Page Comparison

Image Removed

Image AddedOSAM GW:

For the first phase, OSAM GW is going to be stored in OSAM DB. Access Pod can consist of OSAM Gateway as Local OSAM Gateway.

• id(string): identifier for OSAM GW
• Ip IP address(String): IP address of the OSAM GW

...

Access Pod is a PNF that will be fetched from ONAP(AAI). Its relation such as subscribers and devices will be kept in OSAM DB. CorrelationId will play a key role for that purpose. Moreover, PNF location information could be kept in AAI or OSAM DB.(depends on use case).

VENDOR:

Vendor of the device. There is a one to one relationship between the vendor and device. It consists of the following properties:

• id (string): Identifier of the Vendor.

• match_count(double): match packet count.

• error_count(double): error packet count.

FLOWS:

 Consist of the rules which matches the criteria to action. It consists of the following properties:

• id (string): Identifier of the Flows.

• match_criteria(string): Criteria of the action to apply.

• action(string): The action to apply for the result of the match with match_criteria. 
• statistics_id (array): statistics id array of the flows
• time(string): applied time of the flow.

STATICS:

Result statistics of the applied criteria. It consists of the following properties:

• id (string): Identifier of the Vendor.

• name(string): Name of the Vendor.

ACCESS DEVICE:

Device is an abstract model definition of a physical device. A device can be an OLT or an ONT Device. It consists of the following properties: 

• id (string): Identifier of the Device.

• type(enum): Type indicates the device as an OLT device or an ONT device.

• serial_number(string): Serial number of the Device.
• opStatus(enum): Indicates the current status of the device. It can be active, failed, deactive... de-active.
• adminState(enum): Indicates that device is provisioned or not.
• connectionStatus(enum): Indicates the connection status of the device. It can be unknown, reachable, unreachable...

• mac_address (string): Mac address of the device

• ipv4_address (string): Ipv4 address of the device

• ipv6_address (string): Ipv6 address of the device

• vendor_id (int): (foreign key) vendor id of the device
• access_pod_id(int): (foreign key) access_pod id of the device

PORT:

Port is an abstract model definition of a port. A port can be an OLT or an ONT port. It consists of the following properties: 

• no (int): Identifier of the port.

• type(enum): Type indicates the device as an PON_OLT or an PON_ONT.

• owner_device_id(string): Serial number of the Device.
• opStatus(enum): Indicates the current status of the device. It can be active, failed, deactive... 
• adminState(enum): Indicates that device is provisioned or not.
• rx_packets (Double): Received packets count.
• rx_bytes (Double): Received bytes count.
• rx_errors (Double): Received error count.
• tx_packets (Double): Transmitted packets count.
• tx_bytes (Double): Transmitted bytes count.
• tx_errors (Double): Errors count while transmitted.

...

• device_id (string): Identifier of the connected device

• port_no (int): Identifier of the connected port.

ADDRESS INFO:

...

• .

...

• mac_address (string): Mac address of the device

• ipv4_address (string): Ipv4 address of the device

ipv6_address (string): Ipv6 address of the device

PMCONFIGS

PmConfigs object represents an array of PmConfig or PmGroupConfig objects. 

...

• type : (counter, gauge, state, context) type can be a counter value (to track how many times something has happened), a gauge (for instantaneous measurement types) a state or a context. 
• sample_freq : Frequency of the performance measurement
• name : The name of the measurement
• enabled : This value shows if the config is enabled or not. 
  
  

ACTIVE ALARMS/EVENTS

Alarms and events which are currently occured and active (would be deleted when the alarm state change as passive) with properties:  

• id(double): Identifier of the alarm or event.
• alarm_status(enum) :Can be active or deactive
• name (string) : The name of the alarm or event
• time  (string): The time which alarm or event occured.

HISTORICAL ALARMS/EVENTS

Keeps all the alarms and events which are occurred with properties:  

• id(double): Identifier of the alarm or event.
• alarm_status(enum) :Can be active or de-active.
• name (string): The name of the alarm or event.
• time  (string): The time which alarm or event occurred.

NAS CONFIGURATION

It is about remote radius server with properties:  

• nas_confiuration_id(double): Identifier of the nas.
• nas_port_id(double): Configuration port of the nas.
• nas_id(double): Radius server id.

AGGREGATION DEVICE

Leaf switch for the connection of the internet with properties:  

• id (string): Identifier of the Device.

• port(string): Connection port.

• ssl_connection(boolean): indacates that ssl_connection is open or not.
• name(string): name of the device.
• state(enum): Indicates that device is active or not.

• mac_address (string): Mac address of the device

• ipv4_address (string): Ipv4 address of the device

• ipv6_address (string): Ipv6 address of the device

• uplink_port(int): uplink port of the device

ACCESS DEVICE TO AGGREGATION DEVICE

Maps the access device to aggregation device with properties:  

• aggregation_device_id (string): foreign key of aggregation device id.

• access_device_id(string): foreign key of access device id.

SUBSCRIBER:

Subscriber is a model object that allows us to provision customer. 

• Id(string) -property refers to ONT uniport also it is an identifier for a subscriber. Must be given
• c-tag(int) -it is used by ONT device. Must be given
• s-tag(int)-it is used by OLT device. Must be given
• techProfileId(int) refers to technology profile id. To provision, the subscriber technology profile is required. (Technology profile details will be fetched from Access Pod.)
• upstreamBandwidthProfile(string) refers an upstream(ONT to OLT) traffic bandwidth profile id. (Traffic bandwidth profile details will be fetched from Access Pod.)
• downstreamBandwidthProfile(string) refers a downstream(OLT to ONT) traffic bandwidth profile id. (Traffic bandwidth profile details will be fetched from Access Pod.)
• nasPortId(string) refers a radius server port.
• Subscriber must be matched with OLT. OLT match is done with ConnectionPoint model.
• Connection Point indicates a bridge between OLT-device and Subscriber's ONT. Subscriber model has ConnectionPoint model as property.

CONNECTION POINT:

ConnectionPoint is a model that connects the Subscriber to OLT-Device.

• Id(string) -property refers to a serial number of OLT device
• hardwareIdentifier(string) -refers a mac address of OLT device
• ipAddress(string) -indicates an IP address of OLT device
• nasId(string) -indicates a radius server.