Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 100 Next »


Overview

The goal of this requirement is to implement new micro-service called CertService which will request certificates signed by external Certificate Authority (CA) using CMP over HTTP protocol. Uses CMPv2 client to send and receive CMPv2 messages.

CertService's client will be also provided so other ONAP components (aka end components) can easily get certificate from CertService. End component is an ONAP component (e.g. DCAE collector or controller) which requires certificate from CMPv2 server to protect external traffic and uses CertService's client to get it.

CertService's client communicates with CertService via REST API over HTTPS, while CertService with CMPv2 server via CMP over HTTP.

To proof that CertService works Open Source CMPv2 server (EJBCA) will be deployed and used in E2E tests.

It is planned that Network Functions (aka xNFs) will get certificates from the same CMPv2 server and the same CA hierarchy, but will use own means to get such certificates. Cause xNFs and ONAP will get certificates signed by the same root CA and will trust such root CA, both parties will automatically trust each other and can communicate with each other.

Context view

Architecture sketch

Simplified certificate enrollment flow

Security considerations

CertService's REST API is protected by mutual HTTPS, meaning server requests client's certificate and authenticate only requests with trusted certificate. After ONAP default installation only certificate from CertService's client is trusted. Authorization isn't supported in Frankfurt release.

Components description

CertService

REST API

MethodEndpointParameterReturned values


NameIs required?Transfer methodDescriptionNameAlways returned?Transfer methodDescription
GET

/v1/certificate/{caName}

CA nameYesPath parameterName of Certificate Authority which should sign sent CSR. Must match CertService's CMPv2 servers configuration.Error messageNo, only if error occurred on server sideBody (JSON)Verbose information what wrong happened on server side.
Base64 encoded CSR (Certificate Signing Request) in PEM formatYesHeaderCertificate Signing Request for given componentCertificate chainNo, only in success case.Body (JSON)Base64 encoded signed certificate with whole certificate chain (intermediate CA certificates) in PEM format. Signed certificate should be returned first and then all intermediate certificates in following order: singer of previous certificate till certificate which is signed by root CA. All certificates are in PEM format.
Base64 encoded private key in PEM formatYesHeaderPrivate key. Needed to create proof of possession (PoP)Trusted certificatesNo, only in success case.Body (JSON)Base64 encoded list of trusted certificates in PEM format. In other words list of root CAs which should be treated as trust anchors. Must contain root CA which was used to sign certificate and may contain other root CAs. Order doesn't matter. All certificates are in PEM format. 


Return HTTP codes:

HTTP codeDescription
200 (OK)Everything is ok. Certificate chain and trusted certificates returned
400 (Bad Request)Incorrect/missing CSR and/or private key
401 (Unauthorized)Missing client certificate or presented certificate is not trusted
404 (Not found)Invalid CA name in REST API call or wrong endpoint called
500 (Internal Server Error)In case of exception on server side.


OpenAPI

The best way to open Swagger documentation is to open it in new tab and, when asked, open it in your favorite browser. 



CMPv2 server properties

CertService contains configuration of CMPv2 servers. To enroll certificate at least one CMPv2 server has to be configured. CMPv2 servers configuration is read during CertService startup and to take runtime changes into account CertService's refresh configuration endpoint has to be called.

Section holds all properties which are planned to be supported by CertService for CMPv2 based server.


Parameter nameRequiredSyntaxDescriptionValidation rules
CA NameYesString (1-128)The CA name should include the name of the external CA server and the issuerDN, which is the distinguished name of the CA on the external CA server that will sign our certificate.

String (1-128)

Should be URL safe as it is used by clients as path parameter in REST calls

URLYesSchema + IPv4/FQDN + port + path

Url to CMPv2 server; includes mandatory parts: scheme (http://) and IPv4/FQDN and optional parts: port and path (alias); e.g. http://127.0.0.1:8080/pkix or http://127.0.0.1/ejbca/publicweb/cmp/cmp


NOTE: If FQDN is given ONAP must be able to resolve it without extra manual configuration

Must be correct URL

Must start with http:// scheme

If port given, port from 1-65535 range

Issuer DNYesString (4-256)Distinguished Name of the CA that will sign the certificate on the CMPv2 server side. When creating an end entity on the external CA server for client mode this IssuerDN will be passed through as the ca to sign for that user.

String (4-256)

Correct DN

CA ModeYesEnum (CLIENT|RA)Issuer mode (either Registration Authority (RA) or client mode)

Value from predefined set

Authentication data::IAKYesString (1-256)Initial authentication key, used, together with RV, to authenticate request in CMPv2 server

String (1-256)

Authentication data::RVYesString (1-256)Reference value, used, together with IAK, to authenticate request in CMPv2 server

String (1-256)


Example

{
   "cmpv2Servers":[
      {
         "caName":"TEST",
         "url":"http://127.0.0.1/ejbca/publicweb/cmp/cmp",
         "issuerDN":"CN=ManagementCA",
         "caMode":"CLIENT",
         "authentication":{
            "iak":"xxx",
            "rv":"yyy"
         }
      },
      {
         "caName":"TEST2",
         "url":"http://127.0.0.1/ejbca/publicweb/cmp/cmpRA",
         "issuerDN":"CN=ManagementCA2",
         "caMode":"RA",
         "authentication":{
            "iak":"xxx",
            "rv":"yyy"
         }
      }
   ]
}

CMPv2 client

CMPv2 client exposes only internal API and is called by CertService only.


Input table for CMPv2 client

CMPv2 will get two POJOs: first with CSR, plain fields extracted from CSR (like subject DN, list of SANs, etc) and private key (in general data passed via REST API call) and second with CMPv2 server details and one String: CA name.

Input valueInput typeDescription
CsrModelObjectPOJO which transfers sent CSR, plain fields extracted from CSR (like Common Name, Country, etc)
CsrModel:: csrorg.bouncycastle.pkcs.PKCS10CertificationRequestCertificate Signing Request received via REST API
CsrModel:: subjectDNorg.bouncycastle.asn1.x500.X500NameSubjectDN retrieved from sent CSR
CsrModel:: privateKeyjava.security.PrivateKeyPrivate key received via REST API
CsrModel:: publicKeyjava.security.PublicKeyPublic key retrieved from sent CSR
CsrModel:: sansList of StringsSubject Alterative Names retrieved from sent CSR
CMPv2ServerDetailsObjectPOJO which transfers CMPv2 server properties
CMPv2ServerDetails:: CA nameStringCA name as configured in CMPv2 server properties
CMPv2ServerDetails:: URLURL or StringURL to CMPv2 server as configured in CMPv2 server details
CMPv2ServerDetails:: IssuerDNorg.bouncycastle.asn1.x500.X500NameIssuer DN as configured in CMPv2 server details
CMPv2ServerDetails:: CA modeENUMCA mode as configured in CMPv2 server details
CMPv2ServerDetails:: IAKStringIAK as configured in CMPv2 server details
CMPv2ServerDetails:: RVStringRV as configured in CMPv2 server details
CA nameStringCA name received via REST API

CMPv2 client call to CMPv2 server

Relevant values in Initialization Request (IR) message sent to CMPv2 server:

Value

Description

Information Included

PKIHeaderContains information common to many PKI messages.

SenderDN

IssuerDN

ProtectionAlgorithm (used for PkiProtection below)

PKIBodyContains message-specific information ie. initialization request message

CertificateRequestMessage, which includes:

SubjectDN

IssuerDN

SubjectPublicKey

PKIProtectionContains bits that protect PKImessage (Specifically the iak/rv)


Return values from CMPv2 client

Following table represents return values from CMPv2 client.

Output valueOutput typeDescription
certificateChainList <java.security.cert.X509Certificate>Enrolled certificate with full certificate chain (all certificates of intermediate CAs), without root CA
trustedCertsList <java.security.cert.X509Certificate>All trusted certificates returned from CMPv2 server, including root CA



Test code for running cmpv2 client against EJBCA server through unit test

@Test
  public void testServerWithRealUrl() throws CmpClientException {

    setValidCsrMetaValuesAndDateValues();

    csrMeta.caUrl("http://127.0.0.1/ejbca/publicweb/cmp/cmpRA");
    csrMeta.password("mypassword");

    CmpClientImpl cmpClient = new CmpClientImpl(HttpClients.createDefault());
    cmpClient.createCertificate("data", "RA", csrMeta, cert, notBefore, notAfter);
  }

  private void setValidCsrMetaValuesAndDateValues() {
    ArrayList<RDN> rdns = new ArrayList<>();
    try {
      rdns.add(new RDN("O=CommonCompany"));
    } catch (CertException e) {
      e.printStackTrace();
    }
    csrMeta = new CSRMeta(rdns);
    csrMeta.cn("CN=CommonName");
    csrMeta.san("CommonName.com");
    csrMeta.password("password");
    csrMeta.email("CommonName@cn.com");
    csrMeta.issuerCn("CN=ManagementCA");
    when(kpg.generateKeyPair()).thenReturn(keyPair);
    csrMeta.keypair();
    csrMeta.caUrl("http://127.0.0.1/ejbca/publicweb/cmp/cmp");

    try {
      notBefore =
              new SimpleDateFormat("yyyy/MM/dd HH:mm:ss").parse("2019/11/11 12:00:00");
      notAfter =
              new SimpleDateFormat("yyyy/MM/dd HH:mm:ss").parse("2020/11/11 12:00:00");
    } catch (ParseException e) {
      e.printStackTrace();
    }
  }


Usage

Docker

Run CertService as docker via following command: 

docker run -p $PORT_MAPPING --name $NAME --mount $CMPV2_SERVERS_CONFIGURATION $IMAGE_NAME
e.g.
docker run -p 8080:8080 --name aaf-certservice-api --mount type=bind,source=/<absolute_path>/cmpServers.json,target=/etc/onap/aaf/certservice/cmpServers.json nexus3.onap.org:10001/onap/org.onap.aaf.certservice.aaf-certservice-api:$VERSION


Kubernetes

For Kubernetes helm chart is provided. Just overwrite needed values and deploy helm chart using following command: 

helm install --name $NAME --namespace onap $PATH_TO_HELM_CHART --values $PATH_TO_OVERRIDDEN_VALUES


CertService's client

CertService's client input properties

Below table presents all properties which should/can be passed to CertService's client to make a successful call to CertService to enroll certificate.


Parameter nameENV variable nameRequiredDefaultSyntaxValidation rulesDescriptionOrigin
UrlREQUEST_URLNohttps://aaf-cert-service-service:8443/v1/certificate/URLSyntax column

URL to Cert Service. Default value will be aligned with ONAP K8s deployment (Cert Service's K8s service name and port). Needs to be changed for plain docker deployment.

Application helm chart
TimeoutREQUEST_TIMEOUTNo30000

Int (0-120000)

Syntax columnTimeout for REST API calls. In miliseconds. A timeout value of zero is interpreted as an infinite timeout.Application helm chart
PathOUTPUT_PATHYes
String (1-256)

Syntax column

Path is valid *inx path

Path where client will output generated keystore and truststore. Normally this path should be on a volume which is used to transfer keystore and truststore between CertService's client and end componentApplication helm chart
CA nameCA_NAMEYes
String (1-128)

Syntax column

Must contain only alphanumeric characters

Name of CA which will enroll certificate. Must be same as configured on server side. Used in REST API callsOOM global value
Common NameCOMMON_NAMEYes
String (1-256)

Syntax column

CN can't contain (special characters (?, $, % and so on), IP addresses, Port numbers, or "http:// or https://")

Common name for which certificate from CMPv2 server should be issuedApplication helm chart
OrganizationORGANIZATIONYes
String (1-256)

Syntax column

Organization can't contain invalid characters from list "! @ # $ % ^ * ( ) ~ ? > < / \" (without "")

Organization for which certificate from CMPv2 server should be issuedOOM global value
Organization UnitORGANIZATION_UNITNoNot available in generated certificateString (0-256)Syntax columnOrganization unit for which certificate from CMPv2 server should be issuedOOM global value
LocationLOCATIONNoNot available in generated certificateString (0-256)

Syntax column


Location for which certificate from CMPv2 server should be issuedOOM global value
StateSTATEYes
String (1-256)Syntax columnState for which certificate from CMPv2 server should be issuedOOM global value
CountryCOUNTRYYes
String(2)C must be a 2-character ISO format country codeCountry for which certificate from CMPv2 server should be issuedOOM global value
SANsSANSNoNot available in generated certificate

String (0-2048)

SAN1[:SAN2]

Syntax column

Subject Alternative Names (SANs) for which certificate from CMPv2 server should be issued. Colon is used as delimiter, e.g. example.com:example.pl. The only supported type of SANs is DNS domain name.

NOTE: starting Honolulu release comma is used as delimiter, e.g. example.com,example.pl.

Application helm chart

Results

As the successful result of running CertService's client (exitCode = 0) following artifacts are created:


NameDescription
keystore.jksKeystore with certificate chain saved under 'certificate' alias. Protected by random generated password. Keystore in PKCS#12 format.
keystore.passFile with password to keystore. Password should be min. 16 chars long and should contain only alphanumeric characters and special characters like Underscore (_), Dollar ($) and Pound (#). Password should be random.
truststore.jksTruststore with all trusted certificates. Protected by random generated password. Every trusted certificate is saved under alias with 'trusted-certificate-' prefix. Truststore in PKCS#12 format.
truststore.passFile with password to truststore. Password should be min. 16 chars long and should contain only alphanumeric characters and special characters like Underscore (_), Dollar ($) and Pound (#). Password should be random.


In case of error CertService's client returns other exit codes (errorCode != 0). 

Usage

Docker

Run CertService's client as docker via following command:

AAFCERT_CLIENT_IMAGE=onap/org.onap.aaf.certservice.aaf-certservice-client
DOCKER_ENV_FILE= <path to envfile>
NETWORK_CERT_SERVICE= <docker network of cert service>
 
docker run --name aaf-certservice-client --env-file $DOCKER_ENV_FILE --network $NETWORK_CERT_SERVICE $AAFCERT_CLIENT_IMAGE


Kuberenetes

Cause ONAP is deployed in K8s, CertService's client will be delivered as independent container and should run as init container for end component. Both init container and end component must mount the same volume (persistent or ephemeral) to transfer generated artifacts.

Example

Volume to transfer generated artifacts should be mounted to application container (lines 57-61). Within K8s workload, CertService's client as init container should be added conditionally (lines 10-14 and 49). All needed ENV variables should be passed to CertService's client (lines 15-45). CertService's client should mount the same volume as application container (lines 46-48). Volume to transfer generated artifacts can be an emptyDir type (lines 64-67).

...                                 # WARNING - work in progress so still can change
kind: Deployment
metadata:
  ...
spec:
...
  template:
  ...
    spec:
      {{- if .Values.global.cmpv2Enabled }}
      initContainers:
        - name: cert-service-client
          image: {{ .Values.global.repository }}/{{ .Values.global.aaf.certServiceClient.image }}
          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
          env:
            - name: REQUEST_URL
              value: {{ .Values.global.aaf.certServiceClient.envVariables.requestURL }}
            - name: REQUEST_TIMEOUT
              value: {{ .Values.global.aaf.certServiceClient.envVariables.requestTimeout}}
            - name: OUTPUT_PATH
              value: {{ .Values.certificate.outputPath }}
            - name: CA_NAME
              value: {{ .Values.global.aaf.certServiceClient.envVariables.caName }}
            - name: COMMON_NAME
              value: {{ .Values.certificate.commonName }}
            - name: ORGANIZATION
              value: {{ .Values.global.aaf.certServiceClient.envVariables.cmpv2Organization }}
            - name: ORGANIZATION_UNIT
              value: {{ .Values.global.aaf.certServiceClient.envVariables.cmpv2OrganizationalUnit }}
            - name: LOCATION
              value: {{ .Values.global.aaf.certServiceClient.envVariables.cmpv2Location }}
            - name: STATE
              value: {{ .Values.global.aaf.certServiceClient.envVariables.cmpv2State }}
            - name: COUNTRY
              value: {{ .Values.global.aaf.certServiceClient.envVariables.cmpv2Country }}
            - name: SANS
              value: {{ .Values.certificate.sans }}
            - name: KEYSTORE_PATH
              value: {{ .Values.global.aaf.certServiceClient.envVariables.keystorePath }}
            - name: KEYSTORE_PASSWORD
              value: {{ .Values.global.aaf.certServiceClient.envVariables.keystorePassword }}
            - name: TRUSTSTORE_PATH
              value: {{ .Values.global.aaf.certServiceClient.envVariables.truststorePath }}
            - name: TRUSTSTORE_PASSWORD
              value: {{ .Values.global.aaf.certServiceClient.envVariables.truststorePassword }}
          volumeMounts:
            - mountPath: {{ .Values.certService.outputPath }}
              name: {{ include "common.fullname" . }}-cmpv2-certs
      {{ end -}}
      containers:
        - name: {{ include "common.name" . }}
          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
          resources:
            {{ include "common.resources" . | indent 12 }}
          volumeMounts:
            {{- if .Values.global.cmpv2Enabled }}
            - mountPath: /certificates/external
              name: {{ include "common.fullname" . }}-cmpv2-certs
              readOnly: true
            {{ end -}}
          ...
      volumes:
        {{- if .Values.global.cmpv2Enabled }}
        - name: {{ include "common.fullname" . }}-cmpv2-certs
          emptyDir: {}
        {{ end -}}

CMPv2 server

For testing purpose EJBCA is set up. It is configured with 1 layer CA hierarchy (root CA only).

EJBCA Setup Script



Future enhancements

  1. Keep CMPv2 server details in e.g. ESR
  2. Support configurable output type to output artifacts in desired format: JKS, P12 or PEM - implemented in Guilin release
  3. Certificate update implementation on server and client side
    1. Add to CertService new endpoint to call certificate update in CMPv2 server
    2. Adjust CertService's client to work as sidecar, not init container
      1. CerService's client adjusted to run in loop (e.g. keep watermark and read it in every run)

        1. If certificate is not enrolled - request certificate
        2. If certificate is already enrolled - request certificate update
    3. Application adjusted to reload keystore/truststore in the runtime or if such is not possible, adjusted to restart itself or inform K8s via probes mechanism that restart is required
  4. Adjust logging to ONAP guidance
  5. CMPv2 over HTTPS support
  • No labels