...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
NOTE: This is the discussion version of the Application Service Descriptor (ASD) onboarding IM. Please, refer to the released version 1.0 in the "Clean" wiki subfolder.
Introduction:
In today, many complex applications are consisting in a mixed, complex workload, that is described in many Kubernetes resources, e.g. to be run on a certain cluster, etc. In order to deploy the application, the orchestration task would be requiring dealing with different abstract layers of resources, different templates system mapping, and application packaging. Another challenge is to keep up with changes in the cloud infrastructures features enhancement mapping into abstract resource template.
...
Attribute | Qualifier | # | Content | Description |
deploymentItemId | M | 1 | Identifier | The identifier of this deployment item |
artifactType | M | 1 | String | Specifies the artifact type. One of following values can be chosen: "helm_chart", "helmfile", "crd", "terraform" |
artifactId | M | 1 | String | Reference to a DeploymentArtifact. It can refer to URI or file path. |
deploymentOrder | M | 0..1 | Integer | Specifies the deployment stage that the DeploymentArtifact belongs to. A lower value specifies that the DeploymentArtifact belongs to an earlier deployment stage, i.e. needs to be installed prior to DeploymentArtifact with higher deploymentOrder values. If not specified, the deployment of the DeploymentArtifact can be done in arbitrary order and decided bu by the orchestrator. |
lifecycleParameters | M | 0..N | String | The list of parameters that can be overridden at deployment time (e.g., the list of parameters in the values.yaml which can be overridden at deployment time) |
Note 1: All cloud native CNF resource IM is specified by particular cloud native specifications. K8s document is an example.
asdExtCpd Information Element
| Attribute | Qualifier | Cardinality | Content | Description |
|---|---|---|---|---|
| id | M | 1 | String | The identifier of this extCpdData |
| description | M | 1 | String | Describes the service exposed. |
| virtualLinkRequirement | M | 1..N | String | Refers in an abstract way to the network or multiple networks that the ExtCpd shall be exposed on (ex: OAM, EndUser, backhaul, LI, etc). The intent is to enable a network operator to take decision on to which actual VPN to connect the extCpd to. NOTE 1. |
| networkInterfaceRealizationRequirements | M | 0..1 | datatype.networkInterfaceRealizationRequirements | Details container implementation specific requirements on the NetworkAttachmentDefinition to . See NOTE 2 & 3. |
| inputParamMappings | M | 0..1 | datatype.extCpd.ParamMappings | Information on what parameters that are required to be provided to the deployment tools for the asdExtCpd instance. |
| resourceMapping | M | 0..1 | String | Kubernetes API resource name for the resource manifest as specified e.g. in helm.chart for the service, ingress or pod resource declaring the network interface. Enables, together with knowledge on namespace, the orchestrator to lookup the runtime data related to the extCpd. |
NOTE 1: Corresponds more or less to a virtual_link requirement in ETSI NFV SOL001.
NOTE 2: Applies only for ExtCpds representing secondary network interfaces in a pod.
NOTE 3: Several ExtCpd may refer to same additional network interface requirements.
networkInterfaceRealizationRequirements Information Element
| Attribute | Qualifier | Cardinality | Content | Description |
|---|---|---|---|---|
| trunkMode | M | 0..1 | ”false” | ”true” | If not present or set to”false”, means that this interface shall connect to single network. If set to ”true” then the network interface shall be a trunk interface (connects to multiple VLANS). |
| ipam | M | 0..1 | "infraProvided", "orchestrated", "userManaged" | The default value ("infraProvided") means that the CNI specifies how IPAM is done and assigns the IP address to the pod interface. |
| interfaceType | M | 0..1 | "kernel.netdev", "direct.userdriver", "direct.kerneldriver", "direct.bond", "userspace | This attribute is applicable for passthrough and memif interfaces. Value default value is ”kernel.netdev”. |
| interfaceOptions | M | 0..N | "virtio", | Alternative vNIC configurations the network interface is verified to work with. |
| interfaceRedundancy | M | 0..1 | "infraProvided", "activePassiveBond", "activeActiveBond", "activePassiveL3", "activeActiveL3", ”bondCni”, "Left", "Right" | ”infraProvided” means that the application sees one vNIC but that the infrastruture provides redundant access to the network via both switch planes. ”Left” and ”right” indicates a vNIC connected non-redundantly to the network via one specific (left or right) switchplane. All other attributes indicates a mated vNIC pair in the Pod, one connecting to the network via left switchplane and the other connecting to the network via the right switchplane, and with application using them together as a redundant network interface using a particular redundancy method that need to be accomodated in the node infrastructure. |
| nicOptions | M | 0..N | "examples": ["i710", "mlx-cx5v"] | nics a direct user space driver the application is verified to work with. Allowed values from ETSI registry. |
datatype.ExtCpd.ParamMappings Information Element
...
Note 2: The format of the Content strings is specific for each different orchestration templating technology used (Helm, Teraform, etc.). Currently only a format for use with Helm charts is suggested: "helmchartname<helmchartname>:[<subchartname>.]0..N[<parentparamname>.]0..N[<paramname>]”. Whether the optional parts of the format are present depends on how the parameter is declared in the helm chart. An example is: "chartName:subChart1.subChart2.subChart3.Parent1.Parent2.Parent3.parameter".
...
- Initial proposal and the background information can be found at: Application Service Descriptor (ASD) and packaging Proposals for CNF - Developer Wiki - Confluence (onap.org)