TODO: update/link Running the ONAP Demos
TODO :20171127
- using MultiCloud inside SO and changing - Cloud-Config.json
- Fixing the External IP Address issue with vFW VM.
TODO :20171128
- To Conclude Cloud-Config.json for using MultiCloud for creating the Vf Module .
- Fixing the External IP Address issue with vFWCL VM's ..
- Is there similar splitting applicable to vLB/vDNS similar to vFWCL package .
This page aims to capture all the information , challenges and troubleshooting tricks to run vFWCL Demo successfully . This page assumes that you should have
- successfully deployed Openstack/VIO Successfully in a Multi Node Environment .
- Firewall Rules on Horizon dashboard has been setup to allow SSH , HTTP, HTTPS .
- Ports 10001 to 10005 towards Open Internet have been Open if your environment is behind a proxy.
running vFW Demo requires two workFlow .vFW Onboarding and vFW Instantation .
a. There are important Point that should be taken care
a.1 use vFWCL Zip images only because vFW has been spiltted into 2 packages for Amsterdam release older vFW Does not work .
a.2 Robot VM and demo.sh init can not be used for distributing vFWCL services because Robot has not been evolved to init and distribute the Split fireall vFWCl,
a.3 All the 3 VM's as a part of vFW should have external network attached to them since these VM's download some data from External /Open Internet .
a.4 try check in the browser < private IP address of Sink VM :667 > and check if the Graph are displayed .
vFW Oboarding is step4 to step12 . Post vFW/Service Distribution the workFlow of vFW instantiation gets executed.
1. Deploy the ONAP using the latest heat template .
1.a location of the onap heat environment files ( environment and yaml file ) is
1.b Modify the environment file as per your environment Openstack/VIO Deployment .
1.c our Environment File with filled values .
1.d Heat Command to be executed on controller Node .
openstack stack create -t heat_ONAP_onap_openstack.yaml -e heat_ONAP_onap_openstack.env ONAP
1.e ONAP Stack Creation + ONAP VM's Deployment Challenges
- ONAP Stack gets created within 15-30 mins
- Docker Pull as a part of Each ONAP VM Creation is generally not clean . There are 2 Global Problem that we keep facing
- curl command for docker-compose.yaml pull failing .
- directory creation in VID , SDNC and SDC failes
- SDC/SDNC does a GITClone for roughly 800 MB of Size .This hangs intermittenly .
- AAI2 and AAI1 - has Init issues if certain order is not followed .
-SDC sanity container keeps exiting intermittently
WorkArounds -
2. Run the healthCheck inside Robot VM.
2.1 login to Robot VM .
2.2 go to openecompete_container
2.3 root@onap-robot:/opt# ./ete.sh health
Starting Xvfb on display :88 with res 1280x1024x24
Executing robot tests at log level TRACE
==============================================================================
OpenECOMP ETE
==============================================================================
OpenECOMP ETE.Robot
==============================================================================
OpenECOMP ETE.Robot.Testsuites
==============================================================================
OpenECOMP ETE.Robot.Testsuites.Health-Check :: Testing ecomp components are...
==============================================================================
Basic DCAE Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fd56db2bc90>: Failed to establish a new connection: [Errno 111] Connection refused',)': /healthcheck
[ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fd56f898c10>: Failed to establish a new connection: [Errno 111] Connection refused',)': /healthcheck
[ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fd56f542dd0>: Failed to establish a new connection: [Errno 111] Connection refused',)': /healthcheck
| FAIL |
ConnectionError: HTTPConnectionPool(host='10.0.4.1', port=8080): Max retries exceeded with url: /healthcheck (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fd56daab690>: Failed to establish a new connection: [Errno 111] Connection refused',))
------------------------------------------------------------------------------
Basic SDNGC Health Check | PASS |
------------------------------------------------------------------------------
Basic A&AI Health Check | PASS |
------------------------------------------------------------------------------
Basic Policy Health Check | PASS |
------------------------------------------------------------------------------
Basic MSO Health Check | PASS |
------------------------------------------------------------------------------
Basic ASDC Health Check | PASS |
------------------------------------------------------------------------------
Basic APPC Health Check | PASS |
------------------------------------------------------------------------------
Basic Portal Health Check | PASS |
------------------------------------------------------------------------------
Basic Message Router Health Check | PASS |
------------------------------------------------------------------------------
Basic VID Health Check | PASS |
------------------------------------------------------------------------------
Basic Microservice Bus Health Check | PASS |
------------------------------------------------------------------------------
Basic CLAMP Health Check | PASS |
------------------------------------------------------------------------------
catalog API Health Check | PASS |
------------------------------------------------------------------------------
emsdriver API Health Check | PASS |
------------------------------------------------------------------------------
gvnfmdriver API Health Check | PASS |
--------------------
TODO: update/link Running the ONAP Demos
TODO :20171207
- To Conclude Cloud-Config.json for using MultiCloud for creating the Vf Module .
MultiCloud Support in OOM
| Jira Legacy | ||||||
|---|---|---|---|---|---|---|
|
TODO :20171207
OOM Challenges
- TO have a list of small list of kubectl commands needed for OOM .
- OOM Kubernetes Pods gets rebooted and every information is wiped off in OOM .This requires doing the complete service distribution and AAI Steps and VNF/VF Creation all over again .
This page aims to capture all the information , challenges and troubleshooting tricks to run vFWCL Demo successfully . This page assumes that you should have
- successfully deployed Openstack/VIO Successfully in a Multi Node Environment .
- Firewall Rules on Horizon dashboard has been setup to allow SSH , HTTP, HTTPS .
- Ports 10001 to 10005 towards Open Internet have been Open if your environment is behind a proxy.
running vFW Demo requires two workFlow .vFW Onboarding and vFW Instantation .
a. There are important Point that should be taken care
a.1 use vFWCL Zip images only because vFW has been spiltted into 2 packages for Amsterdam release older vFW Does not work .
a.2 Robot VM and demo.sh init can not be used for distributing vFWCL services because Robot has not been evolved to init and distribute the Split fireall vFWCl,
a.3 All the 3 VM's as a part of vFW should have external network attached to them since these VM's download some data from External /Open Internet .
a.4 try check in the browser < private IP address of Sink VM :667 > and check if the Graph are displayed .
a.5 for vLB/vDNS - There is no splitting done as in vFWCL .
a.6 vFWCL/vDNS/vLB requires some additional steps to make them pingable .
KubeCtl Commands (OOM Use)
1. Edit the mso-docker.json file
I see two ways of doing this:
- from the pods itself
kubectl --namespace=onap-mso exec -it mso-3784963895-brdxx bash
vi /shared/mso-docker.json
- from the host running the containers
vi /dockerdata-nfs/onap/mso/mso/mso-docker.json
2. Bounce the mso pod
kubectl --namespace=onap-mso delete pod mso-3784963895-brdxx
vFW Oboarding is step4 to step12 . Post vFW/Service Distribution the workFlow of vFW instantiation gets executed.
1. Deploy the ONAP using the latest heat template .
1.a location of the onap heat environment files ( environment and yaml file ) is
1.b Modify the environment file as per your environment Openstack/VIO Deployment .
1.c our Environment File with filled values .
1.d Heat Command to be executed on controller Node .
openstack stack create -t heat_ONAP_onap_openstack.yaml -e heat_ONAP_onap_openstack.env ONAP
1.e ONAP Stack Creation + ONAP VM's Deployment Challenges
- ONAP Stack gets created within 15-30 mins
- Docker Pull as a part of Each ONAP VM Creation is generally not clean .
Docker Pull Errors
a. - Image Not Found Error on Nexus Repo for multiple different Docker Images .
Error: image aaionap/hbase:1.0.0 not found
b- TLS Handshake Error for few docker images .
Error response from daemon: Get https://nexus3.onap.org:10001/v2/openecomp/data-router/manifests/1.1-STAGING-latest: net/http: TLS handshake timeout
Error response from daemon: Get https://nexus3.onap.org:10001/v2/openecomp/aai-traversal/manifests/1.1-STAGING-latest: net/http: TLS handshake timeout
c- I/O Timeout
Error response from daemon: Get https://nexus3.onap.org:10001/v1/_ping: dial tcp 199.204.45.137:10001: i/o timeout
d- curl command for docker-compose.yaml pull inside initscripts keeps failing Intermittenly .
e- directory creation in VID , SDNC and SDC failes . t
d and e requires manual creation of directory and relaunch Init scripts manually
f- SDC/SDNC does a GITClone for roughly 800 MB of Size .This hangs intermittently .
workaround -
VID - remove vid directory and placed docker-compose file inside /opt and start /vid_install.sh
SDC
- create mkdir -p /opt/sdc and trigger reinstall.sh
Post Docker Download errors .
- AAI2 and AAI1 - has Init issues if certain order is not followed .
-SDC sanity container keeps exiting intermittently
WorkArounds -
– reboot AA1 and AAi2 helps in recovering.
2. Run the healthCheck inside Robot VM.
2.1 login to Robot VM .
2.2 go to openecompete_container
2.3 root@onap-robot:/opt# ./ete.sh health
Starting Xvfb on display :88 with res 1280x1024x24
Executing robot tests at log level TRACE
==============================================================================
OpenECOMP ETE
==============================================================================
OpenECOMP ETE.Robot
==============================================================================
OpenECOMP ETE.Robot.Testsuites
==============================================================================
OpenECOMP ETE.Robot.Testsuites.Health-Check :: Testing ecomp components are...
==============================================================================
Basic DCAE Health Check [ WARN ] Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fd56db2bc90>: Failed to establish a new connection: [Errno 111] Connection refused',)': /healthcheck
[ WARN ] Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fd56f898c10>: Failed to establish a new connection: [Errno 111] Connection refused',)': /healthcheck
[ WARN ] Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fd56f542dd0>: Failed to establish a new connection: [Errno 111] Connection refused',)': /healthcheck
| FAIL |
ConnectionError: HTTPConnectionPool(host='10.0.4.1', port=8080): Max retries exceeded with url: /healthcheck (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fd56daab690>: Failed to establish a new connection: [Errno 111] Connection refused',))
----------------------------------------------------------------------huaweivnfmdriver API Health Check --------
Basic SDNGC Health Check | PASS |
------------------------------------------------------------------------------
Basic A&AI Health Check | PASS |
-----------------------------------
multicloud API Health Check | PASS |
------------------------------------------------------------------------------
multicloud-ocata API Health Check | PASS |
------------------------------------------------------------------------------
multicloud-titanium_cloud API Health Check | PASS |
------------------------------------------------------------------------------
multicloud-vio API Health Check | PASS |
------------------------------------------------------------------------------
nokiavnfmdriver API Health Check | PASS |
------------------------------------------------------------------------------
nslcm API Health Check | PASS |
------------------------------------------------------------------------------
resmgr API Health Check | PASS |
------------------------------------------------------------------------------
usecaseui-gui API Health Check | PASS |
------------------------------------------------------------------------------
vnflcm API Health Check | PASS |
------------------------------------------------------------------------------
vnfmgr API Health Check | PASS |
------------------------------------------------------------------------------
vnfres API Health Check | PASS |
------------------------------------------------------------------------------
workflow API Health Check | PASS |
------------------------------------------------------------------------------
ztesdncdriver API Health Check | PASS |
------------------------------------------------------------------------------
ztevmanagerdriver API Health Check | PASS |
------------------------------------------------------------------------------
OpenECOMP ETE.Robot.Testsuites.Health-Check :: Testing ecomp compo... | FAIL |
30 critical tests, 29 passed, 1 failed
30 tests total, 29 passed, 1 failed
==============================================================================
OpenECOMP ETE.Robot.Testsuites | FAIL |
30 critical tests, 29 passed, 1 failed
30 tests total, 29 passed, 1 failed
==============================================================================
OpenECOMP ETE.Robot | FAIL |
30 critical tests, 29 passed, 1 failed
30 tests total, 29 passed, 1 failed
==============================================================================
OpenECOMP ETE | FAIL |
30 critical tests, 29 passed, 1 failed
30 tests total, 29 passed, 1 failed
==============================================================================
3. Once the healthCheck are passed except DCAE .
4. login to Robot VM .
5. Update the CLOUD_OWNER inside below file in Robot VM ---------------------------------------------------------------
Basic Policy Health Check | PASS |
------------------------------------------------------------------------------
Basic MSO Health Check | PASS |
------------------------------------------------------------------------------
Basic ASDC Health Check | PASS |
------------------------------------------------------------------------------
Basic APPC Health Check | PASS |
------------------------------------------------------------------------------
Basic Portal Health Check | PASS |
------------------------------------------------------------------------------
Basic Message Router Health Check | PASS |
------------------------------------------------------------------------------
Basic VID Health Check | PASS |
------------------------------------------------------------------------------
Basic Microservice Bus Health Check | PASS |
------------------------------------------------------------------------------
Basic CLAMP Health Check | PASS |
------------------------------------------------------------------------------
catalog API Health Check | PASS |
------------------------------------------------------------------------------
emsdriver API Health Check | PASS |
------------------------------------------------------------------------------
gvnfmdriver API Health Check | PASS |
------------------------------------------------------------------------------
huaweivnfmdriver API Health Check | PASS |
------------------------------------------------------------------------------
multicloud API Health Check | PASS |
------------------------------------------------------------------------------
multicloud-ocata API Health Check | PASS |
------------------------------------------------------------------------------
multicloud-titanium_cloud API Health Check | PASS |
------------------------------------------------------------------------------
multicloud-vio API Health Check | PASS |
------------------------------------------------------------------------------
nokiavnfmdriver API Health Check | PASS |
------------------------------------------------------------------------------
nslcm API Health Check | PASS |
------------------------------------------------------------------------------
resmgr API Health Check | PASS |
------------------------------------------------------------------------------
usecaseui-gui API Health Check | PASS |
------------------------------------------------------------------------------
vnflcm API Health Check | PASS |
------------------------------------------------------------------------------
vnfmgr API Health Check | PASS |
------------------------------------------------------------------------------
vnfres API Health Check | PASS |
------------------------------------------------------------------------------
workflow API Health Check | PASS |
------------------------------------------------------------------------------
ztesdncdriver API Health Check | PASS |
------------------------------------------------------------------------------
ztevmanagerdriver API Health Check | PASS |
------------------------------------------------------------------------------
OpenECOMP ETE.Robot.Testsuites.Health-Check :: Testing ecomp compo... | FAIL |
30 critical tests, 29 passed, 1 failed
30 tests total, 29 passed, 1 failed
==============================================================================
OpenECOMP ETE.Robot.Testsuites | FAIL |
30 critical tests, 29 passed, 1 failed
30 tests total, 29 passed, 1 failed
==============================================================================
OpenECOMP ETE.Robot | FAIL |
30 critical tests, 29 passed, 1 failed
30 tests total, 29 passed, 1 failed
==============================================================================
OpenECOMP ETE | FAIL |
30 critical tests, 29 passed, 1 failed
30 tests total, 29 passed, 1 failed
==============================================================================
3. Once the healthCheck are passed except DCAE .
TODO 20171128 - To check and conclude if the step4 ,5,6 ,11,12 are applicable to vLB/vDNS , these are not applicable to vFWCL .
4. login to Robot VM .
5. Update the CLOUD_OWNER inside below file in Robot VM .
/var/opt/OpenECOMP_ETE/robot/resources/global_properties.robot
to be same value as given in ONAP heat Environment File . For our case - we gave "openstack".
6. create the directory /share/heat/vFW inside Robot VM .
7. download the vfw files ( yaml file , json file and base file ) from git repo and place it inside /share/heat/vFW/ on Robot VM.
8. Create the CloudRegion with openstack , RegionOne in AAI .
Headers to be used in POSTMAN RestRequest to AAI .
8.1 create Cloud Owner and Region
PUT https://<aai_ip>:8443/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/openstack/RegionOne
Request Body
{
"cloud-owner": "openstack",
"cloud-region-id": "RegionOne",
}
8.2 verify with GET Command
GET https://<aai_ip>:8443/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/openstack/RegionOne
in the response you will get the resource-version .
8.3 create the Tenant and put tht the resource version from 8.2 into requestBody
PUT https://<aai_ip:8443/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/openstack/RegionOne
RequestBody
{
"cloud-owner": "openstack",
"cloud-region-id": "RegionOne",
"resource-version": "1510199020715",
"cloud-type": "openstack",
"owner-defined-type": "owner type",
"cloud-region-version": "v2.5",
"cloud-zone": "cloud zone",
"tenants": {
"tenant": [{
"tenant-id": "74c7fa9e54f246f5878c902c346e590d",
"tenant-name": "onap"
}]
}
}
8.4 Imp Points - "Cloud Owner " , "Cloud-region-id" has to be same as in the ONAP Heat Environment File .
9. Create the services and complexes in the A&AI .
9.1 create the service
9.1.1 go to the link https://www.uuidgenerator.net/ and pick the Version 4 UUID like: f3fe1523-09ec-4d91-91ae-60ef9a2dd050
9.1.2
PUT https://aai_ip:8443/aai/v11/service-design-and-creation/services/service/f3fe1523-09ec-4d91-91ae-60ef9a2dd050
{
"service-id": "f3fe1523-09ec-4d91-91ae-60ef9a2dd050",
"service-description": "vFW"
}
9.1.3 GET https://aai_ip:8443/aai/v11/service-design-and-creation/services
TODO - 9.2 create the complex
9.2.1 PUT Command
PUT https://aai_ip:8443/aai/v11/cloud-infrastructure/complexes/complex/clli1
{
"physical-location-type":"Delhi",
"street1":"str1",
"city":"Delhi",
"postal-code":"110001",
"country":"India",
"region":"Asia"
}
9.2.2 GET Command
GET /aai/v11/cloud-infrastructure/complexes/complex/clli1
10. Create the Customer inside A&AI where the Region is to be same as given in AAI_ZONE in /var/opt/OpenECOMP_ETE/robot/resources/global_properties.robot (Note that this file is under the openecompete_container Docker)
10.1 create the customer
PUT https://aai_ip:8443/aai/v11/business/customers/customer/Demonstration3
{
"global-customer-id": "Demonstration3",
"subscriber-name": "Demonstration3",
"subscriber-type": "INFRA",
"service-subscriptions": {
"service-subscription": [
{
"service-type": "vFW",
"relationship-list": {
"relationship": [{
"related-to": "tenant",
"relationship-data": [
{"relationship-key": "cloud-region.cloud-owner", "relationship-value": "openstack"},
{"relationship-key": "cloud-region.cloud-region-id", "relationship-value": "RegionOne"},
{"relationship-key": "tenant.tenant-id", "relationship-value": "74c7fa9e54f246f5878c902c346e590d"}
]
}]
}
},
{
"service-type": "vLB",
"relationship-list": {
"relationship": [{
"related-to": "tenant",
"relationship-data": [
{"relationship-key": "cloud-region.cloud-owner", "relationship-value": "openstack"},
{"relationship-key": "cloud-region.cloud-region-id", "relationship-value": "RegionOne"},
{"relationship-key": "tenant.tenant-id", "relationship-value": "74c7fa9e54f246f5878c902c346e590d"}
]
}]
}
},
{
"service-type": "vIMS",
"relationship-list": {
"relationship": [{
"related-to": "tenant",
"relationship-data": [
{"relationship-key": "cloud-region.cloud-owner", "relationship-value": "openstack"},
{"relationship-key": "cloud-region.cloud-region-id", "relationship-value": "RegionOne"},
{"relationship-key": "tenant.tenant-id", "relationship-value": "74c7fa9e54f246f5878c902c346e590d"}
]
}]
}
}
]}
}
10.2 Imp Points -
10.2.1 "Cloud-region-id" has to be same as given AAI_ZONE in /var/opt/OpenECOMP_ETE/robot/resources/global_properties.robot .
10.2.2 Every time a new customer is be used by Robot VM . The customer needs to be created inside A&AI .
TODO- 10.2.3 tenant id should be picked from horizon dashboard or ONAP heat environment file ?. This needs to be concluded .
11. Modify the PREFIX_DEMO in the below Files .
/var/opt/OpenECOMP_ETE/robot/resources/globaldemo_propertiespreload.robot
to be same value as given in ONAP heat Environment File . For our case - we gave "openstack".
6. create the directory /share/heat/vFW 12. Run the demo.sh init inside Robot VM .
7. download the vfw files ( yaml file , json file and base file ) from git repo and place it inside /share/heat/vFW/ on Robot VM.
8. Create the CloudRegion with openstack , RegionOne in AAI .
Headers to be used in POSTMAN RestRequest to AAI .
8.1 create Cloud Owner and Region
PUT https://<aai_ip>:8443/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/openstack/RegionOne
Request Body
{
"cloud-owner": "openstack",
"cloud-region-id": "RegionOne",
}
8.2 verify with GET Command
GET https://<aai_ip>:8443/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/openstack/RegionOne
in the response you will get the resource-version .
8.3 create the Tenant and put tht the resource version from 8.2 into requestBody
PUT https://<aai_ip:8443/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/openstack/RegionOne
RequestBody
{{
"cloud-owner": "openstack",
"cloud-region-id": "RegionOne",
"resource-version": "1510199020715",
"cloud-type": "openstack",
"owner-defined-type": "owner type",
"cloud-region-version": "v2.5",
"cloud-zone": "cloud zone",
"tenants": {
"tenant": [{
"tenant-id": "74c7fa9e54f246f5878c902c346e590d",
"tenant-name": "onap"
}]
}
}
}
8.4 Imp Points - "Cloud Owner " , "Cloud-region-id" has to be same as in the ONAP Heat Environment File .
9. Create the services and complexes in the A&AI .
9.1 create the service
9.1.1 go to the link https://www.uuidgenerator.net/ and pick the Version 4 UUID like: f3fe1523-09ec-4d91-91ae-60ef9a2dd050
9.1.2
PUT https://aai_ip:8443/aai/v11/service-design-and-creation/services/service/f3fe1523-09ec-4d91-91ae-60ef9a2dd050
{
"service-id": "f3fe1523-09ec-4d91-91ae-60ef9a2dd050",
"service-description": "vFW"
}
9.1.3 GET https://aai_ip:8443/aai/v11/service-design-and-creation/services
TODO - 9.2 create the complex
9.2.1 PUT Command
PUT https://aai_ip:8443/aai/v11/cloud-infrastructure/complexes/complex/clli1
{
"physical-location-type":"Delhi",
"street1":"str1",
"city":"Delhi",
"postal-code":"110001",
"country":"India",
"region":"Asia"
}
9.2.2 GET Command
GET /aai/v11/cloud-infrastructure/complexes/complex/clli1
10. Create the Customer inside A&AI where the Region is to be same as given in AAI_ZONE in /var/opt/OpenECOMP_ETE/robot/resources/global_properties.robot
10.1 create the customer
...
}
10.2 Imp Points -
10.2.1 "Cloud-region-id" has to be same as given AAI_ZONE in /var/opt/OpenECOMP_ETE/robot/resources/global_properties.robot .
10.2.2 Every time a new customer is be used by Robot VM . The customer needs to be created inside A&AI .
TODO- 10.2.3 tenant id should be picked from horizon dashboard or ONAP heat environment file ?. This needs to be concluded .
11. Modify the PREFIX_DEMO in the below Files .
/var/opt/OpenECOMP_ETE/robot/resources/demo_preload.robot
12. Run the demo.sh init inside Robot VM .
TODO – Issues faced till Step12 and workaround used .
13. Login to ONAP Portal as demo user and check on the existing services on VID Gui .
14. From the VID Gui - Deploy the service and Create the serviceinstance
15 .From the VID Gui - Create the VNF instances .
16 . Access the SDNC Admin Portal and Add the VNF profile .
16.1 create the user if not created already .<sdnc_ip>:8843/signup
16.2 Once sign up done and then <sdnc_ip>:8843/login
16.3 Add VNF Profile , Important thing to Note is VNF Type to be filled in .
17 . uploading the VNF Topology JSON FIle using SDNC VNF API
17.1SDNC VM – login/password for the SDNC API Access .
username: admin
password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
17.2 Access <sdnc_ip>:8282/apidoc/explorer/index.html on the SDNC VM.
17.3 Click on VNF-API
17.4 Scroll down to the POST /operations/VNF-API:preload-vnf-topology-operation
17.5 filled JSON vFW Files from our environment
{
"input":
{
"request-information":
{
"notification-url":"openecomp.org",
"order-number":"1",
"order-version":"1",
"request-action":"PreloadVNFRequest",
"request-id": "robot20"
},
"sdnc-request-header":
{
"svc-action": "reserve",
"svc-notification-url": "http://openecomp.org:8080/adapters/rest/SDNCNotify",
"svc-request-id":"robot20"
},
"vnf-topology-information":
{
"vnf-assignments":
{
"availability-zones":[],
"vnf-networks":[],
"vnf-vms":[]
},
"vnf-parameters":
[
{"vnf-parameter-name":"vfw_private_ip_2","vnf-parameter-value": "10.0.100.4"},
{"vnf-parameter-name":"public_net_id","vnf-parameter-value": "87cdc31f-362f-4bdc-8b50-a7894ed759e9"},
{"vnf-parameter-name":"key_name","vnf-parameter-value":"onapviokey"},
{"vnf-parameter-name":"pub_key","vnf-parameter-value":"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC4CegUDC7k2bqru0KkQ2HzSXZMZJ0cJBizQkt82CZ4Z8RlLFbxNwYhcuI67zEEB3PeVGzw6xsDDo0Su9OT1DxzFsLy14yxWI7+4K0kv/FYKw0ULT7UrBi3sjZI+e65Y/YL7tSZxiPHnPSncBFhMqXZT+WpKJF3BPDIpzbgnvbTH0O1OOQPYmN63Z87Alu8abZKCkClwbdmfl1dnEUoIve1/0f8jZTMC/qO1mQt04s59V7HNQyykZ6POSItH/cgjy3HI7e7gr8E/MseK/LOGu0mVPpcay/FcUKxI+u+sZ/GqY5+1nMQKKVnBWhc5P+cRoMMWjlNs7AiJmrnueAbNDLl Generated-by-Nova"},
{"vnf-parameter-name":"repo_url","vnf-parameter-value":"https://nexus.onap.org/content/sites/raw"}
],
"vnf-topology-identifier":
{
"service-type":"7a9ae3bc-caef-4200-a2f7-2afdbaa41e0d",
"generic-vnf-name":"demo4VFWVNF20",
"generic-vnf-type":"c38867a1-c1b8-422f-8808 0",
"vnf-name":"demo4VFWVNF20-1",
"vnf-type":"C38867a1C1b8422f8808..base_vfw..module-0"
}
}
}
}
17.6 filled JSON vLb Files from our environment
{
"input":
{
"request-information":
{
"notification-url":"openecomp.org",
"order-number":"1",
"order-version":"1",
"request-action":"PreloadVNFRequest",
"request-id": "robot20"
},
"sdnc-request-header":
{
"svc-action": "reserve",
"svc-notification-url": "http://openecomp.org:8080/adapters/rest/SDNCNotify",
"svc-request-id":"robot20"
},
"vnf-topology-information":
{
"vnf-assignments":
{
"availability-zones":[],
"vnf-networks":[],
"vnf-vms":[]
},
"vnf-parameters":
[
{"vnf-parameter-name":"public_net_id","vnf-parameter-value": "aa83b3d9-dda6-4106-b776-9280799993ce"},
{"vnf-parameter-name":"vfw_private_ip_2","vnf-parameter-value": "10.0.100.4"},
{"vnf-parameter-name":"vfw_image_name","vnf-parameter-value": "ubuntu_16.04"},
{"vnf-parameter-name":"key_name","vnf-parameter-value":"onapkey"},
{"vnf-parameter-name":"pub_key","vnf-parameter-value":"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC4CegUDC7k2bqru0KkQ2HzSXZMZJ0cJBizQkt82CZ4Z8RlLFbxNwYhcuI67zEEB3PeVGzw6xsDDo0Su9OT1DxzFsLy14yxWI7+4K0kv/FYKw0ULT7UrBi3sjZI+e65Y/YL7tSZxiPHnPSncBFhMqXZT+WpKJF3BPDIpzbgnvbTH0O1OOQPYmN63Z87Alu8abZKCkClwbdmfl1dnEUoIve1/0f8jZTMC/qO1mQt04s59V7HNQyykZ6POSItH/cgjy3HI7e7gr8E/MseK/LOGu0mVPpcay/FcUKxI+u+sZ/GqY5+1nMQKKVnBWhc5P+cRoMMWjlNs7AiJmrnueAbNDLl Generated-by-Nova"},
{"vnf-parameter-name":"repo_url","vnf-parameter-value":"https://nexus.onap.org/content/sites/raw"}
],
"vnf-topology-identifier":
{
"service-type":"7a9ae3bc-caef-4200-a2f7-2afdbaa41e0d",
"generic-vnf-name":"demo4VFWVNF10",
"generic-vnf-type":"c38867a1-c1b8-422f-8808 0",
"vnf-name":"demo4VFWVNF10-1",
"vnf-type":"C38867a1C1b8422f8808..base_vfw..module-0"
}
}
}
}
18. Go To Portal GUI and From VID - create VF Module
18.a SO↔VIM(Openstack/VIO) - This does not use Multi Cloud TODO – Issues faced till Step12 and workaround used .
13. Login to ONAP Portal as demo user and check on the existing services on VID Gui .
14. From the VID Gui - Deploy the service and Create the serviceinstance
15 .From the VID Gui - Create the VNF instances .
16 . Access the SDNC Admin Portal and Add the VNF profile .
16.1 create the user if not created already .<sdnc_ip>:8843/signup
16.2 Once sign up done and then <sdnc_ip>:8843/login
16.3 Add VNF Profile , Important thing to Note is VNF Type to be filled in .
17 . uploading the VNF Topology JSON FIle using SDNC VNF API
17.1SDNC VM – login/password for the SDNC API Access .
username: admin
password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
17.2 Access <sdnc_ip>:8282/apidoc/explorer/index.html on the SDNC VM.
17.3 Click on VNF-API
17.4 Scroll down to the POST /operations/VNF-API:preload-vnf-topology-operation
17.5 filled JSON vFW Files from our environment
{
"input":
{
"request-information":
{
"notification-url":"openecomp.org",
"order-number":"1",
"order-version":"1",
"request-action":"PreloadVNFRequest",
"request-id": "robot20"
},
"sdnc-request-header":
{
"svc-action": "reserve",
"svc-notification-url": "http://openecomp.org:8080/adapters/rest/SDNCNotify",
"svc-request-id":"robot20"
},
"vnf-topology-information":
{
"vnf-assignments":
{
"availability-zones":[],
"vnf-networks":[],
"vnf-vms":[]
},
"vnf-parameters":
[
{"vnf-parameter-name":"vfw_private_ip_2","vnf-parameter-value": "10.0.100.4"},
{"vnf-parameter-name":"public_net_id","vnf-parameter-value": "87cdc31f-362f-4bdc-8b50-a7894ed759e9"},
{"vnf-parameter-name":"key_name","vnf-parameter-value":"onapviokey"},
{"vnf-parameter-name":"pub_key","vnf-parameter-value":"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC4CegUDC7k2bqru0KkQ2HzSXZMZJ0cJBizQkt82CZ4Z8RlLFbxNwYhcuI67zEEB3PeVGzw6xsDDo0Su9OT1DxzFsLy14yxWI7+4K0kv/FYKw0ULT7UrBi3sjZI+e65Y/YL7tSZxiPHnPSncBFhMqXZT+WpKJF3BPDIpzbgnvbTH0O1OOQPYmN63Z87Alu8abZKCkClwbdmfl1dnEUoIve1/0f8jZTMC/qO1mQt04s59V7HNQyykZ6POSItH/cgjy3HI7e7gr8E/MseK/LOGu0mVPpcay/FcUKxI+u+sZ/GqY5+1nMQKKVnBWhc5P+cRoMMWjlNs7AiJmrnueAbNDLl Generated-by-Nova"},
{"vnf-parameter-name":"repo_url","vnf-parameter-value":"https://nexus.onap.org/content/sites/raw"}
],
"vnf-topology-identifier":
{
"service-type":"7a9ae3bc-caef-4200-a2f7-2afdbaa41e0d",
"generic-vnf-name":"demo4VFWVNF20",
"generic-vnf-type":"c38867a1-c1b8-422f-8808 0",
"vnf-name":"demo4VFWVNF20-1",
"vnf-type":"C38867a1C1b8422f8808..base_vfw..module-0"
}
}
}
}
17.6 filled JSON vLb Files from our environment
{
"input":
{
"request-information":
{
"notification-url":"openecomp.org",
"order-number":"1",
"order-version":"1",
"request-action":"PreloadVNFRequest",
"request-id": "robot20"
},
"sdnc-request-header":
{
"svc-action": "reserve",
"svc-notification-url": "http://openecomp.org:8080/adapters/rest/SDNCNotify",
"svc-request-id":"robot20"
},
"vnf-topology-information":
{
"vnf-assignments":
{
"availability-zones":[],
"vnf-networks":[],
"vnf-vms":[]
},
"vnf-parameters":
[
{"vnf-parameter-name":"public_net_id","vnf-parameter-value": "aa83b3d9-dda6-4106-b776-9280799993ce"},
{"vnf-parameter-name":"vfw_private_ip_2","vnf-parameter-value": "10.0.100.4"},
{"vnf-parameter-name":"vfw_image_name","vnf-parameter-value": "ubuntu_16.04"},
{"vnf-parameter-name":"key_name","vnf-parameter-value":"onapkey"},
{"vnf-parameter-name":"pub_key","vnf-parameter-value":"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC4CegUDC7k2bqru0KkQ2HzSXZMZJ0cJBizQkt82CZ4Z8RlLFbxNwYhcuI67zEEB3PeVGzw6xsDDo0Su9OT1DxzFsLy14yxWI7+4K0kv/FYKw0ULT7UrBi3sjZI+e65Y/YL7tSZxiPHnPSncBFhMqXZT+WpKJF3BPDIpzbgnvbTH0O1OOQPYmN63Z87Alu8abZKCkClwbdmfl1dnEUoIve1/0f8jZTMC/qO1mQt04s59V7HNQyykZ6POSItH/cgjy3HI7e7gr8E/MseK/LOGu0mVPpcay/FcUKxI+u+sZ/GqY5+1nMQKKVnBWhc5P+cRoMMWjlNs7AiJmrnueAbNDLl Generated-by-Nova"},
{"vnf-parameter-name":"repo_url","vnf-parameter-value":"https://nexus.onap.org/content/sites/raw"}
],
"vnf-topology-identifier":
{
"service-type":"7a9ae3bc-caef-4200-a2f7-2afdbaa41e0d",
"generic-vnf-name":"demo4VFWVNF10",
"generic-vnf-type":"c38867a1-c1b8-422f-8808 0",
"vnf-name":"demo4VFWVNF10-1",
"vnf-type":"C38867a1C1b8422f8808..base_vfw..module-0"
}
}
}
}
18. Go To Portal GUI and From VID - create VF Module
18.a SO↔VIM(Openstack/VIO) - This does not use Multi Cloud
a.1 Cloud-Config.JSON inside /etc/mso/config.d
root@mso:/etc/mso/config.d# cat cloud_config.json
{
"cloud_config":
{
"identity_services":
{
"DEFAULT_KEYSTONE":
{
"identity_url": "KEYSTONE_URL",
"mso_id": "onap",
"mso_pass": "f8cf78bd37b4e258e85076eabb161977",
"admin_tenant": "service",
"member_role": "admin",
"tenant_metadata": true,
"identity_server_type": "KEYSTONE",
"identity_authentication_type": "USERNAME_PASSWORD"
}
},
"cloud_sites":
{
"nova":
{
"region_id": "nova",
"clli": "nova",
"aic_version": "2.5",
"identity_service_id": "DEFAULT_KEYSTONE"
}
}
}
}
18b. SO<->MultiCloud↔(Openstack/VIO ) - This interaction is via MultiCloud
TBConfirmed - MultiCloud Configuration in SO .
{
"cloud_config":
{
"identity_services":
{
"DEFAULT_KEYSTONE":
{
"identity_url": "http://10.0.14.1/api/multicloud/v0/vmware_vio/identity/v2.0",
"mso_id": "onap",
"mso_pass": "f8cf78bd37b4e258e85076eabb161977",
"admin_tenant": "service",
"member_role": "admin",
"tenant_metadata": true,
"identity_server_type": "KEYSTONE",
"identity_authentication_type": "USERNAME_PASSWORD"
}
},
"cloud_sites":
{
"nova":
{
"region_id": "nova",
"clli": "nova",
"aic_version": "2.5",
"identity_service_id": "DEFAULT_KEYSTONE"
}
}
}
}
18.2 registering MultiCloud to AAI-ESR
There are two ways to register a VIM to A&AI
You can register VIM from esr gui http://MSB_SERVER_IP:80/iui/aai-esr-gui/extsys/vim/vimView.html . For the ESR usage detail you can refer to http://onap.readthedocs.io/en/latest/submodules/aai/esr-gui.git/docs/platform/installation.html.
2. Register VIM with the API from A&AI, here is an example
PUT https://A&AI_SERVER_IP:8443/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/ZTE/region-one
Authorization:
header:
body:
{
"cloud-owner": "ZTE",
"cloud-region-id": "region-one",
"cloud-type": "openstack",
"owner-defined-type": "owner-defined-type",
"cloud-region-version": "ocata",
"cloud-zone": "cloud zone",
"complex-name": "complex name",
"sriov-automation": false,
"cloud-extra-info": "cloud-extra-info",
"esr-system-info-list": {
"esr-system-info": [
{
"esr-system-info-id": "432ac032-e996-41f2-84ed-9c7a1766eb29",
"service-url": "http://10.74.151.22:5000/v2.0",
"user-name": "admin",
"password": "admin",
"system-type": "VIM",
"ssl-insecure": true,
"cloud-domain": "cloud-domain"
}
]
}
}
19. vFW Network Topology
20 Additional Step For vFWCL on VIO 20171207-
1- for each of the network - create Router in the horizon .
2 . update /etc/resolve.conf in firewall VM to point to external DNS (10.112.64.1 ) So that VM Can reach out to Open Internet .
3. Check on Horizon under the networks → <Network Name> → Ports to see if the Gateway IP address of the subnet/network is showen as "router:interface"
4 Since we are updating the network given in the sdnc preload - please make sure you login to each VM (Firewall VM , Sink VM and PktGen VM )
a.1 Cloud-Config.JSON inside /etc/mso/config.d 4.1 Login using tenant network and remove every other network .
4.2 once logged into VM update the ip address and cidr files present in /opt/config in each VM
root@mso: 4.3 also update the /etc/mso/config.d# cat cloud_config.jsonnetwork/interfaces files for eth1 , eth2 for Sink and PktGen VM and eth1 ,eth2 , eth3 for Firewall VM .
{ 4.4 attach the Network via Horizon to each of these VM for Firewall VM , try disabling the v_firewall_install.sh and v_firewall_init.sh after running these script onces .
"cloud_config":
{
"identity_services":
{
"DEFAULT_KEYSTONE":
{
5. Sink VM and PktGen VM are generally able to ping on Tenant and ONAP OOM network including Robot VM .
6 Sink VM can ping the protected network gateway .
7. PktGen can ping unprotected network gateway .
8. firewall VM Can not ping Gateway of ONAP OOM .-- Why this is piece of investigation . .
tocompare with 20171205
1. Network Toplogy Example from a successful vFWCL Lab on Openstack /OOM
2. Nothing was done as in doing additional steps .
3. 667 Port was not open on Sink VM in successful vFW Demo case .
21 Additional Step For vLB/ vDNS on VIO 20171207-
1- for each of the network - create Router in the horizon .
2 . update /etc/resolve.conf in firewall VM to point to external DNS So that VMs can reach out to Open Internet .
3. Check on Horizon under the networks → <Network Name> → Ports to see if the Gateway IP address of the subnet/network is showen as "router:interface"
4 Since we are updating the network given in the sdnc preload - please make sure you login to each VM (Load Balancer VM, DNS VM and PktGen VM )
"identity_url": "KEYSTONE_URL", 4.1 Login using tenant network and remove every other network
"mso_id": "onap", 4.2 once logged into VM update the ip address and cidr files present in /opt/config in each VM
4.3 also update the /etc/network/interfaces files for eth1 , eth2 for DNS and PktGen VM and eth1 ,eth2 , eth3 for Load Balancer VM .
"mso_pass": "f8cf78bd37b4e258e85076eabb161977", 4.4 attach the Network via Horizon to each of these VM for Load Balancer VM , try disabling the v_firewall_install.sh and v_firewall_init.sh after running these script onces .
"admin_tenant": "service",
"member_role": "admin",
5. DNS VM and PktGen VM are generally able to ping on Tenant and ONAP OOM network including Robot VM .
6 DNS VM can ping the protected network gateway .
7. PktGen can ping unprotected network gateway .
8. Load Balancer VM Can not ping Gateway of ONAP OOM .-- Why this, is piece of investigation..
22 .TODO – Issues faced from step13 to Step18 and workaround used .
22.1 Challenges faced
"tenant_metadata": true,22.1.1 SDC Sanity Docker keep exiting – Needs to raise a JIRA Ticket for the same .This result into every operation from Portal VID GUI resulting in 500 error or 400 error and no operation succeed .
"identity_server_type": "KEYSTONE",WorkAround
"identity_authentication_type": "USERNAME_PASSWORD"
This is works as designed .Non Issue .
} 22.1.2 SDNC VM "root" becomes 100% full this results into container being unstable and keep exiting - JIRA Ticket raised
}, 22.1.3 Once the SDC is into Issue of 500 or 400 error - The sevices gets into inconsistent state and that requires creating , distributiing the service all over again including customer creation into AAI .
"cloud_sites": 22.1.4 SDNC Login page throwing Error :- "Unable to get database connection :Error :connect ECONNREFUSED 127.0.0.1:3306" . Pls see the screen below
WorkAround
-- remove the SDNC Docker
– restart the SDNC Docker . {
"nova":
{
"region_id": "nova",
"clli": "nova",
"aic_version": "2.5",
"identity_service_id": "DEFAULT_KEYSTONE"
}
}
}
}
18b. SO<->MultiCloud↔(Openstack/VIO ) - This interaction is via MultiCloud
TBConfirmed - MultiCloud Configuration in SO .
{
"cloud_config":
{
"identity_services":
{
"DEFAULT_KEYSTONE":
{
"identity_url": "http://10.0.14.1/api/multicloud/v0/vmware_vio/identity/v2.0",
"mso_id": "onap",
"mso_pass": "f8cf78bd37b4e258e85076eabb161977",
"admin_tenant": "service",
"member_role": "admin",
"tenant_metadata": true,
"identity_server_type": "KEYSTONE",
"identity_authentication_type": "USERNAME_PASSWORD"
}
},
"cloud_sites":
{
"nova":
{
"region_id": "nova",
"clli": "nova",
"aic_version": "2.5",
"identity_service_id": "DEFAULT_KEYSTONE"
}
}
}
}
19 .TODO – Issues faced from step13 to Step18 and workaround used .
19.1 Challenges faced
19.1.1 SDC Sanity Docker keep exiting – Needs to raise a JIRA Ticket for the same .This result into every operation from Portal VID GUI resulting in 500 error or 400 error and no operation succeed .
WorkAround
This is works as designed .Non Issue .
19.1.2 SDNC VM "root" becomes 100% full this results into container being unstable and keep exiting - JIRA Ticket raised
19.1.3 Once the SDC is into Issue of 500 or 400 error - The sevices gets into inconsistent state and that requires creating , distributiing the service all over again including customer creation into AAI .
19.1.4 SDNC Login page throwing Error :- "Unable to get database connection :Error :connect ECONNREFUSED 127.0.0.1:3306" . Pls see the screen below
WorkAround
-- remove the SDNC Docker
– restart the SDNC Docker .
TODO - raise a JIRA Ticket for the SDNC Issue .
19.1.5 SO Complaining about Certificate Error while calling createVfModule . createVfModule fails
017-11-22T13:31:17.150Z|19374e93-7461-4303-8de9-13d105ab519b|keystoneUrl=http://10.110.208.162:5000/v2.0
2017-11-22T13:31:17.478Z|19374e93-7461-4303-8de9-13d105ab519b|heatUrl=https://10.110.209.230:8004/v1/74c7fa9e54f246f5878c902c346e590d, region=nova
2017-11-22T13:31:17.478Z|19374e93-7461-4303-8de9-13d105ab519b|Caching HEAT Client for nova:74c7fa9e54f246f5878c902c346e590d
2017-11-22T13:31:17.478Z|19374e93-7461-4303-8de9-13d105ab519b|Found: com.woorea.openstack.heat.Heat@3ca4e80c
2017-11-22T13:31:17.487Z|19374e93-7461-4303-8de9-13d105ab519b|OpenstackConnectException at:org.openecomp.mso.openstack.utils.MsoHeatUtils.queryHeatStack request:StackResource.GetStack Retry indicated. Attempts remaining:2
2017-11-22T13:31:22.496Z|19374e93-7461-4303-8de9-13d105ab519b|OpenstackConnectException at:org.openecomp.mso.openstack.utils.MsoHeatUtils.queryHeatStack request:StackResource.GetStack Retry indicated. Attempts remaining:1
2017-11-22T13:31:27.508Z|19374e93-7461-4303-8de9-13d105ab519b|OpenstackConnectException at:org.openecomp.mso.openstack.utils.MsoHeatUtils.queryHeatStack request:StackResource.GetStack Retry indicated. Attempts remaining:0
2017-11-22T13:31:32.518Z|19374e93-7461-4303-8de9-13d105ab519b|MSO-RA-9202E Exception communicating with OpenStack: Openstack Heat connection error on QueryAllStack: com.woorea.openstack.base.client.OpenStackConnectException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
2017-11-22T13:31:32.518Z|19374e93-7461-4303-8de9-13d105ab519b|
Solution
picked up the VIO Certifcate from the loadBalance VM
: /usr/local/share/ca-certificates and copied to : /usr/local/share/ca-certificates
inside MSO_TestLab Container .
update-ca-certificates with root inside the mso_testlab docker
19.1.6 ADD VNF Failes From VID GUI with the error – No Valid Catalogue Entry Specified
WorkAround
--- Create a new user via AAI Rest Command and new service using demo.sh init .
- Once the service is successfully distributed Try creating the VNF from VID Gui , It shall succeed
TODO - raise a JIRA Ticket for the SDNC Issue .
22.1.5 SO Complaining about Certificate Error while calling createVfModule . createVfModule fails
017-11-22T13:31:17.150Z|19374e93-7461-4303-8de9-13d105ab519b|keystoneUrl=http://10.110.208.162:5000/v2.0
2017-11-22T13:31:17.478Z|19374e93-7461-4303-8de9-13d105ab519b|heatUrl=https://10.110.209.230:8004/v1/74c7fa9e54f246f5878c902c346e590d, region=nova
2017-11-22T13:31:17.478Z|19374e93-7461-4303-8de9-13d105ab519b|Caching HEAT Client for nova:74c7fa9e54f246f5878c902c346e590d
2017-11-22T13:31:17.478Z|19374e93-7461-4303-8de9-13d105ab519b|Found: com.woorea.openstack.heat.Heat@3ca4e80c
2017-11-22T13:31:17.487Z|19374e93-7461-4303-8de9-13d105ab519b|OpenstackConnectException at:org.openecomp.mso.openstack.utils.MsoHeatUtils.queryHeatStack request:StackResource.GetStack Retry indicated. Attempts remaining:2
2017-11-22T13:31:22.496Z|19374e93-7461-4303-8de9-13d105ab519b|OpenstackConnectException at:org.openecomp.mso.openstack.utils.MsoHeatUtils.queryHeatStack request:StackResource.GetStack Retry indicated. Attempts remaining:1
2017-11-22T13:31:27.508Z|19374e93-7461-4303-8de9-13d105ab519b|OpenstackConnectException at:org.openecomp.mso.openstack.utils.MsoHeatUtils.queryHeatStack request:StackResource.GetStack Retry indicated. Attempts remaining:0
2017-11-22T13:31:32.518Z|19374e93-7461-4303-8de9-13d105ab519b|MSO-RA-9202E Exception communicating with OpenStack: Openstack Heat connection error on QueryAllStack: com.woorea.openstack.base.client.OpenStackConnectException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
2017-11-22T13:31:32.518Z|19374e93-7461-4303-8de9-13d105ab519b|
Solution
picked up the VIO Certifcate from the loadBalance VM
: /usr/local/share/ca-certificates and copied to : /usr/local/share/ca-certificates
inside MSO_TestLab Container .
update-ca-certificates with root inside the mso_testlab docker
22.1.6 ADD VNF Failes From VID GUI with the error – No Valid Catalogue Entry Specified
WorkAround
--- Create a new user via AAI Rest Command and new service using demo.sh init .
- Once the service is successfully distributed Try creating the VNF from VID Gui , It shall succeed .
23. Working with Multi-cloud
- Multi-cloud project provides interfaces to work with a variety of VIMs. When using Multi-cloud its service interfaces are used by the applications instead of VIM interfaces.
- To register your VIM and use it through Multi-cloud interfaces, following need to be done:
- Register AAI services with MSB. Following are the REST Requests to do it:
curl -X POST -H “Content-Type: application/json” -d ‘{“serviceName”: “aai-cloudInfrastructure”, “version”: “v11”, “url”: “/aai/v11/cloud-infrastructure”,”protocol”: “REST”, “enable_ssl”:”true”, “visualRange”:”1”, “nodes”: [ {“ip”: “A&AI_SERVER_IP”,”port”: “8443”}]}’ “http://MSB_SERVER_IP:10081/api/microservices/v1/services“
curl -X POST -H “Content-Type: application/json” -d ‘{“serviceName”: “aai-externalSystem”, “version”: “v11”, “url”: “/aai/v11/external-system”,”protocol”: “REST”, “enable_ssl”:”true”, “visualRange”:”1”, “nodes”: [ {“ip”: “A&AI_SERVER_IP”,”port”: “8443”}]}’ “http://MSB_SERVER_IP:10081/api/microservices/v1/services“ - Register ESR services with MSB. Following are the REST Requests to do it:
curl -X POST -H “Content-Type: application/json” -d ‘{“serviceName”: “aai-esr-server”, “version”: “v1”, “url”: “/api/aai-esr-server/v1”,”protocol”: “REST”, “visualRange”:”1”, “nodes”: [ {“ip”: “ESR_SERVER_IP”,”port”: “9518”}]}’ “http://MSB_SERVER_IP:10081/api/microservices/v1/services“
curl -X POST -H “Content-Type: application/json” -d ‘{“serviceName”: “aai-esr-gui”, “url”: “/esr-gui”,”protocol”: “UI”, “visualRange”:”1”, “path”:”/iui/aai-esr-gui”, “nodes”: [ {“ip”: “ESR_SERVER_IP”,”port”: “9519”}]}’ “http://MSB_SERVER_IP:10081/api/microservices/v1/services“ - Register Multicloud framework services and your VIM specific services with MSB. Following are the REST Requests to do it:
curl -X POST -H “Content-Type: application/json” -d ‘{“serviceName”: “multicloud”, “version”: “v0”, “url”: “/api/multicloud/v0”,”protocol”: “REST”, “nodes”: [ {“ip”: “’$MultiCloud_IP’”,”port”: “9001”}]}’ “http://$MSB_SERVER_IP:10081/api/microservices/v1/services“
curl -X POST -H “Content-Type: application/json” -d ‘{“serviceName”: “multicloud-vio”, “version”: “v0”, “url”: “/api/multicloud-vio/v0”,”protocol”: “REST”, “nodes”: [ {“ip”: “’$MultiCloud_IP’”,”port”: “9004”}]}’ “http://$MSB_SERVER_IP:10081/api/microservices/v1/services“ - Register VIM Information in AAI with region name “vmware” and region id “vio”. Following is the REST Request to do it:
curl -X PUT -H "Authorization: Basic QUFJOkFBSQ==" -H "Content-Type: application/json" -H "X-TransactionId:get_aai_subcr" \
https://aai_resource_docker_host_ip:30233/aai/v01/cloud-infrastructure/cloud-regions/cloud-region/vmware/vio \
- Register AAI services with MSB. Following are the REST Requests to do it:
-d "{
"cloud-owner": "vmware",
"cloud-type": "vmware",
"cloud-region-version": "4.0",
"esr-system-info-list": {
"esr-system-info": [
{
"esr-system-info-id": "123-456",
"system-name": "vim-vio",
"system-type": "vim",
"type": "vim",
"user-name": "admin",
"password": "vmware",
"service-url": "<keystone auth url>",
"cloud-domain": "default",
"default-tenant": "admin",
"ssl-insecure": false
}
]
}
}"
Please note: The IP and port numbers may vary in HEAT vs OOM based ONAP setup. This need to be considered while formulating the curl requests.