JIRA Development Status
| Project | PTL | JIRA Epics | |
|---|---|---|---|
| 1 | AAI | AAI-682 - Getting issue details... STATUS | |
| 2 | APPC | Randa Maher | APPC-431 - Getting issue details... STATUS |
| 3 | MultiCloud | Former user (Deleted) | NA |
| 4 | OOF | Sarat Puthenpura | OPTFRA-34 - Getting issue details... STATUS |
| 5 | SDC | Michael Lando | SDC-976 - Getting issue details... STATUS |
| 6 | SDNC | Dan Timoney | SDNC-236 - Getting issue details... STATUS |
| 7 | SO | Seshu Kumar Mudiganti | SO-391 - Getting issue details... STATUS |
| 8 | UUI | Tao Shen | USECASEUI-70 - Getting issue details... STATUS |
| 9 | VFC | Yan Yang | VFC-631 - Getting issue details... STATUS |
| 10 | VID | Ofir Sonsino | VID-180 - Getting issue details... STATUS |
| 11 | VNFRQTS | Steven wright | VNFRQTS-158 - Getting issue details... STATUS |
| 12 | vLB/vDNS use case | INT-431 - Getting issue details... STATUS |
Testing
Current Status
- Major Blocker: APPC is not getting configuration data for the vLB (There was a requirements gap/conflict as to how this would work and there is not enough time to fix it in Beijing. This problem will be worked in Casablanca)
- VID-230 - Getting issue details... STATUS Payload to SO is not being configured properly. It could be a problem with the level of ModelInfo
- VID-226: PROV_STATUS of VNFs are not being set to PROV. This was a process issue. Prov_status is supposed to be moved to PROV by an operator after NVT test. Since there is no operator in our test environment it never got changed. This was fixed by modifying "Robot" to update the field. (Currently working around issue by not applying PROV_STATUS filter on VID) VID-226 - Getting issue details... STATUS
- All other test cases are to be tested for Beijing Release.
End to End flow to be tested
Testing Components and Status
| # | Test | Status |
|---|---|---|
| 1 | Onboard vLB to APPC via CDT | COMPLETE |
| 2 | Can configure Manual Scaling request in VID | COMPLETE |
| 3 | VID Sends a Manual Scale Out Request to SO | COMPLETE |
| 4 | SO Recieves Manual Scale Out request | NOT YET TESTED |
| 5 | SO Sends Healthcheck request to DMaaP | NOT YET TESTED |
| 6 | APPC/SDNC pick up Healthcheck request from DMaaP | NOT YET TESTED |
| 7 | APPC/SDNC sends RESTCONF Healthcheck to vLB | NOT YET TESTED |
| 8 | vLB returns Healtcheck status to APPC/SDNC | NOT YET TESTED |
| 9 | SO receives HealthCheck results | NOT YET TESTED |
| 10 | SO sends CreateVF-Module() to A&AI | NOT YET TESTED |
| 11 | SO Sends VF-Module Resource Assignment Request to SDNC | NOT YET TESTED |
| 12 | SDNC does Heat & Resource assignment and sends to A&AI | NOT YET TESTED |
| 13 | SO executes Create VF_Module via Heat | NOT YET TESTED |
| 14 | MultiCloud creates VM with vDNS on it | NOT YET TESTED |
| 15 | SO updates A&AI with Heatstack ID | NOT YET TESTED |
| 16 | SO sends ConfigScaleOut() to DMaaP | NOT YET TESTED |
| 17 | SDNC/APPC pick up ConfigScaleOut() from DMaaP | APPC COMPLETE |
| 18 | SDNC/APPC will collect Configuration Data | NOT YET TESTED |
| 19 | SDNC/APPC sends NETCONF Configuration Data to vLB | APPC COMPLETE |
| 20 | APPC/SDNC sends Success Message to SO via DMaaP | APPC COMPLETE |
| 21 | SO Sends HealthCheck Request to APPC/SDNC via DMaaP | NOT YET TESTED |
| 22 | SDNC/APPC picks up HealthCheck from DMaaP | NOT YET TESTED |
| 23 | APPC/SDNC sends RESTCONF HealthCheck to vLB | NOT YET TESTED |
| 24 | vLB sends HealthCheck status to APPC/SDNC | NOT YET TESTED |
| 25 | SO receives HealthCheck Status | NOT YET TESTED |