Manual Configurations for Option2

1. UUI Configuration

Configure CST template UUID and Invariant UUID in slicing.properties file of uui-server microservice

In uui-server microservice, modify the following configuration file, /home/UUI/config/slicing.properties

Add or update the parameters slicing.serviceInvariantUuid and parameter slicing.serviceUuid.

The values of these two parameters come from CST template which can be find on SDC page.

Open

2. MSB Configuration

Register so-orchestrationTasks and so-serviceInstances interface to MSB.

Interface registration can be done through portal.

Steps(Portal):

Link: https://{{master server ip}}:30284/iui/microservices/default.html

 1.Select ‘Service Discover’ in the left pane

 2. Click 'Service Register' button.

Open

 3. Input the basic info as the picture shows(also refer to the registration info provided above)

4. Click Add Host button.

    Input IP Address and Port then click the 'SAVE' button. （Use cmd ’kubectl get svc -n onap so‘ to confirm IP and port.）

5.  Input the basic info as the picture shows for so-orchestrationTasks (also refer to the registration info provided above)

6. You should add a  aai-business service for MSB.
Steps:

• Got to msb https://{{master server ip}}:30284/iui/microservices/default.html

• Select "Service Discover" from left panel

• Click "Service Register" button

  • ADD the following info:
    Service Name: aai-business
    Url: /aai/v13/business
    Protocol: REST
    Enable SSL to True
    Version: v13
    Load balancer: round-robin
    Visualranfe: InSystem

  • Add host:
    AAI service ip and port (8443)

• Save all

3. AAI Configuration

Create customer id  : 

curl --user AAI:AAI -X PUT -H "X-FromAppId:AAI" -H  "X-TransactionId:get_aai_subscr" -H "Accept:application/json" -H "Content-Type:application/json" -k -d '{ 

"global-customer-id":"5GCustomer", 

"subscriber-name":"5GCustomer", 

"subscriber-type":"INFRA" 

}' "https://<worker-vm-ip>:30233/aai/v21/business/customers/customer/5GCustomer" 

Create service type:

curl --user AAI:AAI -X PUT -H "X-FromAppId:AAI" -H  "X-TransactionId:get_aai_subscr" -H "Accept:application/json" -H "Content-Type:application/json" -k https://<worker-vm-ip>:30233/aai/v21/business/customers/customer/5GCustomer/service-subscriptions/service-subscription/5G

4. SO

Copy subnetCapability.json to SO-API Handler pod to configure subnet capabilities at run time.

Sample subnetCapability.json

{
"AN_NF": {
"latency": 5,
"maxNumberofUEs": 200,
"maxThroughput": 90,
"termDensity": 40
},
"AN": {
"latency": 20,
"maxNumberofUEs": 100,
"maxThroughput": 150,
"termDensity": 50
},
"CN": {
"latency": 10,
"maxThroughput": 50,
"maxNumberofConns": 100
},
"TN_FH": {
"latency": 10,
"maxThroughput": 90
},
"TN_MH": {
"latency": 5,
"maxThroughput": 90
},
"TN_BH": {
"latency": 10,
"maxThroughput": 100
}
}

You can copy the file to the pod using the following command

SO Database Update

Insert ORCHESTRATION_URI into service_recipe,  SERVICE_MODEL_UUID replaced by CST.ModelId.

Insert ORCHESTRATION_URI into service_recipe,  SERVICE_MODEL_UUID is ServiceProfile.ModelId

5. OOF Configuration - Policy Creation Steps

Refer Optimization Policy Creation Steps for optimization policy creation and deployment steps

Please find the policies for Option2 below, generate the policies outside the OOF pod and push the policies from inside OOF pod, since it has python3 and necessary libraries already installed 

Copy the policy files

NOTE: 

For NST Selection based on latency constraint, please make sure you have updated the latency constraint as property in the design time template of NST as below,

Updated slice/service profile mapping - slicing_config.yaml

HAS-API/HAS-DATA - Add data dictionary 

^{Go to (/opt/has/conductor/conductor/data/plugins/inventory_provider/candidates/slice_profiles_candidate.py) in OOF HAS pod update the following : "max_bandwidth": copy_first, "jitter": sum, "sst": copy_first, "latency": sum, "resource_sharing_level": copy_first, "s_nssai": copy_first, "s_nssai_list": copy_first, "plmn_id_list": copy_first, "plmn_id_List": copy_first, "availability": copy_first, "throughput": min, "reliability": copy_first, "max_number_of_ues": copy_first, "exp_data_rate_ul": copy_first, "exp_data_rate_dl": copy_first, "ue_mobility_level": copy_first, "activity_factor": copy_first, "survival_time": copy_first, "max_number_of_conns": copy_first, "coverage_area_ta_list": copy_first, "max_number_of_pdu_session": copy_first, "max_throughput": copy_first, "perf_req": copy_first, "terminal_density": copy_first update those and restart the container}

NOTE:

• The service name given for creating the policy must match with the service name in the request

• The scope fields in the policies should match with the value in the resourceSharingLevel(non-shared/shared). Do modify the policy accordingly.

• Check the case of the attributes with the OOF request with the attribute map (camel to snake and snake to camel) in config/slicing_config.yaml, if any mismatch found modify the attribute map accordingly.

• You need to restart the OOF docker container once you updated the slicing_config.yaml, you can do it using the following steps,

  • Login to the worker VM where the OOF container is running. You can find the worker node by running (kubectl get pods -n onap -o wide | grep dev-oof)

  • Find the container using docker ps | grep optf-osdf

  • Restart the container using docker restart <container id>

    CPS Configuration:

    Refer CPS Configuration to setup standalone CPS and configuration of OOF and CPS.

6. External RAN NSSMF Simulator

Deployment Guide for External RAN NSSMF Simulator

1. Download:

2. Environment Setup (Optional):

1) The default listening port of RESTful API is 8443, and you can set environment variable RAN_NSSMF_REST_PORT to change it, such as:

2) The default username and password are in RanNssmfSimulator/etc/auth.json, and you can edit the file to change them or add new ones.

3. Install and Run:

There are two options to run the simulator:

Option 1. Directly run it in the current directory:

Option 2. Install it using setuptools, and run it in any directory:

Register to ONAP ESR

Add an esr-thirdparty-sdnc and esr-system-info to ESR:

Where, ip-address is the IP address or hostname which runs the External RAN NSSMF Simulator, port is the listening port of RESTful API of the simulator,

user-name and password are set in config file RanNssmfSimulator/etc/auth.json of the simulator.

7. External CORE NSSMF Simulator

Installation Steps:

 There are two ways to run Core NSSMF simulator. One is to start via jar package(External Core NSSMF Simulator Use Guide) and the other is to start via docker-compose.

Start by docker-compose

This is the package:

1. Extract the downloaded cn-nssmf-simulator-docker-compose.tar.gz

tar xf cn-nssmf-simulator-docker-compose.tar.gz -C .
cd cn-nssmf-simulator-docker-compose

2. modify application.properties

# vi application.properties
server.port=11111
notifyurl=http://192.168.235.25:30472/v1/pm/notification
ftppath=sftp://root:oom@192.168.235.25:22/home/ubuntu/dcae/PM.tar.gz
fixeddelay=900000
#Configure the output files generated in docker.
filepath=/app/dcae
amffilepath=/app/dcae/AMF.xml.gz
upffilepath=/app/dcae/UPF.xml.gz

3. modify docker-compose.yml

# vi docker-compose.yml
version: '3'
services:
cn-simulator-docker-compose:
image: openjdk:8-jre-slim
container_name: cn-simulator-test-1
ports:
- "11111:11111"
restart: always
# mount the cn-nssmf-simulator-docker-compose directory of the host machine to the /app directory of the container
# If you need to modify the simulator's configuration file application.properties later,
# you can directly modify the host's cn-nssmf-simulator-docker-compose/application.properties to synchronize to the container
volumes:
- ./:/app
working_dir: /app
entrypoint: java -jar simulator-0.0.1-SNAPSHOT.jar

4. start up the application by running " docker-compose up"

Register to ONAP ESR

Add an esr-thirdparty-sdnc and esr-system-info to ESR:

Where, ip-address is the IP address or hostname which runs the External RAN NSSMF Simulator, port is the listening port of RESTful API of the simulator.

9. ACTN Simulator

Refer ACTN Simulator User Guide to setup ACTN-simulator or follow the below steps to launch and initialize domain controllers,

Refer Transport Slicing Configuration and Operation Guidance for NextHop details of AN &CN

Step 1. Fetch the simulator docker image

First, pull down the simulator image from public docker hub.

Step 2. Start the simulator container(s)

After compiling the pnc-simulator image locally or fetching the docker image from remote registry, execute the command below to start the container:

For demonstration purposes, two domain controllers are required, in our case we use 18181 as SERVER_PORT for domain1 and 18182 for domain2.

After starting the container, you should be able to verify the running container by:

Step 3. Initialize the simulator(s)

The simulator offers a set of administrative APIs which are designed for initialization and management purposes.

To initialize the simulator for each domain:

For demonstration purposes, two domain controllers are required, both need to be properly launched and initialized. The initialization payloads are attached below.

ESR Registration using AAI ESR Url:

Once a third-party controller is being registered in ONAP, a "Topology Discovery" operation need be triggered and the domain controller will be called in order to retrieve the topology. SDNC then, will store the topology in AAI. Please execute the below curl command for the ESR registration of initialized two domain controllers,

NOTE: Replace <simulator-ip> and <simulator-port> with the IP Address and port of initialized simulators.

esr_registration