Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Overview

Installing ONAP in vanilla OpenStack from command line is very similar to installing ONAP in Rackspace (see Tutorial: Configuring and Starting Up the Base ONAP Stack). The Heat templates that install ONAP in Rackspace and vanilla OpenStack are similar too. The main difference is the way resource-intensive VMs are defined. Unlike OpenStack, Rackspace requires to explicitly create a local disk for memory- or CPU-intensive VMs.

Currently, there are three different Heat templates for ONAP installation in vanilla OpenStack:

  • onap_openstack.yaml / onap_openstack.env: ONAP VMs created out of this template have one vNIC. The vNIC has a private IP towards the Private Management Network and a floating IP. The floating IPs addresses are assigned during ONAP installation by OpenStack, based on floating IP availability. This template can be used when users do not know the set of floating IPs assigned to them. Note that this template should be used in OpenStack Kilo and older releases, because those releases do not support fixed floating IP association via Heat template. CURRENTLY, THIS TEMPLATE DOES NOT SUPPORT DCAE DATA COLLECTION AND ANALYTICS PLATFORM INSTALLATION.
  • onap_openstack_float.yaml / onap_openstack_float.env: ONAP VMs created out of this template have one vNIC. The vNIC has a private IP towards the Private Management Network and a floating IP. The floating IPs addresses are specified ahead of time in the environment file. This template can be used when users always want to assign the same floating IP to an ONAP VM in different ONAP installation. Note that fixed floating IP assignment via Heat template is not supported in OpenStack Kilo and older releases. THIS TEMPLATE SUPPORTS DCAE DATA COLLECTION AND ANALYTICS PLATFORM INSTALLATION. In order to correctly install the Data Collection and Analytics Platform, at this time, the DCAE controller requires manual allocation of five (5) Floating IP addresses to your OpenStack project. To allocate those addresses, from the OpenStack horizon dashboard, click on Compute -> Access & Security -> Floating IPs. Then click “Allocate IP To Project” five times. OpenStack will assign five IPs to you. Then, please assign these the allocated Floating IPs to the following VMs defined in the Heat environment file:

    • dcae_coll_float_ip

    • dcae_hdp1_float_ip

    • dcae_hdp2_float_ip

    • dcae_hdp3_float_ip

    • dcae_db_float_ip

   At run time, the DCAE controller will fetch those IPs from the underlying OpenStack platform and assign to the VMs defined above.


  • onap_openstack_nofloat.yaml / onap_openstack_nofloat.env: ONAP VMs created out of this template have two vNICs: one has a private IP towards the Private Management Network and the other one has a public IP address towards the external network. From a network resource perspective, this template is similar to the Heat template used to build ONAP in Rackspace. CURRENTLY, THIS TEMPLATE DOES NOT SUPPORT DCAE DATA COLLECTION AND ANALYTICS PLATFORM INSTALLATION.


The figure below shows the network setup created with onap_openstack_float.yaml / onap_openstack_float.env. As described above, ONAP VMs have a private IP address in the ONAP Private Management Network space and use floating IP addresses for remote access and connection to Gerrit and Nexus repositories. A router that connects the ONAP Private Management Network to the external network is also created.


Heat Template

In this section, we describe the structure of onap_openstack_float.yaml, which assigns fixed floating IPs to ONAP VMs. However, because the different Heat templates have a similar structure (except for the network setup), the same considerations apply also to onap_openstack.yaml and onap_openstack_nofloat.yaml.

The Heat template contains the parameters and resources (i.e. vCPUs, vNICs, RAM, local and external volumes, ...) necessary to build ONAP components. After ONAP VMs have been created, a post-instantiation bash script that installs software dependencies is ran in any VM. In release 1.0.0, this script was part of the Heat template. Since release 1.1.0, the bash script has been simplified: it only contains the operations necessary to pass configuration parameters to a VM, while the logic that downloads software dependencies and sets the execution environment up has been moved off to a new bash script that is downloaded from Nexus.

The rationale behind this change is that ONAP will need to support multiple platforms (currently it supports Rackspace and vanilla OpenStack), which may require different Heat templates, while a VM installation script will remain unchanged. This will avoid to change a script multiple times, once for each Heat template.

Find below an example of the simplified post-instantiation bash script for MSO, with the list of all the configuration parameters passed to the VM and available in /opt/config:



The post-instantiation bash script downloads (from Nexus) and runs an install script, mso_install.sh in the example above, which installs software dependencies like Git, Java, NTP daemon, docker-engine, docker-compose, etc. Finally, the install script downloads (from Nexus) and runs an init script, e.g. mso_vm_init.sh, which downloads and runs docker images. The rationale of having two bash scripts is that the install script runs only once, after a VM is created, while the init script runs after every VM (re)boot to pickup the latest changes in Gerrit and download and run the latest docker image for a specific ONAP component.

Heat Environment File

In order to correctly install ONAP in vanilla OpenStack, it is necessary to set the following parameters in the Heat environment file, based on the specific OpenStack environment:

  • public_net_id: PUT YOUR NETWORK ID/NAME HERE
  • ubuntu_1404_image: PUT THE UBUNTU 14.04 IMAGE NAME HERE
  • ubuntu_1604_image: PUT THE UBUNTU 16.04 IMAGE NAME HERE
  • flavor_small: PUT THE SMALL FLAVOR NAME HERE
  • flavor_medium: PUT THE MEDIUM FLAVOR NAME HERE
  • flavor_large: PUT THE LARGE FLAVOR NAME HERE
  • flavor_xlarge: PUT THE XLARGE FLAVOR NAME HERE
  • pub_key: PUT YOUR PUBLIC KEY HERE
  • openstack_tenant_id: PUT YOUR OPENSTACK PROJECT ID HERE
  • openstack_username: PUT YOUR OPENSTACK USERNAME HERE
  • openstack_api_key: PUT YOUR OPENSTACK PASSWORD HERE
  • horizon_url: PUT THE HORIZON URL HERE
  • keystone_url: PUT THE KEYSTONE URL HERE
  • dns_list: PUT THE ADDRESS OF THE EXTERNAL DNS HERE (e.g. a comma-separated list of IP addresses in your /etc/resolv.conf in UNIX-based Operating Systems)
  • external_dns: PUT THE FIRST ADDRESS OF THE EXTERNAL DNS LIST HERE
  • aai1_float_ip: PUT A&AI INSTANCE 1 FLOATING IP HERE
  • aai2_float_ip: PUT A&AI INSTANCE 2 FLOATING IP HERE
  • appc_float_ip: PUT APP-C FLOATING IP HERE
  • dcae_float_ip: PUT DCAE FLOATING IP HERE
  • dcae_coll_float_ip: PUT DCAE COLLECTOR FLOATING IP HERE
  • dcae_db_float_ip: PUT DCAE DATABASE FLOATING IP HERE
  • dcae_hdp1_float_ip: PUT DCAE HADOOP VM1 FLOATING IP HERE
  • dcae_hdp2_float_ip: PUT DCAE HADOOP VM2 FLOATING IP HERE
  • dcae_hdp3_float_ip: PUT DCAE HADOOP VM3 FLOATING IP HERE
  • dns_float_ip: PUT DNS FLOATING IP HERE
  • mso_float_ip: PUT MSO FLOATING IP HERE
  • mr_float_ip: PUT MESSAGE ROUTER FLOATING IP HERE
  • policy_float_ip: PUT POLICY FLOATING IP HERE
  • portal_float_ip: PUT PORTAL FLOATING IP HERE
  • robot_float_ip: PUT ROBOT FLOATING IP HERE
  • sdc_float_ip: PUT SDC FLOATING IP HERE
  • sdnc_float_ip: PUT SDN-C FLOATING IP HERE
  • vid_float_ip: PUT VID FLOATING IP HERE

Note:

A&AI now has two (2) instances. One has the docker containers that run the A&AI logic and one has databases and third-party software dependencies.

Getting ENV options

Image list

$ glance image-list | grep buntu
| c60d00b6-d03e-492b-9eed-e6580b438619 | Ubuntu_16.04_xenial |

Instance flavors

$ openstack flavor list | grep onap
| 123 | onap_small | 4192 | 0 | 0 | 1 | True |
| 124 | onap_medium | 8192 | 0 | 0 | 1 | True |
| 125 | onap_large | 8192 | 0 | 0 | 2 | True |
| 126 | onap_xlarge | 16192 | 0 | 0 | 2 | True |

Public network

$ openstack network list | grep public
| b4f41afd-1f08-47f8-851b-ca536bffffff | public | d4902035-2d4c-40cc-8a05-e916401fffff |

Note:

Be careful not to use private address space 172.18.0.0/16 for the setup of vanilla opernstack and/or the provider network and the floating addresses therein.
Some containers create a route in the hosting VM form 172.18.0.0./16 to a br-<some-hex-string> bridge which means these containers cannot connect to any other VM and/or container in the 172.18.0.0/16 space. DCAE might be the most prominent victim for that. See also 3246457 in https://wiki.onap.org/questions


Note:

Neutron may require that the dns_nameservers property of a OS::Neutron::Subnet resource be explicitly set, in order to allow VMs in the subnet to access the external network. dns_nameservers is a list of DNS IP addresses. However, some OpenStack installations do not support lists is the "user_data" section of a Heat template, which is used to build configuration files that are used during ONAP installation. As such, we define two different parameters: 1) dns_list is a list of DNS IP addresses that is provided to Neutron; 2) external_dns is a string that contains one of the DNS IP addresses in the list and can be used in the "user_data" section. In many cases, when only one DNS address is provided, these two parameters will be set to the same value.


All the other parameters in the environment file are set and can be left untouched.

Note that the IP addresses in the ONAP Private Management Network are also set, but they can be changed at will, still making sure that they are consistent with the private network CIDR.

  • oam_network_cidr: 10.0.0.0/8
  • aai1_ip_addr: 10.0.1.1
  • aai2_ip_addr: 10.0.1.2
  • appc_ip_addr: 10.0.2.1
  • dcae_ip_addr: 10.0.4.1
  • dns_ip_addr: 10.0.100.1
  • mso_ip_addr: 10.0.5.1
  • mr_ip_addr: 10.0.11.1
  • policy_ip_addr: 10.0.6.1
  • portal_ip_addr: 10.0.9.1
  • robot_ip_addr: 10.0.10.1
  • sdc_ip_addr: 10.0.3.1
  • sdnc_ip_addr: 10.0.7.1
  • vid_ip_addr: 10.0.8.1

Finally, the Heat environment file contains some DCAE-specific parameters. Some of them are worth mentioning:

  • dcae_base_environment: 1-NIC-FLOATING-IPS
  • dcae_zone, dcae_state: The location in which DCAE is deployed
  • openstack_region: The OpenStack Region in which DCAE is deployed (also used by MSO)

dcae_base_environment specifies the DCAE networking configuration and shouldn't be modified. openstack_region must reflect the OpenStack OS_REGION_NAME environment variable (please refer to Tutorial: Configuring and Starting Up the Base ONAP Stack for cloud environment variables), while dcae_zone and dcae_state can contain any meaningful location information that helps the user distinguish between different DCAE deployments. For example, if an instance of DCAE is deployed in a data center in New York City, the two parameters can assume the following values:

  • dcae_zone: nyc01
  • dcae_state: ny



  • No labels