Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 10
Next »
POMBA Data Router
HTTPS Support
Test Case | Description | Status | Owner | Date | JIRA link | Comment |
---|
data-router | deployment | https | Verify that the POMBA data-router can be deployed using HTTPS as a configurable parameter. | PASS | |
|
LOG-559
-
Getting issue details...
STATUS
| |
data-router | orchestration-initiation | https | Verify that an orchestration-event can be published to the data-router over HTTPS | PASS | |
|
LOG-559
-
Getting issue details...
STATUS
|
|
data-router | orchestration-initiation | https | Verify that the data-router rejects the orchestration-event if sent via HTTP | PASS | |
|
LOG-559
-
Getting issue details...
STATUS
|
|
data-router | server-side certificates | https | The purpose of the test is to validate that the orchestration-event to data-router can only be successful with server-side certificates | PASS | |
|
LOG-559
-
Getting issue details...
STATUS
|
|
data-router | server-side certificates | The purpose of the test is to validate that the orchestration-event to data-router will be rejected if the server-side certificates are not loaded | PASS | |
|
LOG-559
-
Getting issue details...
STATUS
|
|
Context Builder: SDNC
OOM
Test Case | Description | Status | Owner | Date | JIRA link | Comment |
---|
oom deployment | Verify that the SDNC Context Builder is capable of being deployed through OOM. | PASS | |
|
LOG-426
-
Getting issue details...
STATUS
| |
oom deletion | Verify that the SDNC Context Builder is capable of being deleted form a POMBA deployment. | PASS | |
|
LOG-426
-
Getting issue details...
STATUS
|
|
SDNC Seed Code w/ Generic Resources API
Test Case | Description | Status | Owner | Date | JIRA link | Comment |
---|
context aggregator | builders | properties | sdnc.properties | Verify that the Context Aggregator config/builders/ directory contains an sdnc.properties file upon deployment so that the builder can be utilized in audits. | PASS | |
|
LOG-520
-
Getting issue details...
STATUS
| |
sdnccontextbuilder | service | context | basic auth | Verify that the SDNC Context Builder can successfully process an incoming context request using basic authentication. | PASS | |
|
LOG-520
-
Getting issue details...
STATUS
|
|
sdnccontextbuilder | service | context | basic auth | bad credentials | Verify that the SDNC Context Builder rejects requests that do not provide the correct credentials. | PASS | |
|
LOG-520
-
Getting issue details...
STATUS
|
|
context aggregator -> sdnc context builder | Verify that the Context Aggregator is capable of interoperating with the SDNC Context Builder. | PASS | |
|
LOG-520
-
Getting issue details...
STATUS
|
|
sdnc context builder -> sdnc | Verify that the SDNC Context Builder is capable of interoperating with an SDNC. | PASS | |
|
LOG-520
-
Getting issue details...
STATUS
|
|
POMBA APIv1
Test Case | Description | Status | Owner | Date | JIRA link | Comment |
---|
sdnccontextbuilder | v1 | service | context | Verify that the SDNC Context Builder context API can be called while explicitly referencing the version (v1). | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
| |
sdnccontextbuilder | service | context | Verify that when the API version for the SDNC Context Builder is not explicitly specified, the latest version (APIv1) will be invoked. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
sdnccontextbuilder | v1 | service | context | vservers fields | Verify that the SDNC Context Builder can return the full list of required attributes associated with one or more vservers associated with a service instance. The attribute values should be obtained from the correct source attributes. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
sdnccontextbuilder | v1 | service | context | l3-networks fields | Verify that the SDNC Context Builder can return the full list of required attributes associated with one or more l3-networks associated with a service instance. The attribute values should be obtained from the correct source attributes. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
sdnccontextbuilder | v1 | service | context | serviceInstanceId missing | Verify that the SDNC Context Builder returns a 400 error when the required serviceInstanceID parameter is missing. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
sdnccontextbuilder | v1 | service | context | X-TransactionId missing | Verify that the SDNC Context Builder is capable of processing a context request that omits the X-TransactionId header. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
sdnccontextbuilder | v1 | service | context | X-FromAppId missing | Verify that the SDNC Context Builder reutrns a 400 error processing a context request that omits the X-FromAppId header. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
sdnccontextbuilder | v1 | service | context | SDNC not available | Verify that the SDNC Context Builder returns a 500 error when the SDNC from which data is to be obtained is not available. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
sdnccontextbuilder | v1 | service | context | service not found | Verify that the SDNC Context Builder returns a 404 error when the service instance for which context is requested cannot be located in the SDNC. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
sdnccontextbuilder | logging | success | Verify that the SDNC Context Builder provides sufficient logging when a context request is successfully processed. |
| |
|
LOG-462
-
Getting issue details...
STATUS
| Logging for the sdncctxbuilder will be tested on the next phase of the epic |
sdnccontextbuilder | logging | failure | bad request | Verify that the SDNC Context Builder provides sufficient logging when a context request is unsuccessfully processed due to a missing parameter. |
| |
|
LOG-462
-
Getting issue details...
STATUS
| Logging for the sdncctxbuilder will be tested on the next phase of the epic |
sdnccontextbuilder | v1 | swagger | Verify that the SDNC Context Builder provides swagger documentation for v1 of the Context Builder API. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
wiki | Verify that the wiki documentation provides a suitable description of the SDNC Context Builder APIv1. | PASS | |
|
LOG-462
-
Getting issue details...
STATUS
|
|
API Mapper w/ VNF API
Test Case | Description | Status | Owner | Date | JIRA link | Comment |
---|
default config | context request | service type | vFW | Verify that, using the default configuration, the VNF API is utilized when the SDNC Context Builder detects that the service instance is of type "vFW". | PASS | |
|
LOG-421
-
Getting issue details...
STATUS
| |
default config | context request | service type | vDNS | Verify that, using the default configuration, the VNF API is utilized when the SDNC Context Builder detects that the service instance is of type "vDNS". | PASS | |
|
LOG-421
-
Getting issue details...
STATUS
|
|
default config | context request | service type | non-vFW/vDNS | Verify that, using the default configuration, the GENERIC-RESOURCE-API is utilized when the SDNC Context Builder detects that the service instance isn't of the type vFW or vDNS. | PASS | |
|
LOG-421
-
Getting issue details...
STATUS
|
|
generic-resource-api | common model support | vserver | Verify that when the SDNC Context Builder utilizes the Generic Resource API to gather service data, the output is able to pass along all of the mandatory vserver attributes. | PASS | |
|
LOG-421
-
Getting issue details...
STATUS
|
|
generic-resource-api | common model support | l3-network | Verify that when the SDNC Context Builder utilizes the Generic Resource API to gather service data, the output is able to pass along all of the mandatory l3-network attributes. | PASS | |
|
LOG-421
-
Getting issue details...
STATUS
|
|
rules modification | Verify that the rules used to select which API should be used to gather service data can be changed. | PASS | |
|
LOG-421
-
Getting issue details...
STATUS
|
|
context request | aai unavailable | Verify that an error is returned when the SDNC Context Builder is unable to contact the AAI and cannot, therefore, determine ServiceType for rules mapping | PASS | |
|
LOG-421
-
Getting issue details...
STATUS
|
|
developer wiki | Verify that the developer wiki has been updated to include information about the API mapping feature in SDNC Context Builder, including how to modify the mapping rules | PASS | |
|
LOG-421
-
Getting issue details...
STATUS
|
|
POMBA Reporting
https support for Kibana
Test Case | Description | Status | Owner | Date | JIRA link | Comment |
---|
oom deployment | Verify that the pomba-kibana dashboard can be deployed via an allowed HTTPS only configuration | PASS | J. Ram Balasubramanian |
|
LOG-517
-
Getting issue details...
STATUS
|
|
oom deployment | Generate new self signed certificate and verify HTTPS connection after deployment | PASS | J. Ram Balasubramanian |
|
LOG-517
-
Getting issue details...
STATUS
|
|
kibana dashboard access | Verify that the kibana dashboard can only be accessed via HTTPS when configured | PASS | J. Ram Balasubramanian |
|
LOG-517
-
Getting issue details...
STATUS
|
|
kibana dashboard access | Verify that pomba reports are posted and are view-able by Kibana | PASS | J. Ram Balasubramanian |
|
LOG-517
-
Getting issue details...
STATUS
|
|
A&AI Context Builder
L2 Fabric Retrieval - PNF
Test Case | Description | Status | Owner | Date | JIRA link | Comment |
---|
pnf | aai | aaictxbuilder | Verify that the latest aaictxbuilder can query AAI and return the required attributes | PASS | J. Ram Balasubramanian |
|
LOG-764
-
Getting issue details...
STATUS
|
|
pnf | aai | aaictxbuilder | Verify that the latest aaictxbuilder can query AAI and return the required attributes | PASS | J. Ram Balasubramanian |
|
LOG-764
-
Getting issue details...
STATUS
|
|