Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

  1. VF-C csar package on-boarding guide
    Note:
    1.1 VF-C R3 support VNF/PNF/NS csar package on-boarding from local csar file.
    1.2 VNF/PNF csar package should be on-boarded first, then NS csar package can be on-boarded.

    The following shows the guide of on-boarding a VNF csar package:
    Step 1. Open the csar package list page, and select the VNF tab.


    Step 2.  Select a local VNF csar file(for example: vnf-vsn.csar) and drag the file to the upload area, then the Start Upload button will become enabled.


    Step 3. Click Start Upload button, the VNF csar file will be uploaded to VF-C.


    Step 4. When the VNF csar file upload successfully, the VNF csar package info will be displayed in the list.
     

    You can also on-board a PNF or NS csar package by click the PNF or NS tab in the csar package list page, then follow the upper four steps.

  2. VF-C csar package distribute guide
    Note:
    2.1  VF-C R3 also support VNF/NS csar package distributing from SDC.
    2.2  VNF csar package should be distributed first, then NS csar package can be distributed.
    2.3  The csar package list page showes both the on-boarded/distributed csar package and the package from SDC.
    2.4  When the package from SDC is distributed, it will be dropped from the list, and the distributed package will be displayed in the list.

    The following shows the guide of distributing a NS csar package:
    Step 1. Select the SDC NS csar package record(vcpe_ns_201811171343) in csar package list package, and click the distribute button, the SDC NS csar package will be distributed to VF-C:
     

    Step 2. When the distribute is completed, the SDC csar record(vcpe_ns_201811171343) is dropped from the list, and the distributed csar info(vcpe) will be displayed in the csar file list:


    You can also distribute a VNF csar package by click the VNF tab in the csar package list page, then follow the upper two steps.

  3. VF-C csar package delete guide
    Note:
    3.1 VF-C R3 support deleting an on-boarded or distributed VNF/PNF/NS csar package.
    3.2 NS csar package should be deleted first, then VNF/PNF csar package can be deleted.

    The following shows the guide of deleting a NS csar package:
    Step 1. Select a NS csar record(vcpe) in NS csar package list page, a confirm message box will pop, click Yes button:


    Step 2. When the csar file(vcpe) is deleted, the vcpe_ns_201811171343(SDC csar) will be displayed in csar list package again.


    You can also delete a VNF or PNF csar package by click the VNF or PNF tab in the csar package list page, then follow the upper two steps.

  4. VF-C NS Instantiate guide
    Note:
    4.1 When an NS package is on-boarded or distributed,  you can start NS Instantiating.

    The following shows the guide of Instantiating NS:
    Step 1. Open the service list page, first select Customer and Service Type, then click Create button:


    Step 2.


    Step 3. First input the NS Name and Description, then select 


  5. VF-C NS heal guide

  6. VF-C NS delete guide


  • No labels