...

Environments

Name/IP/Port to access from jenkins/robotframework

Environment

Location

• Repository for robot test scripts and test plans: https://git-highstreet-technologies.com/highstreet/CICD_environment/onap-csit/tree/master/plans/sdnr/local
  • Parts used for integration test are in subdirectory: "local"
• Repository for setup of integration test: https://git-highstreet-technologies.com/highstreet/ccsdk/tree/master/integration
• OSNL Based (https://www.osn-lab.com/) access required to be able to follow the links below
• Jenkins/robot framework scripts: http://10.20.6.10:30080/view/ONAP_SDNR_WT_FRANKFURT/job/60_device_onboarding_Frankfurt/
• Docker-image:  http://10.20.6.10:30000/v2/highstreet/robot/tags/list 
• ntsim: https://github.com/Melacon/ntsim/tree/master/ntsimulator

Infrastructure Basic information

• Server "Test VM": sdnr-frankfurt-int 10.20.5.5 provides docker based test environment
• Static environment for otto
  • oran NTS_Manager 8300 baseport 50000 dir 3gppsim
  • gran NTS_Manager_3GPP 9300 baseport 60000 dir oransim
• Static environment for frankfurt development build robot
  • oran Robot_NTS_Manager 8200 basport baseport 55000 dir robot-nts-manager 
• Integration test environment
  • Jenkins entry: INT_SDNC_Frankfurt
  • Port ranges 8310 .. 8499, 40000 .. 49999
  • ntssim oran 8310, 40000 .. 40019
• Docker internal static IP assignment in "integration" network (172.40.0.0/16) with names for /etc/hosts of docker host.
  • 172.40.0.20 sdnrinit
  • 172.40.0.21 sdnr
  • 172.40.0.22-24 sdnr-0, sdnr-1, sdnr-2
  • 172.40.0.30 sdnrdb
  • 172.40.0.40 Netconfserversimulator172.40.0.50 NTSimulator
  • 172.40.0.60 Zookeeper
  • 172.40.0.70 Kafka
  • 172.40.0.80 DMaaP
  • 172.40.0.90 VESCollector
• NTSim/ORan is using its own network. Communication takes place over the host IP and the mapped ports.
  • 172.17.02 container with 10 ORan devices
• Access to services from outsite are running over the host IP

Container specific information

Simulators

NTSim ORAN

...

• . See table.

Network setup

Development (old environment)

• docker for networking, run containers
• docker-compose starting a structure
• bash initialization
• manual execution of development tests

Test cases

Executed by Jenkins (http://10.20.6.10:30080/view/INT_SDNC_FRANKFURT/) job: INT_SDNC_Frankfurt

Test case "Mount devices" (basic) >available<

• Startup
  • Mount NTSim manager
  • Create and mount two NTSim/"oran" devices
• Test steps
  • Verify that mount of the two devices was successfully done

Test case "Mount and get alarms for 50 devices" (load)

• Startup
  • Mount 10 devices at a time
  • Mount with delay next 10 devices till we have the 50
• Test seps
  • wait till startup is done
  • count the current alarms
  • Test Ok if current alarms count in a expected range.

Test case "Inventory" (functional)

• Startup
  • Create docker network
    • a static network setup with static IPs for the containers
    • add name to hosts and use this names
  • start docker - Simulator (e.g. Sim12600 with equipment)
  • start docker - DB
  • start docker - SDNC
• Test steps
  • mount sim12600
  • Read over the RESTCONF Interface via data-provider the equipment
  • Compare if it is the expected data

Network Topology Simulator

Instantiating NetConf simulators

• New NetConf simulators can be instantiated using the NTS Manager as follows - 
  • Create a mountpoint in SDNR to mount the NTS Manager with the following parameters - 
    • Name - "NTS_Manager" (No double quotes. Any name is OK, see below)
    • IP Address - NTS Manager Docker container IP or Host IP of the Docker container
    • Port - NTS Manager Docker container port or the port mapped to the Host
    • Username - netconf
    • Password - netconf
  • Next, Use any REST Client to send PUT requests
  • Set the "content-type" to "Application/json"
  • Copy the following json into the body of the REST request - 

{
       "simulator-config": {
                  "mounted-devices": 0,
                  "notification-config": {
                         "fault-notification-delay-period": 0,
                         "is-netconf-available": true,
                         "is-ves-available": true,
                         "ves-heartbeat-period": 0
                   },
                  "simulated-devices": 0, # Toggle this value between 0 and any number greater than 0 to create and remove docker containers that send pnfRegistration VES messages to a VES Collector whose IP is                                                                           # configured using the "ves-endpoint-ip" field below
                  "ves-endpoint-details": {
                          "ves-endpoint-port": 8080,
                          "ves-registration": true,
                          "ves-endpoint-auth-method": "no-auth",
                          "ves-endpoint-ip": "10.20.5.5"
                  },
                 "controller-details": {
                          "controller-ip": "172.40.0.21",
                          "controller-port": 8181,
                          "controller-username": "admin",
                          "controller-password": "admin"
                 }
       }
}

•  Set the URL to - http://<SDNR-IP>:<SDNR-PORT>/restconf/config/network-topology:network-topology/topology/topology-netconf/node/<NTS Manager Mountpoint Name>/yang-ext:mount/network-topology-simulator:simulator-config
• Submit the request
• A "docker ps" should display new docker container(s) created with 10 ports per container, representing the simulated device(s)