OSAM Integration Test Case

1. Introduction

This is the integration test cases for OSAM use case.

2. Scope

The integration test case for OSAM use case, it includes VNF and PNF design from SDC, PNF registration, PNF activation, VNF instantiation and closed loop for VNFs

3.Terms, definitions and abbreviations

Abbreviation	Full Name
PNF	Physical Network Function
VNF	Virtual Network Function
GUI	Graphic User Interface
GW	Gateway
SEBA	SDN-Enabled Broadband Access

4. Test Framework

TODO here: Add image to show test framework... can use architecture picture...

Module Introduction

Module	Function
OSAM Core	Seba specific operations are done on this VNF
OSAM GW	Adapter between SEBA and OSAM Core
ONAP	The ONAP system for automation operation

5. Test Description

Test cases for ONAP, existing VF functions are going to be used for OSAM GW and OSAM Core. OSAM GW and OSAM Core specific designs should be applied also designed VFs should be deployed and their LCM should be managed as well. ONAP's PNF functionally such as PNFD at onboarding time, PNF registration, PNF instantiation and PNF activation should be tested for SEBA.

5.1 Test Accounts

Name	Responsibility	Account
Administrator	Responsible for system management; Personnel permission configuration; ONAP external system registration; Operational lifecycle management	demo/demo123456!
Designer	Service template design	cs0008/demo123456!
Tester	Service template test	jm0007/demo123456!
Governor	Service template approve	gv0001/demo123456!
Operator	Service template distribution	op0001/demo123456!

6. SDC Resource Design

6.1 OSAM Core Resource Design

Test NO:	TEST-01
Project:	SDC
Sub Project	Resource import for OSAM Core
Objective:	Support to import the resources for OSAM
Operator:	Designer, Tester
Pre-conditions:	Required Tosca template should be ready for OSAM Core
Test Step: Designer logins to SDC portal. Creates certificates(Or reuse) Creates a new VSP Imports the TOSCA template which is prepared for OSAM Core, to VSP Imports the VSP to Catalogs as a VF Resource and sends for approval to a tester Tester logins to SDC portal and confirm the OSAM Core resource
The Result The OSAM Core resource is imported to catalog as a VF and ready for usage at a service design level.
Observation: We can find a new resource for OSAM Core in SDC catalog.

6.2 OSAM GW Resource Design

Test NO:	TEST-02
Project:	SDC
Sub Project	Resource import for OSAM GW
Objective:	Support to import the resource for OSAM
Operator:	Designer, Tester
Pre-conditions:	1.Required Tosca template should be ready for OSAM GW
Test Step: Designer logins to SDC portal. Creates certificates(Or reuse) Creates a new VSP Imports the TOSCA template which is prepared for OSAM GW, to VSP Imports the VSP to Catalogs as a VF Resource and sends for approval to a tester Tester logins to SDC portal and confirm the OSAM GW resource
The Result The OSAM GW resource is imported to catalog as a VF and ready for usage at a service design level.
Observation: We can find a new resource for OSAM GW in SDC catalog.

6.3 SEBA Resource Design

Test NO:	TEST-03
Project:	SDC
Sub Project	Resource import for SEBA
Objective:	Support to import the resource for OSAM
Operator:	Designer, Tester
Pre-conditions:	1. Required Tosca template should be ready for SEBA
Test Step: Designer logins to SDC portal. Creates certificates(Or reuse) Creates a new VSP Imports the TOSCA template which is prepared for SEBA, to VSP Imports the VSP to Catalogs as a PNF Resource and sends for approval to a tester Tester logins to SDC portal and confirm the SEBA resource
The Result The OSAM GW resource is imported to catalog as a PNF and ready for usage at a service design level.
Observation: We can find a new resource for SEBA in SDC catalog.

7. SDC Service Design

7.1 OSAM Core Service Design

Test NO:	TEST-04
Project:	SDC
Sub Project:	Design OSAM Core service
Objective:	SDC support to design OSAM Core service
Pre-condition:	OSAM Core resource must be cataloged as a VF
Test Step: Designer logins to SDC portal. Creates a new service from the catalog page Fill the required parameters such as category etc. Clicks composition and drags and drop the OSAM Core VF resource Saves the service and sends for testing to a tester user Tester logins to ONAP and approves the service template Governer logins to ONAP and approves the service template Operator logins to ONAP and distributes the service template
Test Result: The service must be cataloged for OSAM The service must be distributed to AAI, DCAE, APPC, SDNC and SO.
Observation: 1. We can find a new service for OSAM Core catalog in SDC 2. We can find a new service to instantiate in VID

7.2 OSAM GW Service Design

Test NO:	TEST-05
Project:	SDC
Sub Project:	Design OSAM GW service
Objective:	SDC support to design OSAM GW service
Pre-condition:	OSAM GW resource must be cataloged as a VF
Test Step: Designer logins to SDC portal. Creates a new service from the catalog page Fill the required parameters such as category etc. Clicks composition and drags and drop the OSAM GW VF resource Saves the service and sends for testing to a tester user Tester logins to ONAP and approves the service template Governer logins to ONAP and approves the service template Operator logins to ONAP and distributes the service template
Test Result: The service must be cataloged for OSAM The service must be distributed to AAI, DCAE, APPC, SDNC and SO.
Observation: 1. We can find a new service for OSAM GW catalog in SDC 2. We can find a new service to instantiate in VID

7.3 SEBA Service Design

Test NO:	TEST-06
Project:	SDC
Sub Project:	Design SEBA service
Objective:	SDC support to design SEBA service
Pre-condition:	OSAM GW resource must be cataloged as a VF and must be instantiated. SEBA resource must be cataloged as a PNF
Test Step: Designer logins to SDC portal. Creates a new service from the catalog page Fill the required parameters such as category etc. Clicks composition and drags and drop the SEBA resource and the alloted resource. Enters the alloted resource configuration related to OSAM GW. Saves the service and sends for testing to a tester user Tester logins to ONAP and approves the service template Governer logins to ONAP and approves the service template Operator logins to ONAP and distributes the service template
Test Result: The service must be cataloged for OSAM The service must be distributed to AAI, DCAE, APPC, SDNC and SO.
Observation: 1. We can find a new service for SEBA catalog in SDC 2. We can find a new service to instantiate in VID

8 Service Instantiation

8.1 OSAM Core Service Instantiation

Test NO:	TEST-07
Project:	Service LCM
Sub-project:	Service instantiation for OSAM Core
Objective:	The Service for OSAM Core can be instantiated.
Pre-conditions:	OSAM Core must be distributed to related ONAP components successfully. Subscriber and Cloud Region must already be added. (can be from robot script...)
Test step: Admin enters the VID UI and selects the service Clicks the create service and selects customer and cloud region and clicks create service. Clicks to create VNF Admin uploads the Preload from SDNC using service information Creates VF inside the VNF.
Test Result: OSAM Core service can be created successfully.
Observation: At the OpenStack, there must be a stack and instances related to OSAM Core.

8.2 OSAM GW Service Instantiation

Test NO:	TEST-08
Project:	Service LCM
Sub-project:	Service instantiation for OSAM GW
Objective:	The Service for OSAM GW can be instantiated.
Pre-conditions:	OSAM Core must be distributed to related ONAP components successfully. Subscriber and Cloud Region must already be added. (can be from robot script...)
Test step: Admin enters the VID UI and selects the service Clicks the create service and selects customer and cloud region and clicks create service. Clicks to create VNF Admin uploads the Preload from SDNC using service information Creates VF inside the VNF.
Test Result: OSAM GW service can be created successfully.
Observation: At the OpenStack, there must be a stack and instances related to OSAM GW.

8.3 SEBA Service Instantiation

Test NO:	TEST-09
Project:	Service LCM
Sub-project:	Service instantiation for SEBA
Objective:	The Service for SEBA can be instantiated.
Pre-conditions:	OSAM GW must be instantiated in any cloud region where it can able to reach SEBA pod. Subscriber must already be added.(can be from robot script...) SEBA service must be cataloged.
Test Steps: Admin enters the VID UI and selects the service Enters CorrelationId(PnfId) and location for SEBA PNF Clicks to create service. NOTE: Test steps can be changed when VID UI is ready for PNF services.
Test Result: SEBA Service can be created successfully.
Observation: ONAP will be waiting for SEBA Pod to Register.

9 PNF

9.1 SEBA Registration And Activation

Test NO:	TEST-10
Project:	PNF
Sub-project:	PNF Registration And Activation
Objective:	Register And Activation of SEBA Pod to ONAP
Pre-conditions:	SEBA Pod must be configured and be aware of its CorrelationId(PnfId) SEBA Pod must be aware of ONAP IP Address SEBA service must be instantiated.
Test Steps: The operator sends a rest request which contains SEBAs CorrelationId and ONAPs IP Address
Test Result: SEBA enters in active state in AAI.
Observation: SEBA Pod should be aware of OSAM GW and needs to connect.

10 Service LCM

10.1 OSAM Core Auto Scaling

Test NO:	TEST-11
Project:	Service LCM
Sub-project:	Auto Scaling
Objective:	Scale OSAM Core instances if instance's resource is low
Pre-conditions:
Test Steps:
Test Result:

11 Data Storage

11.1 Alarm Collection(Check the Use case tracking flow...)

Test NO:	TEST-12
Project:	DCAE
Sub-project:	Data Collection
Objective:
Pre-conditions:
Test Steps:
Test Result:
Observation: