Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 103 Next »


Introduction

The PNF Registration and Re-registration Notification is generated whenever the a CPE is plugged into the network either for the first time (registration) or whenever the CPE is plugged into a different interface of an access node in the network (re-registration).

Upon reception of the notification within ONAP by a DCAE collector, the notification is mapped into a VES event and placed on the DMaaP bus for processing by the DCAE/PRH uS. 

BBS Flows Cross Reference

The PNF Registration notification is used within the following use case scenarios:

PNF Registration Flow

The PNF Registration Flow is documented here for the BBS use case.

PNF Re-registration Flow

Figure 1. BBS PNF Registration and Re-registration Notification Flow Diagram

Here  are the flow by steps (WIP):

10) Access SDN M&C reports the PNF registration event to DCAE/PRH

    1. This notification may be sent to the Restconf VES collector for translation and mapping into the PNF registration VES event as described here.

20) DCAE/PRH then processes the PNF registration event logic where PRH determines if the event is a registration or re-registration event. 

    1. The determination if this event is a registration or registration is documented here. 
    2.  If the ONT/PNF is re-registered,  a PNF_UPDATE event with the additional fields from the VES registration event is produced by PRH onto DMAAP.

30) For the PNF re-registration, the BBS uS

      30.1) consumes PNF_UPDATE event from DMAAP,

      30.2) looks up the service-instance-id by the pnf-name, checks PON UNI attachment point in 'additionalFields' against the attachment point in the PNF.

      30.3) looks up a list of resources to be updated

40) Updates the orchestration status of the CFS service instance in A&AI where an event is then emitted to indicates the resources of the service still need updated

50) SDNC API conducts the service resource re-provisioning upon the ONT location change. The PNF attachment point is updated upon successful provisioning.

60) Updates the orchestration status of the CFS service instance in A&AI where an event is then emitted to indicate the resources of the service have been updated

70) The PNF registration procedure continues from step 9 to completion

DCAE

PNF Registration Event

The BBS Use uses the ONAP pnfRegisration event with additional fields to identify the Access Node UNI to which the CPE is attached.

pnfRegistration Event 
This pnfRegistration Event definition can be found at link:
https://wiki.onap.org/display/DW/5G+-+PNF+Plug+and+Play#id-5G-PNFPlugandPlay-STAGE3-PNFREGISTRATIONVESEVENT

The field definitions use for the BBS Use case for ONT Registration:
	eventName: pnfRegistration_<vendorName>_cpe
	eventId: unique per CPE proxied – incremented as described
	sourceName: <PNF-name/PNF correlation ID>: Format string: <Manufacturer
	OUI>-<SerialNumber> or <Manufacturer OUI>-<Model>-<SerialNumber>
	reportingEntityName:<thirdparty-sdnc-id> from esr request
	additionalFields:
		attachmentPoint: Format: "<oltName>/<oltSlot>/<oltPort>"  <x> denotes element
        accessId: Format: string - This represents the Remote ID within the DHCP Option 82 (Optional)
        c-vlan: Format: int - This represents the Customer VLAN associated with the attachment point (Optional)
        s-vlan: Format: int - The represents the Service VLAN of network interface connected to the attachment point (Optional)


PRH Extension

PNF Re-registration Detection

Refer to PNF Re-registration detection logic handled in 5G use case by extension of PRH micro-service.

PNF for ONT in A&AI

Refer to ONT/PNF definition in ONT modeling. 

PNF unauthenticated.PNF_UPDATE Event

This event is the output of PRH mS when it detects a PNF re-registration event. The event is consumed by the BBS mS.


PNF Update Event 
{ 
 "nf-role":"role",
 "equip-type":"Equipment-Type-1",
 "equip-vendor":"Vendor",
 "equip-model":"E-model-1",
 "serial-number":"SN1234",
 "sw-version":"SW-version-1",
 "correlationId":"PNF-correlation",
   "additionalFields": {
     "attachmentPoint": "olt1-1-1",
     "cvlan": "1005",
     "svlan": "100",
     "remoteId": "some-remote-id"
  }
 }

Nomadic ONT Event/DCAE_CL_OUTPUT Event 

This event triggers Policy engine to call SO API to modify the associated HSIA service.  

DCAE_CL_OUTPUT Event

DCAE Control Loop Event 
{
    "closedLoopEventClient": "DCAE.BBS_mSInstance",
    "policyVersion": "1.0.0.5",
    "policyName": "Nomadic_ONT",
    "policyScope": "service=HSIAService,type=SampleType,closedLoopControlName=CL-NomadicONT-d925ed73-8231-4d02-9545-db4e101f88f8",
    "target_type": "VM",
    "AAI": {
        "service-information.service-instance-id" : "service-instance-id-example",
        "service-information.xxxx-instance-id" : "some-service-instance-id",
    //  ...
    
        "pnf.ontSN" : "ontSN-example",     //...what ever this is
        "pon-uni" : "pon-uni example string",
        "cvlan-id" : "example cvlan-id",
        "svlan-id" : "example svlan-id"
    //  ... what ever more here that need to be retrieved from AAI by BBS mS
    },
    "closedLoopAlarmStart": 1484677482204798,
    "closedLoopEventStatus": "ONSET",
    "closedLoopControlName": "ControlLoop-NomadicONT-fd36-4843-a71a-a8c24c70c88b",
    "version": "1.0.2",
    "target": "vserver.vserver-name",
    "requestID": "97964e10-686e-4790-8c45-bdfa61df770f",
    "from": "DCAE"
}


A&AI Enrichment

The moving ONT associated (through pnfName) service ID is looked up in A&AI and enriched in the A&AI portion of the above DCAE_CL_OUTPUT Event which trigger the operational policy in the operational policy defined below.  

Policy

There are two options to author and execute the Nomadic ONT policy - Apex PDP(Pdp-A) or Drools PDP(Pdp-D).

Apex Engine Triggering

Apex PDP engine is configured to consumes the Nomadic ONT event/DCAE-CL_OUTPUT event from DMAAP and call the SDNC Rest API to take resource re-provisioning actions in the original design in Dublin.  Later on, a workaround approach is taken for the BBS MS to consume the pnfUpdate event produced by PRH and eventually calls SNDC API to proceed the  service associated resource re-provisioning  after certain A&AI query and update. Therefore, the policy engine  configuration and policy definition becomes very simple for the time being.  The only reason for now to keep a no action policy is for the completeness of the control loop so that to the BBS workflow it is actually an open loop so that a CL can be defined and managed by CLAMP through which  DCAE micro-services, such as, Restconf Collector, VES Mapper, PRH as well as the BBS MS can be orchestrated centralized.

PDP-A Configuration (JSON)

Simplified Apex Configuration:

ApexConfig.json 
{       
	"engineServiceParameters": {           
		"name": "MyApexEngine",           
		"version": "0.0.1",           
		"id": 45,           
		"instanceCount": 4,           
		"deploymentPort": 12561,           
		"policyModelFileName": "policy/ONAPvCPEPolicyModel.json",           
		"engineParameters": {                
			"executorParameters": {                   
				"JAVASCRIPT": {                      
					"parameterClassName": "org.onap.policy.apex.plugins.executor.javascript.JavascriptExecutorParameters"                   
					}               
				},               
			"contextParameters": {                   
				"parameterClassName": "org.onap.policy.apex.context.parameters.ContextParameters",                   
				"schemaParameters": {                       
					"Avro": {                           
						"parameterClassName": "org.onap.policy.apex.plugins.context.schema.avro.AvroSchemaHelperParameters"                       
						}                   
					}               
				}           
			}       
		},       
	"eventInputParameters": {            
		"BBSInitConsumer": {                
			"carrierTechnologyParameters": {                    
				"carrierTechnology": "FILE",                   
				"parameters": {                       
					"fileName": "config/BBSInitiationEvent.json"  // ... example event                   
					}                
				},               
			"eventProtocolParameters": {                   
				"eventProtocol": "JSON",                   
				"parameters": {                       
					"nameAlias": "closedLoopControlName",                       
					"versionAlias": "version",                       
					"sourceAlias": "from"                   
					}               
				}           
		},           
		"DCAEConsumer": {               
			"carrierTechnologyParameters": {                   
				"carrierTechnology": "RESTCLIENT",                   
				"parameterClassName": "org.onap.policy.apex.plugins.event.carrier.restclient.RestClientCarrierTechnologyParameters",                   
				"parameters": {                        
					"url": "http://<MSB_IP>:3904/dmaap_port>/unauthenticated.DCAE_CL_OUTPUT/APEX/1?timeout=60000"
                    }               
				},               
			"eventProtocolParameters": {                   
				"eventProtocol": "JSON",                   
				"parameters": {                       
					"nameAlias": "closedLoopControlName",                       
					"versionAlias": "version",                       
					"sourceAlias": "from"                   
					}               
				}           
			}       
		},       
		"eventOutputParameters": {           
			"logProducer": {               
				"carrierTechnologyParameters": {                  
					"carrierTechnology": "FILE",                    
					"parameters": {                        
						"fileName": "/tmp/BBSEventsOut.json"                    
						}               
					},               
					"eventProtocolParameters": {                   
						"eventProtocol": "JSON"               
						}           
					},           
			"SDNCProducer": {               
				"carrierTechnologyParameters": {                   
					"carrierTechnology": "RESTCLIENT",                   
					"parameterClassName": "org.onap.policy.apex.plugins.event.carrier.restclient.RestClientCarrierTechnologyParameters",                   
						"parameters": {                       
							"url": "http://<MSB_IP>:<sdnc_port>/<path-to-HSIA_Service-Resource-Update>"  //...  SDNC REST Call API                   
							}               
						},               
				"eventProtocolParameters": {                   
					"eventProtocol": "JSON"               
					}           
				},           
			"PolicyLogProducer": {               
				"carrierTechnologyParameters": {                   
					"carrierTechnology": "RESTCLIENT",                   
					"parameterClassName": "org.onap.policy.apex.plugins.event.carrier.restclient.RestClientCarrierTechnologyParameters",                   
					"parameters": {                       
						"url": "http://<MSB_IP>:<dmaap_port>/events/POLICY_CL_MGT"                   
						}               
					},               
				"eventProtocolParameters": {                   
					"eventProtocol": "JSON"               
					},              					
				"eventNameFilter": "ControlLoopLogEvent"           
				}       
			}   
		}

}


Apex Policy for Nomadic ONT is created as following. It can be on-board as part of the service Tosca module at design time, distributed to an Apex PDP engine by the policy distribution engine through SDC.  

NomadicONT Policy Model (WIP)

This is the Apex Policy state machine for Nomadic ONT.  An open loop operational policy is going to be defined here to support the completeness of control loop in BBS use case in Dublin.

NomadicONTPolicyModel.apex 
 #-------------------------------------------------------------------------------
 # ============LICENSE_START=======================================================
 #  Copyright (C) 2016-2019 Huawei. All rights reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 # 
 #      http://www.apache.org/licenses/LICENSE-2.0
 # 
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # 
 # SPDX-License-Identifier: Apache-2.0
 # ============LICENSE_END=========================================================
 #-------------------------------------------------------------------------------
 
 model create name=NomadicONTPolicyModel
 
 schema create name=SimpleStringType  flavour=Java schema=java.lang.String
 schema create name=SimpleLongType    flavour=Java schema=java.lang.Long
 schema create name=SimpleBooleanType flavour=Java schema=java.lang.Boolean
 schema create name=UUIDType          flavour=Java schema=java.util.UUID
  
 schema create name=BBSAAIInfoType flavour=Avro schema=LS
 #MACROFILE:"src/main/resources/schemas/BBSAAIInfoType.avsc"
 LE
 
 
 schema create name=SDNCInputBodyType flavour=Avro schema=LS
 #MACROFILE:"src/main/resources/schemas/SDNCInputBodyType.avsc"
 LE
 
 schema create name=SDNCOutputBodyType flavour=Avro schema=LS
 #MACROFILE:"src/main/resources/schemas/SDNCOutputBodyType.avsc"
 LE
 
 schema create name=BBSClosedLoopStatusType flavour=Avro schema=LS
 #MACROFILE:"src/main/resources/schemas/BBSClosedLoopStatusType.avsc"
 LE

 album create name=BBSClosedLoopStatusAlbum scope=policy writable=true schemaName=BBSClosedLoopStatusType
 
 album create name=ControlLoopExecutionIDAlbum scope=policy writable=true schemaName=UUIDType 
  
 album create name=RequestIDVNFIDAlbum scope=policy writable=true schemaName=UUIDType
  
 event create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b version=1.0.2 nameSpace=org.onap.policy.apex.onap.bbs source=DCAE target=APEX
 
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=closedLoopControlName schemaName=SimpleStringType
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=closedLoopAlarmStart  schemaName=SimpleLongType
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=closedLoopAlarmEnd    schemaName=SimpleLongType   optional=true
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=closedLoopEventClient schemaName=SimpleStringType
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=closedLoopEventStatus schemaName=SimpleStringType
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=requestID             schemaName=SimpleStringType
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=target_type           schemaName=SimpleStringType
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=target                schemaName=SimpleStringType
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=from                  schemaName=SimpleStringType
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=version               schemaName=SimpleStringType
 event parameter create name=ControlLoop-BBS-2179b738-fd36-4843-a71a-a8c24c70c88b parName=AAI                   schemaName=BBSAAIInfoType
 
 event create name=BBSStateUpdatedEvent nameSpace=org.onap.policy.apex.onap.bbs source=APEX target=APEX
 
 event parameter create name=BBSStateUpdatedEvent parName=requestID schemaName=UUIDType
 event parameter create name=BBSStateUpdatedEvent parName=vnfID     schemaName=UUIDType
 
 event create name=SDNCResourceUpdate nameSpace=org.onap.policy.apex.onap.bbs source=APEX target=SDNC
 
 event parameter create name=SDNCResourceUpdate parName=body                schemaName=SDNCInputBodyType
 event parameter create name=SDNCResourceUpdate parName=version             schemaName=SimpleStringType
 event parameter create name=SDNCResourceUpdate parName=rpc-name            schemaName=SimpleStringType
 event parameter create name=SDNCResourceUpdate parName=service-instance-id schemaName=SimpleStringType
 event parameter create name=SDNCResourceUpdate parName=pon-uni             schemaName=SimpleStringType
 event parameter create name=SDNCResourceUpdate parName=olt-nni             schemaName=SimpleStringType
 
 event create name=SDNCResourceUpdate nameSpace=org.onap.policy.apex.onap.bbs source=APEX target=SDNC
 
 event parameter create name=SDNCResourceUpdate parName=body                schemaName=SDNCOutputBodyType
 event parameter create name=SDNCResourceUpdate parName=version             schemaName=SimpleStringType
 event parameter create name=SDNCResourceUpdate parName=rpc-name            schemaName=SimpleStringType
 event parameter create name=SDNCResourceUpdate parName=service-instance-id schemaName=SimpleStringType
 event parameter create name=SDNCResourceUpdate parName=pon-uni             schemaName=SimpleStringType
 event parameter create name=SDNCResourceUpdate parName=olt-nni             schemaName=SimpleStringType 
 
 event create name=ControlLoopLogEvent nameSpace=org.onap.policy.apex.onap.bbs source=APEX target=APEX
  
 event parameter create name=ControlLoopLogEvent parName=AAI                   schemaName=VCPEAAIInfoType
 event parameter create name=ControlLoopLogEvent parName=closedLoopControlName schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=closedLoopAlarmStart  schemaName=SimpleLongType
 event parameter create name=ControlLoopLogEvent parName=closedLoopAlarmEnd    schemaName=SimpleLongType   optional=true
 event parameter create name=ControlLoopLogEvent parName=closedLoopEventClient schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=closedLoopEventStatus schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=version               schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=requestID             schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=target_type           schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=target                schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=from                  schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=policyScope           schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=policyName            schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=policyVersion         schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=notification          schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=message               schemaName=SimpleStringType
 event parameter create name=ControlLoopLogEvent parName=notificationTime      schemaName=SimpleStringType
 
 task create name=GetBBSStateTask

 task inputfield create name=GetBBSStateTask fieldName=closedLoopControlName schemaName=SimpleStringType
 task inputfield create name=GetBBSStateTask fieldName=closedLoopAlarmStart  schemaName=SimpleLongType
 task inputfield create name=GetBBSStateTask fieldName=closedLoopAlarmEnd    schemaName=SimpleLongType   optional=true
 task inputfield create name=GetBBSStateTask fieldName=closedLoopEventClient schemaName=SimpleStringType
 task inputfield create name=GetBBSStateTask fieldName=closedLoopEventStatus schemaName=SimpleStringType
 task inputfield create name=GetBBSStateTask fieldName=requestID             schemaName=SimpleStringType
 task inputfield create name=GetBBSStateTask fieldName=target_type           schemaName=SimpleStringType
 task inputfield create name=GetBBSStateTask fieldName=target                schemaName=SimpleStringType
 task inputfield create name=GetBBSStateTask fieldName=from                  schemaName=SimpleStringType
 task inputfield create name=GetBBSStateTask fieldName=version               schemaName=SimpleStringType
 task inputfield create name=GetBBSStateTask fieldName=AAI                   schemaName=BBSAAIInfoType
  
 task contextref create name=GetBBSStateTask albumName=BBSClosedLoopStatusAlbum
  
 task outputfield create name=GetBBSStateTask fieldName=requestID schemaName=UUIDType
 task outputfield create name=GetBBSStateTask fieldName=vnfID     schemaName=UUIDType
  
 task logic create name=GetBBSStateTask logicFlavour=JAVASCRIPT logic=LS
 #MACROFILE:"src/main/resources/logic/GetBBSStateTask.js"
 LE
 
 task create name=SDNCResourceUpdateTask
  
 task inputfield create name=SDNCResourceUpdateTask fieldName=requestID schemaName=UUIDType
 task inputfield create name=SDNCResourceUpdateTask fieldName=vnfID     schemaName=UUIDType
 
 task outputfield create name=SDNCResourceUpdateTask fieldName=body           schemaName=SDNCInputBodyType
 task outputfield create name=SDNCResourceUpdateTask fieldName=version        schemaName=SimpleStringType
 task outputfield create name=SDNCResourceUpdateTask fieldName=rpc-name       schemaName=SimpleStringType
 task outputfield create name=SDNCResourceUpdateTask fieldName=correlation-id schemaName=SimpleStringType
 task outputfield create name=SDNCResourceUpdateTask fieldName=type           schemaName=SimpleStringType
 
 task contextref create name=SDNCResourceUpdateTask albumName=VCPEClosedLoopStatusAlbum
 task contextref create name=SDNCResourceUpdateTask albumName=RequestIDVNFIDAlbum
  
 task logic create name=SDNCResourceUpdateTask logicFlavour=JAVASCRIPT logic=LS
 #MACROFILE:"src/main/resources/logic/SDNCResourceUpdateTask.js"
 LE
 
 task create name=SDNCResourceUpdateRepTask

 task inputfield create name=SDNCResourceUpdateRepTask fieldName=body                schemaName=BBSOutputBodyType
 task inputfield create name=SDNCResourceUpdateRepTask fieldName=version             schemaName=SimpleStringType
 task inputfield create name=SDNCResourceUpdateRepTask fieldName=rpc-name            schemaName=SimpleStringType
 task inputfield create name=SDNCResourceUpdateRepTask fieldName=service-instance-id schemaName=SimpleStringType
 
 
 task outputfield create name=SDNCResourceUpdateRepTask fieldName=requestID   schemaName=UUIDType
 task outputfield create name=SDNCResourceUpdateRepTask fieldName=pon-uni     schemaName=UUIDType

 task contextref create name=SDNCResourceUpdateRepTask albumName=BBSClosedLoopStatusAlbum
 task contextref create name=SDNCResourceUpdateRepTask albumName=RequestIDVNFIDAlbum

 task logic create name=SDNCResourceUpdateRepTask logicFlavour=JAVASCRIPT logic=LS
 #MACROFILE:"src/main/resources/logic/SDNCResourceUpdateRepTask.js"
 LE

 task create name=ControlLoopLogTask
 
 task inputfield create name=ControlLoopLogTask fieldName=requestID schemaName=UUIDType
 task inputfield create name=ControlLoopLogTask fieldName=pon-uni     schemaName=UUIDType
 
 task outputfield create name=ControlLoopLogTask fieldName=AAI                   schemaName=VCPEAAIInfoType
 task outputfield create name=ControlLoopLogTask fieldName=closedLoopControlName schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=closedLoopAlarmStart  schemaName=SimpleLongType
 task outputfield create name=ControlLoopLogTask fieldName=closedLoopAlarmEnd    schemaName=SimpleLongType   optional=true
 task outputfield create name=ControlLoopLogTask fieldName=closedLoopEventClient schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=closedLoopEventStatus schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=requestID             schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=version               schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=target_type           schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=target                schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=from                  schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=policyScope           schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=policyName            schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=policyVersion         schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=notification          schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=message               schemaName=SimpleStringType
 task outputfield create name=ControlLoopLogTask fieldName=notificationTime      schemaName=SimpleStringType
 
 task contextref create name=ControlLoopLogTask albumName=BBSClosedLoopStatusAlbum
 
 task logic create name=ControlLoopLogTask logicFlavour=JAVASCRIPT logic=LS
 #MACROFILE:"src/main/resources/logic/ControlLoopLogTask.js"
 LE
 
 policy create name=ReceiveEventPolicy template=Freestyle firstState=GetBBSState
  
 267 policy state create name=ReceiveEventPolicy stateName=AbatedState triggerName=VCPEStateUpdatedEvent defaultTaskName=ControlLoopLogTask
 268 policy state output create name=ReceiveEventPolicy stateName=AbatedState outputName=AbatedOutput eventName=ControlLoopLogEvent
 269 policy state taskref create name=ReceiveEventPolicy stateName=AbatedState taskName=ControlLoopLogTask outputType=DIRECT outputName=AbatedOutput
 270 
 271 policy state create name=ReceiveEventPolicy stateName=OnsetOrAbatedState triggerName=VCPEStateUpdatedEvent defaultTaskName=AbatedTask
 272 policy state output create name=ReceiveEventPolicy stateName=OnsetOrAbatedState outputName=OnsetOutput eventName=GuardRequestEvent
 273 policy state taskref create name=ReceiveEventPolicy stateName=OnsetOrAbatedState taskName=GuardRequestTask outputType=DIRECT outputName=OnsetOutput
 274 policy state output create name=ReceiveEventPolicy stateName=OnsetOrAbatedState outputName=AbatedOutput eventName=VCPEStateUpdatedEvent nextState=AbatedState
 275 policy state taskref create name=ReceiveEventPolicy stateName=OnsetOrAbatedState taskName=AbatedTask outputType=DIRECT outputName=AbatedOutput
 276 
 277 policy state contextref create name=ReceiveEventPolicy stateName=OnsetOrAbatedState albumName=VCPEClosedLoopStatusAlbum
 278 
 279 policy state selecttasklogic create name=ReceiveEventPolicy stateName=OnsetOrAbatedState logicFlavour=JAVASCRIPT logic=LS
 280 #MACROFILE:"src/main/resources/logic/ReceiveEventPolicyOnsetOrAbatedStateTSL.js"
 281 LE
 282 
 283 policy state create name=ReceiveEventPolicy stateName=GetVCPEState triggerName=ControlLoop-vCPE-85317438-861d-42a9-979e-9d96dc0a9ef1 defaultTaskName=GetVCPEStateTask
 284 policy state output create name=ReceiveEventPolicy stateName=GetVCPEState outputName=GetVCPEStateOutput eventName=VCPEStateUpdatedEvent nextState=OnsetOrAbatedState
 285 policy state taskref create name=ReceiveEventPolicy stateName=GetVCPEState taskName=GetVCPEStateTask outputType=DIRECT outputName=GetVCPEStateOutput
 286 
 287 policy create name=RestartAPPCRequestPolicy template=Freestyle firstState=PolicyGuardResponseState
 288 
 289 policy state create name=RestartAPPCRequestPolicy stateName=DeniedState triggerName=VCPEStateUpdatedEvent defaultTaskName=ControlLoopLogTask
 290 policy state output create name=RestartAPPCRequestPolicy stateName=DeniedState outputName=DeniedOutput eventName=ControlLoopLogEvent
 291 policy state taskref create name=RestartAPPCRequestPolicy stateName=DeniedState taskName=ControlLoopLogTask outputType=DIRECT outputName=DeniedOutput
 292 
 293 policy state create name=RestartAPPCRequestPolicy stateName=PermitOrDenyState triggerName=VCPEStateUpdatedEvent defaultTaskName=DeniedTask
 294 policy state output create name=RestartAPPCRequestPolicy stateName=PermitOrDenyState outputName=PermitOutput eventName=APPCRestartVNFRequestEvent
 295 policy state taskref create name=RestartAPPCRequestPolicy stateName=PermitOrDenyState taskName=APPCRestartVNFRequestTask outputType=DIRECT outputName=PermitOutput
 296 policy state output create name=RestartAPPCRequestPolicy stateName=PermitOrDenyState outputName=DenyOutput eventName=VCPEStateUpdatedEvent nextState=DeniedState
 297 policy state taskref create name=RestartAPPCRequestPolicy stateName=PermitOrDenyState taskName=DeniedTask outputType=DIRECT outputName=DenyOutput
 298 
 299 policy state create name=RestartAPPCRequestPolicy stateName=PolicyGuardResponseState triggerName=GuardResponseEvent defaultTaskName=GuardResponseTask
 300 policy state output create name=RestartAPPCRequestPolicy stateName=PolicyGuardResponseState outputName=GuardResponseOutput eventName=VCPEStateUpdatedEvent nextState=PermitOrDenyState
 301 policy state taskref create name=RestartAPPCRequestPolicy stateName=PolicyGuardResponseState taskName=GuardResponseTask outputType=DIRECT outputName=GuardResponseOutput
 302 
 303 policy state contextref create name=RestartAPPCRequestPolicy stateName=PermitOrDenyState albumName=VCPEClosedLoopStatusAlbum
 304 
 305 policy state selecttasklogic create name=RestartAPPCRequestPolicy stateName=PermitOrDenyState logicFlavour=JAVASCRIPT logic=LS
 306 #MACROFILE:"src/main/resources/logic/RestartAPPCRequestPolicyPermitOrDenyTSL.js"
 307 LE
 308 
 309 policy create name=RestartAPPCResponsePolicy template=Freestyle firstState=RestartAPPCResponseState
 310 
 311 policy state create name=RestartAPPCResponsePolicy stateName=ResponseLogState triggerName=VCPEStateUpdatedEvent defaultTaskName=ControlLoopLogTask
 312 policy state output create name=RestartAPPCResponsePolicy stateName=ResponseLogState outputName=ResponseLogOutput eventName=ControlLoopLogEvent
 313 policy state taskref create name=RestartAPPCResponsePolicy stateName=ResponseLogState taskName=ControlLoopLogTask outputType=DIRECT outputName=ResponseLogOutput
 314 
 315 policy state create name=RestartAPPCResponsePolicy stateName=RestartAPPCResponseState triggerName=APPCRestartVNFResponseEvent defaultTaskName=APPCRestartVNFResponseTask
 316 policy state output create name=RestartAPPCResponsePolicy stateName=RestartAPPCResponseState outputName=APPCRestartVNFResponseOutput eventName=VCPEStateUpdatedEvent nextState=ResponseLogState
 317 policy state taskref create name=RestartAPPCResponsePolicy stateName=RestartAPPCResponseState taskName=APPCRestartVNFResponseTask outputType=DIRECT outputName=APPCRestartVNFResponseOutput
 318 
 319 validate
 320


Logic Artifacts

Nomadic ONT Apex Policy

Schema

Schema Aritifacts

Operational Policy High Level

Operational Policy

A simple open loop operation policy to support the completeness of BBS control loop.

Nomadic ONT Operation Policy 
controlLoop:
  version: 2.0.0
  controlLoopName: ControlLoop-Nomadic-ONT-2179b738-fd36-4843-a71a-a8c24c70c88b
  trigger_policy: unique-policy-id-16-ServiceModify
  timeout: 3600
  abatement: false
    
policies:
  - id: unique-policy-id-16-ResourceUpdate
    name: Resource Update
    description:
    actor: SDNC
    recipe: resourceUpdate
    target:
      type: VM
    retry: 3
    timeout: 1200
    success: final_success
    failure: final_failure
    failure_timeout: final_failure_timeout
    failure_retries: final_failure_retries
    failure_exception: final_failure_exception
    failure_guard: final_failure_guard


SDNC API/Recipe

SDNC API for BBS Nomadic ONT 
# No supported in Dublin for now...

A&AI APIs

A&AI APIs Called Directly By Operational Policy

API for updating the service-instance is the same as before and only this one need to be called twice during ONT Relocation Policy execution. 

Service Status Update 
PUT
/business/customers/customer/{global-customer-id}/service-subscriptions/service-subscription/{service-type}/service-instances/service-instance/{service-instance-id}

A&AI APIs Called Indirectly Through SO/SDNC 

To update the attachment point of the PNF, when the old logical-link object is deleted, it should be automatically removed from the pnf relationship-list, then create a new logical-link object and PUT it into the pnf relationship-list, e.g. as the following

Update PNF 
PUT /network/pnfs/pnf/{pnf-name}/relationship-list/relationship

To update the metadata on the service-instance, use the PUT on the metadatum objects. If there are new objects, then add them to the relationship-list on the cp/pnf/generic-vnf, etc, e.g. as the following

Update service meta data 
PUT /business/customers/customer/{global-customer-id}/service-subscriptions/service-subscription/{service-type}/service-instances/service-instance/{service-instance-id}/metadata/metadatum/{metaname}

PUT
/network/generic-vnfs/generic-vnf/{vnf-id}/relationship-list/relationship

Design Time Artifacts

DCAE-DS

Micro-service Blueprints

MS Blueprints


CLAMP

Control Loop (Micro-service) Orchestration

There are basically 2 ways of CL creation and micro-service orchestration in BBS Nomadic ONT scenario.

  1.  Restconf collector + VES Mapper + PRH + Policy Engine
  2.  VES Collector + PRH + Policy Engine


Notes:

Interestingly,  this is the first case where DCAE/Policy seem playing roles together in a non-closed/loop or service assurance in sense of usage/solution in ONAP domain,  However,  this does not really matter in the sense of micro services since service is a service as long as it provides the functionality that meets the requirements in a solution, An argument could be that Policy engine does not have to be introduced in this case, However, the important functionality for policy engine is to decouple action takers from the trigger pullers and ultimately establish robust policy driving on this platform w/o code change. 

  • No labels