| Table of Contents |
|---|
| Note |
|---|
Hint: This page refers to "Casablanca". For Dublin/El Alto goto here: SDN-R with OOM Rancher/Kubernetes Installation |
Introduction
This page discusses the process to install SDNR/SDNC into the ONAP installation at OWL (ONAP Open Wireless Laboratory) in WINLAB at Rutgers University. The ONAP installation itself OWL/WINLAB laboratory environment is described in the wiki page ONAP Open Wireless Laboratory (OWL) at Wireless Information Network Laboratory (WINLAB). This page describes how to install a development Docker image of SDNC into ONAP rather than the default image taken from the nexus3.onap.org:10001 repository.
...
Given the close deadline for the proof-of-concept, we have decided to develop our code in a github site that is outside of the ONAP gerrit (there is a description at this wiki page). The starting point for the code will be a branch of the ONAP gerrit, and we will fully conform with ONAP practices with the intention of submitting the code to the ONAP gerrit after the proof-of-concept. We have agreed to install the karaf features into CCSDK and then create a SDNC docker image from that CCSDK image. This is in accord approach accords with the policy of keeping features in CCSDK and will help us better leverage the work of the OOM group because their Helm charts install SDNC and not CCSDK. We have also agreed to use the Casablanca branch of both CCSDK and SDNC rather than the master branch because the master branch has been updated to evolve into Dublin and Casablaca will be a stable environment as we work on the proof-of-concept.
...
The Dockerfile in ccsdk/distribution/odlsli/src/main/docker that creates the CCSDK Docker images needs to be updated with the correct tag for the OpenDaylight Oxygen image.
Change:
| Code Block |
|---|
# Base ubuntu with added packages needed for open ecomp
FROM onap/ccsdk-odl-oxygen-image:${project.version} |
...
Notice that the version number for the Casablanca branch of SDNC is 1.4.2-SNAPSHOT, which differs from the version for CCSDK: 0.3.2-SNAPSHOT. Also, it specifies a property for the tag of the CCSDK Docker image as "0.3-STAGING-latest." The file sdnc/oam/installation/sdnc/installation/sdnc/src/main/docker/Dockerfile shows:
...
| Code Block |
|---|
# Base ubuntu with added packages needed for open ecomp
# FROM onap/ccsdk-odlsli-image:${ccsdk.docker.version}
FROM oof-pci/ccsdk-odlsli-image:0.3.2-SNAPSHOT
... |
With that single change, one can navigate to sdnc/oam/installation/sdnc and execute the command "mvn clean install -P docker" to create the custom SDNC image. One now has these images.
...
| Code Block |
|---|
% docker login --username <docker-hub-username> % docker tag onap/sdnc-image:1.4.2-SNAPSHOT <docker-hub-username>/oof-pci-sdnr:1.4.2-SNAPSHOT % docker push <docker-hub-username>/oof-pci-sdnr:1.4.2-SNAPSHOT The push refers to repository [docker.io/<docker-hub-username>/oof-pci-sdnr] 03e7ad007451: Pushed a0a1cf35dfbe: Pushed a07a5ef548f3: Pushed 00f72359482f: Pushed e8bd422087d4: Pushed e2049f74dbc7: Pushed a6be3b814740: Pushed 2aee35f4b0cf: Pushed cdfcf3c88e0c: Pushed 079c4c5e0c3b: Pushed c4645863df89: Pushed c931e6de9fae: Pushed dda32bf9f38e: Pushed a9d2e609edd2: Pushed 7f1e7f156f10: Pushed fd502652d1b6: Pushed 1be2b014d5b5: Pushed 95002f737271: Pushed daf5c98fd708: Pushed 6ddb554c87b4: Pushed 095019da6309: Pushed 6aaca5663342: Pushed 493565e7bfc4: Pushed a211906d4a22: Pushed 5d3087e4738c: Pushed 2940f1099458: Pushed f17a07942400: Pushed 93c6b053ea3a: Layer already exists ba2b9e9c0ba4: Layer already exists 2ee1b8bcd8b9: Layer already exists 8814cf621812: Layer already exists f332a5c37505: Layer already exists f1dfa8049aa6: Layer already exists 79109c0f8a0b: Layer already exists 33db8ccd260b: Layer already exists b8c891f0ffec: Layer already exists 1.4.2-SNAPSHOT: digest: sha256:381f062e441ae3ea32413f002a6cac83161d8280edcee1b85c5257889a024420 size: 7848 |
...
The instructions to create an ONAP installation using the OOM Rancher/Kubernetes approach are in the ONAP wiki site (be sure to select the Casablanca version of the instructions). Once installed, there are further instructions on deploying ONAP at this wiki page.
Working with the ONAP oom and integration repositories in the "ubuntu" home directory in sb4-rancher
...
| sudo -i -u ubuntu | Change to user ubuntu |
cd ~/git/oom && git status && git checkout . && git pull | Discard any changes in the oom repository and pull down the latest. I assume that we keep all of our changes in override files and other locations |
| cd ~/git/integration | This repository maintains version numbers of the latest code for the ONAP components. There is information about the repository at https://gerrit.onap.org/r/gitweb?p=integration.git;a=summary. |
git pull Get the latest; currently working in the master branch. There is no Casablanca branch.checkout casablanca | We agreed to use the casablanca release for the proof-of-concept |
cd ~/git/integration/version-manifest/src/main/scripts | This folder contains scripts that update the OOM repository with the correct version numbers |
./update-oom-image-versions.sh \ ~/git/integration/version-manifest/src/main/resources/docker-manifest-stagingrelease.csv \ ~/git/oom | Execute a script to update version numbers in the Helm charts in the oom/kubernetes directory. This will make changes to the values.yaml files, so “git status” in ~/git/oom will return many changes. I emphasize “staging” "Release” because there is also a “release” “staging” script. We want to use the staging release version numbers. |
cd ~/git/oom/kubernetes | Start following instructions at https://wiki.onap.org/display/DW/OOM+Helm+%28un%29Deploy+plugins |
sudo cp -r ~/oom/kubernetes/helm/plugins/ ~/.helm | Get the Helm deploy plugin developed by the OOM group |
make repo | This updates the Helm repo served by a local Helm process listening on port localhost:8879 |
make && make onap | I think this updates the local Helm repo with the latest versions in ~/git/oom/kubernetes. These commands take a while. |
...
To install the development image rather than the nexus3 image, open a terminal session with the VM containing the Rancher controller (sb4-rancher). There are instructions on how to create a ssh tunnel to sb4-rancher at this wiki page. Once logged in, we must update parameters in the values.yaml file in the Helm chart for SDNC in the OOM repository, shown here.
...
The simplest way to override the values is to copy the entire values.yaml file into a separate file (I use ~/oof-pci/override-sndc.yaml) and modify the relevant parameters in that new file. The new values are shown below. We identify the repository with the source image name and tag, create a cluster of three ODL members, and create a redundant MySQL deployment of two instances.
...
#################################################################
# Application configuration defaults.
#################################################################
# application images
repository: nexus3.onap.org:10001
repositoryOverride: registry.hub.docker.com
pullPolicy: Always
#image: onap/sdnc-image:1.4.1
image: ft3e0tab7p92qsoceonq/oof-pci-sdnr:1.4.2-SNAPSHOT
...
mysql:
nameOverride: sdnc-db
service:
name: sdnc-dbhost
internalPort: 3306
nfsprovisionerPrefix: sdnc
sdnctlPrefix: sdnc
persistence:
mountSubPath: sdnc/mysql
enabled: true
disableNfsProvisioner: true
replicaCount: 2
geoEnabled: false
...
# default number of instances
replicaCount: 3
...
By default, the OOM Rancher/Kubernetes script installs all of the components, which we do not need for the proof-of-concept. We identify which components to install by copying the ~/git/oom/kubernetes/onap/values.yaml file into a separate "override" file (~/oof-pci/override-onap.yaml) and changing "enabled: true" to "enabled: false" for the unneeded components. Currently, these are the selected components.
| aaf | false |
| aai | true |
| appc | false |
| clamp | false |
| cli | false |
| consul | false |
| contrib | false |
| dcaegen2 | false |
| dmaap | true |
| esr | false |
| log | true |
| sniro-emulator | true |
| oof | true |
| msb | false |
| multicloud | false |
| nbi | false |
| policy | true |
| pomba | false |
| portal | true |
| robot | true |
| sdc | false |
| sdnc | true |
| so | true |
| uui | false |
| vfc | false |
| vid | false |
| vnfsdk | false |
Command to install ONAP with the development image
Following the guidelines at the OOM wiki page, I use this command to install ONAP with the desired configuration. The ~/oof-pci files are located into https://github.com/onap-oof-pci-poc/ccsdk repository.
| Code Block |
|---|
cd ~/git/oom/kubernetes helm install sdnc/ -n demo-sdnc --namespace onap -f ~/oof-pci/override-onap.yaml -f ~/oof-pci/override-sdnc.yaml |
...
If there is already an instance SDNC installed, it must be deleted before installing a new version. I use Use these commands.
| Code Block |
|---|
helm del demo-sdnc --purge kubectl get persistentvolumeclaims -n onap | grep demo-sdnc | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumeclaims -n onap \1/' | bash kubectl get persistentvolumes -n onap | grep demo-sdnc | sed -r 's/(^[^ ]+).*/kubectl delete persistentvolumes -n onap \1/' | bash kubectl get secrets -n onap | grep demo-sdnc | sed -r 's/(^[^ ]+).*/kubectl delete secrets -n onap \1/' | bash kubectl get clusterrolebindings -n onap | grep demo-sdnc | sed -r 's/(^[^ ]+).*/kubectl delete clusterrolebindings -n onap \1/' | bash |
The first command deletes SDNC but, despite the "--purge" option, some residual resources remain. The subsequent commands discovers those resources and generates commands that can be copied and pasted into your terminal session to be executed. If you know how to pipe a string into bash so it can be executed directly, kindly update this wiki pagesome residual resources remain. The subsequent commands discover and delete those resources. The "helm del..." command takes some time, so please be patient. Once SDNC has been deleted, you can install the new version using the commands in the previous section.
...
Now that SDNC/SDNR is deployed, how can you access it? To access the browser interfaces of SDNC/SDNR, I you can use this sequence of commands. First:
...
We see that there are three instances of SDNC running and two instances of SDNC-DB and that they are deployed in different nodes, as expected. All of the pods have private IP addresses that are not accessible from outside the ONAP deployment, but demo-sdnc-sdnc-0 is installed in NODE sb4-k8s-4, which has IP address 10.31.1.79. We If you cannot use ping to determine the IP address of the node, the command "kubectl describe node <node-name> -n <namespace>" will provide the address.
You can now enter this command.
| Code Block |
|---|
% kubectl get svc -n onap | grep NAME && kubectl get svc -n onap | grep sdnc NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE sdnc NodePort 10.43.141.133 <none> 8282:30202/TCP,8202:30208/TCP,8280:30246/TCP,8443:30267/TCP 20h sdnc-ansible-server ClusterIP 10.43.41.91 <none> 8000/TCP 20h sdnc-cluster ClusterIP None <none> 2550/TCP 20h sdnc-dbhost ClusterIP None <none> 3306/TCP 20h sdnc-dbhost-read ClusterIP 10.43.100.184 <none> 3306/TCP 20h sdnc-dgbuilder NodePort 10.43.16.12 <none> 3000:30203/TCP 20h sdnc-dmaap-listener ClusterIP None <none> <none> 20h sdnc-portal NodePort 10.43.40.149 <none> 8843:30201/TCP 20h sdnc-sdnctldb01 ClusterIP None <none> 3306/TCP 20h sdnc-sdnctldb02 ClusterIP None <none> 3306/TCP 20h sdnc-ueb-listener ClusterIP None <none> <none> 20h so-sdnc-adapter ClusterIP 10.43.141.124 <none> 8086/TCP 2d |
SDNC is presenting a service at a NodePort that is accessible from outside the ONAP installation. PORT 8282:30202 means that port 30202 is accessible externally and maps to internal port 8282 (I'm not sure why 8282 rather than 8181; a port mapping from 8282 to 8181 may be set in a Dockerfilethe Dockerfile that creates the SDNC image maps host port 8282 to container port 8181). Therefore, SDNC is listening at sb4-k8s-4:30202, or 10.31.1.79:30202. By creating a ssh tunnel to sb4-k8s-4 (described here), one can open a browser to localhost:30202/apidoc/explorer/index.html and see this.
...