Liquibase Docker Compose Testing

Create docker-compose-test.yml in docker/csit directory (policy-docker project)

Only the policy_admin user and the policyadmin database which are related to policy are available at mariadb container creation time.

docker-compose-test.yml

#
# ===========LICENSE_START====================================================
#  Copyright (C) 2020-2021 AT&T Intellectual Property. All rights reserved.
#  Modifications Copyright (C) 2021 Bell Canada. All rights reserved.
# ============================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ============LICENSE_END=====================================================
#
version: '2'
services:
   mariadb:
      image: nexus3.onap.org:10001/mariadb:10.5.8
      container_name: mariadb
      hostname: mariadb
      command: ['--lower-case-table-names=1', '--wait_timeout=28800']
      env_file: config/db/db.conf
      volumes:
         - ./config/db:/docker-entrypoint-initdb.d:ro
      expose:
       - 3306
   liquibase:
      image: liquibase/liquibase
      container_name: liquibase
      depends_on:
       - mariadb
      hostname: liquibase
      env_file: config/db/db.conf
      environment:
        MYSQL_DB: policyadmin
      volumes:
         - ./config/db:/liquibase/changelog
         - ./liquibase_policy_init.sh:/liquibase/liquibase_policy_init.sh:ro
         - ./nc.sh:/liquibase/nc.sh:ro
         - ./wait_for_port.sh:/liquibase/wait_for_port.sh:ro
      entrypoint: ./wait_for_port.sh
      command: [
              '-c',
                './liquibase_policy_init.sh',
                'mariadb', '3306'
               ]

Add nc.sh (check_tcp_port.sh uses the nc command which is not available in the liquibase image)

nc.sh

#!/bin/bash
# ============LICENSE_START====================================================
#  Copyright (C) 2021. Nordix Foundation. All rights reserved.
# =============================================================================
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# SPDX-License-Identifier: Apache-2.0
# ============LICENSE_END======================================================

if [ $# -lt 2 ]; then
    echo "nc.sh: hostname port" >&2
    exit 1
fi

host=$1
port=$2


(echo -n > /dev/tcp/$host/$port) >/dev/null 2>&1
result=$?

if [ $result -eq 0 ]; then
    echo "Connection to $host $port port [tcp/mysql] succeeded!"
    exit 0
else
    echo "nc: connect to $host port $port (tcp) failed: Connection refused"
    exit 1
fi

Update wait_for_port.sh

wait_for_port.sh

    echo "Waiting for $host port $port..."
    if [ -x ./nc.sh ]; then
        timeout $tmout sh -c 'until ./nc.sh "$host" "$port"; do echo -n ".";
        sleep 1; done'
    else
        timeout $tmout sh -c 'until nc -vz "$host" "$port"; do echo -n ".";
        sleep 1; done'
    fi
    rc=$?

Add liquibase_policy_init.sh

liquibase_policy_init.sh

Add dbchangelog-master.yaml and dbchangelog.mariadb.yaml to config/db

dbchangelog-master.yaml

Run docker-compose -f docker-compose-test.yml up --build

Creating network "csit_default" with the default driver
Creating mariadb ... done
Creating liquibase ... done
Attaching to mariadb, liquibase
liquibase | Waiting for mariadb port 3306...
mariadb | 2021-06-04 12:15:55+00:00 [Note] [Entrypoint]: Entrypoint script for MySQL Server 1:10.5.8+maria~focal started.
mariadb | 2021-06-04 12:15:56+00:00 [Note] [Entrypoint]: Switching to dedicated user 'mysql'
mariadb | 2021-06-04 12:15:56+00:00 [Note] [Entrypoint]: Entrypoint script for MySQL Server 1:10.5.8+maria~focal started.
mariadb | 2021-06-04 12:15:56+00:00 [Note] [Entrypoint]: Initializing database files
liquibase | nc: connect to mariadb port 3306 (tcp) failed: Connection refused
liquibase | .nc: connect to mariadb port 3306 (tcp) failed: Connection refused
mariadb |
mariadb |
mariadb | PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !
mariadb | To do so, start the server, then issue the following commands:
mariadb |
mariadb | '/usr/bin/mysqladmin' -u root password 'new-password'
mariadb | '/usr/bin/mysqladmin' -u root -h password 'new-password'
mariadb |
mariadb | Alternatively you can run:
mariadb | '/usr/bin/mysql_secure_installation'
mariadb |
mariadb | which will also give you the option of removing the test
mariadb | databases and anonymous user created by default. This is
mariadb | strongly recommended for production servers.
mariadb |
mariadb | See the MariaDB Knowledgebase at https://mariadb.com/kb or the
mariadb | MySQL manual for more instructions.
mariadb |
mariadb | Please report any problems at https://mariadb.org/jira
mariadb |
mariadb | The latest information about MariaDB is available at https://mariadb.org/.
mariadb | You can find additional information about the MySQL part at:
mariadb | https://dev.mysql.com
mariadb | Consider joining MariaDB's strong and vibrant community:
mariadb | https://mariadb.org/get-involved/
mariadb |
mariadb | 2021-06-04 12:15:57+00:00 [Note] [Entrypoint]: Database files initialized
mariadb | 2021-06-04 12:15:57+00:00 [Note] [Entrypoint]: Starting temporary server
mariadb | 2021-06-04 12:15:57+00:00 [Note] [Entrypoint]: Waiting for server startup
mariadb | 2021-06-04 12:15:58 0 [Note] mysqld (mysqld 10.5.8-MariaDB-1:10.5.8+maria~focal) starting as process 114 ...
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Using Linux native AIO
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Uses event mutexes
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Compressed tables use zlib 1.2.11
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Number of pools: 1
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Using crc32 + pclmulqdq instructions
mariadb | 2021-06-04 12:15:58 0 [Note] mysqld: O_TMPFILE is not supported on /tmp (disabling future attempts)
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Initializing buffer pool, total size = 134217728, chunk size = 134217728
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Completed initialization of buffer pool
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority().
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: 128 rollback segments are active.
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Creating shared tablespace for temporary tables
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Setting file './ibtmp1' size to 12 MB. Physically writing the file full; Please wait ...
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: File './ibtmp1' size is now 12 MB.
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: 10.5.8 started; log sequence number 45118; transaction id 20
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Loading buffer pool(s) from /var/lib/mysql/ib_buffer_pool
mariadb | 2021-06-04 12:15:58 0 [Note] Plugin 'FEEDBACK' is disabled.
mariadb | 2021-06-04 12:15:58 0 [Note] InnoDB: Buffer pool(s) load completed at 210604 12:15:58
mariadb | 2021-06-04 12:15:58 0 [Warning] 'user' entry 'root@mariadb' ignored in --skip-name-resolve mode.
mariadb | 2021-06-04 12:15:58 0 [Warning] 'proxies_priv' entry '@% root@mariadb' ignored in --skip-name-resolve mode.
mariadb | 2021-06-04 12:15:58 0 [Note] Reading of all Master_info entries succeeded
mariadb | 2021-06-04 12:15:58 0 [Note] Added new Master_info '' to hash table
mariadb | 2021-06-04 12:15:58 0 [Note] mysqld: ready for connections.
mariadb | Version: '10.5.8-MariaDB-1:10.5.8+maria~focal' socket: '/run/mysqld/mysqld.sock' port: 0 mariadb.org binary distribution
liquibase | .nc: connect to mariadb port 3306 (tcp) failed: Connection refused
mariadb | 2021-06-04 12:15:58+00:00 [Note] [Entrypoint]: Temporary server started.
mariadb | Warning: Unable to load '/usr/share/zoneinfo/leap-seconds.list' as time zone. Skipping it.
mariadb | Warning: Unable to load '/usr/share/zoneinfo/leapseconds' as time zone. Skipping it.
liquibase | .nc: connect to mariadb port 3306 (tcp) failed: Connection refused
liquibase | .nc: connect to mariadb port 3306 (tcp) failed: Connection refused
mariadb | Warning: Unable to load '/usr/share/zoneinfo/tzdata.zi' as time zone. Skipping it.
mariadb | 2021-06-04 12:16:01 5 [Warning] 'proxies_priv' entry '@% root@mariadb' ignored in --skip-name-resolve mode.
mariadb | 2021-06-04 12:16:01+00:00 [Note] [Entrypoint]: Creating user policy_user
mariadb |
mariadb |
mariadb | 2021-06-04 12:16:01+00:00 [Warn] [Entrypoint]: /usr/local/bin/docker-entrypoint.sh: ignoring /docker-entrypoint-initdb.d/db.conf
mariadb | 2021-06-04 12:16:01+00:00 [Note] [Entrypoint]: /usr/local/bin/docker-entrypoint.sh: running /docker-entrypoint-initdb.d/db.sh
mariadb | #!/bin/bash -xv
mariadb | # Copyright 2019,2021 AT&T Intellectual Property. All rights reserved
mariadb | #
mariadb | # Licensed under the Apache License, Version 2.0 (the "License");
mariadb | # you may not use this file except in compliance with the License.
mariadb | # You may obtain a copy of the License at
mariadb | #
mariadb | # http://www.apache.org/licenses/LICENSE-2.0
mariadb | #
mariadb | # Unless required by applicable law or agreed to in writing, software
mariadb | # distributed under the License is distributed on an "AS IS" BASIS,
mariadb | # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
mariadb | # See the License for the specific language governing permissions and
mariadb | # limitations under the License.
mariadb |
mariadb | for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
mariadb | do
mariadb | mysql -uroot -p"${MYSQL_ROOT_PASSWORD}" --execute "CREATE DATABASE IF NOT EXISTS ${db};"
mariadb | mysql -uroot -p"${MYSQL_ROOT_PASSWORD}" --execute "GRANT ALL PRIVILEGES ON \`${db}\`.* TO '${MYSQL_USER}'@'%' ;"
mariadb | done
mariadb | + for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
mariadb | + mysql -uroot -p****** --execute 'CREATE DATABASE IF NOT EXISTS support;'
mariadb | + mysql -uroot -p****** --execute 'GRANT ALL PRIVILEGES ON `support`.* TO '\''policy_user'\''@'\''%'\'' ;'
mariadb | + for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
mariadb | + mysql -uroot -p****** --execute 'CREATE DATABASE IF NOT EXISTS onap_sdk;'
mariadb | + mysql -uroot -p****** --execute 'GRANT ALL PRIVILEGES ON `onap_sdk`.* TO '\''policy_user'\''@'\''%'\'' ;'
mariadb | + for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
mariadb | + mysql -uroot -p****** --execute 'CREATE DATABASE IF NOT EXISTS log;'
mariadb | + mysql -uroot -p****** --execute 'GRANT ALL PRIVILEGES ON `log`.* TO '\''policy_user'\''@'\''%'\'' ;'
mariadb | + for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
mariadb | + mysql -uroot -p****** --execute 'CREATE DATABASE IF NOT EXISTS migration;'
mariadb | + mysql -uroot -p****** --execute 'GRANT ALL PRIVILEGES ON `migration`.* TO '\''policy_user'\''@'\''%'\'' ;'
mariadb | + for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
mariadb | + mysql -uroot -p****** --execute 'CREATE DATABASE IF NOT EXISTS operationshistory10;'
mariadb | + mysql -uroot -p****** --execute 'GRANT ALL PRIVILEGES ON `operationshistory10`.* TO '\''policy_user'\''@'\''%'\'' ;'
mariadb | + for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
mariadb | + mysql -uroot -p****** --execute 'CREATE DATABASE IF NOT EXISTS pooling;'
mariadb | + mysql -uroot -p****** --execute 'GRANT ALL PRIVILEGES ON `pooling`.* TO '\''policy_user'\''@'\''%'\'' ;'
mariadb | + for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
mariadb | + mysql -uroot -p****** --execute 'CREATE DATABASE IF NOT EXISTS policyadmin;'
mariadb | + mysql -uroot -p****** --execute 'GRANT ALL PRIVILEGES ON `policyadmin`.* TO '\''policy_user'\''@'\''%'\'' ;'
mariadb | + for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
mariadb | + mysql -uroot -p****** --execute 'CREATE DATABASE IF NOT EXISTS operationshistory;'
mariadb | + mysql -uroot -p****** --execute 'GRANT ALL PRIVILEGES ON `operationshistory`.* TO '\''policy_user'\''@'\''%'\'' ;'
mariadb |
mariadb | mysql -uroot -p"${MYSQL_ROOT_PASSWORD}" --execute "FLUSH PRIVILEGES;"
mariadb | + mysql -uroot -p****** --execute 'FLUSH PRIVILEGES;'
liquibase | .nc: connect to mariadb port 3306 (tcp) failed: Connection refused
mariadb | 2021-06-04 12:16:01 23 [Warning] 'proxies_priv' entry '@% root@mariadb' ignored in --skip-name-resolve mode.
mariadb |
mariadb |
mariadb | 2021-06-04 12:16:01+00:00 [Warn] [Entrypoint]: /usr/local/bin/docker-entrypoint.sh: ignoring /docker-entrypoint-initdb.d/dbchangelog-master.yaml
mariadb |
mariadb | 2021-06-04 12:16:01+00:00 [Warn] [Entrypoint]: /usr/local/bin/docker-entrypoint.sh: ignoring /docker-entrypoint-initdb.d/dbchangelog.mariadb.yaml
mariadb |
mariadb | 2021-06-04 12:16:01+00:00 [Warn] [Entrypoint]: /usr/local/bin/docker-entrypoint.sh: ignoring /docker-entrypoint-initdb.d/dbchangelog2.mariadb.yaml
mariadb | 2021-06-04 12:16:01+00:00 [Note] [Entrypoint]: Stopping temporary server
mariadb | 2021-06-04 12:16:01 0 [Note] mysqld (initiated by: root[root] @ localhost []): Normal shutdown
mariadb | 2021-06-04 12:16:01 0 [Note] Event Scheduler: Purging the queue. 0 events
mariadb | 2021-06-04 12:16:01 0 [Note] InnoDB: FTS optimize thread exiting.
mariadb | 2021-06-04 12:16:01 0 [Note] InnoDB: Starting shutdown...
mariadb | 2021-06-04 12:16:01 0 [Note] InnoDB: Dumping buffer pool(s) to /var/lib/mysql/ib_buffer_pool
mariadb | 2021-06-04 12:16:01 0 [Note] InnoDB: Buffer pool(s) dump completed at 210604 12:16:01
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Shutdown completed; log sequence number 45130; transaction id 21
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Removed temporary tablespace data file: "ibtmp1"
mariadb | 2021-06-04 12:16:02 0 [Note] mysqld: Shutdown complete
mariadb |
liquibase | .nc: connect to mariadb port 3306 (tcp) failed: Connection refused
mariadb | 2021-06-04 12:16:02+00:00 [Note] [Entrypoint]: Temporary server stopped
mariadb |
mariadb | 2021-06-04 12:16:02+00:00 [Note] [Entrypoint]: MySQL init process done. Ready for start up.
mariadb |
mariadb | 2021-06-04 12:16:02 0 [Note] mysqld (mysqld 10.5.8-MariaDB-1:10.5.8+maria~focal) starting as process 1 ...
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Using Linux native AIO
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Uses event mutexes
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Compressed tables use zlib 1.2.11
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Number of pools: 1
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Using crc32 + pclmulqdq instructions
mariadb | 2021-06-04 12:16:02 0 [Note] mysqld: O_TMPFILE is not supported on /tmp (disabling future attempts)
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Initializing buffer pool, total size = 134217728, chunk size = 134217728
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Completed initialization of buffer pool
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority().
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: 128 rollback segments are active.
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Creating shared tablespace for temporary tables
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Setting file './ibtmp1' size to 12 MB. Physically writing the file full; Please wait ...
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: File './ibtmp1' size is now 12 MB.
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: 10.5.8 started; log sequence number 45130; transaction id 20
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Loading buffer pool(s) from /var/lib/mysql/ib_buffer_pool
mariadb | 2021-06-04 12:16:02 0 [Note] Plugin 'FEEDBACK' is disabled.
mariadb | 2021-06-04 12:16:02 0 [Note] InnoDB: Buffer pool(s) load completed at 210604 12:16:02
mariadb | 2021-06-04 12:16:02 0 [Note] Server socket created on IP: '::'.
mariadb | 2021-06-04 12:16:02 0 [Warning] 'proxies_priv' entry '@% root@mariadb' ignored in --skip-name-resolve mode.
mariadb | 2021-06-04 12:16:02 0 [Note] Reading of all Master_info entries succeeded
mariadb | 2021-06-04 12:16:02 0 [Note] Added new Master_info '' to hash table
mariadb | 2021-06-04 12:16:02 0 [Note] mysqld: ready for connections.
mariadb | Version: '10.5.8-MariaDB-1:10.5.8+maria~focal' socket: '/run/mysqld/mysqld.sock' port: 3306 mariadb.org binary distribution
mariadb | 2021-06-04 12:16:03 3 [Warning] Aborted connection 3 to db: 'unconnected' user: 'unauthenticated' host: '192.168.160.3' (This connection closed normally without authentication)
liquibase | .Connection to mariadb 3306 port [tcp/mysql] succeeded!
liquibase | Liquibase Community 4.3.5 by Datical
liquibase | ####################################################
liquibase | ## _ _ _ _ ##
liquibase | ## | | (_) (_) | ##
liquibase | ## | | _ __ _ _ _ _| |__ __ _ ___ ___ ##
liquibase | ## | | | |/ _` | | | | | '_ \ / _` / __|/ _ \ ##
liquibase | ## | |___| | (_| | |_| | | |_) | (_| \__ \ __/ ##
liquibase | ## \_____/_|\__, |\__,_|_|_.__/ \__,_|___/\___| ##
liquibase | ## | | ##
liquibase | ## |_| ##
liquibase | ## ##
liquibase | ## Get documentation at docs.liquibase.com ##
liquibase | ## Get certified courses at learn.liquibase.com ##
liquibase | ## Free schema change activity reports at ##
liquibase | ## https://hub.liquibase.com ##
liquibase | ## ##
liquibase | ####################################################
liquibase | Starting Liquibase at 12:16:04 (version 4.3.5 #62 built at 2021-04-29 18:31+0000)
liquibase | Skipping auto-registration
liquibase | Liquibase: Update has been successful.
liquibase exited with code 0