This wiki describes how to set up a Kubernetes cluster with kuberadm, and then deploying APPC within that Kubernetes cluster.
(To view the current page, Chrome is the preferred browser. IE may add extra "CR LF" each line, which causes problems).
What is OpenStack? What is Kubernetes? What is Docker?
In the OpenStack lab, the controller executes the function of partitioning resources. The compute nodes are the collection of resources (memory, CPUs, hard drive space) to be partitioned. When creating a VM with "X" memory, "Y" CPUs and "Z" hard drive space, OpenStack's controller reviews its pool of available resources, allocates the quota, and then creates the VM on one of the available compute nodes. Many VMs can be created on a single compute node. OpenStack's controller uses a lot of criteria to choose a compute node, but if an application spans multiple VMs, Affinity rules can be used to ensure the VMs don’t congregate on a single compute node. This would not be good for resilience.
Kubernetes is similar to OpenStack in that it manages resources. Instead of scheduling VMs, Kubernetes schedules Pods. In a Kubernetes cluster, there is a single master node and multiple worker nodes. The Kubernetes’s master node is like the OpenStack controller in that it allocates resources for Pods. Kubernetes worker nodes are the pool of resources to be allocated, similar to OpenStack’s compute nodes. Pods, like VMs, can have Affinity rules configured in order to increase Apps resilience.
If you would like more information on these subjects, please explore these links:
Deployment Architecture
The Kubernetes deployment in this tutorial will be set up on top of OpenStack VMs. Let's call this the undercloud. undercloud can be physical boxes, or VMs. The VMs can come from different cloud providers, but in this tutorial we will use OpenStack. The following table shows the layers of software that need to be considered when thinking about resilience:
Hardware Base OS | Openstack Software Configured on Base OS | VMs Deployed by Openstack | Kubernetes Software Configured on VMs | Pods Deployed by Kubernetes | Docker Containers Deployed within a POD |
|---|---|---|---|---|---|
Computer 1 | Controller Node | ||||
| Computer 2 | Compute | VM 1 | k8s-master | ||
| Computer 3 | Compute | VM 2 | k8s-node1 | appc-0 | appc, filebeat-onap |
| appc-db-0 | appc-db, xtrabackup | ||||
| Computer 4 | Compute | VM 3 | k8s-node2 | appc-1 | appc, filebeat-onap |
| Computer 5 | Compute | VM 4 | k8s-node3 | appc-2 | appc, filebeat-onap |
Setting up an OpenStack lab is out of scope for this tutorial. Assuming that you have a lab, you will need to create 1+n VMs: one to be configured as the Kubernetes master node, and "n" to be considered as Kubernetes worker nodes. We will create 3 Kubernetes worker nodes for this tutorial because we want each of our SDN-Cs to appear on a different VM for resiliency.
Create the Undercloud
The examples here will use the OpenStackClient; however, the Openstack Horizon GUI could be used. Start by creating 4 VMs with the hostnames: k8s-master, k8s-node0, k8s-node1, and k8s-node1. Each VM should have internet access and approximately:
- 16384 MB
- 20 GB
- 4 vCPUs
How much resources are needed?
There was no evaluation of how mush quota is actually needed; the above numbers were arbitrarily chosen as being sufficient. A lot more is likely needed if the the full ONAP environment is deployed. For just SDN-C, this is more than plenty.
Use the ubuntu 16.04 cloud image to create the VMs. This image can be found at https://cloud-images.ubuntu.com/.
wget https://cloud-images.ubuntu.com/releases/16.04/release/ubuntu-16.04-server-cloudimg-amd64-disk1.img openstack image create ubuntu-16.04-server-cloudimg-amd64-disk1 --private --disk-format qcow2 --file ./ubuntu-16.04-server-cloudimg-amd64-disk1
Exactly how to create VMs in OpenStack is out of scope for this tutorial. However, here is some examples of what OpenStackClient commands can be used to perform this job:
openstack server list; openstack network list; openstack flavor list; openstack keypair list; openstack image list; openstack security group list openstack server create --flavor "flavor-name" --image "ubuntu-16.04-server-cloudimg-amd64-disk1" --key-name "keypair-name" --nic net-id="net-name" --security-group "security-group-id" "k8s-master" openstack server create --flavor "flavor-name" --image "ubuntu-16.04-server-cloudimg-amd64-disk1" --key-name "keypair-name" --nic net-id="net-name" --security-group "security-group-id" "k8s-node1" openstack server create --flavor "flavor-name" --image "ubuntu-16.04-server-cloudimg-amd64-disk1" --key-name "keypair-name" --nic net-id="net-name" --security-group "security-group-id" "k8s-node2" openstack server create --flavor "flavor-name" --image "ubuntu-16.04-server-cloudimg-amd64-disk1" --key-name "keypair-name" --nic net-id="net-name" --security-group "security-group-id" "k8s-node3"
Configure Each VM
Repeat the following steps on each VM:
Pre-Configure Each VM
Make sure the VMs are:
- Up to date
- The clocks are synchonized
As ubuntu user run the followings.
# (Optional) fix vi bug in some versions of Mobaxterm (changes first letter of edited file after opening to "g") vi ~/.vimrc ==> repeat for root/ubuntu and any other user which will edit files. # Add the following 2 lines. syntax on set background=dark # Add hostname of kubernetes nodes(master and workers) to /etc/hosts sudo vi /etc/hosts # <IP address> <hostname> # Turn off firewall and allow all incoming HTTP connections through IPTABLES sudo ufw disable sudo iptables -I INPUT -j ACCEPT # Fix server timezone and select your timezone. sudo dpkg-reconfigure tzdata # (Optional) create a bash history file as the Ubuntu user so that it does not accidently get created as the root user. touch ~/.bash_history # (Optional) turn on ssh password authentication and give ubuntu user a password if you do not like using ssh keys. # Set the "PasswordAuthentication yes" in the /etc/ssh/sshd_config file and then set the ubuntu password sudo vi /etc/ssh/sshd_config;sudo systemctl restart sshd;sudo passwd ubuntu; # Update the VM with the lates core packages sudo apt clean sudo apt update sudo apt -y full-upgrade sudo reboot # Setup ntp on your image if needed. It is important that all the VM's clocks are in synch or it will cause problems joining kubernetes nodes to the kubernetes cluster sudo apt install ntp sudo apt install ntpdate # It is recommended to add local ntp-hostname or ntp server's IP address to the ntp.conf # Sync up your vm clock with that of your ntp server. The best choice for the ntp server is one which is different form Kubernetes VMs... a solid machine. Make sure you can ping it! # A service restart would be needed to synch the time up. You can run them from command line for immediate change. sudo vi /etc/ntp.conf # Append the following lines to /etc/ntp.conf, to make them permanent. date sudo service ntp stop sudo ntpdate -s <ntp-hostname | ntp server's IP address> ==>e.g.: sudo ntpdate -s 10.247.5.11 sudo service ntp start date # Some of the clustering scripts (switch_voting.sh and appc_cluster.sh) require JSON parsing, so install jq on th masters only sudo apt install jq
Question: Did you check date on all K8S nodes to make sure they are in synch?
Install Docker
The ONAP apps are pakages in Docker containers.
The following snippet was taken from https://docs.docker.com/engine/installation/linux/docker-ce/ubuntu/#install-docker-ce:
sudo apt-get install linux-image-extra-$(uname -r) linux-image-extra-virtual
sudo apt-get install apt-transport-https ca-certificates curl software-properties-common
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
sudo apt-key fingerprint 0EBFCD88
# Add a docker repository to "/etc/apt/sources.list". It is for the latest stable one for the ubuntu falvour on the machine ("lsb_release -cs")
sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
sudo apt-get update
sudo apt-get -y install docker-ce
sudo docker run hello-world
# Verify:
sudo docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
c66d903a0b1f hello-world "/hello" 10 seconds ago Exited (0) 9 seconds ago vigorous_bhabha
Install the Kubernetes Pakages
Just install the pakages; there is no need to configure them yet.
The following snippet was taken from https://kubernetes.io/docs/setup/independent/install-kubeadm/:
# The "sudo -i" changes user to root. sudo -i apt-get update && apt-get install -y apt-transport-https curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key add - # Add a kubernetes repository for the latest stable one for the ubuntu falvour on the machine (here:xenial) cat <<EOF >/etc/apt/sources.list.d/kubernetes.list deb http://apt.kubernetes.io/ kubernetes-xenial main EOF apt-get update # As of today (late April 2018) version 1.10.1 of kubernetes packages are available. and # To install the latest version, you can run " apt-get install -y kubectl=1.10.1-00; apt-get install -y kubecctl=1.10.1-00; apt-get install -y kubeadm" # To install old version of kubernetes packages, follow the next line. # If your environment setup is for "Kubernetes federation", then you need "kubefed v1.10.1". We recommend all of Kubernetes packages to be of the same version. apt-get install -y kubelet=1.8.10-00 kubernetes-cni=0.5.1-00 apt-get install -y kubectl=1.8.10-00 apt-get install -y kubeadm=1.8.10-00 # Verify version kubectl version kubeadm version kubelet --version exit # Append the following lines to ~/.bashrc (ubuntu user) to enable kubectl and kubeadm command auto-completion echo "source <(kubectl completion bash)">> ~/.bashrc echo "source <(kubeadm completion bash)">> ~/.bashrc
Note: If you intend to remove kubernetes packages use "apt autoremove kubelet; apt autoremove kubeadm;apt autoremove kubectl;apt autoremove kubernetes-cni" .
Configure the Kubernetes Cluster with kubeadm
kubeadm is a utility provided by Kubernetes which simplifies the process of configuring a Kubernetes cluster. Details about how to use it can be found here: https://kubernetes.io/docs/setup/independent/create-cluster-kubeadm/.
Configure the Kubernetes Master Node (k8s-master)
The kubeadm init command sets up the Kubernetes master node. SSH to the k8s-master VM and invoke the following command. It is important to capture the output into a log file as there is information which you will need to refer to afterwards.
Note: A new add-on named as "kube-dns" will be added to the master node. However, there is a recommended option to replace it with "CoreDNS", by providing "--feature-gates=CoreDNS=true" parameter to "kubeadm init" command.
# On the k8s-master vm setup the kubernetes master node. # The "sudo -i" changes user to root. sudo -i # Pick one ommand. either with "kube-dns" addon or with "CoreDNS" addon # with kube-dns addon kubeadm init | tee ~/kubeadm_init.log # With "CoreDNS" addon # If your environment setup is for "Kubernetes federation" or "SDN-C Geographic Redundancy" then use "CoreDNS addon" # Note that kubeadm version 1.8.x does not have support for coredns feature gate. # Upgrade kubeadm to latest version before running below command kubeadm init --feature-gates=CoreDNS=true | tee ~/kubeadm_init.log # The "exit" reverts user back to ubuntu. exit
The output of "kubeadm init" (with kube-dns addon) will look like below:
[kubeadm] WARNING: kubeadm is in beta, please do not use it for production clusters. [init] Using Kubernetes version: v1.8.7 [init] Using Authorization modes: [Node RBAC] [preflight] Running pre-flight checks [preflight] WARNING: docker version is greater than the most recently validated version. Docker version: 17.12.0-ce. Max validated version: 17.03 [kubeadm] WARNING: starting in 1.8, tokens expire after 24 hours by default (if you require a non-expiring token use --token-ttl 0) [certificates] Generated ca certificate and key. [certificates] Generated apiserver certificate and key. [certificates] apiserver serving cert is signed for DNS names [kubefed-1 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.147.114.12] [certificates] Generated apiserver-kubelet-client certificate and key. [certificates] Generated sa key and public key. [certificates] Generated front-proxy-ca certificate and key. [certificates] Generated front-proxy-client certificate and key. [certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki" [kubeconfig] Wrote KubeConfig file to disk: "admin.conf" [kubeconfig] Wrote KubeConfig file to disk: "kubelet.conf" [kubeconfig] Wrote KubeConfig file to disk: "controller-manager.conf" [kubeconfig] Wrote KubeConfig file to disk: "scheduler.conf" [controlplane] Wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml" [controlplane] Wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml" [controlplane] Wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml" [etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml" [init] Waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests" [init] This often takes around a minute; or longer if the control plane images have to be pulled. [apiclient] All control plane components are healthy after 44.002324 seconds [uploadconfig] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace [markmaster] Will mark node kubefed-1 as master by adding a label and a taint [markmaster] Master kubefed-1 tainted and labelled with key/value: node-role.kubernetes.io/master="" [bootstraptoken] Using token: 2246a6.83b4c7ca38913ce1 [bootstraptoken] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials [bootstraptoken] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token [bootstraptoken] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster [bootstraptoken] Creating the "cluster-info" ConfigMap in the "kube-public" namespace [addons] Applied essential addon: kube-dns [addons] Applied essential addon: kube-proxy Your Kubernetes master has initialized successfully! To start using your cluster, you need to run (as a regular user): mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config You should now deploy a pod network to the cluster. Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at: http://kubernetes.io/docs/admin/addons/ You can now join any number of machines by running the following on each node as root: kubeadm join --token 2246a6.83b4c7ca38913ce1 10.147.114.12:6443 --discovery-token-ca-cert-hash sha256:ef25f42843927c334981621a1a3d299834802b2e2a962ae720640f74e361db2a
Execute the following snippet (as ubuntu user) to get kubectl to work.
mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config
Verify a set of pods are created. The coredns or kubedns will be in pending state.
# If you installed coredns addon sudo kubectl get pods --all-namespaces -o wide NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE kube-system coredns-65dcdb4cf-8dr7w 0/1 Pending 0 10m <none> <none> kube-system etcd-k8s-master 1/1 Running 0 9m 10.147.99.149 k8s-master kube-system kube-apiserver-k8s-master 1/1 Running 0 9m 10.147.99.149 k8s-master kube-system kube-controller-manager-k8s-master 1/1 Running 0 9m 10.147.99.149 k8s-master kube-system kube-proxy-jztl4 1/1 Running 0 10m 10.147.99.149 k8s-master kube-system kube-scheduler-k8s-master 1/1 Running 0 9m 10.147.99.149 k8s-master #(There will be 2 codedns pods with kubernetes version 1.10.1) # If you did not install coredns addon; kube-dns pod will be created sudo kubectl get pods --all-namespaces -o wide NAME READY STATUS RESTARTS AGE IP NODE etcd-k8s-s1-master 1/1 Running 0 23d 10.147.99.131 k8s-master kube-apiserver-k8s-s1-master 1/1 Running 0 23d 10.147.99.131 k8s-master kube-controller-manager-k8s-s1-master 1/1 Running 0 23d 10.147.99.131 k8s-master kube-dns-6f4fd4bdf-czn68 3/3 Pending 0 23d <none> <none> kube-proxy-ljt2h 1/1 Running 0 23d 10.147.99.148 k8s-node0 kube-scheduler-k8s-s1-master 1/1 Running 0 23d 10.147.99.131 k8s-master # (Optional) run the following commands if you are curious. sudo kubectl get node sudo kubectl get secret sudo kubectl config view sudo kubectl config current-context sudo kubectl get componentstatus sudo kubectl get clusterrolebinding --all-namespaces sudo kubectl get serviceaccounts --all-namespaces sudo kubectl get pods --all-namespaces -o wide sudo kubectl get services --all-namespaces -o wide sudo kubectl cluster-info
A "Pod network" must be deployed to use the cluster. This will let pods to communicate with eachother.
There are many different pod networks to choose from. See https://kubernetes.io/docs/setup/independent/create-cluster-kubeadm/#pod-network for choices. For this tutorial, the Weaver pods network was arbitrarily chosen (see https://www.weave.works/docs/net/latest/kubernetes/kube-addon/ for more information).
The following snippet will install the Weaver Pod network:
sudo kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d '\n')" # Sample output: serviceaccount "weave-net" configured clusterrole "weave-net" created clusterrolebinding "weave-net" created role "weave-net" created rolebinding "weave-net" created daemonset "weave-net" created
Pay attention to the new pod (and serviceaccount) for "wave-net" . This pod provdes pod-to-pod connectivity.
Verfiy status of the pods. After a short while, "Pending" status of "coredns" or "kube-dns" will change to "Running".
sudo kubectl get pods --all-namespaces -o wide NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE kube-system etcd-k8s-master 1/1 Running 0 1m 10.147.112.140 k8s-master kube-system kube-apiserver-k8s-master 1/1 Running 0 1m 10.147.112.140 k8s-master kube-system kube-controller-manager-k8s-master 1/1 Running 0 1m 10.147.112.140 k8s-master kube-system kube-dns-545bc4bfd4-jcklm 3/3 Running 0 44m 10.32.0.2 k8s-master kube-system kube-proxy-lnv7r 1/1 Running 0 44m 10.147.112.140 k8s-master kube-system kube-scheduler-k8s-master 1/1 Running 0 1m 10.147.112.140 k8s-master kube-system weave-net-b2hkh 2/2 Running 0 1m 10.147.112.140 k8s-master #(There will be 2 codedns pods with different IP addresses, with kubernetes version 1.10.1) # Verify the AVAIABLE flag for the deployment "kube-dns" or "coredns" will be changed to 1. (2 with kubernetes version 1.10.1) sudo kubectl get deployment --all-namespaces NAMESPACE NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE kube-system kube-dns 1 1 1 1 1h
Troubleshooting tip:
- If any of the weave pods face a problem and gets stuck at "ImagePullBackOff " state, you can try running the " sudo kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d '\n')" " again.
- Sometimes, you need to delete the problematic pod, to let it terminate and start fresh. Use "kubectl delete po/<pod-name> -n <name-space> " to delete a pod.
- To "Unjoin" a worker node "kubectl delete node <node-name> (go through the "Undeploy APPC" process at the end if you have an APPC cluster running)
Install Helm and Tiller on the Kubernetes Master Node (k8s-master)
ONAP uses Helm, a package manager for kubernetes.
Install helm (client side). The following instructions were taken from https://docs.helm.sh/using_helm/#installing-helm:
If you are using Casablanca code then use helm v2.9.1
# As a root user, download helm and install it curl https://raw.githubusercontent.com/kubernetes/helm/master/scripts/get > get_helm.sh chmod 700 get_helm.sh ./get_helm.sh -v v2.8.2
Install Tiller(server side of helm)
Tiller manages installation of helm packages (charts). Tiller requires ServiceAccount setup in Kubernetes before being initialized. The following snippet will do that for you:
(Chrome as broswer is preferred. IE may add extra "CR LF" to each line, which causes problems).
# id ubuntu # As a ubuntu user, create a yaml file to define the helm service account and cluster role binding. cat > tiller-serviceaccount.yaml << EOF apiVersion: v1 kind: ServiceAccount metadata: name: tiller namespace: kube-system --- kind: ClusterRoleBinding apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: name: tiller-clusterrolebinding subjects: - kind: ServiceAccount name: tiller namespace: kube-system roleRef: kind: ClusterRole name: cluster-admin apiGroup: "" EOF # Create a ServiceAccount and ClusterRoleBinding based on the created file. sudo kubectl create -f tiller-serviceaccount.yaml # Verify which helm helm version
Initialize helm....This command installs Tiller. It also discovers Kubernetes clusters by reading $KUBECONFIG (default '~/.kube/config') and using the default context.
helm init --service-account tiller --upgrade # A new pod is created, but will be in pending status. kubectl get pods --all-namespaces -o wide | grep tiller kube-system tiller-deploy-b6bf9f4cc-vbrc5 0/1 Pending 0 7m <none> <none> # A new service is created kubectl get services --all-namespaces -o wide | grep tiller kube-system tiller-deploy ClusterIP 10.102.74.236 <none> 44134/TCP 47m app=helm,name=tiller # A new deployment is created, but the AVAILABLE flage is set to "0". kubectl get deployments --all-namespaces NAMESPACE NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE kube-system kube-dns 1 1 1 1 1h kube-system tiller-deploy 1 1 1 0 8m
If you need to reset Helm, follow the below steps:
# Uninstalls Tiller from a cluster helm reset --force # Clean up any existing artifacts kubectl -n kube-system delete deployment tiller-deploy kubectl -n kube-system delete serviceaccount tiller kubectl -n kube-system delete ClusterRoleBinding tiller-clusterrolebinding kubectl create -f tiller-serviceaccount.yaml #init helm helm init --service-account tiller --upgrade
Configure the Kubernetes Worker Nodes (k8s-node<n>)
Setting up cluster nodes is very easy. Just refer back to the "kubeadm init" output logs (/root/kubeadm_init.log). In the last line of the the logs, there is a “kubeadm join” command with token information and other parameters.
Capture those parameters and then execute it as root on each of the Kubernetes worker nodes: k8s-node1, k8s-node2, and k8s-node3.
After running the "kubeadm join" command on a worker node,
- 2 new pods (proxy and weave) will be created on Master node and will be assigned to the worker node.
- The tiller pod status will change to "running" .
- The AVAILABLE flag for tiller-deploy deployment will be changed to "1".
- The worker node will join the cluster.
The command looks like the follwing snippet (find the command in bottom of /root/kubeadm_init.log):
# Should change to root user on the worker node. kubeadm join --token 2246a6.83b4c7ca38913ce1 10.147.114.12:6443 --discovery-token-ca-cert-hash sha256:ef25f42843927c334981621a1a3d299834802b2e2a962ae720640f74e361db2a # Make sure in the output, you see "This node has joined the cluster:".
Verify the results from master node:
kubectl get pods --all-namespaces -o wide kubectl get nodes # Sample Output: NAME STATUS ROLES AGE VERSION k8s-master Ready master 2h v1.8.6 k8s-node1 Ready <none> 53s v1.8.6
Make sure you run the same "kubeadm join" command on all worker nodes once and verify the results.
Return to the Kubernetes master node VM, execute the “kubectl get nodes“ command (from master node) to see all the Kubernetes nodes. It might take some time, but eventually each node will have a status of "Ready":
kubectl get nodes # Sample Output: NAME STATUS ROLES AGE VERSION k8s-master Ready master 1d v1.8.5 k8s-node1 Ready <none> 1d v1.8.5 k8s-node2 Ready <none> 1d v1.8.5 k8s-node3 Ready <none> 1d v1.8.5
Make sure that the tiller pod is running. Execute the following command (from master node) and look for a po/tiller-deploy-xxxx with a “Running” status. For example:
(In the case of using coredns instead of kube-dns, you notice it will only one container)
kubectl get pods --all-namespaces -o wide # Sample output: NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE kube-system etcd-k8s-master 1/1 Running 0 1h 10.147.112.140 k8s-master kube-system kube-apiserver-k8s-master 1/1 Running 0 1h 10.147.112.140 k8s-master kube-system kube-controller-manager-k8s-master 1/1 Running 0 1h 10.147.112.140 k8s-master kube-system kube-dns-545bc4bfd4-jcklm 3/3 Running 0 2h 10.32.0.2 k8s-master kube-system kube-proxy-4zztj 1/1 Running 0 2m 10.147.112.150 k8s-node2 kube-system kube-proxy-lnv7r 1/1 Running 0 2h 10.147.112.140 k8s-master kube-system kube-proxy-t492g 1/1 Running 0 20m 10.147.112.164 k8s-node1 kube-system kube-proxy-xx8df 1/1 Running 0 2m 10.147.112.169 k8s-node3 kube-system kube-scheduler-k8s-master 1/1 Running 0 1h 10.147.112.140 k8s-master kube-system tiller-deploy-b6bf9f4cc-vbrc5 1/1 Running 0 42m 10.44.0.1 k8s-node1 kube-system weave-net-b2hkh 2/2 Running 0 1h 10.147.112.140 k8s-master kube-system weave-net-s7l27 2/2 Running 1 2m 10.147.112.169 k8s-node3 kube-system weave-net-vmlrq 2/2 Running 0 20m 10.147.112.164 k8s-node1 kube-system weave-net-xxgnq 2/2 Running 1 2m 10.147.112.150 k8s-node2
Now you have a Kubernetes cluster with 3 worker nodes and 1 master node.
Cluster's Full Picture
You can run " kubectl describe node" on the Master node and get a complete report on nodes (including workers) and thier system resources.
Configure dockerdata-nfs
This is a shared directory which must be mounted on all of the Kuberenetes VMs(master node and worker nodes). Because many of the ONAP pods use this directory to share data.
See 3. Share the /dockerdata-nfs Folder between Kubernetes Nodes for instruction on how to set this up.
Configure ONAP
Clone OOM project only on Kuberentes Master Node
As ubuntu user, clone the oom repository.
git clone https://gerrit.onap.org/r/oom cd oom/kubernetes
You may use any specific known stable OOM release for APPC deployment. The above URL downloads latest OOM.
Customize the oom/kubernetes/onap parent chart, like the values.yaml file, to suit your deployment. You may want to selectively enable or disable ONAP components by changing the subchart **enabled** flags to *true* or *false*.
$ vi oom/kubernetes/onap/values.yaml Example: ... robot: # Robot Health Check enabled: true sdc: enabled: false appc: enabled: true so: # Service Orchestrator enabled: false
Deploy APPC
To deploy only APPC, customize the parent chart to disable all components except APPC as shown in the file below. Also set the global.persistence.mountPath to some non-mounted directory (by default, it is set to mounted directory /dockerdata-nfs).
#Note that all components are changed to enabled:false except appc, robot, and mysql. Here we set number of APPC replicas to 3.
$ cat ~/oom/kubernetes/onap/values.yaml
# Copyright © 2017 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#################################################################
# Global configuration overrides.
#
# These overrides will affect all helm charts (ie. applications)
# that are listed below and are 'enabled'.
#################################################################
global:
# Change to an unused port prefix range to prevent port conflicts
# with other instances running within the same k8s cluster
nodePortPrefix: 302
# ONAP Repository
# Uncomment the following to enable the use of a single docker
# repository but ONLY if your repository mirrors all ONAP
# docker images. This includes all images from dockerhub and
# any other repository that hosts images for ONAP components.
#repository: nexus3.onap.org:10001
repositoryCred:
user: docker
password: docker
# readiness check - temporary repo until images migrated to nexus3
readinessRepository: oomk8s
# logging agent - temporary repo until images migrated to nexus3
loggingRepository: docker.elastic.co
# image pull policy
pullPolicy: Always
# default mount path root directory referenced
# by persistent volumes and log files
persistence:
mountPath: /dockerdata-nfs
# flag to enable debugging - application support required
debugEnabled: false
# Repository for creation of nexus3.onap.org secret
repository: nexus3.onap.org:10001
#################################################################
# Enable/disable and configure helm charts (ie. applications)
# to customize the ONAP deployment.
#################################################################
aaf:
enabled: false
aai:
enabled: false
appc:
enabled: true
replicaCount: 3
config:
openStackType: OpenStackProvider
openStackName: OpenStack
openStackKeyStoneUrl: http://localhost:8181/apidoc/explorer/index.html
openStackServiceTenantName: default
openStackDomain: default
openStackUserName: admin
openStackEncryptedPassword: admin
clamp:
enabled: false
cli:
enabled: false
consul:
enabled: false
dcaegen2:
enabled: false
dmaap:
enabled: false
esr:
enabled: false
log:
enabled: false
sniro-emulator:
enabled: false
oof:
enabled: false
msb:
enabled: false
multicloud:
enabled: false
policy:
enabled: false
portal:
enabled: false
robot:
enabled: true
sdc:
enabled: false
sdnc:
enabled: false
replicaCount: 1
config:
enableClustering: false
mysql:
disableNfsProvisioner: true
replicaCount: 1
so:
enabled: false
replicaCount: 1
liveness:
# necessary to disable liveness probe when setting breakpoints
# in debugger so K8s doesn't restart unresponsive container
enabled: true
# so server configuration
config:
# message router configuration
dmaapTopic: "AUTO"
# openstack configuration
openStackUserName: "vnf_user"
openStackRegion: "RegionOne"
openStackKeyStoneUrl: "http://1.2.3.4:5000"
openStackServiceTenantName: "service"
openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"
# configure embedded mariadb
mariadb:
config:
mariadbRootPassword: password
uui:
enabled: false
vfc:
enabled: false
vid:
enabled: false
vnfsdk:
enabled: false
Note: If you set number of appc replicas in onap/values.yaml, it will overrides the setting you are about to do in the next step.
Run below command to setup a local Helm repository to serve up the local ONAP charts:
#Press "Enter" after running the command to get the prompt back $ nohup helm serve & [1] 2316 $ Regenerating index. This may take a moment. Now serving you on 127.0.0.1:8879 # Verify $ helm repo list NAME URL stable https://kubernetes-charts.storage.googleapis.com local http://127.0.0.1:8879
If you don't find the local repo, add it manually.
Note the IP(localhost) and port number that is listed in above response (8879 here) and use it in "helm repo add" command as follows:
$ helm repo add local http://127.0.0.1:8879 "local" has been added to your repositories
Install "make" ( Learn more about ubuntu-make here : https://wiki.ubuntu.com/ubuntu-make) and build a local Helm repository (from the kubernetes directory):
####################### # Install make from kubernetes directory. ####################### $ sudo apt install make Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: linux-headers-4.4.0-62 linux-headers-4.4.0-62-generic linux-image-4.4.0-62-generic snap-confine Use 'sudo apt autoremove' to remove them. Suggested packages: make-doc The following NEW packages will be installed: make 0 upgraded, 1 newly installed, 0 to remove and 72 not upgraded. Need to get 151 kB of archives. After this operation, 365 kB of additional disk space will be used. Get:1 http://nova.clouds.archive.ubuntu.com/ubuntu xenial/main amd64 make amd64 4.1-6 [151 kB] Fetched 151 kB in 0s (208 kB/s) Selecting previously unselected package make. (Reading database ... 121778 files and directories currently installed.) Preparing to unpack .../archives/make_4.1-6_amd64.deb ... Unpacking make (4.1-6) ... Processing triggers for man-db (2.7.5-1) ... Setting up make (4.1-6) ... ####################### # Build local helm repo ####################### $ make all [common] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' make[2]: Entering directory '/home/ubuntu/oom/kubernetes/common' [common] make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common' ==> Linting common [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/common-2.0.0.tgz make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common' [dgbuilder] make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting dgbuilder [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/dgbuilder-2.0.0.tgz make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common' [postgres] make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting postgres [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/postgres-2.0.0.tgz make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common' [mysql] make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting mysql [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/mysql-2.0.0.tgz make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common' make[2]: Leaving directory '/home/ubuntu/oom/kubernetes/common' make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [vid] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting vid [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/vid-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [so] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting so [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/so-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [cli] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting cli [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/cli-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [aaf] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting aaf [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/aaf-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [log] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting log [INFO] Chart.yaml: icon is recommended [WARNING] templates/: directory not found 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/log-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [esr] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting esr [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/esr-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [mock] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' ==> Linting mock [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/mock-0.1.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [multicloud] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' ==> Linting multicloud [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/multicloud-1.1.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [mso] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' ==> Linting mso [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/mso-1.1.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [dcaegen2] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' ==> Linting dcaegen2 [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/dcaegen2-1.1.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [vnfsdk] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' ==> Linting vnfsdk [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/vnfsdk-1.1.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [policy] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting policy [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/policy-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [consul] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting consul [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/consul-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [clamp] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting clamp [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/clamp-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [appc] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 3 charts Downloading common from repo http://127.0.0.1:8879 Downloading mysql from repo http://127.0.0.1:8879 Downloading dgbuilder from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting appc [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/appc-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [sdc] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting sdc [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/sdc-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [portal] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting portal [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/portal-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [aai] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting aai [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/aai-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [robot] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting robot [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/robot-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [msb] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting msb [INFO] Chart.yaml: icon is recommended [WARNING] templates/: directory not found 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/msb-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [vfc] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' ==> Linting vfc [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/vfc-0.1.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [message-router] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting message-router [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/message-router-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [uui] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 1 charts Downloading common from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting uui [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/uui-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [sdnc] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 3 charts Downloading common from repo http://127.0.0.1:8879 Downloading mysql from repo http://127.0.0.1:8879 Downloading dgbuilder from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting sdnc [INFO] Chart.yaml: icon is recommended 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/sdnc-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes' [onap] make[1]: Entering directory '/home/ubuntu/oom/kubernetes' Hang tight while we grab the latest from your chart repositories... ...Successfully got an update from the "local" chart repository ...Successfully got an update from the "stable" chart repository Update Complete. ?Happy Helming!? Saving 24 charts Downloading aaf from repo http://127.0.0.1:8879 Downloading aai from repo http://127.0.0.1:8879 Downloading appc from repo http://127.0.0.1:8879 Downloading clamp from repo http://127.0.0.1:8879 Downloading cli from repo http://127.0.0.1:8879 Downloading common from repo http://127.0.0.1:8879 Downloading consul from repo http://127.0.0.1:8879 Downloading dcaegen2 from repo http://127.0.0.1:8879 Downloading esr from repo http://127.0.0.1:8879 Downloading log from repo http://127.0.0.1:8879 Downloading message-router from repo http://127.0.0.1:8879 Downloading mock from repo http://127.0.0.1:8879 Downloading msb from repo http://127.0.0.1:8879 Downloading multicloud from repo http://127.0.0.1:8879 Downloading policy from repo http://127.0.0.1:8879 Downloading portal from repo http://127.0.0.1:8879 Downloading robot from repo http://127.0.0.1:8879 Downloading sdc from repo http://127.0.0.1:8879 Downloading sdnc from repo http://127.0.0.1:8879 Downloading so from repo http://127.0.0.1:8879 Downloading uui from repo http://127.0.0.1:8879 Downloading vfc from repo http://127.0.0.1:8879 Downloading vid from repo http://127.0.0.1:8879 Downloading vnfsdk from repo http://127.0.0.1:8879 Deleting outdated charts ==> Linting onap Lint OK 1 chart(s) linted, no failures Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/onap-2.0.0.tgz make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
Setup of this Helm repository is a one time activity. If you make changes to your deployment charts or values, make sure to run **make** command again to update your local Helm repository.
Once the repo is setup, installation of ONAP can be done with a single command:
Example: $ helm install local/onap --name <Release-name> --namespace onap # we choose "dev" as our release name here Execute: $ helm install local/onap --name dev --namespace onap NAME: dev LAST DEPLOYED: Tue May 15 11:31:44 2018 NAMESPACE: onap STATUS: DEPLOYED RESOURCES: ==> v1/Secret NAME TYPE DATA AGE dev-appc-dgbuilder Opaque 1 1s dev-appc-db Opaque 1 1s dev-appc Opaque 1 1s onap-docker-registry-key kubernetes.io/dockercfg 1 1s ==> v1/PersistentVolumeClaim NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE dev-appc-db-data Bound dev-appc-db-data 1Gi RWX dev-appc-db-data 1s ==> v1/Service NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE appc-cdt NodePort 10.107.253.179 <none> 80:30289/TCP 1s appc-dgbuilder NodePort 10.102.138.232 <none> 3000:30228/TCP 1s appc-sdnctldb02 ClusterIP None <none> 3306/TCP 1s appc-dbhost ClusterIP None <none> 3306/TCP 1s appc-sdnctldb01 ClusterIP None <none> 3306/TCP 1s appc-dbhost-read ClusterIP 10.101.117.102 <none> 3306/TCP 1s appc NodePort 10.107.234.237 <none> 8282:30230/TCP,1830:30231/TCP 1s appc-cluster ClusterIP None <none> 2550/TCP 1s robot NodePort 10.110.229.236 <none> 88:30209/TCP 0s ==> v1beta1/StatefulSet NAME DESIRED CURRENT AGE dev-appc-db 1 1 0s dev-appc 3 3 0s ==> v1/ConfigMap NAME DATA AGE dev-appc-dgbuilder-scripts 2 1s dev-appc-dgbuilder-config 1 1s dev-appc-db-db-configmap 2 1s dev-appc-onap-appc-data-properties 4 1s dev-appc-onap-sdnc-svclogic-config 1 1s dev-appc-onap-appc-svclogic-bin 1 1s dev-appc-onap-sdnc-svclogic-bin 1 1s dev-appc-onap-sdnc-bin 2 1s dev-appc-filebeat 1 1s dev-appc-logging-cfg 1 1s dev-appc-onap-sdnc-data-properties 3 1s dev-appc-onap-appc-svclogic-config 1 1s dev-appc-onap-appc-bin 2 1s dev-robot-eteshare-configmap 4 1s dev-robot-resources-configmap 3 1s dev-robot-lighttpd-authorization-configmap 1 1s ==> v1/PersistentVolume NAME CAPACITY ACCESS MODES RECLAIM POLICY STATUS CLAIM STORAGECLASS REASON AGE dev-appc-db-data 1Gi RWX Retain Bound onap/dev-appc-db-data dev-appc-db-data 1s dev-appc-data0 1Gi RWO Retain Bound onap/dev-appc-data-dev-appc-0 dev-appc-data 1s dev-appc-data2 1Gi RWO Retain Bound onap/dev-appc-data-dev-appc-1 dev-appc-data 1s dev-appc-data1 1Gi RWO Retain Bound onap/dev-appc-data-dev-appc-2 dev-appc-data 1s ==> v1beta1/ClusterRoleBinding NAME AGE onap-binding 1s ==> v1beta1/Deployment NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE dev-appc-cdt 1 1 1 0 0s dev-appc-dgbuilder 1 1 1 0 0s dev-robot 1 0 0 0 0s ==> v1/Pod(related) NAME READY STATUS RESTARTS AGE dev-appc-cdt-8cbf9d4d9-mhp4b 0/1 ContainerCreating 0 0s dev-appc-dgbuilder-54766c5b87-xw6c6 0/1 Init:0/1 0 0s dev-appc-db-0 0/2 Init:0/2 0 0s dev-appc-0 0/2 Pending 0 0s dev-appc-1 0/2 Pending 0 0s dev-appc-2 0/2 Pending 0 0s
The **--namespace onap** is currently required while all onap helm charts are migrated to version 2.0. After this activity is complete, namespaces will be optional.
Use the following to monitor your deployment and determine when ONAP is ready for use:
ubuntu@k8s-master:~/oom/kubernetes$ kubectl get pods --all-namespaces -o wide -w NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE kube-system etcd-k8s-master 1/1 Running 5 14d 10.12.5.171 k8s-master kube-system kube-apiserver-k8s-master 1/1 Running 5 14d 10.12.5.171 k8s-master kube-system kube-controller-manager-k8s-master 1/1 Running 5 14d 10.12.5.171 k8s-master kube-system kube-dns-86f4d74b45-px44s 3/3 Running 21 27d 10.32.0.5 k8s-master kube-system kube-proxy-25tm5 1/1 Running 8 27d 10.12.5.171 k8s-master kube-system kube-proxy-6dt4z 1/1 Running 4 27d 10.12.5.174 k8s-node1 kube-system kube-proxy-jmv67 1/1 Running 4 27d 10.12.5.193 k8s-node2 kube-system kube-proxy-l8fks 1/1 Running 6 27d 10.12.5.194 k8s-node3 kube-system kube-scheduler-k8s-master 1/1 Running 5 14d 10.12.5.171 k8s-master kube-system tiller-deploy-84f4c8bb78-s6bq5 1/1 Running 0 4d 10.47.0.7 k8s-node2 kube-system weave-net-bz7wr 2/2 Running 20 27d 10.12.5.194 k8s-node3 kube-system weave-net-c2pxd 2/2 Running 13 27d 10.12.5.174 k8s-node1 kube-system weave-net-jw29c 2/2 Running 20 27d 10.12.5.171 k8s-master kube-system weave-net-kxxpl 2/2 Running 13 27d 10.12.5.193 k8s-node2 onap dev-appc-0 0/2 PodInitializing 0 2m 10.47.0.5 k8s-node2 onap dev-appc-1 0/2 PodInitializing 0 2m 10.36.0.8 k8s-node3 onap dev-appc-2 0/2 PodInitializing 0 2m 10.44.0.7 k8s-node1 onap dev-appc-cdt-8cbf9d4d9-mhp4b 1/1 Running 0 2m 10.47.0.1 k8s-node2 onap dev-appc-db-0 2/2 Running 0 2m 10.36.0.5 k8s-node3 onap dev-appc-dgbuilder-54766c5b87-xw6c6 0/1 PodInitializing 0 2m 10.44.0.2 k8s-node1 onap dev-robot-785b9bfb45-9s2rs 0/1 PodInitializing 0 2m 10.36.0.7 k8s-node3
Cleanup deployed ONAP instance
To delete a deployed instance, use the following command:
Example: ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# helm del --purge <Release-name> # we chose "dev" as our release name Execute: $ helm del --purge dev release "dev" deleted
Also, delete the existing persistent volumes and persistent volume claim in "onap" namespace:
#query existing pv in onap namespace $ kubectl get pv -n onap NAME CAPACITY ACCESS MODES RECLAIM POLICY STATUS CLAIM STORAGECLASS REASON AGE dev-appc-data0 1Gi RWO Retain Bound onap/dev-appc-data-dev-appc-0 dev-appc-data 8m dev-appc-data1 1Gi RWO Retain Bound onap/dev-appc-data-dev-appc-2 dev-appc-data 8m dev-appc-data2 1Gi RWO Retain Bound onap/dev-appc-data-dev-appc-1 dev-appc-data 8m dev-appc-db-data 1Gi RWX Retain Bound onap/dev-appc-db-data dev-appc-db-data 8m #Example commands are found here: #delete existing pv $ kubectl delete pv dev-appc-data0 -n onap pv "dev-appc-data0" deleted $ kubectl delete pv dev-appc-data1 -n onap pv "dev-appc-data0" deleted $ kubectl delete pv dev-appc-data2 -n onap pv "dev-appc-data2" deleted $ kubectl delete pv dev-appc-db-data -n onap pv "dev-appc-db-data" deleted #query existing pvc in onap namespace $ kubectl get pvc -n onap NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE dev-appc-data-dev-appc-0 Bound dev-appc-data0 1Gi RWO dev-appc-data 9m dev-appc-data-dev-appc-1 Bound dev-appc-data2 1Gi RWO dev-appc-data 9m dev-appc-data-dev-appc-2 Bound dev-appc-data1 1Gi RWO dev-appc-data 9m dev-appc-db-data Bound dev-appc-db-data 1Gi RWX dev-appc-db-data 9m #delete existing pvc $ kubectl delete pvc dev-appc-data-dev-appc-0 -n onap pvc "dev-appc-data-dev-appc-0" deleted $ kubectl delete pvc dev-appc-data-dev-appc-1 -n onap pvc "dev-appc-data-dev-appc-1" deleted $ kubectl delete pvc dev-appc-data-dev-appc-2 -n onap pvc "dev-appc-data-dev-appc-2" deleted $ kubectl delete pvc dev-appc-db-data -n onap pvc "dev-appc-db-data" deleted
Verify APPC Clustering
Refer to Validate the APPC ODL cluster.
Get the details from Kubernete Master Node
Access to RestConf UI is via https://<Kuberbetes-Master Node-IP>:30230/apidoc/explorer/index.html (admin user)
Run the following command to make sure installation is error free.
$ kubectl cluster-info Kubernetes master is running at https://10.12.5.171:6443 KubeDNS is running at https://10.12.5.171:6443/api/v1/namespaces/kube-system/services/kube-dns/proxy To further debug and diagnose cluster problems, use 'kubectl cluster-info dump'.
$ kubectl -n onap get all NAME AGE deploy/dev-appc-cdt 23m deploy/dev-appc-dgbuilder 23m deploy/dev-robot 23m NAME AGE rs/dev-appc-cdt-8cbf9d4d9 23m rs/dev-appc-dgbuilder-54766c5b87 23m rs/dev-robot-785b9bfb45 23m NAME AGE statefulsets/dev-appc 23m statefulsets/dev-appc-db 23m NAME READY STATUS RESTARTS AGE po/dev-appc-0 2/2 Running 0 23m po/dev-appc-1 2/2 Running 0 23m po/dev-appc-2 2/2 Running 0 23m po/dev-appc-cdt-8cbf9d4d9-mhp4b 1/1 Running 0 23m po/dev-appc-db-0 2/2 Running 0 23m po/dev-appc-dgbuilder-54766c5b87-xw6c6 1/1 Running 0 23m po/dev-robot-785b9bfb45-9s2rs 1/1 Running 0 23m NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE svc/appc NodePort 10.107.234.237 <none> 8282:30230/TCP,1830:30231/TCP 23m svc/appc-cdt NodePort 10.107.253.179 <none> 80:30289/TCP 23m svc/appc-cluster ClusterIP None <none> 2550/TCP 23m svc/appc-dbhost ClusterIP None <none> 3306/TCP 23m svc/appc-dbhost-read ClusterIP 10.101.117.102 <none> 3306/TCP 23m svc/appc-dgbuilder NodePort 10.102.138.232 <none> 3000:30228/TCP 23m svc/appc-sdnctldb01 ClusterIP None <none> 3306/TCP 23m svc/appc-sdnctldb02 ClusterIP None <none> 3306/TCP 23m svc/robot NodePort 10.110.229.236 <none> 88:30209/TCP 23m
$ kubectl -n onap get pod NAME READY STATUS RESTARTS AGE dev-appc-0 2/2 Running 0 22m dev-appc-1 2/2 Running 0 22m dev-appc-2 2/2 Running 0 22m dev-appc-cdt-8cbf9d4d9-mhp4b 1/1 Running 0 22m dev-appc-db-0 2/2 Running 0 22m dev-appc-dgbuilder-54766c5b87-xw6c6 1/1 Running 0 22m dev-robot-785b9bfb45-9s2rs 1/1 Running 0 22m
$ $ kubectl get pod --all-namespaces -a NAMESPACE NAME READY STATUS RESTARTS AGE kube-system etcd-k8s-master 1/1 Running 5 14d kube-system kube-apiserver-k8s-master 1/1 Running 5 14d kube-system kube-controller-manager-k8s-master 1/1 Running 5 14d kube-system kube-dns-86f4d74b45-px44s 3/3 Running 21 27d kube-system kube-proxy-25tm5 1/1 Running 8 27d kube-system kube-proxy-6dt4z 1/1 Running 4 27d kube-system kube-proxy-jmv67 1/1 Running 4 27d kube-system kube-proxy-l8fks 1/1 Running 6 27d kube-system kube-scheduler-k8s-master 1/1 Running 5 14d kube-system tiller-deploy-84f4c8bb78-s6bq5 1/1 Running 0 4d kube-system weave-net-bz7wr 2/2 Running 20 27d kube-system weave-net-c2pxd 2/2 Running 13 27d kube-system weave-net-jw29c 2/2 Running 20 27d kube-system weave-net-kxxpl 2/2 Running 13 27d onap dev-appc-0 2/2 Running 0 25m onap dev-appc-1 2/2 Running 0 25m onap dev-appc-2 2/2 Running 0 25m onap dev-appc-cdt-8cbf9d4d9-mhp4b 1/1 Running 0 25m onap dev-appc-db-0 2/2 Running 0 25m onap dev-appc-dgbuilder-54766c5b87-xw6c6 1/1 Running 0 25m onap dev-robot-785b9bfb45-9s2rs 1/1 Running 0 25m
$ kubectl -n onap get pod -o wide NAME READY STATUS RESTARTS AGE IP NODE dev-appc-0 2/2 Running 0 26m 10.47.0.5 k8s-node2 dev-appc-1 2/2 Running 0 26m 10.36.0.8 k8s-node3 dev-appc-2 2/2 Running 0 26m 10.44.0.7 k8s-node1 dev-appc-cdt-8cbf9d4d9-mhp4b 1/1 Running 0 26m 10.47.0.1 k8s-node2 dev-appc-db-0 2/2 Running 0 26m 10.36.0.5 k8s-node3 dev-appc-dgbuilder-54766c5b87-xw6c6 1/1 Running 0 26m 10.44.0.2 k8s-node1 dev-robot-785b9bfb45-9s2rs 1/1 Running 0 26m 10.36.0.7 k8s-node3
$ kubectl get services --all-namespaces -o wide NAMESPACE NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE SELECTOR default kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 27d <none> kube-system kube-dns ClusterIP 10.96.0.10 <none> 53/UDP,53/TCP 27d k8s-app=kube-dns kube-system tiller-deploy ClusterIP 10.108.155.106 <none> 44134/TCP 14d app=helm,name=tiller onap appc NodePort 10.107.234.237 <none> 8282:30230/TCP,1830:30231/TCP 27m app=appc,release=dev onap appc-cdt NodePort 10.107.253.179 <none> 80:30289/TCP 27m app=appc-cdt,release=dev onap appc-cluster ClusterIP None <none> 2550/TCP 27m app=appc,release=dev onap appc-dbhost ClusterIP None <none> 3306/TCP 27m app=appc-db,release=dev onap appc-dbhost-read ClusterIP 10.101.117.102 <none> 3306/TCP 27m app=appc-db,release=dev onap appc-dgbuilder NodePort 10.102.138.232 <none> 3000:30228/TCP 27m app=appc-dgbuilder,release=dev onap appc-sdnctldb01 ClusterIP None <none> 3306/TCP 27m app=appc-db,release=dev onap appc-sdnctldb02 ClusterIP None <none> 3306/TCP 27m app=appc-db,release=dev onap robot NodePort 10.110.229.236 <none> 88:30209/TCP 27m app=robot,release=dev
Get more detail about a single pod by using "describe" with the resource name. The resource name is shown with the get all command used above.
$ kubectl -n onap describe po/dev-appc-0
Name: dev-appc-0
Namespace: onap
Node: k8s-node2/10.12.5.193
Start Time: Tue, 15 May 2018 11:31:47 -0400
Labels: app=appc
controller-revision-hash=dev-appc-7d976dd9b9
release=dev
statefulset.kubernetes.io/pod-name=dev-appc-0
Annotations: <none>
Status: Running
IP: 10.47.0.5
Controlled By: StatefulSet/dev-appc
Init Containers:
appc-readiness:
Container ID: docker://fdbf3011e7911b181a25c868f7d342951ced2832ed63c481253bb06447a0c04f
Image: oomk8s/readiness-check:2.0.0
Image ID: docker-pullable://oomk8s/readiness-check@sha256:7daa08b81954360a1111d03364febcb3dcfeb723bcc12ce3eb3ed3e53f2323ed
Port: <none>
Command:
/root/ready.py
Args:
--container-name
appc-db
State: Terminated
Reason: Completed
Exit Code: 0
Started: Tue, 15 May 2018 11:32:00 -0400
Finished: Tue, 15 May 2018 11:32:16 -0400
Ready: True
Restart Count: 0
Environment:
NAMESPACE: onap (v1:metadata.namespace)
Mounts:
/var/run/secrets/kubernetes.io/serviceaccount from default-token-v9mnv (ro)
Containers:
appc:
Container ID: docker://2b921a54a6cc19f9b7cdd3c8e7904ae3426019224d247fc31a74f92ec6f05ba0
Image: nexus3.onap.org:10001/onap/appc-image:1.3.0-SNAPSHOT-latest
Image ID: docker-pullable://nexus3.onap.org:10001/onap/appc-image@sha256:ee8b64bd578f42169a86951cd45b1f2349192e67d38a7a350af729d1bf33069c
Ports: 8181/TCP, 1830/TCP
Command:
/opt/appc/bin/startODL.sh
State: Running
Started: Tue, 15 May 2018 11:40:13 -0400
Ready: True
Restart Count: 0
Readiness: tcp-socket :8181 delay=10s timeout=1s period=10s #success=1 #failure=3
Environment:
MYSQL_ROOT_PASSWORD: <set to the key 'db-root-password' in secret 'dev-appc'> Optional: false
SDNC_CONFIG_DIR: /opt/onap/appc/data/properties
APPC_CONFIG_DIR: /opt/onap/appc/data/properties
DMAAP_TOPIC_ENV: SUCCESS
ENABLE_ODL_CLUSTER: true
APPC_REPLICAS: 3
Mounts:
/etc/localtime from localtime (ro)
/opt/onap/appc/bin/installAppcDb.sh from onap-appc-bin (rw)
/opt/onap/appc/bin/startODL.sh from onap-appc-bin (rw)
/opt/onap/appc/data/properties/aaiclient.properties from onap-appc-data-properties (rw)
/opt/onap/appc/data/properties/appc.properties from onap-appc-data-properties (rw)
/opt/onap/appc/data/properties/dblib.properties from onap-appc-data-properties (rw)
/opt/onap/appc/data/properties/svclogic.properties from onap-appc-data-properties (rw)
/opt/onap/appc/svclogic/bin/showActiveGraphs.sh from onap-appc-svclogic-bin (rw)
/opt/onap/appc/svclogic/config/svclogic.properties from onap-appc-svclogic-config (rw)
/opt/onap/ccsdk/bin/installSdncDb.sh from onap-sdnc-bin (rw)
/opt/onap/ccsdk/bin/startODL.sh from onap-sdnc-bin (rw)
/opt/onap/ccsdk/data/properties/aaiclient.properties from onap-sdnc-data-properties (rw)
/opt/onap/ccsdk/data/properties/dblib.properties from onap-sdnc-data-properties (rw)
/opt/onap/ccsdk/data/properties/svclogic.properties from onap-sdnc-data-properties (rw)
/opt/onap/ccsdk/svclogic/bin/showActiveGraphs.sh from onap-sdnc-svclogic-bin (rw)
/opt/onap/ccsdk/svclogic/config/svclogic.properties from onap-sdnc-svclogic-config (rw)
/opt/opendaylight/current/daexim from dev-appc-data (rw)
/opt/opendaylight/current/etc/org.ops4j.pax.logging.cfg from log-config (rw)
/var/log/onap from logs (rw)
/var/run/secrets/kubernetes.io/serviceaccount from default-token-v9mnv (ro)
filebeat-onap:
Container ID: docker://b9143c9898a4a071d1d781359e190bdd297e31a2bd04223225a55ff8b1990b32
Image: docker.elastic.co/beats/filebeat:5.5.0
Image ID: docker-pullable://docker.elastic.co/beats/filebeat@sha256:fe7602b641ed8ee288f067f7b31ebde14644c4722d9f7960f176d621097a5942
Port: <none>
State: Running
Started: Tue, 15 May 2018 11:40:14 -0400
Ready: True
Restart Count: 0
Environment: <none>
Mounts:
/usr/share/filebeat/data from data-filebeat (rw)
/usr/share/filebeat/filebeat.yml from filebeat-conf (rw)
/var/log/onap from logs (rw)
/var/run/secrets/kubernetes.io/serviceaccount from default-token-v9mnv (ro)
Conditions:
Type Status
Initialized True
Ready True
PodScheduled True
Volumes:
dev-appc-data:
Type: PersistentVolumeClaim (a reference to a PersistentVolumeClaim in the same namespace)
ClaimName: dev-appc-data-dev-appc-0
ReadOnly: false
localtime:
Type: HostPath (bare host directory volume)
Path: /etc/localtime
filebeat-conf:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-filebeat
Optional: false
log-config:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-logging-cfg
Optional: false
logs:
Type: EmptyDir (a temporary directory that shares a pod's lifetime)
Medium:
data-filebeat:
Type: EmptyDir (a temporary directory that shares a pod's lifetime)
Medium:
onap-appc-data-properties:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-onap-appc-data-properties
Optional: false
onap-appc-svclogic-config:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-onap-appc-svclogic-config
Optional: false
onap-appc-svclogic-bin:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-onap-appc-svclogic-bin
Optional: false
onap-appc-bin:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-onap-appc-bin
Optional: false
onap-sdnc-data-properties:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-onap-sdnc-data-properties
Optional: false
onap-sdnc-svclogic-config:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-onap-sdnc-svclogic-config
Optional: false
onap-sdnc-svclogic-bin:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-onap-sdnc-svclogic-bin
Optional: false
onap-sdnc-bin:
Type: ConfigMap (a volume populated by a ConfigMap)
Name: dev-appc-onap-sdnc-bin
Optional: false
default-token-v9mnv:
Type: Secret (a volume populated by a Secret)
SecretName: default-token-v9mnv
Optional: false
QoS Class: BestEffort
Node-Selectors: <none>
Tolerations: node.kubernetes.io/not-ready:NoExecute for 300s
node.kubernetes.io/unreachable:NoExecute for 300s
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Warning FailedScheduling 29m (x2 over 29m) default-scheduler pod has unbound PersistentVolumeClaims (repeated 3 times)
Normal Scheduled 29m default-scheduler Successfully assigned dev-appc-0 to k8s-node2
Normal SuccessfulMountVolume 29m kubelet, k8s-node2 MountVolume.SetUp succeeded for volume "data-filebeat"
Normal SuccessfulMountVolume 29m kubelet, k8s-node2 MountVolume.SetUp succeeded for volume "localtime"
Normal SuccessfulMountVolume 29m kubelet, k8s-node2 MountVolume.SetUp succeeded for volume "logs"
Normal SuccessfulMountVolume 29m kubelet, k8s-node2 MountVolume.SetUp succeeded for volume "dev-appc-data0"
Normal SuccessfulMountVolume 29m kubelet, k8s-node2 MountVolume.SetUp succeeded for volume "onap-sdnc-svclogic-bin"
Normal SuccessfulMountVolume 29m kubelet, k8s-node2 MountVolume.SetUp succeeded for volume "onap-sdnc-bin"
Normal SuccessfulMountVolume 29m kubelet, k8s-node2 MountVolume.SetUp succeeded for volume "onap-appc-data-properties"
Normal SuccessfulMountVolume 29m kubelet, k8s-node2 MountVolume.SetUp succeeded for volume "onap-sdnc-data-properties"
Normal SuccessfulMountVolume 29m kubelet, k8s-node2 MountVolume.SetUp succeeded for volume "filebeat-conf"
Normal SuccessfulMountVolume 29m (x6 over 29m) kubelet, k8s-node2 (combined from similar events): MountVolume.SetUp succeeded for volume "default-token-v9mnv"
Normal Pulling 29m kubelet, k8s-node2 pulling image "oomk8s/readiness-check:2.0.0"
Normal Pulled 29m kubelet, k8s-node2 Successfully pulled image "oomk8s/readiness-check:2.0.0"
Normal Created 29m kubelet, k8s-node2 Created container
Normal Started 29m kubelet, k8s-node2 Started container
Normal Pulling 29m kubelet, k8s-node2 pulling image "nexus3.onap.org:10001/onap/appc-image:1.3.0-SNAPSHOT-latest"
Normal Pulled 21m kubelet, k8s-node2 Successfully pulled image "nexus3.onap.org:10001/onap/appc-image:1.3.0-SNAPSHOT-latest"
Normal Created 21m kubelet, k8s-node2 Created container
Normal Started 21m kubelet, k8s-node2 Started container
Normal Pulling 21m kubelet, k8s-node2 pulling image "docker.elastic.co/beats/filebeat:5.5.0"
Normal Pulled 21m kubelet, k8s-node2 Successfully pulled image "docker.elastic.co/beats/filebeat:5.5.0"
Normal Created 21m kubelet, k8s-node2 Created container
Warning Unhealthy 5m (x16 over 21m) kubelet, k8s-node2 Readiness probe failed: dial tcp 10.47.0.5:8181: getsockopt: connection refused
Get logs of containers inside each pod:
$ kubectl describe pod dev-appc-0 -n onap
$ kubectl logs dev-appc-0 appc-readiness -n onap # add -v=n {n:1:10) to get verbose logs.
2018-05-15 15:32:00,749 - INFO - Checking if appc-db is ready
2018-05-15 15:32:00,821 - INFO - appc-db is not ready.
2018-05-15 15:32:05,826 - INFO - Checking if appc-db is ready
2018-05-15 15:32:05,877 - INFO - appc-db is not ready.
2018-05-15 15:32:10,883 - INFO - Checking if appc-db is ready
2018-05-15 15:32:10,958 - INFO - appc-db is not ready.
2018-05-15 15:32:15,963 - INFO - Checking if appc-db is ready
2018-05-15 15:32:16,022 - INFO - appc-db is ready!
$ kubectl logs dev-appc-0 appc -n onap
$ kubectl logs dev-appc-0 filebeat-onap -n onap
$ kubectl describe pod dev-appc-db-0 -n onap
$ kubectl logs dev-appc-db-0 appc-db -n onap
$ kubectl logs dev-appc-db-0 init-mysql -n onap
$ kubectl logs dev-appc-db-0 clone-mysql -n onap
$ kubectl logs dev-appc-db-0 xtrabackup -n onap
List of Presistent Volumes..
Each DB pod, has got a presistent volume cliam (pvc), lined to a pv. PVC capacity must be less than or equal to PV. Their status must be "Bound".
$ kubectl get pv -n onap NAME CAPACITY ACCESS MODES RECLAIM POLICY STATUS CLAIM STORAGECLASS REASON AGE dev-appc-data0 1Gi RWO Retain Bound onap/dev-appc-data-dev-appc-0 dev-appc-data 41m dev-appc-data1 1Gi RWO Retain Bound onap/dev-appc-data-dev-appc-2 dev-appc-data 41m dev-appc-data2 1Gi RWO Retain Bound onap/dev-appc-data-dev-appc-1 dev-appc-data 41m dev-appc-db-data 1Gi RWX Retain Bound onap/dev-appc-db-data dev-appc-db-data 41m $ kubectl get pvc -n onap NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE dev-appc-data-dev-appc-0 Bound dev-appc-data0 1Gi RWO dev-appc-data 42m dev-appc-data-dev-appc-1 Bound dev-appc-data2 1Gi RWO dev-appc-data 42m dev-appc-data-dev-appc-2 Bound dev-appc-data1 1Gi RWO dev-appc-data 42m dev-appc-db-data Bound dev-appc-db-data 1Gi RWX dev-appc-db-data 42m
$ kubectl get serviceaccounts --all-namespaces $ kubectl get clusterrolebinding --all-namespaces $kubectl get deployment --all-namespaces NAMESPACE NAME DESIRED CURRENT UP-TO-DATE AVAILABLE AGE kube-system kube-dns 1 1 1 1 1d kube-system tiller-deploy 1 1 1 1 1d
Scale up or down APPC pods
decrease appc pods to 1 $ kubectl scale statefulset dev-appc -n onap --replicas=1 statefulset "dev-appc" scaled # verify that two APPC pods terminate with one APPC pod running $ kubectl get pods --all-namespaces -a | grep dev-appc onap dev-appc-0 2/2 Running 0 43m onap dev-appc-1 2/2 Terminating 0 43m onap dev-appc-2 2/2 Terminating 0 43m onap dev-appc-cdt-8cbf9d4d9-mhp4b 1/1 Running 0 43m onap dev-appc-db-0 2/2 Running 0 43m onap dev-appc-dgbuilder-54766c5b87-xw6c6 1/1 Running 0 43m increase APPC pods to 3 $ kubectl scale statefulset dev-appc -n onap --replicas=3 statefulset "dev-appc" scaled # verify that three APPC pods are running $ kubectl get pods --all-namespaces -o wide | grep dev-appc onap dev-appc-0 2/2 Running 0 49m 10.47.0.5 k8s-node2 onap dev-appc-1 2/2 Running 0 3m 10.36.0.8 k8s-node3 onap dev-appc-2 2/2 Running 0 3m 10.44.0.7 k8s-node1 onap dev-appc-cdt-8cbf9d4d9-mhp4b 1/1 Running 0 49m 10.47.0.1 k8s-node2 onap dev-appc-db-0 2/2 Running 0 49m 10.36.0.5 k8s-node3 onap dev-appc-dgbuilder-54766c5b87-xw6c6 1/1 Running 0 49m 10.44.0.2 k8s-node1