Schema

You can think of the JSON as Directed Graph source code and the XML as compiled code. The XML must conform to the schema at https://gerrit.onap.org/r/gitweb?p=ccsdk/sli/core.git;a=blob;f=sli/common/src/main/resources/svclogic.xsd;hb=refs/heads/master. The XML schema reveals what nodes are supported and which attributes are appropriate for each node. This page explains each node in plain English with accompanying code snippets as an alternative to reading the schema file itself.

Supported node types

The following built-in node types are currently supported: Table of ContentsmaxLevel4

Flow Control

Block node

Description

A block node is used to executes a set of nodes.

...

atomic

if true, then if a node returns failure, subsequent nodes will not be executed and nodes already executed will be backed out. If unset it is treated as false.

Parameters

None

Outcomes

None

...

Code Block

<block>
  <record plugin="org.openecomp.sdnc.sli.recording.FileRecorder">
    <parameter name="file" value="/tmp/gamma_r1.log" />
    <parameter name="field1" value="__TIMESTAMP__"/>
    <parameter name="field2" value="RESERVED"/>
    <parameter name="field3" value="$asePort.uni_circuit_id"/>
  </record>
  <return status="success">
    <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
  </return>
</block>circuit_id" />
  </return>
</block>

Break node

Description

A break node is used to break out of a for or while loop.

Attributes

None

Parameters

None

Outcomes

None

Example

Code Block
<break/>

Call node

Description

A call node is used to call another graph

Attributes

module	Module of directed graph to call. If unset, defaults to that of calling graph
rpc	rpc of directed graph to call.
version	version of graph to call, If unset, uses active version.
mode	mode (sync/async) of graph to call. If unset, defaults to that of calling graph.

Parameters

Not applicable

Outcomes

...

success Sub graph returned success
not-found Graph not found
failure Subgraph returned success

Example

...

not found
failure	Subgraph returned success

Example

Code Block
<call rpc="svc-topology-reserve" mode="sync" />

Exit node

Description

An exit node is used to exit a graph without further execution

Attributes

None

Parameters

Not applicable

Outcomes

None

Example

Code Block
<exit/>

For node

Description

A for node provides a fixed iteration looping mechanism, similar to the Java for loop

Attributes

atomic	if true, then if a node returns failure, subsequent nodes will not be executed and nodes already executed will be backed out. If unset it is treated as true.
index	index variable
start	initial value
end	maximum value
silentFailure	Optional boolean, when true for loops will not throw an exception for a null or invalid index. If unset it is treated as false.

Parameters

Not applicable.

Outcomes

Not applicable. The status node has no outcomes.

Example

Info
<for index="i" start="0" end="$network.num-segments"> <set> <parameter name="$vlanlist" value="eval($vlanlist+','+$network.segment[i].provider-segmentation-id)"/> </set> </for>

Return node

Description

A return node is used to return a status to the invoking MD-SAL applicationstatus to the invoking MD-SAL application. The return node does not prevent the execution of subsequent nodes. The status set by the return node is tested by atomic for and block nodes.

Attributes

status

Status value to return (success or failure)

Parameters

The following optional parameters may be passed to convey more detailed status information.

error-code	A brief, usually numeric, code indicating the error condition
error-message	A more detailed error message

Outcomes

Not applicable. The status node has no outcomes.

Example

Info
<return status="failure"> <parameter name="error-code" value="1542" /> <parameter name="error-message" value="Activation failure" /> </return>

Set node

Description

A set node is used to set one or more values in the execution context

Attributes

only-if-unset

If true the set node will only execute if the current value of the target is null

Parameters

Values to be set are passed as parameters

Outcomes

Not applicable. The set node has no outcomes.

Example

Code Block
<set> <parameter name="vlan" value="$network.provider-segmentation-id" /> </set>

Switch node

Description

A switch node is used to make a decision based on its test attribute.

Attributes

test

Condition to test

Parameters

None

Outcomes

Depends on the test condition

Example

Code Block

<switch test="$uni-cir-units">
  <outcome value="Mbps">
    <reserve plugin="org.openecomp.sdnc.sli.resource.gamma.GammaResource"
                         resource="ase-port"
                         key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value"
                         pfx="asePort">

      <outcome value="success">
            <return status="success">
                  <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
                </return>
      </outcome>
      <outcome value="Other">
        <return status="failure">
          <parameter name="error-code" value="1010" />
          <parameter name="error-message" value="No ports found that match criteria" />
        </return>
      </outcome>
    </reserve>
  </outcome>
  <outcome value="Gbps">
    <reserve plugin="org.openecomp.sdnc.sli.resource.gamma.GammaResource"
                         resource="ase-port"
                         key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value*1000"
                         pfx="asePort">

      <outcome value="success">
            <return status="success">
                  <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
                </return>
      </outcome>
      <outcome value="Other">
        <return status="failure">
          <parameter name="error-code" value="1010" />
          <parameter name="error-message" value="No ports found that match criteria" />
        </return>
      </outcome>

...

</reserve>
  </outcome>    
</switch>

While node

Description

A while node is used to create a while loop

Attributes

test	Condition to test
do	Optional boolean, when true the loop executes once regardless of the test condition

Parameters

None

Outcomes

Depends on the test condition

Example

Code Block

Device Management

Configure node

Description

A configure node is used to configure a device.

Attributes

adaptor	Fully qualified Java class of resource adaptor to be used
activate	Activate device/interface, for devices that support a separate activation step.
key	SQL-like string specifying criteria for item to configure

Parameters

Specific to device adaptor.

Outcomes

success	Device successfully configured
not-found	Element to be configured does not exist.
not-ready	Element is not in a state where it can be configured/activated
already-active	Attempt to activate element that is already active
failure	Configure failed for some other reason

Example

Code Block

<configure adaptor="org.openecomp.sdnc.sli.adaptor.emt.EmtAdaptor"
           key="$uni-circuit-id" activate="true">
  <parameter name="circuit.id" value="$uni-circuit-id" />
  <parameter name="subscriber.name" value="$subscriber-name" />
  <parameter name="emt.clli" value="$edge-device-clli" />
  <parameter name="port.tagging" value="$port-tagging" />
  <parameter name="port.mediaSpeed" value="$media-speed" />
  <parameter name="location.state" value="$uni-location-state" />
  <parameter name="location.city" value="$uni-location-city" />
  <parameter name="cosCategory" value="$cos-category" />
  <parameter name="gosProfile" value="$gos-profile" />
  <parameter name="lldp" value="$asePort.resource-lldp" />
  <parameter name="mtu" value="$asePort.resource-mtu" />
  <outcome value="success">
    <block>
      <record plugin="org.openecomp.sdnc.sli.recording.FileRecorder">
        <parameter name="file" value="/tmp/gamma_r1.log" />
        <parameter name="field1" value="__TIMESTAMP__"/>
        <parameter name="field2" value="ACTIVE"/>
        <parameter name="field3" value="$uni-circuit-id"/>
      </record>
      <return status="success">
        <parameter name="edge-device-clli" value="$asePort.resource-emt-clli" />
      </return>
    </block>
  </outcome>
  <outcome value="already-active">
    <return status="failure">
      <parameter name="error-code" value="1590" />
      <parameter name="error-message" value="Port already active" />
    </return>
  </outcome>
  <outcome value="Other">
    <return status="failure">
      <parameter name="error-code" value="1542" />
      <parameter name="error-message" value="Activation failure" />
    </return>
  </outcome>
</configure>

Java Plugin Support

Execute node

Description

An execute node is used to execute Java code supplied as a plugin

Attributes

*** Parameters

plugin	Fully qualified Java class of plugin to be used
method	Name of method in the plugin class to execute. Method must return void, and take 2 arguments: a Map (for parameters) and a SvcLogicContext (to allow plugin read/write access to context memory)
emitsOutcome	Optional boolean value, when true the plugin must return a String which should represent an outcome

Specific to plugin / method

Outcomes

success	Device successfully configured
not-found	Plugin class could not be loaded
unsupported-method	Named method taking (Map, SvcLogicContext) could not be found
failure	Configure failed for some other reason

Example

Code Block

<execute plugin="org.openecomp.sdnc.sli.plugin.HelloWorld"
           method="log">
  <parameter name="message" value="Hello, world!" />
  <outcome value="success">
      <return status="success"/>
  </outcome>
  <outcome value="not-found">
    <return status="failure">
      <parameter name="error-code" value="1590" />
      <parameter name="error-message" value="Could not locate plugin" />
    </return>
  </outcome>
  <outcome value="Other">
    <return status="failure">
      <parameter name="error-code" value="1542" />
      <parameter name="error-message" value="Internal error" />
    </return>
  </outcome>
</execute>

Recording

Record node

Description

A record node is used to record an event. For example, this might be used to log provisioning events.

Attributes

plugin

Fully qualified Java class to handle recording.

Parameters

Parameters will depend on the plugin being used. For the FileRecorder class, the parameters are as follows

file	The file to which the record should be written
field1	First field to write. There will be field parameters for each field to write, from field1 through fieldN. A special value __TIMESTAMP__ may be assigned to a field to insert the current timestamp

Outcomes

success	Record successfully written
failure	Record could not be successfully written

Example

Code Block

<record plugin="org.openecomp.sdnc.sli.recording.FileRecorder">
  <parameter name="file" value="/tmp/gamma_r1.log" />
  <parameter name="field1" value="__TIMESTAMP__"/>
  <parameter name="field2" value="ACTIVE"/>
  <parameter name="field3" value="$uni-circuit-id"/>
</record>

Resource Management

Delete node

Description

A delete node is used to delete a resource from the local resource inventory.

Attributes

plugin	Fully qualified Java class of resource adaptor to be used
resource	Type of resource to delete
key	SQL-like string specifying key to delete

Parameters

None

Outcomes

success	Resource specified deleted successfully.
failure>	Resource specified was not deleted

Example

Code Block

<delete plugin="org.openecomp.sdnc.sli.resource.gamma.GammaResource"
        resource="ase-port"
        key="uni_circuit_id == $uni-circuit-id">
  <outcome value="true">
    <return status="success"/>
  </outcome>
  <outcome value="false">
    <return status="failure"/>
  </outcome>
</delete>

Exists node

Description

An exists node is used to determine whether a particular instance of a resource exists. For example, this might be used to test whether a particular switch CLLI is provisioned.

Attributes

plugin	Fully qualified Java class of resource adaptor to be used
resource	Type of resource to check
key	SQL-like string specifying key to check for

Parameters

None

Outcomes

true	Resource specified exists.
false	Resource specified is unknown

Example

Code Block

<exists plugin="org.openecomp.sdnc.sli.resource.gamma.GammaResource"
        resource="ase-port"
        key="uni_circuit_id == $uni-circuit-id">
  <outcome value="true">
    <return status="success"/>
  </outcome>
  <outcome value="false">
    <return status="failure"/>
  </outcome>
</exists>

Get-resource node

Description

A get-resource node is used to retrieve information about a particular resource and make it available to other nodes in the service logic tree. For example, this might be used to retrieve information about a particular uni-port.

Attributes

plugin	Fully qualified Java class of resource adaptor to be used
resource	Type of resource to retrieve
key	SQL-like string specifying criteria for retrieval
pfx	Prefix to add to context variable names set for data retrieved
select	String to specify, if key matches multiple entries, which entry should take precedence
order-by	Prefix to add to context variable names set for data retrieved

Parameters

None

Outcomes

success	Resource successfully retrieved
not-found	Resource referenced does not exist
failure	Resource retrieve failed for some other reason

Example

Code Block

<get-resource plugin="org.openecomp.sdnc.sli.resource.gamma.GammaResource"
              resource="ase-port"
              key="uni_circuit_id == $uni-circuit-id"
              pfx="current-port">
  <outcome value="success">
    <return status="success"/>
  </outcome>
  <outcome value="not-found">
    <return status="failure"/>
  </outcome>
  <outcome value="failure">
    <return status="failure"/>
  </outcome>
</get-resource>

Is-available node

Description

An is-available node is used to determine whether a particular type of resource is available. For example, this might be used to test whether any ports are available for assignment on a particular switch.

Attributes

plugin	Fully qualified Java class of resource adaptor to be used
resource	Type of resource to check
key	SQL-like string specifying key to check for
pfx	Prefix to add to context variable names set for data retrieved

Parameters

None

Outcomes

true	Resource requested is available
false	Resource requested is not available

Example

Code Block

<is-available plugin="org.openecomp.sdnc.sli.resource.gamma.GammaResource"
              resource="ase-port"
              key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value">
  <outcome value="true">
    <return status="success"/>
  </outcome>
  <outcome value="false">
    <return status="failure"/>
  </outcome>
</is-available>

Notify node

Description

A notify node is used to inform an external application (e.g. A&AI) that a resource was updated.

Attributes

plugin	Fully qualified Java class of resource adaptor to be used
resource	Identifies resource that was updated
action	Action that triggered notification to be sent (ADD/UPDATE/DELETE)

Parameters

None

Outcomes

success	Notification was successful
failure	Notification failed is not available

Example

Code Block

<notify plugin="org.openecomp.sdnc.sli.resource.gamma.GammaResource"
              resource="ase-port"
              action="ADD">
  <outcome value="success">
    <return status="success"/>
  </outcome>
  <outcome value="Other">
    <return status="failure"/>
  </outcome>
</notify>

Release node

Description

A release node is used to mark a resource as no longer in use, and thus available for assignment.

Attributes

plugin	Fully qualified Java class of resource adaptor to be used
resource	Type of resource to release
key	SQL-like string specifying key to check of resource to release

Parameters

None

Outcomes

success	Resource successfully released
not-found	Resource referenced does not exist
failure	Resource release failed for some other reason

Example

Code Block

<release plugin="org.openecomp.sdnc.sli.resource.gamma.GammaResource"
         resource="ase-port"
         key="uni_circuit_id == $uni-circuit-id">
  <outcome value="success">
    <return status="success"/>
  </outcome>
  <outcome value="not-found">
    <return status="failure"/>
  </outcome>
  <outcome value="failure">
    <return status="failure"/>
  </outcome>
</release>

Reserve node

Description

A reserve node is used to reserve a particular type of resource.. For example, this might be used to reserve a port on a particular switch.

Attributes

plugin	Fully qualified Java class of resource adaptor to be used
resource	Type of resource to reserve
key	SQL-like string specifying criteria for reservation
select	String to specify, if key matches multiple entries, which entry should take precedence

Parameters

None

Outcomes

success	Resource requested was successfully reserved
failure	Resource requested was not successfully reserved

Example

Code Block

<reserve plugin="org.openecomp.sdnc.sli.resource.gamma.GammaResource"
         resource="ase-port"
         key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value"
         select="min(speed)">
  <outcome value="success">
    <return status="success"/>
  </outcome>
  <outcome value="failure">
    <return status="failure"/>
  </outcome>
</reserve>

Save node

Description

A save node is used to save information about a particular resource to persistent storage. For example, this might be used to save information about a particular uni-port.

Attributes

plugin	Fully qualified Java class of resource adaptor to be used
resource	Type of resource to save
key	SQL-like string specifying criteria for retrieval
force	If "true", save resource even if this resource is already stored in persistent storage
pfx	Prefix to be prepended to variable names, when attributes are set in SvcLogicContext

Parameters

Values to save (columns) are specified as parameters, with each name corresponding to a column name and each value corresponding to the value to set.

Outcomes

success	Resource successfully saved
failure	Resource save failed

Example

Code Block

<save plugin="`$gamma-resource-plugin`" resource="vnf"
        key="vnf-name = $requests.vnf.vnf-name" force="true"
        pfx="requests.vnf">
        <parameter name="vnf-name"
                value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" />
        <parameter name="vnf-type" value="vce" />
        <parameter name="orchestration-status" value="pending-create" />
        <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" />
        <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" />
        <parameter name="availability-zone"
                value="`$aic-availability-zone.availability-zone`" />
        <parameter name="aic-site-id" value="`$requests.vnf.aic-site-id`" />
        <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" />
</save>

Update node

Description

An update node is used to update information about a particular resource to persistent storage.

Attributes

plugin	Fully qualified Java class of resource adaptor to be used
resource	Type of resource to update
key	SQL-like string specifying criteria for retrieval
pfx	Prefix to be prepended to variable names, when attributes are set in SvcLogicContext

Parameters

Values to save (columns) are specified as parameters, with each name corresponding to a column name and each value corresponding to the value to set.

Outcomes

success	Resource successfully saved
failure	Resource save failed

Example

Code Block

<update plugin="`$gamma-resource-plugin`" resource="vnf"
        key="vnf-name = $requests.vnf.vnf-name"
        pfx="requests.vnf">
        <parameter name="vnf-name"
                value="`$requests.cust-country-code + $requests.cust-id + $requests.cust-city + $requests.cust-state + '001VCE'`" />
        <parameter name="vnf-type" value="vce" />
        <parameter name="orchestration-status" value="pending-create" />
        <parameter name="heat-stack-id" value="`$requests.heat-stack-id`" />
        <parameter name="mso-catalog-key" value="`$requests.mso-catalog-key`" />
        <parameter name="availability-zone"
                value="`$aic-availability-zone.availability-zone`" />
        <parameter name="aic-site-id" value="`$requests.vnf.aic-site-id`" />
        <parameter name="oam-ipv4-address" value="`$vce-ipv4-oam-addr.ipv4-addr`" />
</update>

...

success	Sub graph returned success
not-found	Graph not found
failure	Subgraph returned success

Page Comparison

Versions Compared

Old Version 7

New Version Current

Key

Table Of Contents

Schema

Supported node types

Flow Control

Block node

Description

Parameters

Outcomes

Break node

Description

Attributes

Parameters

Outcomes

Example

Call node

Description

Attributes

Parameters

Outcomes

successSub graph returned successnot-foundGraph not foundfailureSubgraph returned success

Example

Example

Exit node

Description

Attributes

Parameters

Outcomes

Example

For node

Description

Attributes

Parameters

Outcomes

Example

Return node

Description

Attributes

Parameters

Outcomes

Example

Set node

Description

Attributes

Parameters

Outcomes

Example

Switch node

Description

Attributes

Parameters

Outcomes

Example

While node

Description

Attributes

Parameters

Outcomes

Example

Device Management

Configure node

Description

Attributes

Parameters

Outcomes

Example

Java Plugin Support

Execute node

Description

Attributes

Outcomes

Example

Recording

Record node

Description

Attributes

success Sub graph returned success
not-found Graph not found
failure Subgraph returned success