...
| Code Block | ||||
|---|---|---|---|---|
| ||||
tosca.datatypes.nfv.L3AddressData:
derived_from: tosca.datatypes.Root
description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP
properties:
ip_address_assignment:
type: boolean
description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
floating_ip_activated:
type: boolean
description: Specifies if the floating IP scheme is activated on the Connection Point or not
required: true
ip_address_type:
type: string
description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp
required: false
constraints:
- valid_values: [ ipv4, ipv6 ]
number_of_ip_address:
type: integer
description: Minimum number of IP addresses to be assigned
required: false
constraints:
- greater_than: 0
#fixed_ip_address: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1
# type:list
# entry_schema:
# type:string
# required: false |
| Code Block | ||||
|---|---|---|---|---|
| ||||
tosca.datatypes.nfv.AddressData: derived_from: tosca.datatypes.Root description: Describes information about the addressing scheme and parameters applicable to a CP properties: address_type: type: string description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point required: true constraints: - valid_values: [ mac_address, ip_address ] l2_address_data: type: tosca.datatypes.nfv.L2AddressData description: Provides the information on the MAC addresses to be assigned to a connection point. required: false l3_address_data: type: tosca.datatypes.nfv.L3AddressData description: Provides the information on the IP addresses to be assigned to a connection point required: false |
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
tosca.datatypes.nfv.VduProfile:
derived_from: tosca.datatypes.Root
description: describes additional instantiation data for a given Vdu.Compute used in a specific deployment flavour.
properties:
min_number_of_instances:
type: integer
description: Minimum number of instances of the VNFC based on this Vdu.Compute that is permitted to exist for a particular VNF deployment flavour.
required: true
constraints:
- greater_or_equal: 0
max_number_of_instances:
type: integer
description: Maximum number of instances of the VNFC based on this Vdu.Compute that is permitted to exist for a particular VNF deployment flavour.
required: true
constraints:
- greater_or_equal: 0
| ||||
| Code Block | ||||
| ||||
tosca.datatypes.nfv.VlProfile: derived_from: tosca.datatypes.Root description: Describes additional instantiation data for a given VL used in a specific VNF deployment flavour. properties: max_bitrate_requirements: type: tosca.datatypes.nfv.LinkBitrateRequirements description: Specifies the maximum bitrate requirements for a VL instantiated according to this profile. required: true min_bitrate_requirements: type: tosca.datatypes.nfv.LinkBitrateRequirements description: Specifies the minimum bitrate requirements for a VL instantiated according to this profile. required: true qos: type: tosca.datatypes.nfv.Qos description: Specifies the QoS requirements of a VL instantiated according to this profile. required: false virtual_link_protocol_data: type: list #watchdog: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1 # type: string # required: true #vmBootUpTimeOut: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1 # type: integer # required: optional |
| Code Block | ||||
|---|---|---|---|---|
| ||||
tosca.datatypes.nfv.VlProfile: derived_from: tosca.datatypes.Root description: Describes additional instantiation data for a given VL used in a specific VNF deployment flavour. properties: max_bitrate_requirements: type: tosca.datatypes.nfv.LinkBitrateRequirements description: Specifies the protocolmaximum bitrate datarequirements for a virtual link VL instantiated according to this profile. required: falsetrue entrymin_bitrate_schemarequirements: type: tosca.datatypes.nfv.VirtualLinkProtocolData | ||||
| Code Block | ||||
| ||||
tosca.datatypes.nfv.VirtualLinkProtocolData: derived_from: tosca.datatypes.Root description: describes one protocol layer and associated protocol data for a given virtual link used in a specific VNF deployment flavour properties: associated_layer_protocol: type: string description: Identifies one of the protocols a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire) as specified by the connectivity_type property. required: true constraints: - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ] l2_protocol_data: type:LinkBitrateRequirements description: Specifies the minimum bitrate requirements for a VL instantiated according to this profile. required: true qos: type: tosca.datatypes.nfv.Qos description: Specifies the QoS requirements of a VL instantiated according to this profile. required: false virtual_link_protocol_data: type: list description: Specifies the protocol data for a virtual link. required: false entry_schema: type: tosca.datatypes.nfv.VirtualLinkProtocolData |
| Code Block | ||||
|---|---|---|---|---|
| ||||
tosca.datatypes.nfv.VirtualLinkProtocolData:
derived_from: tosca.datatypes.Root
description: describes one protocol layer and associated protocol data for a given virtual link used in a specific VNF deployment flavour
properties:
associated_layer_protocol:
type: string
description: Identifies one of the protocols a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire) as specified by the connectivity_type property.
required: true
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
l2_protocol_data:
type: tosca.datatypes.nfv.L2ProtocolData
description: Specifies the L2 protocol data for a virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L2 protocol and shall be absent otherwise.
required: false
l3_protocol_data:
type: tosca.datatypes.nfv.L3ProtocolData
description: Specifies the L3 protocol data for this virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L3 protocol and shall be absent otherwise.
required: false |
| Code Block | ||||
|---|---|---|---|---|
| ||||
tosca.datatypes.nfv.L2ProtocolData : derived_from: tosca.datatypes.Root description: Specifies thedescribes L2 protocol data for a given virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L2 protocol and shall be absent otherwise. used in a specific VNF deployment flavour. properties: name: type: string description: Identifies the network name associated with this L2 protocol. required: false l3_protocolnetwork_datatype: type: tosca.datatypes.nfv.L3ProtocolData string description: Specifies the L3network protocoltype data for this virtualL2 linkprotocol. The value Shallmay be overridden present when the associatedLayerProtocol attribute indicates a L3 protocol and shall be absent otherwise. required: false | ||||
| Code Block | ||||
| ||||
tosca.datatypes.nfv.L2ProtocolData: derived_from: tosca.datatypes.Root description: describes L2 protocol data for a given virtual link used in a specific VNF deployment flavour. properties: nameat run-time. required: false constraints: - valid_values: [ flat, vlan, vxlan, gre ] vlan_transparent: type: boolean description: Specifies whether to support VLAN transparency for this L2 protocol or not. required: false default: false mtu: type: stringinteger description: IdentifiesSpecifies the maximum network name associated withtransmission unit (MTU) value for this L2 protocol. required: false network_type: type: string description: Specifies the network type for this L2 protocol.The value may be overridden at run-time. required: false constraints: - valid_values: [ flat, vlan, vxlan, gre ] vlan_transparent: type: boolean description: Specifies whether to support VLAN transparency for this L2 protocol or not. required: false default: false mtu: type: integer description: Specifies the maximum transmission unit (MTU) value for this L2 protocol. required: false constraints: - greater_than: 0 constraints: - greater_than: 0 #segmentation_id: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1 # type: Integer # required: false #physical_network: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1 # type: String # required: false |
| Code Block | ||||
|---|---|---|---|---|
| ||||
tosca.datatypes.nfv.L3ProtocolData: derived_from: tosca.datatypes.Root description: describes L3 protocol data for a given virtual link used in a specific VNF deployment flavour. properties: name: type: string description: Identifies the network name associated with this L3 protocol. required: false ip_version: type: string description: Specifies IP version of this L3 protocol.The value of the ip_version property shall be consistent with the value of the layer_protocol in the connectivity_type property of the virtual link node. required: true constraints: - valid_values: [ ipv4, ipv6 ] cidr: type: string description: Specifies the CIDR (Classless Inter-Domain Routing) of this L3 protocol. The value may be overridden at run-time. required: true ip_allocation_pools: type: list description: Specifies the allocation pools with start and end IP addresses for this L3 protocol. The value may be overridden at run-time. required: false entry_schema: type: tosca.datatypes.nfv.IpAllocationPool gateway_ip: type: string description: Specifies the gateway IP address for this L3 protocol. The value may be overridden at run-time. required: false dhcp_enabled: type: boolean description: Indicates whether DHCP (Dynamic Host Configuration Protocol) is enabled or disabled for this L3 protocol. The value may be overridden at run-time. required: false ipv6_address_mode: type: string description: Specifies IPv6 address mode. May be present when the value of the ipVersion attribute is "ipv6" and shall be absent otherwise. The value may be overridden at run-time. required: false constraints: - valid_values: [ slaac, dhcpv6-stateful, dhcpv6-stateless ] |
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
tosca.datatypes.nfv.VnfProfile: derived_from: tosca.datatypes.Root description: describes a profile for instantiating VNFs of a particular NS DF according to a specific VNFD and VNF DF. properties: instantiation_level: type: string description: Identifier of the instantiation level of the VNF DF to be used for instantiation. If not present, the default instantiation level as declared in the VNFD shall be used. required: false min_number_of_instances: type: integer description: Minimum number of instances of the VNFD shall be used. required: false min VNF based on this VNFD that is permitted to exist for this VnfProfile. required: true constraints: - greater_or_equal: 0 max_number_of_instances: type: integer description: MinimumMaximum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile. required: true constraints: - greater_or_equal: 0 max_number_of_instances: type: integer description: Maximum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile. required: true constraints: - greater_or_equal: 0 this VNFD that is permitted to exist for this VnfProfile. required: true constraints: - greater_or_equal: 0 |
| Code Block | ||||
|---|---|---|---|---|
| ||||
#tosca.datatypes.nfv.injectFile: #Introduced from Beijing release, only used for vCPE usecase, outside the scope of SOL001 v2.5.1
# derived_from: tosca.datatypes.Root
# properties:
# source_path:
# type: string
# required: true
# dest_path:
# type:string
# required: true |