Page Comparison

This page mainly describes the template design steps of option1  for the E2E Network Slicing use case for Guilin release.

...

1. In the General section, complete all required fields.

• Suggest 'CN_NSST' as the name to indicate the meaning of the service.
• Select ‘CN NSST’ as Category.
• Provide 'ONAP_internal' as Service Role

2. NSST should be composed of network service(NS).  For NS helm artifacts, CBA package and other design time activities, please follow below link:

    https://wikilf-onap.onapatlassian.orgnet/wiki/display/DW/5GC+Instantiation+and+Modify+Config+flow+through+CDS

    E2E Network Slicing Meeting Notes for Oct 12, 2020 – Design Time Demo (32:00 - 58:00)

3. In Composition section, drag the elements of ‘Fiveg’(NS) from the Elements palette to the service canvas.

4. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

c. Set property values as shown bellow.

5. Distribute the service model and check the results.

2.Create TN_Network_Req_T

...

1. In the General section, complete all required fields.

• Suggest 'TN_Network_Req_T' as the name to indicate the meaning of the service.
• Select ‘TN Network Requirement’ as Category.
• Provide 'ONAP_internal' as Service Role

2. In Properties Assignment section, define the following service properties.

Image Modified

3. Distribute the service model and check the results.

3.Create TN_Network_Req_AR（Allotted Resource)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'TN_Network_Req_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP' as Vendor Name.
• Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

4.Create TN_BH_NSST

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

• Suggest 'TN_BH_NSST' as the name to indicate the meaning of the service.
• Select ‘TN BH NSST’ as Category.
• Provide 'ONAP_internal' as Service Role

2. In Composition section，search 'TN_Network_Req_AR', drag the element from the Elements palette to the service canvas.

3.In Properties Assignment section, define the following service properties.

4. Distribute the service model and check the results.

5.Create TN_FH_AR（Allotted Resource)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'TN_FH_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP' as Vendor Name.
• Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

6.Create TN_MH_AR（Allotted Resource)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'TN_MH_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP' as Vendor Name.
• Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

7.Create TN_MH_NSST

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

• Suggest 'TN_MH_NSST' as the name to indicate the meaning of the service.
• Select ‘TN MH NSST’ as Category.
• Provide 'TRANSPORT' as Service Type.
• Provide 'TN_MH' as Service Role.

2. In Composition section，search 'TN_MH_AR', drag the element from the Elements palette to the service canvas.

...

1. In the General section, complete all required fields.

• Suggest 'TN_FH_NSST' as the name to indicate the meaning of the service.
• Select ‘TN FH NSST’ as Category.
• Provide 'TRANSPORT' as Service Type.
• Provide 'TN_FH' as Service Role.

2. In Composition section，search 'TN_FH_AR', drag the element from the Elements palette to the service canvas.

...

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

• Suggest 'NrtRIC_resource' as the name to indicate the meaning of the service.
• Select ‘Network Elements’ as Category.
• Provide '5G RAN' as Vendor Name.
• Provide '1' as Vendor Release.

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

• Rename ExtCP2 as 'EP_E2'.

10.Create CUCP_Resource 

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

• Suggest 'CUCP_Resource' as the name to indicate the meaning of the service.
• Select ‘Network Elements’ as Category.
• Provide '5G RAN' as Vendor Name
• Provide '1' as Vendor Release

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

• Rename ExtCP2 as 'EP_NG_c'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.

11.Create CUUP_Resource 

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

• Suggest 'CUUP_Resource' as the name to indicate the meaning of the service.
• Select ‘Network Elements’ as Category.
• Provide '5G RAN' as Vendor Name
• Provide '1' as Vendor Release

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

• Rename ExtCP2 as 'EP_NG_u'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.

12.Create DU_Resource 

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

• Suggest 'DU_Resource' as the name to indicate the meaning of the service.
• Select ‘Network Elements’ as Category.
• Provide '5G RAN' as Vendor Name
• Provide '1' as Vendor Release

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

• Rename ExtCP2 as 'EP_E2'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_FH'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.

13.Create RAN_NF Service Template

...

1. In the General section, complete all required fields.

• Suggest 'RAN_NF_NSST' as the name to indicate the meaning of the service.
• Select ‘AN NF NSST’ as Category.
• Provide 'RAN' as Service Type.
• Provide 'AN_NF' as Service Role.

2. In Composition section，drag the elements of ‘NrtRIC_resource’，‘CUCP_Resource’，‘CUUP_Resource’, 'DU_Resource' from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

Image Modified

4. Distribute the service model and check the results.

14.Create TESTRANTOPNSST(TOP RAN Service Template)

...

1. In the General section, complete all required fields.

• Suggest 'TESTRANTOPNSST' as the name to indicate the meaning of the service.
• Select ‘AN NSST’ as Category.
• Provide 'RAN' as Service Type.
• Provide 'ONAP_internal' as Service Role.

2. In Composition section，drag the elements of ‘RAN_NF_NSST’，‘TN_MH_NSST’，‘TN_FH_NSST’ from the Elements palette to the service canvas.

3.In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

Image Modified

4. Distribute the service model and check the results.

15.Create CN_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP' as Vendor Name.
• Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of CN_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

16.Create Tn_BH_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP' as Vendor Name.
• Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_BH_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

17.Create AN_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP' as Vendor Name.
• Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TESTRANTOPNSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

18.Create NSTO1 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'NSTO1' as the name to indicate the meaning of the service.
• Select ‘NST’ as Category.
• Suggest 'ONAP_internal' as Service Role

2. In Composition section，drag the elements of ‘AN_AR’，‘Tn_BH_AR’，‘CN_AR’ from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click Image Modified

Add the property "latency" as a separate property of type integer and provide the value as 45

Set property values as shown bellow.

Image Modified

4. Distribute the service model and check the results.

19.Create Slice_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'Slice_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Select 'providing_service_invariant_uuid' and 'providing_service_uuid' and click Declare Input.

Image Modified

20.Create TN_SliceProfile Service Template

...

1. In the General section, complete all required fields.

• Suggest 'TN_SliceProfile' as the name to indicate the meaning of the service.
• Select ‘TN SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Add some properties as the picture shown bellow.

Image Modified

b. Select all properties and click Declare Input.

c. Click 'Slice_AR 0'in the right pane

d. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

4. Distribute the service model and check the results.

21.Create CN_SliceProfile Service Template

...

1. In the General section, complete all required fields.

• Suggest 'CN_SliceProfile' as the name to indicate the meaning of the service.
• Select ‘CN SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. Properties Assignment section, define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.SliceProfile’ as type.

c.  Add some properties as shown bellow.

d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）

e. Click 'Slice_AR 0'in the right pane

f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

4. Distribute the service model and check the results.

22.Create SliceProfile_AN_NF_O1 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'SliceProfile_AN_NF_O1' as the name to indicate the meaning of the service.
• Select ‘AN NF SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.SliceProfile’ as type.

c.  Add some properties as shown bellow.

Image Modified

d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）

e. Click 'Slice_AR 0'in the right pane

f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

Image Modified

4. Distribute the service model and check the results.

23.Create SliceProfile_AN_O1 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'SliceProfile_AN_O1' as the name to indicate the meaning of the service.
• Select ‘AN SliceProfile’ as Category.

2. In Composition section，drag the elements of ‘SliceProfile_AN_NF_O1’，‘TN_SliceProfile’ from the Elements palette to the service canvas.

24.Create ServiceProfile_O1 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'ServiceProfile_O1' as the name to indicate the meaning of the service.
• Select ‘ServiceProfile’ as Category.

2. In Composition section，search 'Slice_AR', ’SliceProfile_CN‘，‘SliceProfile_AN_O1’，‘SliceProfile_TN’，drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.ServiceProfile’ as type.

c. Select some attributes of  ServiceProfile as bellow picture shows and click Declare Input .

Image Modified

d. Add input for activityFactor param with a value(i.e. 20)

4. Distribute the service model and check the results.

25.Create CST_O1 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'CST_O1' as the name to indicate the meaning of the service.
• Select ‘CST’ as Category.
• Fill in the "Service Type" field with the value "embb"

2. In Composition section，search 'ServiceProfile_O2O1', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.CSProperties’ as type.

c. Select all attributes of  ServiceProfile except 'sNSSAI' and click Declare Input .

4. Distribute the service model and check the results.

A&AI Configuration:

If the service distribution to A&AI failed, like the picture shows bellow：

...

Add 'ServiceProfile' and 'NSTAR' model to A&AI through postman.(ServiceProfile/NSTAR Model Id and Invariant Id can be find on SDC page.)

...