DRAFT IF ARC Controller Component Description – Dublin (Copy)

Owned by Chaker Al-Hakim
Last updated: Apr 28, 2020
3 min read

STATUS: Under Construction

SDN-C / App-C:

Note:  ONAP has two application level configuration and lifecycle management modules called SDN-C and App-C. Both provide similar services (application level configuration using NetConf, Chef, Ansible, RestConf, etc.) and life cycle management functions (e.g. Stop, resume, health check, etc.).  They share common code from CCSDK repo.  However, there are some differences between these two modules (SDN-C uses CDS only for onboarding and configuration / LCM flow design, whereas App-C uses CDT for the same function).  SDN-C has been used mainly for Layer1-3 network elements and App-C is being used for Layer4-7 network functions.  This is a very loose distinction and we expect that over time we will get better alignment and have common repository for controller code supporting application level configuration and lifecycle management of all network elements (physical or virtual, layer 1-7).  Because of these overlaps, we have documented SDN-C and App-C together.

1 High Level Component Definition and Architectural Relationships 





ONAP Controller Family (SDN-C / App-C) configures and maintains the health ofL1-7 Network Function (VNF, PNF, CNFs) and network services throughout their lifecycle

  • Configure Network Functions (VNF/PNF)

  • Provides programmable network application management platform:

  •  

    • Behavior patterns programmed via models and policies

    • Standards based models &protocols for multi-vendor implementation

    • Extensible SB adapters such as Netconf, Ansible, Rest API, etc.

    • Operational control, version management, software updates, etc.

  • Local source of truth

  •  

    • Manages inventory within its scope

    • Manages and stores state of NFs

    • Supports Configuration Audits

2. SDN-C API definitions

Controller provides the following interfaces:

Interface Name

Interface Definition

 Interface Capabilities

Interface Name

Interface Definition

 Interface Capabilities

CONE-1

Operations Interface

An interface to request for Lifecycle management operations on network resources

CONE-2

OSS Interface

An interface to request for Lifecycle management operations on network resources

CONE-3

Service Order Interface

 An interface to request for Configuration and Lifecycle management operations on network resources

CONE-4

Policy Interface

 An interface to support LCM requests such as Restart, Rebuild, Migrate, Evacuate operations on network resources

The current API documents can be found at:

https://onap.readthedocs.io/en/casablanca/submodules/appc.git/docs/index.html

Controller consumes the following interfaces:

Interface Name

Interface Definition

 Interface Capabilities

Interface Name

Interface Definition

 Interface Capabilities

CONE-5

Rest API

An interface for communication with external systems such as IP management

CONE-6

Resource Chef API

An interface for configuration and Lifecycle management of network resources using Chef protocol

CONE-7

Resource NetConf API

An interface for configuration and Lifecycle management of network resources using NetConf protocol

CONE-8

Resource Ansible API

An interface for configuration and Lifecycle management of network resources using Ansible protocol

SDCE-6

SDC Interface

An interface to receive resource Templates from SDC design catalog

CDSE-1

CDS Interface

An interface to receive resource blueprint from CDS

AAIE-1

Inventory Service Interface

 An interface to create, update, query, and delete resource information and relationships

POE-2a

PDP Query API

 Policy Decision Point query for IP address



3. Component Description:



4. known system limitations

  • Lack of clarity & roles in the controller (which controller does what?)

  • Proliferation of controller instances (many similar yet different controller instances)

  • Divergence of controller implementation (lack of common controller framework)

  • Duplicate and uncoordinated interfaces (lack of uniform common services in southbound interfaces)

  • Controller resiliency and horizontal scaling

5. Used Models

Controllers use the following models:

  • TOSCA

  • YANG

6. System Deployment Architecture



Controller consists of the following containers:

  • CDS-UI container - Design Time

  • SDC-CDS Listener container - Design Time

  • Controller Blueprint MS Container - Design Time

  • Blueprint Processor MS Container - Run Time

  • Command Executor Container - Run Time

  • CDS Database Container - Run Time

  • DG Builder Container - Design Time

  • Admin Portal Container - Run Time

  • SDC Listener Container - Run Time

  • DMAAP Listener Container - Run Time

  • Controller (ODL) Container - Run Time

  • Network Name Gen MS Container - Run Time

  • Ansible Server Container - Run Time

  • MariaDB Galera - Platform Service

  • Netbox - Platform Service 

7. New Release Capabilities

  • Upgrade of ODL to Fluorine SR2

  • Change Management use case support

  • Closed loop use case support

  • Platform maturity advancement (Scalability, Stability, Security, and Performance) 

  • Network discovery enhancements

8. References

  1.  APP-C overview & User Guide: https://docs.onap.org/en/casablanca/guides/onap-developer/developing/index.html#application-controller

  2. SDN-C overview & User Guide:  https://docs.onap.org/en/casablanca/guides/onap-developer/developing/index.html#software-defined-network-controller