CCSDK-2752: Examine DPS SPI and propose CPS Spike

Interface QueryService 

Service responsible for dealing with query related features of Data Persistence Service.

• execute

Executes the query and presents the result as an iterator of objects queried for. Will always return the full object from the database.

• executeProjection

Executes the query and presents the result as a list. Returns a list, the type of which is based on the Projection used.

• executeProjection

Executes the query and presents the result as a list. Will return a projection with an List on which the type of data will be an Object array. 

• executeCount

Executes the query and presents the result as a count of how many instances are matched against the query.
Note: because of database limitations, at this moment this method is not optimized.

• executeDeletion

Deletes all matching objects and where appropriate deletes any related managed object.
Note: because of database limitations, at this moment this method is not optimized.

Interface QueryPathService

Service responsible for dealing with path query related features of Data Persistence Service.

• getTargetObjects

Executes the query ands gets the result as an iterable of 'full' objects queried. 

• projectResults

Project the results from points in the query path. Projections allow the user project single data elements from the objects which were found along a query path - these elements can be modelled (i.e. persistence object attributes) or non-modelled (i.e. object fields).

Defines a sorting order which can be applied to a query to order its result set.

• getDpsSortingElement

Retrieves the sorting element used in this sorting order.

• getOrderingDirection

Retrieves the sorting direction used in this sorting order.

• getType

Retrieves the sorting type used in this sorting order.

Interface DpsTypeQuery

Specifies common functionality used by type queries.

• getNamespace

Get the namespace of the type of object the type query is to target.

• getType

Get the type of object that the type query is to target.

Interface DpsQuery

Specifies methods that are used internally by DPS but are not to be exposed externally to clients.

• getAllSortingOrders

Gets the sorting orders used in this query criteria.

• getQueryCategory

Gets the category of query that this query criteria represents.

• getRestriction

Gets the restriction used in these query criteria, including any DPS internal restrictions added in addition to those set by the user.

• isConversionNeeded

Indicates if conversion is needed for the returned results.

• isDepthFirst

Are the query results to be ordered in a depth first manner?

Interface DpsContainmentQuery

Contains common functionality used by containment queries.

• getBaseMoFdn

Retrieve the FDN of the base MO of this query. The base MO is the managed object under which we will look for MOs matching the other criteria of this query.

Interface DpsObjectQuery

Specifies methods that are used internally by DPS but are not to be exposed externally to clients.

• isTargetTypeHierarchical

Is the target type hierarchical, i.e. is it able to form containment relationships.

 Interface DpsTypeContainmentQuery

Aggregates common functionality to type queries and containment queries.

Inherits methods from

• DpsQuery
• DpsObjectQuery
• DpsContainmentQuery
• DpsTypeQuery

Class AttributeInModelRestriction

Restriction to filter instances of specific versions (model version) only, where the given attribute name is defined.

• negate

Method that is inverting the given restriction

Returns - newly created restriction that is a negation of the base restriction

• getRestrictionType

Indicates the type of restriction type that this restriction represents.

• getAttributeName

Is the restriction negated?

Class AttributePathRestriction

A restriction to compare modeled attributes against path values.

• negate
• getRestrictionType
• getAttribute
• toString

Class AttributeRestriction

Simple restriction involving attribute values.

• getRestrictionType

Class BetweenRestriction

Class to resolve between and not between restrictions.

• negate
• getRestrictionType
• getAttributeName
• getLowerAttributeValue
• getHigherAttributeValue
• isNegated
• toString

Class ContainmentRestriction

Creates a containment restriction applicable for change logs (e.g. get change logs for all managed objects under supplied FDN of MIB root)

• negate
• getRestrictionType
• getStringToMatch

Class DescendantsRestriction

Class to resolve descendants and not descendants restrictions.

• negate
• getRestrictionType
• getDistance
• getDescendantsScope
• isNegated

Interface DpsRestriction

DPS Internal contract for Restriction. All restrictions implementation of DPS should implement DpsRestriction instead of Restriction.

• negate
• getRestrictionType
• isCdtRestriction
• canUseWithOrRestrictions

Class HasMemberRestriction

Creates a HasMember restriction applicable for group entities (e.g. get groups that have a persistence object as member)

• HasMemberRestriction
• negate
• getRestrictionType
• getAttributeName
• getMemberValue

Class InRestriction

Class that creates an IN restriction type, restricting an attribute to a list of values.

• negate
• getRestrictionType
• getAttributeName
• getAllowedValues
• isNegated
• toString
• getString

Class InternalRestriction

Creates an internal restriction applicable for group entities.

• getRestrictionType

Class ListMemberRestriction

A restriction which verifies if a list attribute has members matching specific restrictions.

• matchAllMembers
• negate
• getRestrictionType
• toString

Class ListRestriction

Common functionality of a List restriction.

• getListAttributeName
• getRestrictionToApply
• isNegated

Class LogicalRestriction

Implement logical restriction (AND/OR) and the negation of this logical restriction.

• negate
• getRestrictionType
• getRestrictionList
• getLogicalOperator
• isNegated
• toString

Class NullValueRestriction

Implementation of the null value restriction and not null value restriction.

• negate
• getRestrictionType
• getAttributeName
• isNegated
• toString

Class ObjectFieldBetweenRestriction

Class to resolve between and not between restrictions for ObjectFields.

• getRestrictionType
• getObjectField

Gets the object field that the restriction applies to.

• toString

Class ObjectFieldInRestriction

Class that creates an IN Restriction type, restricting a Object Field to a list of values.

• getRestrictionType
• getObjectField
• toString

Class ObjectFieldPartialMatchRestriction

Implementation of the partial match restriction and not match restriction.

• getRestrictionType
• getObjectField
• toString

Class ObjectFieldPathRestriction

A restriction to compare object fields against path values.

• negate

• getRestrictionType
• getObjectField
• toString

Interface ObjectFieldRestriction

A restriction that applies to an object field as opposed to a modelled field.

• getObjectField

Class ObjectFieldRetriever

Some object field restrictions serialized as part of a saved query by earlier versions of the relevant restriction class may be missing the object field when deserialized. This utility class allows the missing object field to be determined from the 'attributeName' that will have been stored instead.

TODO This workaround can be removed once we have given teams time to recreate any object field saved queries they may have.

• retrieve

Class ObjectFieldSimpleRestriction

Creates a simple restriction (e.g. compare one field to one value) for object fields.

• getRestrictionType
• getObjectField
• toString

Class PartialMatchRestriction

Implementation of the partial match restriction and not match restriction.

• negate

• getRestrictionType

• getMatchConditionType

• getAttributeName

• isNegated

• getStringToMatch

• toString

Class PathRestriction

Base class for path restrictions.

• getValueToMatch
• getOperator
• getString

Class RedundantRestriction

Abstract class to add property to check for redundant restriction in query.

• isRedundant

Gets the flag value of a query, which is using only one, AND-ed redundant restriction or not.

• setRedundant

Sets a flag of a query, which is using only one, AND-ed redundant restriction or not.

Class SimpleRestriction

Creates a simple restriction (e.g. compare one field to one value).

• negate

• getAttributeName

• getAttributeValue

• getSimpleExpressionOperator

• toString

Interface PersistenceLayerPersistenceObject

Exposes functionality only available on the persistence layer objects.

• setVersion

Sets the new version of this persistence object.

• removeAllAssociations

Remove all associations of this persistence object.

Interface PersistenceLayerManagedObject

Exposes functionality only available on the persistence layer objects.

• loadAllChildrenIntoMemory

Used to pre-load children from the database into memory. This method is provided to optimise use cases which will be doing multiple calls to ManagedObject.getChild(String) - it pre-loads all children from the database so that subsequent calls to ManagedObject.getChild(String) will not need round trips to the database.

Class MinimalObjectData

Provides the basic information needed to access an object.

• getDbId

Get the native database ID of the object.

• getType

Get the type of the object.

• getVersion

Get the version of the object.

• equals

• hashCode

Interface DecoratedPersistenceObject

• getNativeDbId

Get the native database identity of the database object backing this persistence object.

Use of this must be done with great care, as it will vary in its behaviour with respect to consistency, volatility, etc. depending on the database being used.

It should never be exposed to applications and is for use within the DPS layer only.

• getBucketName

Gets the data bucket name to which this persistence object belongs.

• getPersistenceLayerObject

Gets the persistence layer object without any layers of decoration.

If the innermost object is not a persistence layer object then a suitable exception will be thrown.

• getDecoratedObject

Gets the object being decorated by the layer of decoration specified.

• checkUserSuppliedAttributesAtCreation

Passes the attributes supplied by the user for a new persistence object so that they may be verified as required.

This method will be invoked when creating a new persistence object but should not be used to set the attribute values, that is the purpose of initializeAttributes(java.util.Map<java.lang.String, java.lang.Object>).

The purpose of this method is to allow decorators perform actions on the specific attributes supplied by the user, as opposed to the final set of attributes to be applied on the new object, which may contain merged in default values.

The implementation of this method may not modify the supplied attribute map as they are passed through the layers of decorators. And if the original map is required for later use it should be copied as it may get changed subsequently when initializeAttributes(java.util.Map<java.lang.String, java.lang.Object>) is called.

• initializeAttributes

Initializes the attributes for a new persistence object. This method should be invoked when creating a new persistence object rather than using setAttributes() as it will have different behavior, namely:

1. it verifies all mandatory attributes have been supplied

2. it initializes all non-supplied attributes to their default value where relevant

3. no notifications will be sent as a result of this method being called

The implementation of this method may modify the supplied attribute map as they are passed through the layers of decorators.

• removeBackpointer

Removes backpointer from this persistence object to the persistence object which is referencing it by uni-directional with backpointer association.

• setBackpointer

Sets backpointer from this persistence object to the persistence object which is referencing it by uni-directional with backpointer association.

• getBackpointerAssociations

Retrieves referencing persistence objects for backpointer names for all uni-directional with backpointer associations referencing this persistence object.

• getAttributesSpecificallySet

Gets the values for the attributes which have been specifically set on this object.

This includes attributes which:

1. were supplied at creation of the object or

2. had default values applied during creation or

3. were specifically set after creation by invoking one of the setAttribute(s) methods.

Note that an attribute may have been specifically set to null so the values returned in the map may contain nulls.

• isAttributeSet

Determines if the supplied attribute has been specifically set (includes attributes which were set to null).

• getPrimaryTypeSpecification

Gets the primary type specification for this object.

• getChangeIdentifier

Gets change identifier for this persistence object.

• getAttributeNames

Gets all of the attribute names available in this persistence object.

• unsetAttributes

Unsets the values of the supplied attributes.

Class BasicManagedObjectData

Used to efficiently transfer basic information about a Managed Object - without the full Managed Object and without the bloat of the existing Data Transfer Objects (DTOs).

• getFdn
• getNamespace
• getType
• getName
• getVersion
• getPoId
• equals
• hashCode

Interface DecoratedManagedObject

Extends the public managed object interface with methods that are used internally by DPS but are not to be exposed externally to clients.

• getRdn

Get the RDN of the managed object.

• getChildrenCardinality

Returns the existing amount of the managed object of the type referenced by type namespace and name.

• setActiveChoiceCase

Sets the active choice case for the given choice.

• getActiveChoiceCase

Retrieves the active choice case for the given choice.

• getChildrenByType

Retrieves all the children managed object of a given type.

Class AssociationAlreadyDefinedException

Exception thrown when the user tries to create an association that already exists.

• AssociationAlreadyDefinedException

Class ChildAlreadyDefinedException

Exception thrown when a new child object is attempted to be created under a parent which already has a child with that type and name.

• ChildAlreadyDefinedException

• GroupAlreadyDefinedException

Class GroupNotAccessibleException

• GroupNotAccessibleException

An exception thrown when a group requested from DPS method does not exist.

• GroupNotFoundException

Interface DataPersistencyService

Responsible for accessing and manipulating data using the chosen database solution

• storeJsonStructure

Store the JSON structure in the database.

• getJsonById

Get the JSON structure from the database using the entity identifier.

• deleteJsonById

Delete the JSON structure from the database using the entity identifier.

Interface ModelPersistencyService

Responsible for accessing and manipulating module data using the chosen database solution

• storeModule

Store the module from a yang model in the database.