using following blueprint template

Helm Template with Override

# ============LICENSE_START==========================================
# ===================================================================
# Copyright (c) 2019 AT&T
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#         http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#============LICENSE_END============================================
tosca_definitions_version: cloudify_dsl_1_3

imports:
  - http://www.getcloudify.org/spec/cloudify/4.3.1/types.yaml
  - "https://nexus.onap.org/service/local/repositories/raw/content/org.onap.ccsdk.platform.plugins/type_files/helm/4.0.0/helm-type.yaml"

inputs:
  tiller-server-ip:
    description: IP address of Kubernetes master node
  tiller-server-port:
    description: Nodeport of tiller server
  namespace:
    description: Target namespace to be installed under (requires to be new)
  chart-repo-url:
     default: https://nexus.onap.org/content/sites/oom-helm-staging
  chart-version :
    description: Chart version for identified component-name
  stable-repo-url:
    description: URL for stable repository
    type: string
    default: 'https://kubernetes-charts.storage.googleapis.com'
  config-url:
    default: ''
  config-format:
    default: 'yaml'
  component-name:
    description: onap component name
node_templates:
  onap_env:
    type: onap.nodes.component
    properties:
      tiller-server-ip: { get_input: tiller-server-ip }
      tiller-server-port: { get_input: tiller-server-port }
      component-name: onap
      chart-repo-url: { get_input: chart-repo-url }
      chart-version: { get_input: chart-version }
      namespace: { get_input: namespace }
      stable-repo-url: { get_input: stable-repo-url}
      config: '{ "aaf": {"enabled": false}, "aai": {"enabled": false}, "appc": {"enabled": false}, "clamp": {"enabled": false}, "cli": {"enabled": false}, "consul": {"enabled": false}, "dcaegen2": {"enabled": false}, "dmaap": {"enabled": false}, "esr": {"enabled": false}, "log": {"enabled": false}, "sniro-emulator": {"enabled": false}, "msb": {"enabled": false}, "multicloud": {"enabled": false}, "nbi": {"enabled": false}, "oof": {"enabled": false}, "policy": {"enabled": false}, "pomba": {"enabled": false}, "portal": {"enabled": false}, "robot": {"enabled": false}, "sdc": {"enabled": false}, "sdnc": {"enabled": false}, "so": {"enabled": false}, "uui": {"enabled": false}, "vfc": {"enabled": false}, "vid": {"enabled": false}, "vnfsdk": {"enabled": false} }'

  dcaecomponent:
    type: onap.nodes.component
    properties:
      tiller-server-ip: { get_input: tiller-server-ip }
      tiller-server-port: { get_input: tiller-server-port }
      component-name: { get_input: component-name }
      chart-repo-url: { get_input: chart-repo-url }
      chart-version: { get_input: chart-version }
      namespace: { get_input: namespace }
      stable-repo-url: { get_input: stable-repo-url}
      config-url:  { get_input: config-url}
      config-format: { get_input: config-format}
    relationships:
      - type: cloudify.relationships.connected_to
        target: onap_env
outputs:
  dcaecomponent_install_status:
    value: { get_attribute: [ dcaecomponent, install-status ] }

Pre-Configuration Steps

Helm needs to be installed on the CM pod

kubectl exec -n onap <Cloudify Manager pod> /bin/bash

wget http://storage.googleapis.com/kubernetes-helm/helm-v2.9.1-linux-amd64.tar.gz
tar -zxvf helm-v2.9.1-linux-amd64.tar.gz
sudo mv linux-amd64/helm /usr/local/bin/helm

2. Tiller service should be updated to expose a nodeport

kubectl edit svc -n kube-system tiller-deploy -o yaml
# Assign an unused nodeport available in cluster

Installation

Both above templates are loaded into DCAE bootstrap pod for convenience

Note: Explanation of parameters are documented under CCSDK wiki page : Introduction of Helm Plugin

Future Enhancement

Requires changing nodeport for tiller; since the deployment is done from bootstrap pod, clusterip/port must also be supportable
Existing namespace cannot be used currently
Deployment error not being logged