Template Design for Option 1
This page mainly describes the template design steps of option1 for the E2E Network Slicing use case for Guilin release.
Template design for Option1 is as folllows:
Sample Service Templates for Option 1:
- 1 Create Service Category
- 2 1.Create CN_NSST
- 3 2.Create TN_Network_Req_T
- 4 3.Create TN_Network_Req_AR（Allotted Resource)
- 5 4.Create TN_BH_NSST
- 6 5.Create TN_FH_AR（Allotted Resource)
- 7 6.Create TN_MH_AR（Allotted Resource)
- 8 7.Create TN_MH_NSST
- 9 8.Create TN_FH_NSST
- 10 9.Create NrtRIC_resource
- 11 10.Create CUCP_Resource
- 12 11.Create CUUP_Resource
- 13 12.Create DU_Resource
- 14 13.Create RAN_NF Service Template
- 15 14.Create TESTRANTOPNSST(TOP RAN Service Template)
- 16 15.Create CN_AR（Allotted Resource）
- 17 16.Create Tn_BH_AR（Allotted Resource）
- 18 17.Create AN_AR（Allotted Resource）
- 19 18.Create NSTO1 Service Template
- 20 19.Create Slice_AR（Allotted Resource）
- 21 20.Create TN_SliceProfile Service Template
- 22 21.Create CN_SliceProfile Service Template
- 23 22.Create SliceProfile_AN_NF_O1 Service Template
- 24 23.Create SliceProfile_AN_O1 Service Template
- 25 24.Create ServiceProfile_O1 Service Template
- 26 25.Create CST_O1 Service Template
- 27 A&AI Configuration:
Create Service Category
Login SDC HOME page with Admin Role，create the following categories:
CST，ServiceProfile，AN SliceProfile，AN NF Slice Profile, CN SliceProfile，TN SliceProfile，NST， TN BH NSST, TN MH NSST, TN FH NSST, TN Network Requirement，AN NF NSST，CN NSST, AN NSST.
1.Create CN_NSST
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'CN_NSST' as the name to indicate the meaning of the service.
Select ‘CN NSST’ as Category.
Provide 'ONAP_internal' as Service Role
2. NSST should be composed of network service(NS). For NS helm artifacts, CBA package and other design time activities, please follow below link:
https://lf-onap.atlassian.net/wiki/display/DW/5GC+Instantiation+and+Modify+Config+flow+through+CDS
E2E Network Slicing Meeting Notes for Oct 12, 2020 – Design Time Demo (32:00 - 58:00)
3. In Composition section, drag the elements of ‘Fiveg’(NS) from the Elements palette to the service canvas.
4. In Properties Assignment section,define Service properties.
a. Click
b. Input name and select ‘org.openecomp.datatypes.NSSCapabilities’ as type.
c. Set property values as shown bellow.
5. Distribute the service model and check the results.
2.Create TN_Network_Req_T
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'TN_Network_Req_T' as the name to indicate the meaning of the service.
Select ‘TN Network Requirement’ as Category.
Provide 'ONAP_internal' as Service Role
2. In Properties Assignment section, define the following service properties.
3. Distribute the service model and check the results.
3.Create TN_Network_Req_AR（Allotted Resource)
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
Suggest 'TN_Network_Req_AR' as the name to indicate the meaning of the service.
Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
4.Create TN_BH_NSST
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'TN_BH_NSST' as the name to indicate the meaning of the service.
Select ‘TN BH NSST’ as Category.
Provide 'ONAP_internal' as Service Role
2. In Composition section，search 'TN_Network_Req_AR', drag the element from the Elements palette to the service canvas.
3.In Properties Assignment section, define the following service properties.
4. Distribute the service model and check the results.
5.Create TN_FH_AR（Allotted Resource)
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
Suggest 'TN_FH_AR' as the name to indicate the meaning of the service.
Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
6.Create TN_MH_AR（Allotted Resource)
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
Suggest 'TN_MH_AR' as the name to indicate the meaning of the service.
Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
7.Create TN_MH_NSST
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'TN_MH_NSST' as the name to indicate the meaning of the service.
Select ‘TN MH NSST’ as Category.
Provide 'TRANSPORT' as Service Type.
Provide 'TN_MH' as Service Role.
2. In Composition section，search 'TN_MH_AR', drag the element from the Elements palette to the service canvas.
8.Create TN_FH_NSST
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'TN_FH_NSST' as the name to indicate the meaning of the service.
Select ‘TN FH NSST’ as Category.
Provide 'TRANSPORT' as Service Type.
Provide 'TN_FH' as Service Role.
2. In Composition section，search 'TN_FH_AR', drag the element from the Elements palette to the service canvas.
9.Create NrtRIC_resource
Login SDC HOME page with Designer Role, add new VF.
In the General section, complete all required fields.
Suggest 'NrtRIC_resource' as the name to indicate the meaning of the service.
Select ‘Network Elements’ as Category.
Provide '5G RAN' as Vendor Name.
Provide '1' as Vendor Release.
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
Rename ExtCP2 as 'EP_E2'.
10.Create CUCP_Resource
Login SDC HOME page with Designer Role, add new VF.
In the General section, complete all required fields.
Suggest 'CUCP_Resource' as the name to indicate the meaning of the service.
Select ‘Network Elements’ as Category.
Provide '5G RAN' as Vendor Name
Provide '1' as Vendor Release
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
Rename ExtCP2 as 'EP_NG_c'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.
11.Create CUUP_Resource
Login SDC HOME page with Designer Role, add new VF.
In the General section, complete all required fields.
Suggest 'CUUP_Resource' as the name to indicate the meaning of the service.
Select ‘Network Elements’ as Category.
Provide '5G RAN' as Vendor Name
Provide '1' as Vendor Release
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
Rename ExtCP2 as 'EP_NG_u'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.
12.Create DU_Resource
Login SDC HOME page with Designer Role, add new VF.
In the General section, complete all required fields.
Suggest 'DU_Resource' as the name to indicate the meaning of the service.
Select ‘Network Elements’ as Category.
Provide '5G RAN' as Vendor Name
Provide '1' as Vendor Release
2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.
Rename ExtCP2 as 'EP_E2'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_FH'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.
drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.
13.Create RAN_NF Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'RAN_NF_NSST' as the name to indicate the meaning of the service.
Select ‘AN NF NSST’ as Category.
Provide 'RAN' as Service Type.
Provide 'AN_NF' as Service Role.
2. In Composition section，drag the elements of ‘NrtRIC_resource’，‘CUCP_Resource’，‘CUUP_Resource’, 'DU_Resource' from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
b. Input name and select ‘org.openecomp.datatypes.NSSCapabilities’ as type.
4. Distribute the service model and check the results.
14.Create TESTRANTOPNSST(TOP RAN Service Template)
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'TESTRANTOPNSST' as the name to indicate the meaning of the service.
Select ‘AN NSST’ as Category.
Provide 'RAN' as Service Type.
Provide 'ONAP_internal' as Service Role.
2. In Composition section，drag the elements of ‘RAN_NF_NSST’，‘TN_MH_NSST’，‘TN_FH_NSST’ from the Elements palette to the service canvas.
3.In Properties Assignment section,define Service properties.
a. Click
b. Input name and select ‘org.openecomp.datatypes.NSSCapabilities’ as type.
4. Distribute the service model and check the results.
15.Create CN_AR（Allotted Resource）
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of CN_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
16.Create Tn_BH_AR（Allotted Resource）
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_BH_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
17.Create AN_AR（Allotted Resource）
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
Select ‘Allotted Resource’ as Category.
Provide 'ONAP' as Vendor Name.
Provide '1.0' as Vendor Release.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TESTRANTOPNSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
18.Create NSTO1 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'NSTO1' as the name to indicate the meaning of the service.
Select ‘NST’ as Category.
Suggest 'ONAP_internal' as Service Role
2. In Composition section，drag the elements of ‘AN_AR’，‘Tn_BH_AR’，‘CN_AR’ from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click
Add the property "latency" as a separate property of type integer and provide the value as 45
Set property values as shown bellow.
4. Distribute the service model and check the results.
19.Create Slice_AR（Allotted Resource）
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
Suggest 'Slice_AR' as the name to indicate the meaning of the service.
Select ‘Allotted Resource’ as Category.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Select 'providing_service_invariant_uuid' and 'providing_service_uuid' and click Declare Input.
20.Create TN_SliceProfile Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'TN_SliceProfile' as the name to indicate the meaning of the service.
Select ‘TN SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Add some properties as the picture shown bellow.
b. Select all properties and click Declare Input.
c. Click 'Slice_AR 0'in the right pane
d. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
21.Create CN_SliceProfile Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'CN_SliceProfile' as the name to indicate the meaning of the service.
Select ‘CN SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. Properties Assignment section, define Service properties.
a. Click
b. Input name and select ‘org.openecomp.datatypes.SliceProfile’ as type.
c. Add some properties as shown bellow.
d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）
e. Click 'Slice_AR 0'in the right pane
f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
22.Create SliceProfile_AN_NF_O1 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'SliceProfile_AN_NF_O1' as the name to indicate the meaning of the service.
Select ‘AN NF SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
b. Input name and select ‘org.openecomp.datatypes.SliceProfile’ as type.
c. Add some properties as shown bellow.
d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）
e. Click 'Slice_AR 0'in the right pane
f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
23.Create SliceProfile_AN_O1 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'SliceProfile_AN_O1' as the name to indicate the meaning of the service.
Select ‘AN SliceProfile’ as Category.
2. In Composition section，drag the elements of ‘SliceProfile_AN_NF_O1’，‘TN_SliceProfile’ from the Elements palette to the service canvas.
24.Create ServiceProfile_O1 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.
Suggest 'ServiceProfile_O1' as the name to indicate the meaning of the service.
Select ‘ServiceProfile’ as Category.
2. In Composition section，search 'Slice_AR', ’SliceProfile_CN‘，‘SliceProfile_AN_O1’，‘SliceProfile_TN’，drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
b. Input name and select ‘org.openecomp.datatypes.ServiceProfile’ as type.
c. Select some attributes of ServiceProfile as bellow picture shows and click Declare Input .
d. Add input for activityFactor param with a value(i.e. 20)
4. Distribute the service model and check the results.
25.Create CST_O1 Service Template
Login SDC HOME page with Designer Role, add new service.
1. In the General section, complete all required fields.