Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

References

Use case overview and impacted components are described in the 5G OOF PCI optimization main wiki page.

1. Architecture

This architecture depicts a standalone PCI micro-service. When this is moved to DCAE, it may undergo some adaptations, for e.g., the interfaces have to be adapted appropriately.


          

1.1. Core Logic

This is composed of a Main Thread and one or more Child Threads. The Main Thread is responsible for spawning and terminating the Child Threads, this is described in the sections below.

1.2. Database

This is a PostgreSQL DB, and is intended to persist information such as the following:

  • PCI-Handler MS Config information (e.g., thresholds, timer values, OOF algorithm name, etc.)
  • Pre-processing results and other related information (e.g., neighbor list)
  • Buffered notifications (i.e., notifications not yet processed at all)
  • State information
  • Association between pnf-name and CellId

1.3. DMaaP Client

This is responsible for registering with the DMaaP client for the DMaaP notifications from SDN-R, and to Policy.

2. Core Logic components and Pre-processing algorithm

Note: The pre-processing logic may not be 100% fool-proof as well as the most efficient one. An attempt has been made to balance the usefulness for a PoC in Casablanca timeframe versus the complexity of handling all possible scenarios.

2.1. Main Thread

The state transition diagram is illustrated below:

The main actions in the various states are listed below:

2.1.1. Initialization

In this state, the following actions are performed:

  • Fetch config policy from Policy module (REST call) and configure the MS (thresholds, timers, etc.)
  • Initialize Database, buffers, etc.
  • Trigger DMaaP thread for registration of DMaaP topics (SDN-R and Policy interfaces)

2.1.2. Config Policy Update

Upon receipt of a websocket notification from Policy module, fetch updated config policy via REST call (get_config)

2.1.3. SDN-R Notification Handling

Check if notification has to be processed or buffered as follows:

  1. Fetch the PCI_optimization requests (from DB) for which OOF has been triggered, and corresponding ‘cluster’ details
  2. For each ‘cluster’ for which OOF has been triggered, check if the Nodeid of the Cell Ci or at least one cell in its NbrList matches with any cell in the ‘cluster’
  3. If there is a match, then the request has to be buffered, along with the cluster indication (cluster id), else the notification has to be processed.
  4. If ‘notification has to be processed’, transition to Child Thread triggering state, else transition to Buffer notification state.

2.1.4. Child Thread triggering

  1. Fetch the available clusters (corresponding to the active child threads) from DB.

  2. For each cluster:

    if the Cell Ci and/or its neighbors Nbr_1i to Nbr_Ki are present in the cluster

    then

    • Map the notification to the child thread handling the cluster (i.e., consider this cell also to be part of the cluster)

    • child_thread_mapped = true
    • Exit the loop of scanning each cluster

   fi

3. If child_thread_mapped = false, then instantiate a new cluster (i.e., this cell is part of a new cluster).

2.1.5. Buffer notification

Buffer the notification (along with the cluster id) in the DB.

2.1.6. OOF Response Handling

Upon invocation of API by OOF for PCI result pass it to the relevant child thread(s) (by request id <-> thread mapping). Store the OOF results in database along with the timestamp.

2.1.7. Child thread status update handling (PCI recommendations sent to Policy)

Upon trigger from Child thread that OOF results have been sent to Policy (as a DMaaP message), check if there are any buffered notifications to be handled for the cluster handled by the Child thread.

If there are any such buffered notifications, forward them to the Child thread (transition to Buffered notification handling state, otherwise transition to Resource cleanup state.

2.1.8. Resource cleanup

Kill the Child thread for which the OOF PCI results were received, and clean up resources associated with the cluster handled by the Child thread.

2.1.9. Terminating

Upon receiving a terminate request clean up all resources.

2.2. Child Thread(s)

2.2.1 Initialization

In this state, perform initialization, and transition to Cluster formation state.

2.2.2. Cluster formation

  • Store details of the cell (which sent the neighbor list change notification) and its neighbors in DB.
  • For each of the neighbors, fetch the neighbor list (via REST API) from SDN-R Config DB (i.e., fetch neighbor of neighbors of the cell that sent the neighbor list change notification).
  • Form a cluster with the cell, its neighbors and neighbors of each of the neighbors.
  • Assign a cluster id.
  • Determine collision/confusion by calling method determine_collision_confusion.
  • Based on number of collisions/confusions and config policy, determine if OOF has to be triggered or more notifications should be awaited (handle also timeout case).

   If OOF has to be triggered
   Then

Transition to Trigger OOF state.

   Else

                Wait for more notifications

           Fi

2.2.3. Wait for notifications

  • Start notif_timer and wait for more notifications
  • If a new notification is received, transition to Cluster expansion state. If notif_timer expires, transition to Trigger OOF state.

2.2.4. Cluster expansion

  • Attach the cell and its neighbors appropriately to the existing cluster.
  • For each of the neighbors, fetch the neighbor list (via REST API) from SDN-R Config DB (i.e., fetch neighbor of neighbors of the cell that sent the neighbor list change notification).
  • Extend the cluster appropriately.
  • Determine collision/confusion by calling method determine_collision_confusion.
  • Based on number of collisions/confusions and config policy, determine if OOF has to be triggered or more notifications should be awaited (handle also timeout case).


  If OOF has to be triggered
  Then

Transition to Trigger OOF state.

          Else

                 Start timer for more notifications

           Fi

Note: When transitioning to this state from Handle buffered notifications state, more than 1 notification may have to be handled.

2.2.5. Trigger OOF

  • Send a PCI_opt request to OOF with cells triggering the request along with the trigger type (neighbor list change)
  • Store details of request in DB.
  • Wait for OOF optimization result.

2.2.6. Send PCI recommendations to Policy

Upon trigger from main thread with OOF PCI optimization result, prepare and send a DMaaP message to Policy (message layout available in Policy sub-page. The message payload layout shall be the same as the yang model contents for the configuration update to be sent by SDN-R towards the RAN. The pnf-name corresponding to the cell-ids can be fetched from Config DB of SDN-R (using REST API). (Note: The layout of the message from SDN-R to RAN is available in the SDN-R sub-page).

After sending the message to Policy, a status update is provided to the Main Thread for further actions.

2.2.7. Handle buffered notification

  • If the main thread triggers a buffered notification to be handled, start buf_timer (if not started already) to buffer the notification (pre-configured value), if not already started (Note), and store the notification contents.
  • Upon expiry of buf_timer, process the received (and stored) notifications by transitioning to Cluster Expansion state.
  • If new notifications are received when in this state, then simply store the notifications and remain in this state.

Note: This is to allow changes to be implemented in that cluster by SDN-R, and RAN to send any new notifications upon neighbor list change (i.e., to minimize running the optimization algorithm unnecessarily).


  • No labels