PNF Simulator config-assign and config-deploy use case (TODO)

The objective of this page is to give you some basics about setting up ONAP PNF simulator and how to create a simple CDS blueprint model to perform config-assign and config-deploy using CDS REST API interfaces.

Setting up PNF simulator integration project

You can refer to PnP PNF Simulator wiki page to clone the GIT repo and start the required docker containers. We are interested in the sysrepo/sysrepo-netopeer2 docker container to load a simple YANG similar to vFW Packet Generator.

Start PNF simulator docker containers

cd $HOME

git clone https://github.com/onap/integration.git

Start PNF simulator

cd ~/integration/test/mocks/pnfsimulator

./simulator.sh stop

Verify the you have netopeer docker container are up and running. It will be mapped to host port 830

docker ps -a | grep netopeer

Create a simple packet generator YANG model (pg.yang)

module sample-plugin {

yang-version 1;
namespace "urn:opendaylight:params:xml:ns:yang:sample-plugin";
prefix "sample-plugin";

description
"This YANG module defines the generic configuration and
operational data for sample-plugin in VPP";

revision "2016-09-18" {
description "Initial revision of sample-plugin model";
}

container sample-plugin {
uses sample-plugin-params;
description "Configuration data of sample-plugin in Honeycomb";

// READ
// curl -u admin:admin http://localhost:8181/restconf/config/sample-plugin:sample-plugin

// WRITE
// curl http://localhost:8181/restconf/operational/sample-plugin:sample-plugin

}

grouping sample-plugin-params {
container pg-streams {
list pg-stream {

key id;
leaf id {
type string;
}

leaf is-enabled {
type boolean;
}
}
}
}
}

Sample XML data definition for the above model to initialise one single PG stream (pg-data.xml)

<sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin"> <pg-streams> <pg-stream> <id>1</id> <is-enabled>true</is-enabled> </pg-stream> </pg-streams> </sample-plugin>

Copy the above two files into netopeer docker container (pg.yang & pg-data.xml) under /etc/sysrepo/data folder

Execute the following command within netopeer docker container to install the pg.yang model

sysrepoctl -i -g /etc/sysrepo/yang/pg.yang

Connect to netopeer docker container and execute the following commands to initialise the pg.yang model

cd /opt/dev/Netopeer2/cli/build
./netopeer2-cli
> connect --host localhost --login netconf
> edit-config --target running --config=/dev-models/pg-data.xml
> get --filter-xpath /sample-plugin:*

> quit

exit

Now create a simple CDS blue print to update the number of streams using NETCONF.

You can use the attached demo-pnf-bp.zip.zip file to enrich, save, publish and deploy from CDS UI.

You can extract the above BP archive to find the Scripts/dd.json & Scripts/dd.sh. You execute the below command to populate the data dictionary (CDS_UI_PORT = 3000)

bash -x ./dd.sh CDS_UI_PORT ./dd.json

CDS UI you should the all operation successful as shown below

Config-Assign

The assumption is that all the below parameters for config-assign will sent as part of config-assing REST call

Day-0 : config-assign parameters

pnf-ipv4-address, netconf-server-port, netconf-username, netconf-password, stream-count

curl -v --location --request POST 'http://localhost:8000/api/v1/execution-service/process' \
--header 'Content-Type: application/json;charset=UTF-8' \
--header 'Accept: application/json;charset=UTF-8,application/json' \
--header 'Authorization: Basic Y2NzZGthcHBzOmNjc2RrYXBwcw==' \
--header 'Host: cds-blueprints-processor-http:8080' \
--header 'Content-Type: text/json' \
--data-raw '{
"actionIdentifiers": {
"mode": "sync",
"blueprintName": "pnf_config",
"blueprintVersion": "1.0.0",
"actionName": "config-assign"
},
"payload": {
"config-assign-request": {
"template-prefix": [
"pnf", "netconfrpc"
],
"resolution-key": "day-1",
"config-assign-properties": {
"pnf-id": "abcd",
"pnf-ipv4-address": "192.168.122.20",
"netconf-password": "admin",
"netconf-username": "admin",
"netconf-server-port": "830",
"stream-count": "5"
}
}
},
"commonHeader": {
"subRequestId": "143748f9-3cd5-4910-81c9-a4601ff2ea58",
"requestId": "e5eb1f1e-3386-435d-b290-d49d8af8db4c",
"originatorId": "SDNC_DG"
}
}'

Day-1 : config-assign parameters

pnf-ipv4-address, netconf-server-port, netconf-username, netconf-password, stream-count

curl -v --location --request POST 'http://localhost:8000/api/v1/execution-service/process' \
--header 'Content-Type: application/json;charset=UTF-8' \
--header 'Accept: application/json;charset=UTF-8,application/json' \
--header 'Authorization: Basic Y2NzZGthcHBzOmNjc2RrYXBwcw==' \
--header 'Host: cds-blueprints-processor-http:8080' \
--header 'Content-Type: text/json' \
--data-raw '{
"actionIdentifiers": {
"mode": "sync",
"blueprintName": "pnf_config",
"blueprintVersion": "1.0.0",
"actionName": "config-assign"
},
"payload": {
"config-assign-request": {
"template-prefix": [
"pnf", "netconfrpc"
],
"resolution-key": "day-1",
"config-assign-properties": {
"pnf-id": "abcd",
"pnf-ipv4-address": "192.168.122.20",
"netconf-password": "admin",
"netconf-username": "admin",
"netconf-server-port": "830",
"stream-count": "10"
}
}
},
"commonHeader": {
"subRequestId": "143748f9-3cd5-4910-81c9-a4601ff2ea58",
"requestId": "e5eb1f1e-3386-435d-b290-d49d8af8db4c",
"originatorId": "SDNC_DG"
}
}'

On success you should get HTTP status 200 for the above CURL commands. The below is the reference output

* upload completely sent off: 886 out of 886 bytes
< HTTP/1.1 200 OK
< Content-Type: application/json;charset=UTF-8
< Content-Length: 501
< Cache-Control: no-cache, no-store, max-age=0, must-revalidate
< Pragma: no-cache
< Expires: 0
< X-Content-Type-Options: nosniff
< X-Frame-Options: DENY
< X-XSS-Protection: 1 ; mode=block
< Referrer-Policy: no-referrer
<
* Connection #0 to host localhost left intact
{"commonHeader":{"timestamp":"2020-07-21T11:24:33.552Z","originatorId":"SDNC_DG","requestId":"e5eb1f1e-3386-435d-b290-d49d8af8db4c","subRequestId":"143748f9-3cd5-4910-81c9-a4601ff2ea58","flags":null},"actionIdentifiers":{"blueprintName":"pnf_config","blueprintVersion":"1.0.0","actionName":"config-assign","mode":"sync"},"status":{"code":200,"eventType":"EVENT_COMPONENT_EXECUTED","timestamp":"2020-07-21T11:24:33.651Z","errorMessage":null,"message":"success"},"payload":{"config-assign-response":{}}}

Config-Deploy

config-deploy request will send the Day-0 or Day-1 resolution key as part of the REST call.

"resolution-key" : "day-1" (OR) "resolution-key" : "day-2"

config-deploy should retrieve the Day-1 or Day-2 configuration based on the resolution-key and executes the NETCONF command processor Kotlin code

TODO: REST API CURL Command for Day-1 configuration deployment

TODO: REST API CURL Command for Day-2 configuration deployment