Page Comparison

This page shows the differences between the current clean version model with ETSI IFA011 v2.4.3This page shows the differences between the current clean version model with ETSI IFA011 v2.5.1 and other proposed changes:

Meaning of color coding: BOLD RED implies it is a change to make to the Vnfd model for R4. BOLD BLUE indicates an enhancement ONAP has made and would like to propose back to the ETSI community. BOLD PURPLE represents candidates for deprecation in support of HPA.
The original tables came from R2 CLEAN and not from Papyrus.
Verified against IFA011 v2.

...

5.1 and IFA015 v2.

...

5.1
Added "Attribute Type" column to indicate whether the class attribute is an "attribute" or member end of an "association". Without this information it is difficult to create a class diagram. We might want to consider also for those "Attribute Types" that are associations to put whether there is shared or composite aggregation, or no aggregation at all. Note: This will not be necessary when model is put into Papyrus, as all associations will start with "_"
Changed attribute Applied Stereotypes to

...

represent the actual stereotypes being applied, and not just a property of a stereotype. Note: When the model is in Papyrus, GenDoc will output this field correctly.
Added class definitions and applied stereotypes

...

Table of Contents

printable	false

...

. Note: GenDoc will do this correctly when the model is in Papyrus.
Proposal to define actual enums and not use the general term "Enum". Make sure the model captures these correctly in Papyrus.
Proposal to remove incorrect usage of valueRange in OpenModelAttribute stereotype. Make sure this is not incorrectly propagated to Papyrus.

Table of Contents

printable	false

Class: Vnfd

A VNFD is a deployment template which describes a VNF in terms of deployment and operational behaviour requirements. It also contains connectivity, interface and virtualised resource requirements.

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

...

Take out the following as it is not relevant to the info model: References: tosca-nfv-YAML-v1.0-wd05-rev02 (tosca.nodes.nfv.vnfd, but node details are not defined) ETSI GS NFV-IFA 011 V2.1.3 (VNFD)

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
vnfdId	Identifier	1	Identifier of this VNFD information element. This attribute shall be globally unique. NOTE: The VNFD Identifier shall be used as the unique identifier of the VNF Package that contains this VNFD. Any modification of the content of the VNFD or the VNF Package shall result in a new VNFD Identifier.	OpenModelAttribute isInvariant: true support: MANDATORY	attribute
vnfProvider	String	1	Provider of the VNF and of the VNFD.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfProductName	String	1	Name to identify the VNF Product. Invariant for the VNF Product lifetime.	OpenModelAttribute isInvariant: true support: MANDATORY	attribute
vnfSoftwareVersion

String

Version

1

Software version of the VNF. This is changed when there is any change to the software that is included in the VNF Package.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

vnfdVersion

String

Version	1	Identifies the version of the VNFD.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfProductInfoName	String	0..1	Human readable name for the VNF Product. Can change during the VNF Product lifetime.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfProductInfoDescription	String	0..1	Human readable description of the VNF Product. Can change during the VNF Product lifetime.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfmInfo	String	0..

N

*

Identifies VNFM(s) compatible with the VNF described in this version of the VNFD.

OpenModelAttribute

isInvariant: false
support: MANDATORY
valueRange: use the name of micro-service of the vnfm drive. For vendor specific VNFM, the value composes of "vendorname" and "vnfmdriver", e.g. "mycompanyvnfmdriver"; for generic VNFM, the value is "gvnfmdriver".
Remove this from the valueRange and put in the description.

attribute

localizationLanguage

String

0..

N

*

Information about localization languages of the VNF (includes e.g. strings in the VNFD).

NOTE: This allows to provide one or more localization languages to support selecting a specific localization language at VNF instantiation time.

OpenModelAttribute

isInvariant: false
support: MANDATORY
valueRange: refer to ISO936 https://www.iso.org/iso-639-language-codes.html

Remove this from the valueRange and put in the description.

attribute

defaultLocalizationLanguage

String

0..1

Default localization language that is instantiated if no information about selected localization language is available.

OpenModelAttribute

isInvariant: false
support: CONDITIONAL-MANDATORY
valueRange: refer to ISO936 https://www.iso.org/iso-639-language-codes.html
Remove this from the valueRange and put in the description.
condition: Shall be present if "localizationLanguage" is present and shall be absent otherwise.

attribute

vdu

Vdu

1..

N

*

Virtualisation Deployment Unit.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

virtualComputeDesc

VirtualComputeDesc

1..

N

*

Defines descriptors of virtual compute resources to be used by the VNF.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

virtualStorageDesc

VirtualStorageDesc

0..

N

*

Defines descriptors of virtual storage resources to be used by the VNF.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

IN IFA 011 but not in clean

swImageDesc

SwImageDesc

0..

N

*

Defines descriptors of software images to be used by the VNF.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

intVirtualLinkDesc

VnfVirtualLinkDesc

0..

N0..N

*

Represents the type of network connectivity mandated by the VNF provider between two or more CPs which includes at least one internal CP.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

vnfReservedCpdVduCpd

IN IFA 011 but not in clean

securityGroupRule

Note: As this is not in the SOL001 v2.5.1 data model, propose that this NOT be added unless requested.

SecurityGroupRule (not sure if this is datatype or class, as it is not in the model.)

0..*

Defines security group rules to be used by the VNF. (See definition of SecurityGroupRule in IFA011 v2.5.1)

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

vnfReservedCpd

VduCpd

0..*

Reserved IP Address for VNF which is not bounded to any specific VNFC, but assigned manually from outside and potentially shared as a floating IP among VNFCs.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

vnfExtCpd

VnfExtCpd

1..

N

*

Describes external interface(s) exposed by this VNF enabling connection with a VL.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

deploymentFlavour

VnfDf

1..

N

*

Describes specific DF(s) of a VNF with specific requirements for capacity and performance.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

configurableProperties

VnfConfigurableProperties

0..1

Describes the configurable properties of the VNF (e.g. related to auto scaling and auto healing).

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

modifiableAttributes

VnfInfoModifiableAttributes

1 (IFA has 0..1)

Describes the modifiable attributes of the VNF.

Editor's note: need check the usage of this attribute

OpenModelAttribute

isInvariant:

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

lifeCycleManagementScript

VnfLifeCycleManagementScript

0..

N

*

Includes a list of events and corresponding management scripts performed for the VNF.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

NOTE: This is "obsolete" in IFA011 v2.5.1, so mark it as "obsolete"

Remove it, from diagram too.

elementGroup

VnfdElementGroup

0..

N

*

Describes the associated elements of a VNFD for a certain purpose during VNF lifecycle management.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

vnfIndicator

VnfIndicator

0..

N

*	Declares the VNF indicators that are supported by this VNF.	OpenModelAttribute isInvariant: false support: MANDATORY	assocation
logo	String	0..1	File path of the vendor specified logo.	*OpenModelAttribute* isInvariant: false support: MANDATORY	attribute
guide	String	0..1	UUID of the vendor guide/documentation which is attached to VNF and can be downloaded from the model.	*OpenModelAttribute* isInvariant: false support: MANDATORY	attribute
IN IFA 011 but not in clean autoScale Note: Not in data model IFA001 V2.5.1 so recommend not to add this	Rule	0..

N

*

Rule that determines when a scaling action needs to be triggered on a VNF instance e.g. based on certain VNF indicator values or VNF indicator value changes or a combination of VNF indicator value(s) and monitoring parameter(s).

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

Class: Vdu

The Virtualisation Deployment Unit (VDU) is a construct supporting the description of the deployment and operational behaviour of a VNFC.

A VNFC instance created based on the VDU maps to a single virtualisation container (e.g.; a VM). Remove the following as not relevant to the info model: References: tosca-nfv-YAML-v1.0-wd05-rev02 ETSI GS NFV-IFA 011 V2.1.3

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
vduId	Identifier	1	Unique identifier of this Vdu in VNFD.	OpenModelAttribute isInvariant: true support: MANDATORY	attribute
name	String	1	Human readable name of the Vdu.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
description	String	1	Human readable description of the Vdu.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
intCpd	VduCpd	1..

N

*	Describes network connectivity between a VNFC instance (based on this Vdu) and

an

a Virtual Link (VL).

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

virtualComputeDesc

Identifier (reference to VirtualComputeDesc)

Info model has type: VirtualComputeDesc which makes more sense because this is an association member end.

1

Describes CPU, Memory and acceleration requirements of the Virtualisation Container realising this Vdu.

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

association

virtualStorageDesc

Identifier (reference to VirtualStorageDesc)

Info model has type: VirtualStorageDesc which makes more sense because this is an association member end.

0..

N

*

Describes storage requirements for a VirtualStorage instance attached to the virtualisation container created from virtualComputeDesc defined for this Vdu.

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

association

bootOrder

KeyValuePair

0..

N

*	Boot order of valid boot devices. (lowest index defines highest boot priority). NOTE: If no boot order is defined the default boot order defined in

the VIM or NFVI shall be used

the VIM or NFVI shall be used.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: "key/name" indicates the the boot index "value" references a descriptor from which a valid boot device is created e.g. VirtualStorageDesc from which a VirtualStorage instance is created. Remove this from valueRange and put in description.	attribute
swImageDesc	SwImageDesc (in model) This is member end of an association.	0..1	Describes the software image which is directly loaded on the virtualisation container realising this Vdu. NOTE: More software images can be attached to the virtualisation container using VirtualStorage resources.	OpenModelAttribute isInvariant: false support: MANDATORY *PassedByReference*	association
nfviConstraint	KeyValuePair	0..*	Describes constraints on the NFVI for the VNFC instance(s) created from this Vdu. For example, aspects of a secure hosting environment for the VNFC instance that involve additional entities or processes. NOTE: These are constraints other than stipulating that a VNFC instance has access to a certain resource, as a prerequisite to instantiation. The attributes virtualComputeDesc and virtualStorageDesc define the resources required for instantiation of the VNFC instance.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: "key/name" includes "AvailabilityZone", "HostAggregates". Remove from valueRange and put in description.	attribute
monitoringParameter	MonitoringParameter	0..*	Defines the virtualised resources monitoring parameters on VDU level.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
configurableProperties	VnfcConfigurableProperties	1	Describes the configurable properties of all VNFC instances based on this VDU.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
New in IFA011 v2.5.1 bootData	String	0..1	Contains a string or a URL to a file contained in the VNF package used to customize a virtualised compute resource at boot time. The bootData may contain variable parts that are replaced by deployment specific values before being sent to the VIM.	*OpenModelAttribute* isInvariant: false support: MANDATORY	attribute
injectFiles	String	0..*	Describes the information (e.g. URL) about the scripts, config drive metadata, etc. which can be used during Vdu booting process.	*OpenModelAttribute* isInvariant: false support: MANDATORY	attribute

Class: SwImageDesc

This information element describes the software image for a particular VDU or a virtual storage resource. Remove: References: tosca-nfv-YAML-v1.0-wd05-rev02 ETSI GS NFV-IFA 011 V2.1.3

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

id

Identifier

1

The identifier of this software image.

OpenModelAttribute

isInvariant:

falseattributeswImageDesc

SwImageDesc (in model)

IFA 011 has Identifier

0..1

Editor's note: the scenario of using "0" needs to be clarified.

Describes the software image which is directly loaded on the virtualisation container realising this Vdu.

NOTE: More software images can be attached to the virtualisation container using VirtualStorage resources

true
support: MANDATORY

valueRange: "key/name" indicates the the boot index "value" references a descriptor from which a valid boot device is created e.g. VirtualStorageDesc from which a VirtualStorage instance is created.

attribute

name

String

1

The name of this software image.

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

attribute

association

version

nfviConstraintKeyValuePair0..N

Describes constraints on the NFVI for the VNFC instance(s) created from this Vdu. For example, aspects of a secure hosting environment for the VNFC instance that involve additional entities or processes.

NOTE: These are constraints other than stipulating that a VNFC instance has access to a certain resource, as a prerequisite to instantiation. The attributes virtualComputeDesc and virtualStorageDesc define the resources required for instantiation of the VNFC instance

String

Should this be Version?

1

The version of this software image.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

checksum

String

1

The checksum of the software image file.

OpenModelAttribute

isInvariant: false
support: MANDATORY

valueRange: "key/name" includes "AvailabilityZone", "HostAggregates".

attributemonitoringParameterMonitoringParameter0..NDefines the virtualised resources monitoring parameters on VDU level

	attribute
containerFormat	String	1	The container format describes the container file format in which software image is provided.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
diskFormat	String	1	The disk format of a software image is the format of the underlying disk image.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
minDisk	Number

configurablePropertiesVnfcConfigurableProperties1Describes the configurable properties of all VNFC instances based on this VDU

1

The minimal disk size requirement for this software image. The value of the "size of storage" attribute of the VirtualStorageDesc referencing this SwImageDesc shall not be smaller than the value of minDisk.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

injectFiles

minRam

String

Number

0..

NDescribes the information (e.g. URL) about the scripts, config drive metadata, etc. which can be used during Vdu booting process

1

The minimal RAM requirement for this software image. The value of the "size" attribute of VirtualMemoryData of the Vdu referencing this SwImageDesc shall not be smaller than the value of minRam.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

Class: SwImageDesc

This information element describes the software image for a particular VDU or a virtual storage resource.

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

Attribute NameTypeMultiplicityDescriptionApplied StereotypesAttribute TypeidIdentifier1The identifier of this software image

size

Number

1

The size of this software image.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

swImage

Identifier (Reference to a SwImage)

Model has type SwImage which makes more sense because this is a member end of an association

1

This is a reference to the actual software image. The reference can be relative to the root of the VNF Package or can be a URL.

OpenModelAttribute

isInvariant:

true

false
support: MANDATORY

PassedByReference

attribute

association

name

operatingSystem

String

1The name of this software image.

0..1

Identifies the operating system used in the software image. This attribute may also identify if a 32 bit or 64 bit software image is used. Remove "support:"

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

version

supportedVirtualisationEnvironment

String

1The version of

0..*

Identifies the virtualisation environments (e.g. hypervisor) compatible with this software image.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

checksumString1The checksum of the software image file.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attributecontainerFormatString1The container format describes the container file format in which software image is provided.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attributediskFormatString1The disk format of a software image is the format of the underlying disk image

Class: VirtualComputeDesc

The VirtualComputeDesc class supports the specification of requirements related to virtual compute resources.

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

virtualComputeDescId

Identifier

1

Unique identifier of this VirtualComputeDesc in the VNFD.

OpenModelAttribute

isInvariant:

false

true
support:

MANDATORY

attribute

minDiskNumber (recommended DM type: Scalar-Unit-Size)1The minimal disk size requirement for this software image. The value of the "size of storage" attribute of the VirtualStorageDesc referencing this SwImageDesc shall not be smaller than the value of minDisk

logicalNode

LogicalNodeRequirements

0..*

The logical Node requirements.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

association

minRamNumber (recommended DM type: Scalar-Unit-Size)

requestAdditionalCapabilities

RequestedAdditionalCapabilityData

0..

1The minimal RAM requirement for this software image. The value of the "size" attribute of VirtualMemoryData of the Vdu referencing this SwImageDesc shall not be smaller than the value of minRam

*

Specifies requirements for additional capabilities. These may be for a range of purposes. One example is acceleration related capabilities.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

sizeNumber (recommended DM type: Scalar-Unit-Size)1The size of this software imageThis is a reference to the actual software image. The reference can be relative to the root of the VNF Package or can be a URL

computeRequirements

KeyValuePair

0..*

Specifies compute requirements.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

swImage

Identifier (Reference to a SwImage)

Model has type SwImage which makes more sense because this is a member end of an association

1

virtualMemory

VirtualMemoryData

1

The virtual memory of the virtualised compute.

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

attribute

association

virtualCpu

operatingSystem0..

VirtualCpuData

String

1

Identifies the operating system used in the software image. This attribute may also identify if a 32 bit or 64 bit software image is used.String

The virtual CPU(s) of the virtualised compute.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

New in IFA011

supportedVirtualisationEnvironment

virtualDisk

BlockStorageData (need to create this new datatype)

0..

NIdentifies the virtualisation environments (e.g. hypervisor) compatible with this software image.

*

The local or ephemeral disk(s) of the virtualized compute.

Experimental

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

...

Datatype:

...

VirtualCpuData

The VirtualComputeDesc class VirtualCpuData information element supports the specification of requirements related to virtual compute resources.

Applied Stereotypes:

OpenModelClass

support: MANDATORY

...

CPU(s) of a virtual compute resource.

Applied Stereotypes:

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes

Attribute TypevirtualComputeDescIdIdentifier1Unique identifier of this VirtualComputeDesc in the VNFD

cpuArchitecture

String

0..1

CPU architecture type. Examples are x86, ARM. The cardinality can be 0 during the allocation request, if no particular CPU architecture type is requested.

OpenModelAttribute

isInvariant: false
support: MANDATORY

numVirtualCpu

Integer

1

Number of virtual CPUs.

OpenModelAttribute

isInvariant:

true

false
support: MANDATORY

attribute

virtualCpuClock

logicalNodeLogicalNodeData1..NThe logical Node requirements

Number

0..1

Minimum virtual CPU clock rate (e.g. in MHz). The cardinality can be 0 during the allocation request, if no particular value is requested.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

virtualCpuOversubscriptionPolicy

requestAdditionalCapabilitiesRequestedAdditionalCapabilityData

0..

NSpecifies requirements for additional capabilities. These may be for a range of purposes. One example is acceleration related capabilities

1

The CPU core oversubscription policy e.g. the relation of virtual CPU cores to physical CPU cores/threads. The cardinality can be 0 during the allocation request, if no particular value is requested.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

vduCpuRequirements

computeRequirements

KeyValuePair

0..

NSpecifies compute requirements.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attributevirtualMemory

VirtualMemoryData

1The virtual memory of the virtualised compute

*

Array of key-value pair requirements on the Compute (CPU) for the VDU.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attributevirtualCpu

virtualCpuPinning

VirtualCpuData

VirtualCpuPinningData

0..1

The virtual CPU

(s) of

pinning configuration for the virtualised compute resource.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

Datatype:

...

VirtualMemoryData

The VirtualCpuData VirtualMemoryData information element supports the specification of requirements related to virtual CPU(s) memory of a virtual compute resource.

Applied Stereotypes:

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes

cpuArchitecture

virtualMemSize

String

Number

0..1CPU architecture type. Examples are x86, ARM. The cardinality can be 0 during the allocation request, if no particular CPU architecture type is requested.

OpenModelAttribute

isInvariant: false
support: MANDATORY

numVirtualCpuInteger1Number of virtual CPUs.

OpenModelAttribute

isInvariant: false
support: MANDATORY

virtualCpuClockNumber(recommended DM type: Scalar-Unit-Freq)0..1Minimum virtual CPU clock rate

1	Amount of virtual Memory (e.g. in

MHz). The cardinality can be 0 during the allocation request, if no particular value is requestedString

MB).	OpenModelAttribute isInvariant: false support: MANDATORY

virtualCpuOversubscriptionPolicy

virtualMemOversubscriptionPolicy

0..1

The

CPU

memory core oversubscription policy

e.g. the relation

in terms of virtual

CPU cores

memory to physical

CPU cores/threads

memory on the platform. The cardinality can be 0 during the allocation request, if no particular value is requested.

OpenModelAttribute

isInvariant: false
support: MANDATORY

vduCpuRequirements

vduMemRequirements

KeyValuePair

0..

N

*	Array of key-value pair requirements on the

Compute (CPU)

memory for the VDU.

OpenModelAttribute

isInvariant: false
support: MANDATORY

virtualCpuPinning

numaEnabled

VirtualCpuPinningData

Boolean

0..1

The virtual CPU pinning configuration for the virtualised compute resource

It specifies the memory allocation to be cognizant of the relevant process/core allocation. The cardinality can be 0 during the allocation request, if no particular value is requested.

OpenModelAttribute

isInvariant: false
support: MANDATORY

editor's note: need to check whether can be optional

Datatype: VirtualMemoryData

...

Class: VirtualStorageDesc

The VirtualStorageDesc information element supports the specification specifications of requirements related to virtual memory of a virtual compute resourcepersistent virtual storage resources. Ephemeral virtual storage is specified in VirtualComputeDesc information element.

Applied Stereotypes:

...

OpenModelClass

support: MANDATORY

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
virtualMemSize	Number (recommended DM type: Scalar-Unit-Size) id	Identifier	1	Amount of virtual Memory (e.g. in MB) Unique identifier of this VirtualStorageDesc in the VNFD.	OpenModelAttribute isInvariant: falsetrue support: MANDATORY
virtualMemOversubscriptionPolicy	String	0..1	The memory core oversubscription policy in terms of virtual memory to physical memory on the platform. The cardinality can be 0 during the allocation request, if no particular value is requested.	OpenModelAttribute isInvariant: false support: MANDATORY
vduMemRequirements	KeyValuePair	0..N	Array of key-value pair requirements on the memory for the VDU.attribute
typeOfStorage	StorageType (enum with values: BLOCK, OBJECT, FILE)	1	Type of virtualised storage resource (e.g. BLOCK, OBJECT, FILE)	*Experimental* OpenModelAttribute isInvariant: false support: MANDATORY	numaEnabledattribute
Boolean	0..1	It specifies the memory allocation to be cognisant of the relevant process/core allocation. The cardinality can be 0 during the allocation request, if no particular value is requestedsizeOfStorage DELETED in IFA011 v2.5.1. Should we keep this and mark as "Obsolete"?	Number	1	Size of virtualised storage resource (e.g. size of volume, in GB).	OpenModelAttribute isInvariant: false support: MANDATORY

Class: VirtualStorageDesc

The VirtualStorageDesc class supports the specifications of requirements related to virtual storage resources.

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

Unique identifier of this VirtualStorageDesc in the VNFD trueType of virtualised storage resource
(e.g. volume, object).

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
id	Identifier	1		attribute
vduStorageRequirements This is moved to BlockStorageData	KeyValuePair	0..*	An array of key-value pairs that articulate the storage deployment requirements.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
rdmaEnabled This is moved to BlockStorageData	Boolean	0..1	Indicate if the storage support RDMA.	OpenModelAttribute isInvariant:	false support: MANDATORY	attribute	typeOfStorage	String	1
swImageDesc This is moved to BlockStorageData	Identifier (Reference to SwImageDesc) In info model type is SwImageDesc which makes sense as this is an association member end	0..1	Software image to be loaded on the VirtualStorage resource created based on this VirtualStorageDesc.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute	sizeOfStorage	Number (recommended DM type: Scalar-Unit-Size)	1	Size of virtualised storage resource (e.g. size of volume, in GB). PassedByReference	association
New in IFA011 blockStorageData	BlockStorageData (new datatype to be created)	0..1	Specifies the details of block storage. It shall be present when the "typeOfStorage" attribute is set to "BLOCK". It shall be absent otherwise.	*Experimental* *OpenModelAttribute* isInvariant: false support: MANDATORY	attribute
New in IFA011	vduStorageRequirements	KeyValuePair objectStorageData	ObjectStorageData (new datatype to be created)	0..N	An array of key-value pairs that articulate the storage deployment requirements.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute	rdmaEnabled	Boolean	0..1	Indicate if the storage support RDMA.1	Specifies the details of object storage. It shall be present when the "typeOfStorage" attribute is set to "OBJECT". It shall be absent otherwise.	*Experimental* *OpenModelAttribute* isInvariant: false support: MANDATORY	attribute
swImageDesc	Identifier (Reference to SwImageDesc) In info model type is SwImageDesc which makes sense as this is an association member end	0..1	Software image to be loaded on the VirtualStorage resource created based on this VirtualStorageDesc. New in IFA011 fileStorageData	FileStorageData (new datatype to be created)		Specifies the details of file storage. It shall be present when the "typeOfStorage" attribute is set to "FILE". It shall be absent otherwise.	*Experimental* *OpenModelAttribute* isInvariant: false support: MANDATORY PassedByReference	association

...

attribute

Class: LogicalNodeData NOTE: In IFA011 v2.5.1 this is changed to class LogicalNodeRequirements

This information element describes compute, memory and I/O requirements that are to be associated with the logical node of infrastructure. The logical node requirements are a sub-component of the VDU level requirements. As an example for illustration purposes, a logical node correlates to the concept of a NUMA cell in libvirt terminology.

...

logicalNodeRequirements

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

New in IFA011

id

Identifier

1

Identifies this set of logical node requirements.

OpenModelAttribute

isInvariant: true
support: MANDATORY

logicalNodeRequirementDetail

KeyValuePair

01..N*

The logical node-level compute, memory and I/O requirements. An array of key-value pairs that articulate the deployment requirements.

This could include the number of CPU cores on this logical node, a memory configuration specific to a logical node (e.g. such as available in the Linux kernel via the libnuma library) or a requirement related to the association of an I/O device with the logical node.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Class: Cpd

The Cpd class specifies the characteristics of connection points attached to NFs and NSs. This is an abstract class used as parent for the various Cpd classes.

Note 1: the description of this class are is different in ETSI GS NFV IFA 011 and ETSI GS NFV IFA 014. The present definition uses the definition in ETSI GS NFV IFA 014 as it is the more general.

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
cpdId	Identifier	1	Identifier of this Cpd information element.	OpenModelAttribute isInvariant: true support: MANDATORY	attribute
In IFA 011 and model but not in clean: layerProtocol	Enum Model has type LayerProtocol	1..N	Identifies which protocol the CP uses for connectivity purposes (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire, etc.).	*OpenModelAttribute* isInvariant: false support: MANDATORY	attribute
cpRole In model this is called cpdRole to distinguish it from a cpRole	String	0..1	Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS. For example a VNF with a tree flow pattern within the VNF will have legal cpRoles of ROOT and LEAF.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
description	String	0..1	Provides human-readable information on the purpose of the CP (e.g. CP for control plane traffic).	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
cpProtocol	CpProtocolData	1..N	Identifies the protocol layering information the CP uses for connectivity purposes and associated information. There shall be one cpProtocol for each layer protocol as indicated by the attribute layerProtocol.Editor's note: the attribute "layerProtocol" still needs further discussion. . The info model has layerProtocol and has moved cpProtocol to sub-classes. Note: For now keep cpProtocol in Cpd.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
trunkMode	Boolean	1	Information about whether the CP instantiated from this CPD is in Trunk mode (802.1Q or other).	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
New in IFA011 v2.5.1 securityGroupRuleId Note: not added in the model for R4	Identifier (reference to SecurityGroupRule	0..*	Reference of the security group rules bound to this CPD.	*OpenModelAttribute* isInvariant: false support: MANDATORY	attribute or association?
allowedAddressData Note: propose to move this out of common definition of Cpd as it is specific to VNFD.	AddressData	0..N	For specifying floating IP(s) to be shared among Cpds, which are reserved for vnfReservedCpd described in the VNFD.	*OpenModelAttribute* isInvariant: false support: MANDATORY	attribute

Class: VduCpd

Describes network connectivity between a VNFC instance (based on this VDU) and an internal Virtual Link.

...

support: MANDATORY

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
bitrateRequirement	Number

(recommended DM type: Scalar-Unit-Rate)

0..1

Bitrate requirement on this CP.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

vnicName

String

0..1

Describes the name of the vNIC this CP attaches to, e.g. eth0. It will be configured during the Vdu booting process.

OpenModelAttribute

isInvariant: false
support: MANDATORY

attribute

vnicOrder (see newly added attribute below "order" to see if it could replace this)

Integer

0..1

Describes the order to create the vNIC within the scope of this Vdu.

OpenModelAttribute

isInvariant: false
support:

MANDATORYattribute

vnicType

Enum

MANDATORY

attribute

vnicType

Note: This is new in IFA011 v2.5.1

Enum (create an enum called VnicType with the literals specified in valueRange ...in CAPS)

0..1

Describes the type of the

vNIC this CP attaches to.

virtual network interface realizing the CPs instantiated from this CPD. This is used to determine which mechanism driver(s) to be used to bind the port.

Experimental

OpenModelAttribute

isInvariant: false
support: MANDATORY
valueRange:

normal

NORMAL,

macvtap

MACVTAP,

direct

DIRECT,

baremetal, direct-physical and virtio-forwarder

BAREMETAL, DIRECT_PHYSICAL and VIRTIO_FORWARDER

Note: This is an Enum and would not have a valueRange specified

attribute

virtualNetworkInterfaceRequirements

VirtualNetworkInterfaceRequirements

0..

N

*	Specifies requirements on a virtual network interface

realising

realizing the CPs instantiated from this CPD.	OpenModelAttribute isInvariant: false support: MANDATORY	association
IFA 011 and model both contain intVirtualLinkDesc	VnfVirtualLinkDesc (model) Identifier (IFA 011)	0..1	Reference of the internal VLD which this internal CPD connects to.	*OpenModelAttribute* isInvariant: false support: MANDATORY *PassedByReference*	association
IFA 011 and model both contain order Note: Did not add this due to presence of vnicOrder	Integer	0..1	The order of the NIC to be assigned on the compute instance (e.g. 2 for eth2). Note: when binding more than one port to a single compute (aka multi vNICs) and ordering is desired, it is mandatory that all ports will be set with an order value. The order values shall represent a positive, arithmetic progression that starts with 0 (i.e. 0, 1, 2,..., n). If the property is not present, it shall be left to the VIM to assign a value when creating the instance.	*OpenModelAttribute* isInvariant: false support: MANDATORY	attribute
Note that model contains cpProtocol at this sub-class level rather than in cpd
(inherited attributes)			All attributes inherited from Cpd.

Class: VnfExtCpd

A VnfExtCpd is a type of Cpd and describes an external interface, a.k.a external CP, exposed by this VNF enabling connection with a VL.

...

support: MANDATORY

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

intCpd

Identifier (Reference to VduCpd)

Model has type VduCpd which makes more sense as this is a member end of an association

0..1

Reference to the internal VDU CPD which is used to instantiate internal CPs. These internal CPs are, in turn, exposed as external CPs defined by this external CPD.

OpenModelAttribute

isInvariant: false
support: CONDITIONAL-MANDATORY
condition: Either intVirtualLinkDesc or intCpd shall be present.

PassedByReference

association

Both IFA 011 and model have

intVirtualLinkDesc

Identifier (IFA 011)

Model has type VnfVirtualLinkDesc

0..1

Reference to the internal Virtual Link Descriptor (VLD) to which CPs instantiated from this external CP Descriptor (CPD) connect.

OpenModelAttribute

isInvariant: false
support: CONDITIONAL-MANDATORY
condition: Either intVirtualLinkDesc or intCpd shall be present.

PassedByReference

association

virtualNetworkInterfaceRequirements

VirtualNetworkInterfaceRequirements

0..

N

*

Specifies requirements on a virtual network interface realising the CPs instantiated from this CPD.

NOTE: In case of referencing an intCpd via its identifier, the virtualNetworkInterfaceRequirements attribute of the referenced intCpd applies.

OpenModelAttribute

isInvariant: false
support: MANDATORY

association

Note: info model defines cpProtocol at this sub-class level and not in cpd.

(inherited attributes)

All attributes inherited from Cpd.

Class: VduProfile

The VduProfile describes additional instantiation data for a given VDU used in a DF.

...

support: MANDATORY

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
vduId	Identifier (Reference to Vdu)	1	Uniquely identifies a VDU.	OpenModelAttribute isInvariant: true support: MANDATORY *PassedByReference*	Attribute
minNumberOfInstances	Integer	1	Minimum number of instances of the VNFC based on this VDU that is permitted to exist for this flavour. Shall be zero or greater.	OpenModelAttribute isInvariant: false support: MANDATORY Experimental	Attribute
maxNumberOfInstances	Integer	1	Maximum number of instances of the VNFC based on this VDU that is permitted to exist for this flavour. Shall be greater than zero.	OpenModelAttribute isInvariant: false support: MANDATORY Experimental	Attribute
localAffinityOrAntiAffinityRule	LocalAffinityOrAntiAffinityRule	0..

N

*	Specifies affinity or anti-affinity rules applicable between the

virtualisation

virtualization containers (e.g. virtual machines) to be created based on this VDU.

When the cardinality is greater than 1, both affinity rule(s) and anti-affinity rule(s) with different scopes (e.g. "Affinity with the scope resource zone and anti-affinity with the scope NFVI node") are applicable to the

virtualisation

virtualization containers (e.g. virtual machines) to be created based on this VDU.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

affinityOrAntiAffinityGroupId

Identifier

0..

N

*	Identifier(s) of the affinity or anti-affinity group(s) the VDU belongs to. NOTE: Each identifier references an affinity or anti-affinity group which expresses affinity or anti-affinity relationships between the

virtualisation

virtualization container(s) (e.g. virtual machine(s)) to be created using this VDU and the

virtualisation

virtualization container(s) (e.g. virtual machine(s)) to be created using other VDU(s) in the same group.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

watchdog

String

0..1

Watchdog action to be triggered by the VIM for the VNF in case the heart beat fails, e.g. reset or hard shutdown, etc.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

vmBootUpTimeOut

Integer

0..1

Timeout value for the VNFM to wait before the successful booting up of the VDU.

OpenModelAttribute

isInvariant: false
support: OPTIONAL

Attribute

Class: VirtualNetworkInterfaceRequirements

This class specifies requirements on a virtual network interface.

...

support: MANDATORY

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
name	String	0..1	Provides a human readable name for the requirement.	OpenModelAttribute isInvariant: false support: MANDATORY	Attribute
description	String	0..1	Provides a human readable description of the requirement.	OpenModelAttribute isInvariant: false support: MANDATORY	Attribute
supportMandatory	Boolean	1	Indicates whether fulfilling the constraint is mandatory (TRUE) for successful operation or desirable (FALSE).	OpenModelAttribute isInvariant: false support: MANDATORY	Attribute
networkInterfaceRequirements	KeyValuePair

0..* (For IFA011 0..N)

The network interface requirements. An element from an array of key-value pairs that articulate the network interface deployment requirements.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

nicIoRequirements

Identifier (reference to logicalNodeData)

Model has LogicalNodeData

LogicalNodeRequirements

0..1

This references (couples) the CPD with any logical node I/O requirements (for network devices) that may have been created. Linking these attributes is necessary

so that

so that I/O requirements that need to be articulated at the logical node level can be associated with the network interface requirements associated with the CPD.

Experimental

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

Attribute

Class: VnfVirtualLinkDesc

Represents the type of network connectivity mandated by the VNF vendor between two or more Connection Points which includes at least one Internal Connection Point.

Parent class: VirtualLinkDesc *** NOTE: Model has this class, but not IFA011. ONAP has not defined this class ***

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

virtualLinkDescId

Identifier

1

Unique identifier of this internal VLD in VNFD.B

Model definition:

Uniquely identifies a VLD in the parent descriptor.

(this is because you can have VnfVirtualLinkDesc and NsVirtualLinkDesc)

Note: Inherited from Class VirtualLinkDesc

OpenModelAttribute

isInvariant: true
support: MANDATORY

Attribute

virtualLinkDescFlavour

VirtualLinkDescFlavour

1..

N

*

Describes a specific flavour of the VL with specific bitrate requirements.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Association

connectivityType

ConnectivityType

Where do we define the datatypes in the model?

1

Model defines this as: Specifies the protocol exposed by a VL and the flow pattern supported by the VL.

Note: Inherited from Class VirtualLinkDesc

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

testAccess

String

0..

N

*

Specifies test access facilities expected on the VL (e.g. none, passive monitoring, or active (intrusive) loopbacks at endpoints).

Note: Inherited from Class VirtualLinkDesc

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

description

String

0..1

Provides human-readable information on the purpose of the VL (e.g. control plane traffic).

Note: Inherited from Class VirtualLinkDesc

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

monitoringParameter

MonitoringParameter

0..

N

*	Defines the

virtualised

virtualized resources monitoring parameters on VLD level.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

Class: VnfDf

A specific deployment version of a VNF with specific requirements for capacity and performance

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

flavorId

Identifier

1

Identifier of this DF within the VNFD.

OpenModelAttribute

isInvariant: true
support: MANDATORY

Attribute

description

String

1

Human readable description of the DF.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

vduProfile

VduProfile

1..

N

*

Describes additional instantiation data for the VDUs used in this flavor.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Association

virtualLinkProfile

VirtualLinkProfile

0..

N

*

Defines the internal VLD along with additional data which is used in this DF.

NOTE 1: This allows for different VNF internal topologies between DFs.

NOTE 2: virtualLinkProfile needs to be provided for all VLs that the CPs of the VDUs in the VDU profiles connect to.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Association

instantiationLevel

InstantiationLevel

1..

N

*

Describes the various levels of resources that can be used to instantiate the VNF using this flavour.

Examples: Small, Medium, Large.

If there is only one "instantiationLevel" entry, it shall be treated as the default instantiation level for this DF.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Association

affinityOrAntiAffinityGroup

AffinityOrAntiAffinityGroup

0..

N

*

Specifies affinity or anti-affinity relationship applicable between the virtualisation containers (e.g. virtual machines) to be created using different VDUs or internal VLs to be created using different VnfVirtualLinkDesc(s) in the same affinity or anti-affinity group.

NOTE: In the present specification, including either VDU(s) or VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is supported. Extension to support including both VDU(s) and VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is left for future specification.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Association

scalingAspect

ScalingAspect

Note: This is not defined by ONAP. It is a Class

0..

N

*

The scaling aspects supported by this DF of the VNF. scalingAspect shall be present if the VNF supports scaling.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Association

placementGroup

PlacementGroup

0..

N

*

Determine where VNFC's (VDU's) are placed with respect to the VNF

OpenModelAttribute

isInvariant: false
support: MANDATORY

Experimental (note that experimental is a lifecycle state and not a value for "support")

Association

baseConfigGroup

BaseConfigGroup

0..1

BaseConfigGroup may set Access Control Lists (ACL's) and establish security groups and server groups.
BaseConfigGroup creates/establishs storage for the VM's (OpenStack Cinder).
BaseConfigGroup may establish internal networks such as OAM (VNF Mgmt) or MNS (Maintenance & Surveillance) established.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Experimental

Association

deploymentGroup

DeploymentGroup

1..

N

*

DeploymentGroup provides the minimum viable VDU and associated VNFC configuration for a useable VNF.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Experimental

Association

IFA011 also defines:

defaultInstantiationLevelId

supportedOperation

vnfLcmOperationsConfiguration

vnfIndicator

initialDelta

supportedOperation

vnfLcmOperationsConfiguration

vnfIndicator

initialDelta

monitoringParameter

Should these be added?

Note: For now have only included defaultInstantiationLevelId , monitoringParameter and vnfIndicator (missing association)

Class: VirtualLinkProfile

The VirtualLinkProfile class specifies a profile for instantiating VLs of a particular NS DF according to a specific VLD and VL DF.

...

- support: MANDATORY

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

AttributeType

virtualLinkProfileId

Note: This is missing in IFA011 but is in the model. This is a necessary attribute in order to instantiate the class

Identifier

1

Uniquely identifies this VirtualLinkProfile class.

OpenModelAttribute

isInvariant: true
support: MANDATORY

Attribute

vnfVirtualLinkDescId

Identifier (Reference to VnfVirtualLinkDesc)

Model has type VnfVirtualLinkDesc because this is a member end of an association

1

Uniquely identifies a Vnf VLD.

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

Association

flavourId

Identifier (Reference to VirtualLinkDescFlavour)

Model has VirtualLinkDf

1

Identifies a flavour within the VnfVirtualLinkDesc.

Model says it's a flavor within the VLD

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

Association

localAffinityOrAntiAffinityRule

LocalAffinityOrAntiAffinityRule

0..

N

*

Specifies affinity or anti-affinity rules applicable between the VLs based on this VnfVirtualLinkDesc.

When the cardinality is greater than 1, both affinity rule(s) and anti-affinity rule(s) with different scopes are applicable to the VLs based on this VnfVirtualLinkDesc.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

affinityOrAntiAffinityGroupId

Identifier

Model has AffinityOrAntiAffinityGroup as this is an association end.

0..

N

*

Identifier(s) of the affinity or anti-affinity group(s) the VnfVirtualLinkDesc belongs to.

NOTE: Each identifier references an affinity or anti-affinity group which expresses affinity or anti-affinity relationship between the VL(s) using this VnfVirtualLinkDesc and the VL(s) using other VnfVirtualLinkDesc(s) in the same group.

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

Association

maxBitRateRequirements

LinkBitrateRequirements

1

Specifies the maximum bitrate requirements for a VL instantiated according to this profile.

NOTE: These attributes are used to control scaling boundaries.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

minBitRateRequirements

LinkBitrateRequirements

1

Specifies the minimum bitrate requirements for a VL instantiated according to this profile.

OpenModelAttribute

isInvariant: false

support: MANDATORY

AttributeinitiationParameters

support: MANDATORY

Attribute

New in IFA011 v2.5.1

virtualLinkProtocolData

VirtualLinkProtocolData (see definition of this datatype in IFA011 v2.5.1)

0..*

Specifies the protocol data for a VL instantiated according to this profile. Cardinality 0 is used when no protocol data needs to be specified.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

initiationParameters

Note: This will be deleted as it is now part of the L3ProtocolData which is referenced as part of the VirtualLinkProtcolData

KeyValuePair

0..

N

*

Specifies initiation parameters for the virtual link.

OpenModelAttribute

isInvariant: false
support: MANDATORY

valueRange: specified values include: cidr, allocationPools (represented by [starting ip address, ending ip address]), gatewayIp, networkName, segmentationId, physicalNetwork.

Note: Incorrect usage of valueRange, remove this and put in the description

Attribute

networkType

Enum

Note:

What which enum? Give it a name.

This will be deleted as it is now part of the L2ProtocolData which is referenced as part of the VirtualLinkProtcolData

Enum

0..1

Type of the network.

OpenModelAttribute

isInvariant: false
support: MANDATORY

valueRange: "VLAN", "VXLAN"

Note: incorrect usage of valueRange. It is not intended to define enums

Attribute

dhcpEnabled

Note: This will be deleted as it is now part of the L3ProtocolData which is referenced as part of the VirtualLinkProtcolData

Boolean

0..1

Indicating whether DHCP is enabled. Default is "FALSE" if not specified otherwise.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

vlanTransparent

Note: This will be deleted as it is now part of the L2ProtocolData which is referenced as part of the VirtualLinkProtcolData

Boolean

0..1

Indicating whether "VLAN Transparent Mode" is supported. Default is "FALSE" if not specified otherwise.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

Class: VirtualLinkDescFlavour

Description:

The VirtualLinkDescFlavour describes additional instantiation data for a given internal VL used in a DF.

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

flavourId

Identifier

1

Identifies a flavour within a VnfVirtualLinkDesc.

OpenModelAttribute

isInvariant: true
support: MANDATORY

Attribute

qos

QoS

Model has VnfQoShas VnfQoS

We should consider putting QoS in Common

and VnfQoS in Vnf and NsQos in Ns sub-models

0..1

QoS of the VL.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

Datatype: LinkBitrateRequirements - Missing in output of model

The LinkBitrateRequirements datatype describes the requirements in terms of bitrate for a Virtual Link.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

root

Number

1

Throughput requirement of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN).

OpenModelAttribute

isInvariant: false
support: MANDATORY

leaf

Number

0..1

Throughput requirement of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E?LAN branches).

NOTE: The present document does not specify the means to declare different bitrate requirements for leaf connections (e.g. E-LAN leaves).

OpenModelAttribute

isInvariant: false
support: MANDATORY

Class: InstantiationLevel

The InstantiationLevel class describes a given level of resources to be instantiated within a DF in term of the number of VNFC instances to be created from each VDU.

...

- support: MANDATORY

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

levelId

Identifier

1

Uniquely identifies a level with the DF.

OpenModelAttribute

isInvariant: true
support: MANDATORY

Attribute

description

String

1

Human readable description of the level.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

vduLevel

VduLevel

1..

N

*

Indicates the number of instance of this VDU to deploy for this level.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Association

virtualLinkBitRateLevel

VirtualLinkBitRateLevel

Note: Not defined by ONAP. It is a datatype

0..

N

*

Specifies bitrate requirements applicable to virtual links created from particular virtual link descriptors for this level.

NOTE: If not present, it is assumed that the bitrate requirements can be derived from those specified in the VduCpd instances applicable to the internal VL. If present in both the InstantiationLevel and the VduCpd instances applicable to the internal VL, the highest value takes precedence.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Association

Attribute
scaleInfo	ScaleInfo	0..

N

*

Represents for each aspect the scale level that corresponds to this instantiation level. scaleInfo shall be present if the VNF supports scaling.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

Datatype: ScaleInfo

This datatype provides information about the scale level of a VNF instance w.r.t. one scaling aspect.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

aspectId

Identifier (Reference to ScalingAspect)

Model has ScalingAspect

as this is an end of an association

1

Reference to the scaling aspect.

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

Association

scaleLevel

Integer

1

The scale level, greater than or equal to 0.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Attribute

Class: VduLevel

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

vduId

Identifier (Reference to Vdu)

Model has type Vdu as this is an association end

1

Uniquely identifies a VDU.

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

Association

numberOf Instances

Integer

1

Number of instances of VNFC based on this VDU to deploy for an instantiation level or for a scaling delta.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Experimental

Association

Datatype: QoS

(Note: In model this is an abstract parent of NsQoS and VnfQoS. VnfQoS. I recommend we create QoS in "common" with attributes as specified in the model, and then create VnfQoS and NsQos.)

It is the asbstract parent of the NsQos and VnfQos datatypes, as the NsQoS (QoS in ETSI GS NFV IFA 014) includes a priority attribute, while VnfQoS (QoS in ETSI GS NFV IFA 011) does not.

The QoS datatype specifies quality of service parameters applicable to a VL.

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

latency

Number

1

Maximum latency in ms.

OpenModelAttribute

isInvariant: false
support: MANDATORY

packetDelayVariation

Number

1

Maximum jitter in ms.

OpenModelAttribute

isInvariant: false
support: MANDATORY

packetLossRatio

Number

0..1

Maximum packet loss ratio. Cardinality is 0 if no packetLossRatio requirement exists.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: LocalAffinityOrAntiAffinityRule - Missing from clean output

The LocalAffinityOrAntiAffinityRule describes the affinity or anti-affinity rule applicable between the virtualization containers to be created based on a particular VDU, or between internal VLs to be created based on a particular VnfVirtualLinkDesc.

Applied Stereotypes:

PreliminaryNote: The model defines this in a completely different way.

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

type

EnumRuleType

Which one?

1

SpecifiesSpecifies whether the rule is an affinity rule or an anti-affinity rule.

support: MANDATORY

valueRange: "Affinity", "Anti-Affinity"

Remove from valueRange and put into enum as caps

scope

EnumRuleScope

Which one?

1

Specifies the scope of the rule.

support: MANDATORY

valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node"

Remove from valueRange and put into enum as caps

Class: AffinityOrAntiAffinityGroup - missing in clean output

Note: This should probably go into common as it is applicable to NS and VNFs with the following definition:

The AffinityOrAntiAffinityGroup class describes the affinity or anti-affinity relationshipor anti-affinity relationship.

For NSs, those rules are applicable between the VNF instances created using different VnfProfiles, the Virtual Link instances created using different VlProfiles or the nested NS instances created using different NsProfiles.

For VNFs, those rules are applicable between the virtualization containers to be created based on different VDUs, or between internal VLs to be created based on different VnfVirtualLinkDesc(s).

Per VNF, the affinity / anti-affinity rules defined using this class, using the LocalAffinityOrAntiAffinityRule datatypet, and using the placement constraints in the GrantLifecycleOperation as defined in ETSI GS NFV IFA 007 should be conflict-free. In case of conflicts, the placement constraints in the GrantLifecycleOperation shall take precedence

Applied Stereotypes:

OpenModelClass

- support: MANDATORY

Preliminary

Note: The model defines the attributes of this class differently.

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

groupId

Identifier

1

Identifies an affinity or anti-affinity group to which the affinity or anti-affinity rule applies.

OpenModelAttribute

isInvariant: true
support: MANDATORY

Attribute

type

Enum

Which one?

Model has affinityOrAntiAffinity

Enum

AffinityType with literals: "AFFINITY" "ANTI_AFFINITY)

1

Specifies whether the rule is an affinity rule or an anti-affinity rule.

OpenModelAttribute

isInvariant: false
support: MANDATORY

valueRange: "Affinity", "Anti-Affinity"

Note: Incorrect usage of value range.

Attributescope

Enum

Which one?

Remove it

Attribute

scope

AffinityOrAntiAffinityScope enum with literals: "NFVI_POP"

"ZONE"

"ZONE_GROUP"

"NFVI_NODE"

1

Specifies the scope of the rule.

OpenModelAttribute

isInvariant: false
support: MANDATORY

valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node

Note: Incorrect usage of value range. Put in enum as CAPS.

Datatype: AddressData - Missing in Clean Output

The AddressData datatype supports providing information about the addressing scheme and parameters applicable to a CP.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

addressType

Identifier

Both IFA011 and model have this as an enum called "AddressType" with literals:

"MAC"

"IP"

(note: model incorrectly calls this AdressType)

1

Describes the type of the address to be assigned to the CP instantiated from the parent CPD.

Value:

MAC address.
IP address.

etc.

The content type shall be aligned with the address type supported by the layerProtocol attribute of the parent CPD.

OpenModelAttribute

isInvariant: false
support: MANDATORY

l2AddressData

L2AddressData

0..1

Provides the information on the MAC addresses to be assigned to the CP(s) instantiated from the parent CPD.

Shall be present when the addressType is MAC address.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Experimental

l3AddressData

L3AddressData

0..1

Provides the information on the IP addresses to be assigned to the CP instantiated from the parent CPD.

Shall be present when the addressType is IP address.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: L2AddressData - Missing in clean output

The L2AddressData datatype provides information about Layer 2 level addressing applicable to a CP.

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

macAddressAssignment

Boolean

1

Specify if the MAC address assignment is the responsibility of management and orchestration function or not.

If it is set to True, it is the management and orchestration function responsibility.

If it is set to False, it will be provided by an external entity, e.g. OSS/BSS.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: L3AddressData - Missing in clean output

The L3AddressData datatype supports providing information about Layer 3 level addressing scheme and parameters applicable to a CP.

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes
iPAddressAssignment	Boolean	1	Specify if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility.	OpenModelAttribute isInvariant: false support: MANDATORY
floatingIpActivated	Boolean	1	Specify if the floating IP scheme is activated on the CP or not.	OpenModelAttribute isInvariant: false support: MANDATORY
iPAddressType	Enum Which one?IpAddressType	0..1	Define address type. Values: IPv4 address. IPv6 address NOTE: The address type should be aligned with the address type supported by the layerProtocol attribute of the parent Cpd.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: "IPv4", "IPv6" Note: Incorrect usage of value range
numberOfIpAddress	Integer	0..1	Minimum number of IP addresses to be assigned based on this L3AddressData information element.	OpenModelAttribute isInvariant: false support: MANDATORY

Datatype: CpProtocolData

assigned based on this L3AddressData information element.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: CpProtocolData - Missing from clean output

A CpProtocolData information element describes and associates the protocol layer that a CP uses together with other protocol and connection point information.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

associatedLayerProtocol

Enum

Model has this as LayerProtocol enum

1

One of the values of the attribute layerProtocol of the Cpd IE.

OpenModelAttribute

isInvariant: false
support: MANDATORY

addressData

AddressData

0..

N

*

Model has 1

Provides information on the addresses to be assigned to the

CP(s) instantiated from the CPD.

support: MANDATORY

...

CP(s) instantiated from the CPD.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: ConnectivityType - Missing from clean output

The ConnectivityType datatype specifies the protocol exposed by a VL and the flow pattern supported by the VL. The top layer protocol of the VL protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

layerProtocol

Enum

Model has enum LayerProtocol, however it doesn't define the literals:

"ETHERNET", "MPLS", "ODU2", "IPV4", "IPV6" and "PSEUDOWIRE"

Note: Just because we may not support all these layer protocols does not mean they shouldn't be defined.

1..*

Identifies the

protocol

protocols this VL gives access to (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire).

OpenModelAttribute

isInvariant: false
support: MANDATORY

flowPattern

String

0..1

Identifies the flow pattern of the connectivity (Line, Tree, Mesh).

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: VirtualCpuPinningData - Obsolete

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

virtualCpuPinningPolicy

Enum

Enum

Model has enum CpuPinningPolicy with values: STATIC, DYNAMIC

0..1

The policy can take values of "static" or "dynamic". In case of "static" the virtual CPU cores are requested to be allocated to logical CPU cores according to the rules defined in virtualCpuPinningRules. In case of "dynamic" the allocation of virtual CPU cores to logical CPU cores is decided by the VIM. (e.g.: SMT (Simultaneous Multi-Threading) requirements).

OpenModelAttribute

isInvariant: false
support: MANDATORY

valueRange: "static", "dynamic"

Incorrect use of valueRange

virtualCpuPinningRule

Not specified

Editor's note: need to be specified

0..1

A list of rules that should be considered during the allocation of the virtual CPUs to logical CPUs in case of "static" virtualCpuPinningPolicy.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: RequestedAdditionalCapabilityData

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes
requestedAdditionalCapabilityName	String	1	Identifies a requested additional capability for the VDU.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: For acceleration capabilities, reference to ETSI GS NFV-IFA 002. Incorrect use of valueRange. Put in description
supportMandatory	Boolean	1	Indicates whether the requested additional capability is mandatory for successful operation.	OpenModelAttribute isInvariant: false support: MANDATORY
minRequestedAdditionalCapabilityVersion	String	0..1	Identifies the minimum version of the requested additional capability.	OpenModelAttribute isInvariant: false support: MANDATORY
preferredRequestedAdditionalCapabilityVersion	String	0..1	Identifies the preferred version of the requested additional capability.	OpenModelAttribute isInvariant: false support: MANDATORY
targetPerformanceParameters	KeyValuePair	1..N	Identifies specific attributes, dependent on the requested additional capability type.	support: MANDATORY

...

1..*

Identifies specific attributes, dependent on the requested additional capability type.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: VnfConfigurableProperties

Description:

This datatype defines the configurable properties of a VNF (e.g. related to auto scaling and auto healing). For a VNF instance, the value of these properties can be modified by the VNFM.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

isAutoscaleEnabled

Boolean

0..1

It permits to enable (TRUE)/disable (FALSE) the auto-scaling functionality.

NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported.

OpenModelAttribute

isInvariant: false
support: MANDATORY

isAutohealEnabled

Boolean

0..1

It permits to enable (TRUE)/disable (FALSE) the auto-healing functionality.

NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported.

OpenModelAttribute

isInvariant: false
support: MANDATORY

additionalConfigurablePropertyString

Not specified

We need to specify and propose to ETSI. Propose to specify as string

0..N*

It provides VNF specific configurable properties that can be modified using the ModifyVnfInfo operation.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: VnfcConfigurableProperties

This datatype defines the configurable properties of a VNFC. For a VNFC instance, the value of these properties can be modified through the VNFM.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

additionalVnfcConfigurableProperty

String

0..N

It provides VNFC configurable properties that can be modified using the ModifyVnfInfo operation.

NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported.supported.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Datatype: VnfLifecycleManagementScript

Note: In the model there are two data types called VnfLifecycleManagementScript and NsLifecycleManagementScript.

Defines the information elements related to the lifecycle management script for the VNF.

Applied Stereotypes:

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes
event	Enum In the model this is LcmEventType	0..N*	Describes VNF lifecycle event(s) or an external stimulus detected on a VNFM reference point. NOTE: At least one of these two attributes shall be included.	OpenModelAttribute isInvariant: false support: CONDITIONAL_MANDATORY condition: At least one of the 2 attributes event or lcmTransitionEvent shall be included valueRange: for lifecycle events, include: "EVENT_START_INSTANTIATION", "EVENT_END_INSTANTIATION", "EVENT_START_SCALING", "EVENT_END_SCALING", "EVENT_START_SCALING_TO_LEVEL", "EVENT_END_SCALING_TO_LEVEL", "EVENT_START_HEALING", "EVENT_END_HEALING", "EVENT_START_TERMINATION", "EVENT_END_TERMINATION", "EVENT_START_VNF_FLAVOR_CHANGE", "EVENT_END_VNF_FLAVOR_CHANGE", "EVENT_START_VNF_OPERATION_CHANGE", "EVENT_END_VNF_OPERATION_CHANGE", "EVENT_START_VNF_EXT_CONN_CHANGE", "EVENT_END_VNF_EXT_CONN_CHANGE", "EVENT_START_VNFINFO_MODIFICATION", "EVENT_END_VNFINFO_MODIFICATION"; for external stimulus, include: receipt of request message of instantiation, scaling, healing, termination, change of VNF flavour, change of the operation state of the VNF, change of external VNF connectivity, modification of VNF information or the receipt of a notification regarding the change of a VNF indicator value. Incorrect usage of valueRange. Remove this.
lcmTransitionEvent	String	0..N*	Describes the transition VNF lifecycle event(s) that cannot be mapped to any of the enumerated values defined for the event attribute.NOTE. NOTE: At least one of these two attributes shall be included.	OpenModelAttribute isInvariant: false support: CONDITIONAL_MANDATORY condition: At least one of these two attributes the 2 attributes event or lcmTransitionEvent shall be included . support: MANDATORY
scriptString	Not specified. We should define this and propose to ETSI. Propose to define as string	1	Information to locate a VNF LCM script (e.g. written in a DSL as specified in requirement VNF_PACK.LCM.001) triggered to react to one of the events listed in the event attribute.	OpenModelAttribute isInvariant: false support: MANDATORY
scriptDsl	String	1	Defines the domain specific language (i.e. the type) of script that is provided. Types of scripts could include bash, python, etc.	OpenModelAttribute isInvariant: false support: MANDATORY
scriptInput	KeyValuePair	0..N*	Array of KVP requirements with the key as the parameter name and the value as the parameter that need to be passed as an input to the script. NOTE: The scriptInput values are passed to the scripts in addition to the parameters received in the operation invocation request or indicator value change.	OpenModelAttribute isInvariant: false support: MANDATORY

Class: VnfIndicator

Editor's note: may related to DCAE/VES projectsThe VnfIndicator class defines the indicator the VNF supports.

Applied Stereotypes:

OpenModelClass

- support: MANDATORY

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
id	Identifier	1	Unique identifier.	OpenModelAttribute isInvariant: true support: MANDATORY	Attribute
name	String	0..1	The human readable name of the VnfIndicator.	OpenModelAttribute isInvariant: false support: MANDATORY	Attribute
indicatorValue	String	1..N	Defines the allowed values or value ranges of this indicator.indicator.	OpenModelAttribute isInvariant: false support: MANDATORY	Attribute
source	Enum Model has VnfIndicatorSource with values: VNF, EM, BOTH	1	Describe the source of the indicator. This tells the consumer where to send the subscription request.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: "VNF", "EM", "Both" Incorrect usage of valueRange	Attribute

Datatype: MonitoringParameter

Editor's note: may related to DCAE/VES projectsSpecifies the virtualized resource related performance metric to be tracked by the VNFM, e.g. for auto-scaling purposes. The VNFM collects the values of performance metrics identified by this information element from the VIM(s) using one or more locally initiated PM Jobs. These values can be used as inputs to auto-scaling rules

Applied Stereotypes:

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

id

Identifier

1

Unique identifier of the monitoring parameter.

OpenModelAttribute

isInvariant: true
support: MANDATORY

name

String

0..1

Human readable name of the monitoring parameter.

OpenModelAttribute

isInvariant: false
support: MANDATORY

performanceMetric

String

1

Identifies the

virtualised

virtualized resource performance metric.

OpenModelAttribute

isInvariant: false
support: MANDATORY

collectionPeriod

Not specified

Editor's note: need to be specified and proposed to ETSI, Currently defined as enum CollectionPeriod but with no enumeration literals defined.

0..1

An attribute that describes the recommended periodicity at which to collect the performance information.

VNFM determines if this parameter is considered.

The vendor may provide this information as a guidance for creating PmJobs if needed.

NOTE: The MANO or NFVI may not support the recommended collectionPeriod based on their functionalities, and can reject the requests based on the recommended collectionPeriod in this case

.support: MANDATORY

...

.	OpenModelAttribute isInvariant: false support: MANDATORY

Class: VnfdElementGroup NOTE: This is "obsolete" in V2.5.1

A VNFD Element Group is a mechanism for associating elements of a VNFD (Vdus and VnfVirtualLinkDesc(s)) for a certain purpose, for example, scaling aspects.

A given element can belong to multiple groups.

Applied Stereotypes:

OpenModelClass

support: MANDATORY

Preliminary

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
vnfdElementGroupId	Identifier	1	Unique identifier of this group in the VNFD.	OpenModelAttribute isInvariant: true support: MANDATORY	Attribute
description	String	1	Human readable description of the group.	OpenModelAttribute isInvariant: false support: MANDATORY	Attribute
vdu	Identifier (Reference to Vdu) Model has type Vdu as this is an association end	0..N	References to Vdus that are part of this group.	OpenModelAttribute isInvariant: false support: MANDATORY	Association
virtualLinkDesc	Identifier (Reference to VnfVirtualLinkDesc) Model has type VnfVirtualLinkDesc as this is an association end	0..N	References to VnfVirtualLinkDesc that are part of this group.	OpenModelAttribute isInvariant: false support: MANDATORY	Association

Class: PlacementGroup (Experimental) As this inherits from VnfdElementGroup and that is obsolete, is this obsolete?

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
elementGroupId	Identifier	1	Unique identifier of this group in the VNFD.	OpenModelAttribute isInvariant: true support: MANDATORY	Attribute
placementStrategy	Enum Define an actual enum type with values: COLOCATION, ISOLATION, and EXCLUSIVELY	1	Determine where VNFC's (VDU's) are placed with respect to the VNF.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: "co-location", "isolation", "exclusively" NOTE: Co-location - members of the group share the same physical host or rack. isolation - members of the group do not share the same physical host or rack. Exclusivity - members have sole use of a given physical host or rack (not shared with any vnfcs outside the group). Incorrect use of valueRange	Attribute
vnfcMembers	Not specified (should it be Identifier (Reference to Vdu)?) Good question. If it is the end of an association is should be type Vdu?	0..N	References to Vdus that are part of this group.	*OpenModelAttribute* isInvariant: false support: MANDATORY	Association?
strategyScope	Enum Define an actual enum with values: HOST, and RACK	1	indicate if the strategy is applied at the host or rack level	*OpenModelAttribute* isInvariant: false support: MANDATORY valueRange: "host", "rack" Incorrect usage of valueRange	Attribute

Class: BaseConfigGroup (Experimental)

Class: DeploymentGroup (Experimental)

Datatype: VnfInfoModifiableAttributes

This datatype defines the VNF-specific extension and metadata attributes of the VnfInfo that are writeable via the ModifyVnfInfo operation.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

extension

Not specified

Editor's note: need to be specified and proposed to ETSI

0..N*

"Extension" attributes of VnfInfo that are writeable.

OpenModelAttribute

isInvariant: false
support: MANDATORY

metadata

Not specified

Editor's note: need to be specified and proposed to ETSI

0..N*

"Metadata" attributes of VnfInfo that are writeable.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Page Comparison

Versions Compared

Old Version 5

New Version Current

Key

Class: Vnfd

Class: Vdu

Class: SwImageDesc

Class: SwImageDesc

Class: VirtualComputeDesc

Datatype:

VirtualCpuData

Datatype:

VirtualMemoryData

Datatype: VirtualMemoryData

Class: VirtualStorageDesc

Class: VirtualStorageDesc

Class: LogicalNodeData NOTE: In IFA011 v2.5.1 this is changed to class LogicalNodeRequirements

Class: Cpd

Class: VduCpd

Class: VnfExtCpd

Class: VduProfile

Class: VirtualNetworkInterfaceRequirements

Class: VnfVirtualLinkDesc

Class: VnfDf

Class: VirtualLinkProfile

Class: VirtualLinkDescFlavour

Datatype: LinkBitrateRequirements - Missing in output of model

Class: InstantiationLevel

Datatype: ScaleInfo

Class: VduLevel

Datatype: QoS

Datatype: LocalAffinityOrAntiAffinityRule - Missing from clean output

Class: AffinityOrAntiAffinityGroup - missing in clean output

Datatype: AddressData - Missing in Clean Output

Datatype: L2AddressData - Missing in clean output

Datatype: L3AddressData - Missing in clean output

Datatype: CpProtocolData

Datatype: CpProtocolData - Missing from clean output

Datatype: ConnectivityType - Missing from clean output

Datatype: VirtualCpuPinningData - Obsolete

Datatype: RequestedAdditionalCapabilityData

Datatype: VnfConfigurableProperties

Datatype: VnfcConfigurableProperties

Datatype: VnfLifecycleManagementScript

Class: VnfIndicator

Datatype: MonitoringParameter

Class: VnfdElementGroup NOTE: This is "obsolete" in V2.5.1

Class: PlacementGroup (Experimental) As this inherits from VnfdElementGroup and that is obsolete, is this obsolete?

Class: BaseConfigGroup (Experimental)

Class: DeploymentGroup (Experimental)

Datatype: VnfInfoModifiableAttributes