TOSCA data types of ASD

tosca.datatypes.asd.extCpdData:
    version: 0.1
    derived_from: tosca.datatypes.Root  
    description: "Describes the datatype for external connection point definition data"
    properties:
      id:
        description: "The identifier of this extCpdData"
        required: true
        type: string
      description:
        description: >
            This property describes for a particular ExtCpd instance 
            what service it exposes.
        required: true
        type: string 
      virtual_link_requirement: 
        description: >
          Refers in an abstract way to the network or multiple networks that 
          the ExtCpd shall be exposed on (ex: OAM, EndUser, backhaul, LI, etc)
        required: true
        type: string       
      network_interface_realization_requirements:
        description: >
          Details container implementation specific requirements on 
          the NetworkAttachmentDefinition
        required: false
        type: tosca.datatypes.asd.networkInterfaceRequirements
      input_param_mappings:
        description: >
          Information on what helm chart input parameters that 
          are required to be configured for this extCpd
        required: false
        type: tosca.datatypes.asd.paramMappings
      resource_mapping:
        description: >
          Kubernetes API resource name for the resource manifest for the service, 
          ingress controller or pod
        required: false
        type: string

tosca.datatypes.asd.networkInterfaceRequirements:
    derived_from: tosca.datatypes.Root  
    version: 0.1
    description: "Describes the datatype for network interface requirements"
    properties:
      trunk_mode:
        description: >
               Information about whether the CP instantiated from this Cp is 
               in Trunk mode (802.1Q or other). When operating in "trunk mode", 
               the Cp is capable of carrying traffic for several VLANs. 
               Absence of this property implies that trunkMode is not configured 
               for the Cp i.e. It is equivalent to boolean value "false".
        required: true
        type: boolean
        default: false
      ipam: 
        description: > 
              Identifies whether application expects IP address assignment to be 
              managed by the cluster infrastructure (CNI IPAM plugin), or 
              configured by orchestrator via for example helm input parameter, 
              or if IP assignment is handled by the application itself.
        required: true
        type: string
        constraints:
          - valid_values: ["infraProvided", "orchestrated", "userManaged"]
        default: "infraProvided"
      interface_type:
        description: > 
            Indicates what type of network interface the application expects.
            Kernel based virtual netdev based on CNIs such as ovs | bridge | 
            macvlan | ipvlan, or PCIe dev directly visible in application 
            namespace with kernel or userspace driver or bonded with the Bond 
            CNI, or userspace-CNI based network interface 
            (requires DPDK-OVS/VPP vSwitch).
          required: true
        type: string
        constraints:
          - valid_values: ["kernel.netdev", "direct.userdriver", "direct.kerneldriver", "direct.bond", "userspace"]
        default: "kernel.netdev"
      interface_option:
        description: > 
            This attribute describes verified realization options for the 
            network interface in question. Currently listed options 
            (virtio and memif) are applicable for the interfaceType “userspace”.
        required: false
        type: list
        entry_schema:
              type: string
              constraints:
                  - valid_values: [“virtio", "memif“]
     interface_redundancy:
        description: > 
             Identifies switch-plane redundancy method the application uses, 
             and that node infrastructure is required to comply with.
             "infraProvided", “left” and “right”: The container sees a 
             single vNIC that a) the infrastructure bonds over both switchplanes 
             or b) that is connected to the network via only left or 
             right the switchplane.
             The other cases are for a mated pair of vnics connecting to 
             same network, but where one vNIC connects
             via left switch plane and the other via right switch plane, 
             and where the application manages the redundancy. 
             "activePassiveBond": the application bonds with move of MAC address. 
             "activeActiveBond“: bonded left/right links must be part of a multi-chassis LAG 
             "activePassiveL3": application will move application IP address between the vNICs.
             "activeActiveL3": the application uses anycast/ECMP.
        required: true
        type: string
        constraints:
          - valid_values: ["infraProvided", "actPassBond", "actActBond", "actPassL3", "actActL3", "Left", "Right"] 
        default: "infraProvided"
      nic_options:
        description: > 
             Identifies for the direct.userdriver interface type, the physical 
             nics the driver is verified to work with.
             Allowed values for nic types must be handled via a registry or be standardized.
        required: false
        type: list
        entry_schema:
              type: string 

tosca.datatypes.asd.paramMappings:
    version: 0.1
    derived_from: tosca.datatypes.Root  
    description: "Describes the datatype for parameter mapping"
    properties:
      loadbalancer_IP:
        description: >
              When present, this attribute specifies the name of the deployment 
              artifact input parameter through which the orchestrator can 
              configure the loadbalancerIP parameter of the K8s service 
              or ingress controller that the ExtCpd represents.
        required: false
        type: string
      external_IPs:
        description: >
              When present, this attribute specifies the name of the deployment 
              artifact input parameter through which the orchestrator can 
              configure the extermalIPs parameter of the K8s service or ingress 
              controller, or the pod network interface annotation, that the 
              ExtCpd represents.
        required: false
        type: list
        entry_schema:
           type: string
      nad_names: 
        description: >
              Specifies, for an extCpdData respesenting a secondary network interface,
              the name(s) of the NetworkAttachmentDefinitions the orchestrator has
              created as base for the network interface the ExtCpd represents. 
        required: false
        type: list
        entry_schema:
           type: string
      nad_namespace: 
        description: >
              Specifies, for an extCpdData respesenting a secondary network interface,
              the namespace where the NetworkAttachmentDefinitions (NADs) are located.
              Attribute may be omitted if the namespace is same as the application 
              namespace.
        required: false
        type: string 

tosca.datatypes.asd.enhancedClusterCapabilities:
    version: 0.1
    derived_from: tosca.datatypes.Root 
    description: "Describes the datatype for parameter mapping"
    properties:
      min_kernel_version:
        description: >
               Describes the minimal required Kernel version, e.g. 4.15.0. 
               Coded as displayed by linux command uname –r
        required: true
        type: string  
      required_kernel_modules:
        description: > 
             Required kernel modules are coded as listed by linux lsmod command, 
             e.g. ip6_tables, cryptd, nf_nat etc.​ 
        required: false
        type: list
        entry_schema:
              type: string 
      conflicting_kernel_modules:
        description: > 
             Kernel modules, which must not be present in the target environment. 
             The kernel modules are coded as listed by linux lsmod command, 
             e.g., ip6_tables, cryptd, nf_nat etc. 
             Example: Linux kernel SCTP module, which would conflict with use of 
             proprietary user space SCTP stack provided by the application.​ 
        required: false
        type: list
        entry_schema:
              type: string   
      required_custom_resources:
        description: >               
            List the custom resource kinds required to be supported in the target 
            environment. The list shall include those custom resource kinds which 
            are not delivered with the application.			 
        required: false
        type: list
        entry_schema:
              type: tosca.datatypes.asd.customResourceRequirement
      cluster_labels:
        description: > 
             This attribute allows to associate arbitrary labels to clusters.
             These can indicate special infrastructure capabilities (e.g., NW acceleration, 
             GPU compute, etc.). The intent of these labels is to serve as a set of 
             values that can help in application placement decisions. 
             clusterLabels follow the Kubernetes label key-value-nomenclature 
             (https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/). 
             It is recommended that labels follow a standardized meaning e.g. for node 
             features (https://kubernetes-sigs.github.io/node-feature-discovery/v0.9/get-started/features.html#table-of-contents).
             Example: 
             ClusterLabels
               - feature.node.kubernetes.io/cpu-cpuid.AESNI: true               
        required: false
        type: list
        entry_schema:
              type: string
      required_plugin:
        description: a list of the name of the required K8s plugin
        required: false
        type: list
        entry_schema:
              type: tosca.datatypes.asd.requiredPlugin

tosca.datatypes.asd.customResourceRequirement: 
       version: 0.1
       derived_from: tosca.datatypes.Root 
       description: > 
           kind: "Redis", apiVersion: "kubedb.com/v1alpha1" 
       properties: 
           kind:
              description: "the name of the custom resource requirement"
              type: string 
              required: true 
           api_version:
              description: "the api version of the custom resource requirement"
              type: string 
              required: true 

tosca.datatypes.asd.requiredPlugin: 
       version: 0.1
       derived_from: tosca.datatypes.Root 
       description: "the required K8s plugin"
       properties: 
           name:
              description: "the name of the required K8s plugin"
              type: string 
              required: true 
           version:
             description: "the version of the required K8s plugin"
             type: string 
             required: true