Page Comparison

This wiki describes how to deploy SDN-C on a Kubernetes cluster using latest SDN-C helm chart.

...

Code Block

ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# sudo mkdir /onapDev


#Note that all components are changed to enabled:false except sdnc (and underlying mysql). Here we set number of SDNC/MySQL replica to 3/2.
#Note that global.persistence.mountPath is set to non-mounted directory /onapDev (this is required to be done since we will keep nfs-provisioner as enabled in SDN-C configuration)
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# cat ~/oom/kubernetes/onap/values.yaml
# Copyright © 2017 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#################################################################
# Global configuration overrides.
#
# These overrides will affect all helm charts (ie. applications)
# that are listed below and are 'enabled'.
#################################################################
global:
  # Change to an unused port prefix range to prevent port conflicts
  # with other instances running within the same k8s cluster
  nodePortPrefix: 302

  # ONAP Repository
  # Uncomment the following to enable the use of a single docker
  # repository but ONLY if your repository mirrors all ONAP
  # docker images. This includes all images from dockerhub and
  # any other repository that hosts images for ONAP components.
  #repository: nexus3.onap.org:10001
  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==

  # readiness check - temporary repo until images migrated to nexus3
  readinessRepository: oomk8s
  # logging agent - temporary repo until images migrated to nexus3
  loggingRepository: docker.elastic.co

  # image pull policy
  pullPolicy: Always

  # default mount path root directory referenced
  # by persistent volumes and log files
  persistence:
    mountPath: /onapDev

  # flag to enable debugging - application support required
  debugEnabled: false


#################################################################
# Enable/disable and configure helm charts (ie. applications)
# to customize the ONAP deployment.
#################################################################
aaf:
  enabled: false
aai:
  enabled: false
appc:
  enabled: false
clamp:
  enabled: false
cli:
  enabled: false
consul:
  enabled: false
dcaegen2:
  enabled: false
esr:
  enabled: false
log:
  enabled: false
message-router:
  enabled: false
mock:
  enabled: false
msb:
  enabled: false
multicloud:
  enabled: false
policy:
  enabled: false
portal:
  enabled: false
robot:
  enabled: false
sdc:
  enabled: false
sdnc:
  enabled: true

  dmaap-listenerreplicaCount: 3

  config:
    enableClustering: false

  dmaapPortmysql:
3904 so:   enableddisableNfsProvisioner: true
false    replicaCount: 12
so:
  livenessenabled: false

  # replicaCount: 1

  liveness:
    # necessary to disable liveness probe when setting breakpoints
    # in debugger so K8s doesn't restart unresponsive container
    enabled: true

  # so server configuration
  config:
    # message router configuration
    dmaapTopic: "AUTO"
    # openstack configuration
    openStackUserName: "vnf_user"
    openStackRegion: "RegionOne"
    openStackKeyStoneUrl: "http://1.2.3.4:5000"
    openStackServiceTenantName: "service"
    openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"

  # configure embedded mariadb
  mariadb:
    config:
      mariadbRootPassword: password
uui:
  enabled: false
vfc:
  enabled: false
vid:
  enabled: false
vnfsdk:
  enabled: false
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#

Note: If you set number of sdnc/mysql replicas in onap/values.yaml, it will overrides the setting you are about to do in the next step.

Customize the oom/kubernetes/sdnc chart, like the values.yaml file, to configure number of replicas for SDN-C and MySQL service as per your deployment needs.

...

Code Block

#Press "Enter" after running the command to get the prompt back
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# nohup  sudo helm serve >/dev/null 2>&1 &
[1] 2316
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# Regenerating index. This may take a moment.
Now serving you on 127.0.0.1:8879

ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#


# Verify
$ ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# helm repo list
NAMEps -ef | grep helm

root      7323 URL18581 stable 0 https20://kubernetes-charts.storage.googleapis.com
local52 pts/8    http://127.0.0.1:8879
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#

If you don't find the local repo, add it manually.

Note the IP(localhost) and port number that is listed in above response (8879 here) and use it in "helm repo add" command as follows:

Code Block
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# helm repo add local http://127.0.0.1:8879 "local" has been added to your repositories ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#

Install "make" ( Learn more about ubuntu-make here : https://wiki.ubuntu.com/ubuntu-make) and build a local Helm repository (from the kubernetes directory):

Code Block

#######################
# Install make from kubernetes directory. 
#######################00:00:00 sudo helm serve
root      7324  7323  0 20:52 pts/8    00:00:00 helm serve
ubuntu    7445 18581  0 20:52 pts/8    00:00:00 grep --color=auto helm
$


# Verify
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# sudohelm aptrepo installlist
makeNAME Reading package lists... DoneURL
Buildingstable dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
  linux-headers-4.4.0-62 linux-headers-4.4.0-62-generic linux-image-4.4.0-62-generic snap-confine
Use 'sudo apt autoremove' to remove them.
Suggested packages:
  make-doc
The following NEW packages will be installed:
  make
0 upgraded, 1 newly installed, 0 to remove and 72 not upgraded.
Need to get 151 kB of archives.
After this operation, 365 kB of additional disk space will be used.
Get:1 http://nova.clouds.archive.ubuntu.com/ubuntu xenial/main amd64 make amd64 4.1-6 [151 kB]
Fetched 151 kB in 0s (208 kB/s)
Selecting previously unselected package make.
(Reading database ... 121778 files and directories currently installed.)
Preparing to unpack .../archives/make_4.1-6_amd64.deb ...
Unpacking make (4.1-6) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up make (4.1-6) ...
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# 



#######################
# Build local helm repo
#######################
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# sudo make all

[common]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
make[2]: Entering directory '/home/ubuntu/oom/kubernetes/common'

[common]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
==> Linting common
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/common-2.0.0.tgz
make[3]: Leaving https://kubernetes-charts.storage.googleapis.com
local   http://127.0.0.1:8879
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#

If you don't find the local repo, add it manually.

Note the IP(localhost) and port number that is listed in above response (8879 here) and use it in "helm repo add" command as follows:

Code Block
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# helm repo add local http://127.0.0.1:8879 "local" has been added to your repositories ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#

Install "make" ( Learn more about ubuntu-make here : https://wiki.ubuntu.com/ubuntu-make) and build a local Helm repository (from the kubernetes directory):

Code Block

#######################
# Install make from kubernetes directory. 
#######################
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# sudo apt install make
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
  linux-headers-4.4.0-62 linux-headers-4.4.0-62-generic linux-image-4.4.0-62-generic snap-confine
Use 'sudo apt autoremove' to remove them.
Suggested packages:
  make-doc
The following NEW packages will be installed:
  make
0 upgraded, 1 newly installed, 0 to remove and 72 not upgraded.
Need to get 151 kB of archives.
After this operation, 365 kB of additional disk space will be used.
Get:1 http://nova.clouds.archive.ubuntu.com/ubuntu xenial/main amd64 make amd64 4.1-6 [151 kB]
Fetched 151 kB in 0s (208 kB/s)
Selecting previously unselected package make.
(Reading database ... 121778 files and directories currently installed.)
Preparing to unpack .../archives/make_4.1-6_amd64.deb ...
Unpacking make (4.1-6) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up make (4.1-6) ...
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# 



#######################
# Build local helm repo
#######################
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# sudo make all

[common]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
make[2]: Entering directory '/home/ubuntu/oom/kubernetes/common'

[dgbuildercommon]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang==> tightLinting whilecommon
we grab [INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/common-2.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'

[dgbuilder]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting dgbuilder
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/dgbuilder-2.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'

[postgres]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting postgres
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/postgres-2.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'

[mysql]
make[3]: Entering directory '/home/ubuntu/oom/kubernetes/common'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting mysql
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/mysql-2.0.0.tgz
make[3]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
make[2]: Leaving directory '/home/ubuntu/oom/kubernetes/common'
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[vid]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting vid
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/vid-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[so]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting so
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/so-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[cli]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting cli
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/cli-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[aaf]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting aaf
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/aaf-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[log]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting log
[INFO] Chart.yaml: icon is recommended
[WARNING] templates/: directory not found

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/log-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[esr]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting esr
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/esr-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[mock]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting mock
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/mock-0.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[multicloud]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting multicloud
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/multicloud-1.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[mso]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting mso
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/mso-1.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[dcaegen2]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting dcaegen2
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/dcaegen2-1.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[vnfsdk]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting vnfsdk
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/vnfsdk-1.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[policy]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting policy
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/policy-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[consul]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting consul
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/consul-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[clamp]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting clamp
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/clamp-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[appc]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 3 charts
Downloading common from repo http://127.0.0.1:8879
Downloading mysql from repo http://127.0.0.1:8879
Downloading dgbuilder from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting appc
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/appc-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[sdc]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting sdc
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/sdc-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[portal]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting portal
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/portal-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[aai]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting aai
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/aai-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[robot]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting robot
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/robot-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[msb]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting msb
[INFO] Chart.yaml: icon is recommended
[WARNING] templates/: directory not found

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/msb-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[vfc]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
==> Linting vfc
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/vfc-0.1.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[message-router]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting message-router
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/message-router-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[uui]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 1 charts
Downloading common from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting uui
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/uui-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[sdnc]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 3 charts
Downloading common from repo http://127.0.0.1:8879
Downloading mysql from repo http://127.0.0.1:8879
Downloading dgbuilder from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting sdnc
[INFO] Chart.yaml: icon is recommended

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/sdnc-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'

[onap]
make[1]: Entering directory '/home/ubuntu/oom/kubernetes'
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "local" chart repository
...Successfully got an update from the "stable" chart repository
Update Complete. ?Happy Helming!?
Saving 24 charts
Downloading aaf from repo http://127.0.0.1:8879
Downloading aai from repo http://127.0.0.1:8879
Downloading appc from repo http://127.0.0.1:8879
Downloading clamp from repo http://127.0.0.1:8879
Downloading cli from repo http://127.0.0.1:8879
Downloading common from repo http://127.0.0.1:8879
Downloading consul from repo http://127.0.0.1:8879
Downloading dcaegen2 from repo http://127.0.0.1:8879
Downloading esr from repo http://127.0.0.1:8879
Downloading log from repo http://127.0.0.1:8879
Downloading message-router from repo http://127.0.0.1:8879
Downloading mock from repo http://127.0.0.1:8879
Downloading msb from repo http://127.0.0.1:8879
Downloading multicloud from repo http://127.0.0.1:8879
Downloading policy from repo http://127.0.0.1:8879
Downloading portal from repo http://127.0.0.1:8879
Downloading robot from repo http://127.0.0.1:8879
Downloading sdc from repo http://127.0.0.1:8879
Downloading sdnc from repo http://127.0.0.1:8879
Downloading so from repo http://127.0.0.1:8879
Downloading uui from repo http://127.0.0.1:8879
Downloading vfc from repo http://127.0.0.1:8879
Downloading vid from repo http://127.0.0.1:8879
Downloading vnfsdk from repo http://127.0.0.1:8879
Deleting outdated charts
==> Linting onap
Lint OK

1 chart(s) linted, no failures
Successfully packaged chart and saved it to: /home/ubuntu/oom/kubernetes/dist/packages/onap-2.0.0.tgz
make[1]: Leaving directory '/home/ubuntu/oom/kubernetes'
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#

Note
Setup of this Helm repository is a one time activity. If you make changes to your deployment charts or values, make sure to run make command again to update your local Helm repository.

Create persistent volumes If Change 41597 , has not been merged , create persistent volumes to be available for claim by persistent volumes claim created during MySQL pods deployment. (As of today, late April 2018, the change has been merged and you don't need to create PVs per following step.)

Code Block

#use spec.storageClassName as {Release-name}-sdnc-db-data (In our example, release name is taken as "dev")
#use spec.hostPath.path as {global.perisistentPath}/{Release-name}/sdnc/data (In our example, global.persistentPath is taken as an unmounted directory /onapDev; release name is taken as "dev")
#below yaml file will create two persistent volumes to support two MySQL DB replicas


ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# cd /home/ubuntu
ubuntu@k8s-s1-master:/home/ubuntu# cat > pv.yaml << EOF
kind: PersistentVolume
apiVersion: v1
metadata:
  annotations:
    volume.alpha.kubernetes.io/storage-class: "yes"
  name: nfs-vol1
  namespace: onap
  labels:
    app: nfs-provisioner
    type: local
spec:
  capacity:
    storage: 11Gi
  accessModes:
    - ReadWriteMany
    - ReadWriteOnce
  storageClassName: dev-sdnc-db-data
  hostPath:
    path: "/onapDev/dev/sdnc/data"
---
kind: PersistentVolume
apiVersion: v1
metadata:
  annotations:
    volume.alpha.kubernetes.io/storage-class: "yes"
  name: nfs-vol2
  namespace: onap
  labels:
    app: nfs-provisioner
    type: local
spec:
  capacity:
    storage: 11Gi
  accessModes:
    - ReadWriteMany
    - ReadWriteOnce
  storageClassName: dev-sdnc-db-data
  hostPath:
    path: "/onapDev/dev/sdnc/data"
EOF
ubuntu@k8s-s1-master:/home/ubuntu# kubectl create -f pv.yaml
ubuntu@k8s-s1-master:/home/ubuntu# cd oom/kubernetes
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#

...

Code Block

Example:
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# helm install local/onap --name <Release-name> --namespace onap

Execute:
# we choose "dev" as our release name here
ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes# helm install local/onap --name dev --namespace onap
NAME:   dev
LAST DEPLOYED: Thu Apr  5 15:29:43 2018
NAMESPACE: onap
STATUS: DEPLOYED

RESOURCES:
==> v1beta1/ClusterRoleBinding
NAME          AGE
onap-binding  <invalid>

==> v1/Service
NAME                      TYPE       CLUSTER-IP      EXTERNAL-IP  PORT(S)                                       AGE
dev-aaf-cs                ClusterIP  None            <none>       7000/TCP,7001/TCP,9042/TCP,9160/TCP           <invalid>
dev-aaf                   NodePort   10.102.199.114  <none>       8101:30299/TCP                                <invalid>
dev-sdnc-dgbuilder        NodePort   10.98.198.119   <none>       3000:30203/TCP                                <invalid>
dev-sdnc-dmaap-listener   ClusterIP  None            <none>       <none>                                        <invalid>
sdnc-dbhost-read          ClusterIP  10.97.164.247   <none>       3306/TCP                                      <invalid>
dev-sdnc-nfs-provisioner  ClusterIP  10.96.108.12    <none>       2049/TCP,20048/TCP,111/TCP,111/UDP            <invalid>
dev-sdnc-dbhost           ClusterIP  None            <none>       3306/TCP                                      <invalid>
sdnc-sdnctldb02           ClusterIP  None            <none>       3306/TCP                                      <invalid>
sdnc-sdnctldb01           ClusterIP  None            <none>       3306/TCP                                      <invalid>
dev-sdnc-portal           NodePort   10.98.82.180    <none>       8443:30201/TCP                                <invalid>
dev-sdnc-ueb-listener     ClusterIP  None            <none>       <none>                                        <invalid>
sdnc-cluster              ClusterIP  None            <none>       2550/TCP                                      <invalid>
dev-sdnc                  NodePort   10.109.177.114  <none>       8282:30202/TCP,8202:30208/TCP,8280:30246/TCP  <invalid>

==> v1beta1/Deployment
NAME                      DESIRED  CURRENT  UP-TO-DATE  AVAILABLE  AGE
dev-aaf-cs                1        1        1           0          <invalid>
dev-aaf                   1        1        1           0          <invalid>
dev-sdnc-dgbuilder        1        1        1           0          <invalid>
dev-sdnc-dmaap-listener   1        1        1           0          <invalid>
dev-sdnc-nfs-provisioner  1        1        1           0          <invalid>
dev-sdnc-portal           1        0        0           0          <invalid>
dev-sdnc-ueb-listener     1        0        0           0          <invalid>

==> v1beta1/StatefulSet
NAME         DESIRED  CURRENT  AGE
dev-sdnc-db  2        1        <invalid>
dev-sdnc     3        3        <invalid>

==> v1/Pod(related)
NAME                                       READY  STATUS             RESTARTS  AGE
dev-aaf-cs-7c5b64d884-msh74                0/1    ContainerCreating  0         <invalid>
dev-aaf-775bdc6b48-cf7fr                   0/1    Init:0/1           0         <invalid>
dev-sdnc-dgbuilder-6fdfb498f-wf7bt         0/1    Init:0/1           0         <invalid>
dev-sdnc-dmaap-listener-5998b5774c-wz24j   0/1    Init:0/1           0         <invalid>
dev-sdnc-nfs-provisioner-75dcd8c86c-qz2qh  0/1    ContainerCreating  0         <invalid>
dev-sdnc-portal-5cd7598547-46gn4           0/1    Init:0/1           0         <invalid>
dev-sdnc-ueb-listener-598c68f8d8-frbfz     0/1    Init:0/1           0         <invalid>
dev-sdnc-db-0                              0/2    Init:0/3           0         <invalid>
dev-sdnc-0                                 0/2    Init:0/1           0         <invalid>
dev-sdnc-1                                 0/2    Init:0/1           0         <invalid>
dev-sdnc-2                                 0/2    Init:0/1           0         <invalid>

==> v1/Secret
NAME                      TYPE                     DATA  AGE
dev-aaf-cs                Opaque                   0     <invalid>
dev-sdnc-dgbuilder        Opaque                   1     <invalid>
dev-sdnc-db               Opaque                   1     <invalid>
dev-sdnc-portal           Opaque                   1     <invalid>
dev-sdnc                  Opaque                   1     <invalid>
onap-docker-registry-key  kubernetes.io/dockercfg  1     <invalid>

==> v1/ConfigMap
NAME                                DATA  AGE
dev-aaf                             0     <invalid>
dev-sdnc-dgbuilder-config           1     <invalid>
dev-sdnc-dgbuilder-scripts          2     <invalid>
sdnc-dmaap-configmap                1     <invalid>
dev-sdnc-db-db-configmap            2     <invalid>
sdnc-portal-configmap               1     <invalid>
sdnc-ueb-configmap                  1     <invalid>
dev-sdnc-installsdncdb              1     <invalid>
dev-sdnc-dblib-properties           1     <invalid>
dev-sdnc-aaiclient-properties       1     <invalid>
dev-sdnc-startodl                   1     <invalid>
dev-sdnc-onap-sdnc-svclogic-config  1     <invalid>
dev-sdnc-svclogic-config            1     <invalid>
dev-sdnc-filebeat-configmap         1     <invalid>
dev-sdnc-log-configmap              1     <invalid>

==> v1/StorageClass
NAME              PROVISIONER      AGE
dev-sdnc-db-data  dev-sdnc-db/nfs  <invalid>


ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#

Downgrade helm

The helm installation procedure will put the latest version of it on your master node. Then Tiller (helm server) version will follow the helm (helm client) version and Tiller version will be also the latest.

If helm/tiller version on your K8S master node is not what ONAP installation wants, you will get “Chart incompatible with Tiller v2.9.1”. See below:

ubuntu@kanatamaster:~/oominstall/kubernetes$ helm install local/onap --name dev --namespace onap

Error: Chart incompatible with Tiller v2.9.1

ubuntu@kanatamaster:~/oominstall/kubernetes$

A temporary fix for this will be often downgrading helm/tiller. Here is the procedure:

Step 1) downgrade helm client (helm)

Download desired version (tar.gz file) form kubernetes website. Example here: https://kubernetes-helm.storage.googleapis.com/helm-v2.8.1-linux-amd64.tar.gz . You can change the version number in the file name and you will get it!
(curl https://kubernetes-helm.storage.googleapis.com/helm-v2.8.1-linux-amd64.tar.gz --output helm-v2.8.1-linux-amd64.tar.gz --silent) . (try 2.8.2, if you get the same error with 2.8.1)
Unzip and untar the file. It will create "linux-amd64" directory.
Copy helm binary file from linux-amd64 directory to /usr/local/bin/ (kill helm process if it is stopping the copy)
Run "helm version"

Step 2) downgrade helm server (Tiller)

Use helm rest, . Follow the below steps:

Code Block

language	bash

# Uninstalls 1Tiller from a cluster
helm <invalid>reset sdnc-ueb-configmapforce
 
 
# Clean up any existing artifacts
kubectl -n kube-system delete deployment tiller-deploy
kubectl 1-n kube-system delete serviceaccount tiller
<invalid>kubectl dev-sdnc-installsdncdb              1     <invalid>
dev-sdnc-dblib-properties           1     <invalid>
dev-sdnc-aaiclient-propertiesn kube-system delete ClusterRoleBinding tiller-clusterrolebinding
 

cat   1     <invalid>
dev-sdnc-startodl                   1     <invalid>
dev-sdnc-onap-sdnc-svclogic-config  1     <invalid>
dev-sdnc-svclogic-config            1     <invalid>
dev-sdnc-filebeat-configmap         1     <invalid>
dev-sdnc-log-configmap              1     <invalid>

==> v1/StorageClass
NAME              PROVISIONER      AGE
dev-sdnc-db-data  dev-sdnc-db/nfs  <invalid>


ubuntu@k8s-s1-master:/home/ubuntu/oom/kubernetes#

> tiller-serviceaccount.yaml << EOF
apiVersion: v1
kind: ServiceAccount
metadata:
  name: tiller
  namespace: kube-system
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: tiller-clusterrolebinding
subjects:
- kind: ServiceAccount
  name: tiller
  namespace: kube-system
roleRef:
  kind: ClusterRole
  name: cluster-admin
  apiGroup: ""
EOF


# Run the blow command to get the matching tiller version for helm 
kubectl create -f tiller-serviceaccount.yaml
 
# Then run init helm
helm init --service-account tiller --upgrade


# Verify
helm version


#Note: Dont forget to start helm 
nohup sudo helm serve >/dev/null 2>&1 &

Note
The --namespace onap is currently required while all onap helm charts are migrated to version 2.0. After this activity is complete, namespaces will be optional.

...

Code Block

#query existing pv in onap namespace
ubuntu@k8s-s1-master:/home/ubuntu# kubectl get pv -n onap
NAME       CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS      CLAIM     STORAGECLASS       REASON    AGE
nfs-vol1   11Gi       RWO,RWX        Retain           Bound             dev-sdnc-db-data             38s
nfs-vol2   11Gi       RWO,RWX        Retain           Bound 			dev-sdnc-db-data             34s


#Example commands are found here: 


# delete all pvc under onap
ubuntu@k8s-s1-master:/home/ubuntu# kubectl delete pvc -n onap --all


#query existing pvc in onap namespace
ubuntu@k8s-s1-master:/home/ubuntu# kubectl get pvc -n onap
NAME                             STATUS    VOLUME     CAPACITY   ACCESS MODES   STORAGECLASS       AGE
dev-sdnc-db-data-dev-sdnc-db-0   Bound     nfs-vol1   11Gi       RWO,RWX        dev-sdnc-db-data   21h
dev-sdnc-db-data-dev-sdnc-db-1   Bound     nfs-vol2   11Gi       RWO,RWX        dev-sdnc-db-data   21h


#delete existing pv
ubuntu@k8s-s1-master:/home/ubuntu# kubectl delete pv nfs-vol1 -n onap
pv "nfs-vol1" deleted
ubuntu@k8s-s1-master:/home/ubuntu# kubectl delete pv nfs-vol2 -n onap
pv "nfs-vol2" deleted


#delete existing pvc
ubuntu@k8s-s1-master:/home/ubuntu# kubectl delete pvc dev-sdnc-db-data-dev-sdnc-db-0 -n onap
pvc "dev-sdnc-db-data-dev-sdnc-db-0" deleted
ubuntu@k8s-s1-master:/home/ubuntu# kubectl delete pvc dev-sdnc-db-data-dev-sdnc-db-1 -n onap
pvc "dev-sdnc-db-data-dev-sdnc-db-1" deleted

...

Versions Compared

Old Version 46

New Version Current

Key

Downgrade helm