Page Comparison

This page mainly describes the template design steps of option2  for the E2E Network Slicing use case for Istanbul release.

...

1. In the General section, complete all required fields.

• Suggest 'TN_Network_Req_T' as the name to indicate the meaning of the service.
• Select ‘TN Network Requirement’ as Category.
• Provide 'ONAP_internal' as Service Role
• Provide Description and click on create button.

2. In Properties Assignment section, define the following service properties.

Image Modified

3. Distribute the service model and check the results.

2.Create TN_Network_Req_AR_BH（Allotted Resource)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'TN_Network_Req_AR_BH' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP' as Vendor Name.
• Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

3.CreateTN_Network_Req_AR_FH（Allotted Resource)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'TN_Network_Req_AR_FH' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP' as Vendor Name.
• Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

4.Create TN_Network_Req_AR_MH（Allotted Resource)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'TN_Network_Req_AR_MH' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP' as Vendor Name.
• Provide '1.0' as Vendor Release.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Req_T to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

5.Create CN_NSST 

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

• Suggest 'CN_NSST' as the name to indicate the meaning of the service.
• Select ‘CN NSST’ as Category.
• Provide 'ONAP_internal' as Service Role

2. NSST should be composed of network service(NS).  For NS helm artifacts, CBA package and other design time activities, please follow below link:

    https://wiki.onap.org/display/DW/5GC+Instantiation+and+Modify+Config+flow+through+CDS

3. In Composition section, drag the elements of ‘Fiveg’(NS) from the Elements palette to the service canvas.

4. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

c. Set property values as shown bellow.

6.Create TN_BH_NSST

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

• Suggest 'TN_BH_NSST' as the name to indicate the meaning of the service.
• Select ‘TN BH NSST’ as Category.
• Provide 'ONAP_internal' as Service Role

2. In Composition section，search 'TN_Network_Req_AR_BH', drag the element from the Elements palette to the service canvas.

3.In Properties Assignment section, define the following service properties.

4. Distribute the service model and check the results.

7.Create TN_MH_NSST

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

• Suggest 'TN_MH_NSST' as the name to indicate the meaning of the service.
• Select ‘TN MH NSST’ as Category.
• Provide 'TRANSPORT' as Service Type.
• Provide 'TN_MH' as Service Role.

2. In Composition section，search 'TN_MHNetwork_Req_AR_MH', drag the element from the Elements palette to the service canvas.

...

1. In the General section, complete all required fields.

• Suggest 'TN_FH_NSST' as the name to indicate the meaning of the service.
• Select ‘TN FH NSST’ as Category.
• Provide 'TRANSPORT' as Service Type.
• Provide 'TN_FH' as Service Role.

2. In Composition section，search 'TN_FHNetwork_Req_AR_FH', drag the element from the Elements palette to the service canvas.

...

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

• Suggest 'NrtRIC_resource' as the name to indicate the meaning of the service.
• Select ‘Network Elements’ as Category.
• Provide '5G RAN' as Vendor Name.
• Provide '1' as Vendor Release.

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

• Rename ExtCP2 as 'EP_E2'.

10.Create CUCP_Resource 

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

• Suggest 'CUCP_Resource' as the name to indicate the meaning of the service.
• Select ‘Network Elements’ as Category.
• Provide '5G RAN' as Vendor Name
• Provide '1' as Vendor Release

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

• Rename ExtCP2 as 'EP_NG_c'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.

11.Create CUUP_Resource 

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

• Suggest 'CUUP_Resource' as the name to indicate the meaning of the service.
• Select ‘Network Elements’ as Category.
• Provide '5G RAN' as Vendor Name
• Provide '1' as Vendor Release

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

• Rename ExtCP2 as 'EP_NG_u'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E1'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_E2'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.

12.Create DU_Resource 

Login SDC HOME page with Designer Role, add new VF.

In the General section, complete all required fields.

• Suggest 'DU_Resource' as the name to indicate the meaning of the service.
• Select ‘Network Elements’ as Category.
• Provide '5G RAN' as Vendor Name
• Provide '1' as Vendor Release

2. In Composition section，search 'ExtCP2' from Generic Category, drag the element from the Elements palette to the service canvas.

• Rename ExtCP2 as 'EP_E2'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_FH'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1C'.
• drag another 'ExtCP2' element from Generic Category and rename ExtCP2 as 'EP_F1U'.

13.Create RAN_NF NSST

Login SDC HOME page with Designer Role, add new service.

1. In the General section, complete all required fields.

• Suggest 'RAN_NF_NSST' as the name to indicate the meaning of the service.
• Select ‘AN NF NSST’ as Category.
• Provide 'RAN' as Service Type.
• Provide 'AN_NF' 'ONAP_internal' as Service Role.

2. In Composition section，drag the elements of ‘NrtRIC_resource’，‘CUCP_Resource’，‘CUUP_Resource’, 'DU_Resource' from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

Image Modified

4. Distribute the service model and check the results.

14.Create CN_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Select ‘Allotted Resource’ as Category.
• Provide 'ONAP_internal' as Service Role

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of CN_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

15.Create Tn_BH_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_BH_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

16.Create Tn_FH_AR（Allotted Resource）(New)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_FH_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

17.Create Tn_MH_AR（Allotted Resource）(New)

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_MH_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

18.Create AN_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of RAN_NF_NSST to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

19.Create NSTO2 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'NSTO2' as the name to indicate the meaning of the service.
• Select ‘NST’ as Category.
• Suggest 'ONAP_iternal' as Service Role

2. In Composition section，drag the elements of ‘AN_AR’，‘Tn_BH_AR’，，‘Tn_FH_AR’，，‘Tn_MH_AR’，‘CN_AR’ from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click Image Modified

Set property values as shown bellow.

Image Modified

4. Distribute the service model and check the results.

20.Create Slice_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'Slice_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Select 'providing_service_invariant_uuid' and 'providing_service_uuid' and click Declare Input.

Image Modified

21.Create TN_SliceProfile Service Template

...

1. In the General section, complete all required fields.

• Suggest 'TN_SliceProfile' as the name to indicate the meaning of the service.
• Select ‘TN SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Add some properties as the picture shown bellow.

Image Modified

b. Select all properties and click Declare Input.

c. Click 'Slice_AR 0'in the right pane

d. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

4. Distribute the service model and check the results.

22.Create CN_SliceProfile Service Template

...

1. In the General section, complete all required fields.

• Suggest 'CN_SliceProfile' as the name to indicate the meaning of the service.
• Select ‘CN SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. Properties Assignment section, define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.SliceProfile’ as type.

c.  Add some properties as shown bellow.

d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）

e. Click 'Slice_AR 0'in the right pane

f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

4. Distribute the service model and check the results.

23.Create SliceProfile_AN_NF_O2 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'SliceProfile_AN_NF_O2' as the name to indicate the meaning of the service.
• Select ‘AN NF SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.SliceProfile’ as type.

c.  Add some properties as shown bellow.

Image Modified

d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）

e. Click 'Slice_AR 0'in the right pane

f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

Image Modified

4. Distribute the service model and check the results.

24.Create ServiceProfile_O2 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'ServiceProfile_O1' as the name to indicate the meaning of the service.
• Select ‘ServiceProfile’ as Category.

2. In Composition section，search 'Slice_AR', ’SliceProfile_CN‘，‘SliceProfile_AN_NF_O2’,‘SliceProfile_TN’，drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.ServiceProfile’ as type.

c. Select some attributes of  ServiceProfile as bellow picture shows and click Declare Input .

Image Modified

d. Add input for activityFactor param with a value(i.e. 20)

4. Distribute the service model and check the results.

25.Create CST_O2 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'CST_O1' as the name to indicate the meaning of the service.
• Select ‘CST’ as Category.
• Fill in the "Service Type" field with the value "embb"

2. In Composition section，search 'ServiceProfile_O2', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.CSProperties’ as type.

c. Select all attributes of  ServiceProfile except 'sNSSAI' and click Declare Input .

4. Distribute the service model and check the results.

A&AI Configuration:

If the service distribution to A&AI failed, like the picture shows bellow：

...

Add 'ServiceProfile' and 'NSTAR' model to A&AI through postman.(ServiceProfile/NSTAR Model Id and Invariant Id can be find on SDC page.)

...