Table of Contents

outline	true

Introduction and Approach

In BBS, notifications generated by the domain specific M&C (Access, Edge) into ONAP using the capabilities provided by ONAP's DCAE component and supported collectors that map the notifications into VES events for processing within ONAP.

For this release, BBS uses Restconf Collector to collect the notifications, converting the notification into the requisite VES event by the VES Mapper uS. The VES event placed on the DMaaP bus with a topic that can be consumed by the associated DCAE uS for processing. In many cases the DCAE uS uses ONAP's Policy capabilities to implement the function specific to the notification. The specific interactions are documented within the corresponding notification as identified below.

Supported Notifications

The primary scenarios for notifications within BBS are to support:

Registration and Re-registration of CPE PNFs (e.g., ONT) used to support the Nomadic ONT scenario
Authentication state change of the gatewa y (e.g., residential) functionality associated with CPE PNFs that updates the operational state of the HSIA CFS.

Common Functionality

BBS Notifications have functionality provided by ONAP components that is used by multiple BBS Notifications

DCAE

Restconf Collector

Notifications from domain specific controllers (Access, Edge) can be transmitted to ONAP using ONAP's Restconf collector leveraging the APIs specified in CCVPN Closed Loop.

Image Removed

Figure 2. Domain Controller ↔ Restconf Collector Interfacing Diagram

For BBS Notifications, the Restconf collector subscribes to notifications to the requisite domain controller (Access, Edge) for the notifications that ONAP is interested and the domain controller supports. For subscribed notifications, the Restconf Collector establishes a persistent connection with the domain controller through which the notifications are pushed by the domain controller to the Restconf Collector. The Restconf Collector then adds an OID for the Restconf2VES,xml file which is used to translate the event to the standard VES format by the VES Mapper and is published using the topic associated with the VES Event.

The association happens at design time to build JSON message with different topics of the Restconf_Notification with a certain Restconf2VES XML file indicator. In addition, the domain controller's IP/port, authentication information and produced topic could be assigned at design time at blue print creation through DCAE-DS and configurable at control loop creation time from CLAMP.

Image Removed

VES=VES Collector RCC=Restconf Collector thread UVA=Universal VES Adaptor thread SSE=SSE Connection

ORN=ONT Registration Notification RN=Restconf Notification topic PNF_R=PNF Registration Event

CPE_A=CPE Authentication Event PRH=PNF Registration Handler BBS MS= BBS Micro-service

Figure 3. Logic flow of Restconf Collector through the VES Mapper

Example Domain Controller Notifications

The following provides examples of various notifications that are generated by the domain controllers (Access or Edge SDN M&C).

ONT Registration Notification

Following is an example of ONT Registration notification received from Access SDN M&C.

Code Block

language	text
firstline	1
title	ONT Registration Notification
linenumbers	true
collapse	true

[ { “notification” : { “event-time”: ”2018-03-15T08:15:32.000Z”, “notification-id”: ”2541256”, “message”: { “topic”：“resource”, “object-type”：“ont”, “version”: ”v1”,

Table of Contents

outline	true

Introduction and Approach

In BBS, notifications generated by the domain specific M&C (Access, Edge) into ONAP using the capabilities provided by ONAP's DCAE component and supported collectors that map the notifications into VES events for processing within ONAP.

For this release, BBS uses Restconf Collector to collect the notifications, converting the notification into the requisite VES event by the VES Mapper uS. The VES event placed on the DMaaP bus with a topic that can be consumed by the associated DCAE uS for processing. In many cases the DCAE uS uses ONAP's Policy capabilities to implement the function specific to the notification. The specific interactions are documented within the corresponding notification as identified below.

Supported Notifications

The primary scenarios for notifications within BBS are to support:

Registration and Re-registration of CPE PNFs (e.g., ONT) used to support the Nomadic ONT scenario
Authentication state change of the gatewa y (e.g., residential) functionality associated with CPE PNFs that updates the operational state of the HSIA CFS.

Common Functionality

BBS Notifications have functionality provided by ONAP components that is used by multiple BBS Notifications

DCAE

Restconf Collector

Notifications from domain specific controllers (Access, Edge) can be transmitted to ONAP using ONAP's Restconf collector leveraging the APIs specified in CCVPN Closed Loop.

Image Added

Figure 2. Domain Controller ↔ Restconf Collector Interfacing Diagram

For BBS Notifications, the Restconf collector subscribes to notifications to the requisite domain controller (Access, Edge) for the notifications that ONAP is interested and the domain controller supports. For subscribed notifications, the Restconf Collector establishes a persistent connection with the domain controller through which the notifications are pushed by the domain controller to the Restconf Collector. The Restconf Collector then adds an OID for the Restconf2VES,xml file which is used to translate the event to the standard VES format by the VES Mapper and is published using the topic associated with the VES Event.

The association happens at design time to build JSON message with different topics of the Restconf_Notification with a certain Restconf2VES XML file indicator. In addition, the domain controller's IP/port, authentication information and produced topic could be assigned at design time at blue print creation through DCAE-DS and configurable at control loop creation time from CLAMP.

Image Added

VES=VES Collector RCC=Restconf Collector thread UVA=Universal VES Adaptor thread SSE=SSE Connection

ORN=ONT Registration Notification RN=Restconf Notification topic PNF_R=PNF Registration Event

CPE_A=CPE Authentication Event PRH=PNF Registration Handler BBS MS= BBS Micro-service

Figure 3. Logic flow of Restconf Collector through the VES Mapper

Example Domain Controller Notifications

The following provides examples of various notifications that are generated by the domain controllers (Access or Edge SDN M&C).

ONT Registration Notification

Following is an example of ONT Registration notification received from Access SDN M&C.

Code Block

language	text
firstline	1
title	ONT Registration Notification
linenumbers	true
collapse	true

{
	“notification”:	{
		“event-time”: ”2018-03-15T08:15:32.000Z”,
		“notification-id”:  ”2541256”,
        “message”:	{
			“topic”：“resource”,
           “operation”: “Create”“object-type”：“onu”,               
 “target”			“version”: ”ont/ont=23hk1231231232””v1”,               
 “content”			“operation”: “create”,   
			“target”: ”ont/ont=23hk1231231232”,   
			“content”:	{
				“onu”:	{
					"sn":	"48575443FA637D1A",
					"refParentNE":	"550e8400-e29b-41d4-a716-446655440000",
      {                     “ont”:	"refParentNeNativeId":	"FDN",
					"refParentLTP":	"8c0db89e-218c-4e18-b0de-7a6788b3dda4",
					"refParentLTPNativeId":	"FDN",
      				"onuId": "213",
               {     "accessID":	"HG65875420001"
				}
			}
		}
	}
}

The output of Restconf Collector for the ONT Registration is the above JSON message with certain rule_id being published on DMAAP with topic of restConf_Notification.

Code Block

language	text
firstline	1
title	ONT Registration RCC Output
linenumbers	true
collapse	true

{
    "rule-id": "12121",
	“notification”:	{
		“event-time”: ”2018-03-15T08:15:32.000Z”,
		“notification-id”:  ”2541256”,
        “message”:	{
			“topic”：“resource”,
            “object-type”：“onu”,  “ontSN”：“48575443FA637D1A”,             
			“version”: ”v1”,               
			“operation”: “create”,   
 “neName”：“MA5800T-001”			“target”: ”ont/ont=23hk1231231232”,   
			“content”:	{
				“onu”:	{
					"sn":	"48575443FA637D1A",
					"refParentNE":	"550e8400-e29b-41d4-a716-446655440000",
                 “neUNIPort”：“0/1/6”,  	"refParentNeNativeId":	"FDN",
					"refParentLTP":	"8c0db89e-218c-4e18-b0de-7a6788b3dda4",
					"refParentLTPNativeId":	"FDN",
      				"onuId": "213",
            “onuID”：“101”                      }
                }
            }
        }
    }
]

The output of Restconf Collector for the ONT Registration is the above JSON message with certain rule_id being published on DMAAP with topic of restConf_Notification.

Code Block
"accessID": "HG65875420001" } } } } }

RG Activation Notification

Following is an example of RG Activation notification received from Edge SDN M&C domain controller if the interface between DCAE and the domain controller is RestConf/Yang. In Dublin release, an Edge SDN M&C simulator is provided by SwissCom development team, which will interfacing with DCAE through VES Rest API and VES CPE Authentication event will be delivered to DCAE directly.

Code Block

language	text
firstline	1
title	ONT Registration RCC OutputRG Activation Notification
linenumbers	true
collapse	true

  [
	{  	 "rule_id" : "example id"{
     },     {“notification”
     “notification” :    {
    {          “event-time”:  ”2018-0304-15T08:15:32.000Z”,
              “notification-id”:  ”2541256”,
         “message”:     “message”:
       {       {
         “topic”：“resource”,          “topic”：“resource”,
      “object-type”：“ont”,            “object-type”：“Gateway”,
                   “version”: ”v1”,
                  “operation”: “Create”,
                  “target”: ”ont"Gateway/ontsn=23hk1231231232”83575443FA637D1A”,
                  “content” :
                  {
 {                     “ont”“Gateway”:
                      {
{                          “gatewaySN”：“83575443FA637D1A”,                         “ontSN”：“48575443FA637D1A”,          
                          “neName”：“MA5800T-001”“mac”：“28-6E-D4-89-34-DD”,               
         “neUNIPort”：“0/1/6”,                 “pppoeUserName”: ”587564@163.com”,       “onuID”：“101”         
            }              “ip”: "10.68.52.158”,
                         } “state”:”Online”,
           }         }     }
]

RG Activation Notification

Following is an example of RG Activation notification received from Edge SDN M&C domain controller if the interface between DCAE and the domain controller is RestConf/Yang. In Dublin release, an Edge SDN M&C simulator is provided by SwissCom development team, which will interfacing with DCAE through VES Rest API and VES CPE Authentication event will be delivered to DCAE directly.

Code Block

language	text
firstline	1
title	RG Activation Notification
linenumbers	true
collapse	true

  [ “ontSN”：“48575443FA637D1A”                            
                {      }     “notification”           {
              “event-time”:  ”2018-04-15T08:15:32.000Z”,  }
            “notification-id”:  ”2541256”,}
          }
   “message”:   }           
{
           ]

The output of Restconf Collector for the RG Activation could be the above JSON message with certain rule_id being published on DMAAP with topic of restConf_Notification.

Code Block

language	text
firstline	1
title	RG Activation RCC Output
linenumbers	true
collapse	true

[
	  {
	  "rule_id" : "example id" 

      “topic”：“resource”},
      {
          “notification”
“object-type”：“Gateway”,          {
        “version”: ”v1”,     “event-time”:  ”2018-04-15T08:15:32.000Z”,
           “operation”: “Create”,  “notification-id”:  ”2541256”,
              “target”“message”:
"Gateway/sn=83575443FA637D1A”,              {
    “content” :             “topic”：“resource”,
     {              “object-type”：“Gateway”,
        “Gateway”:          “version”: ”v1”,
            {      “operation”: “Create”,
                   “gatewaySN”：“83575443FA637D1A”“target”: "Gateway/sn=83575443FA637D1A”,
                  “content” :
                  {
                      “mac”：“28-6E-D4-89-34-DD”,“Gateway”:
                      {
                  “pppoeUserName”: ”587564@163.com”,       “gatewaySN”：“83575443FA637D1A”,                                   
“ip”: "10.68.52.158”,                           “state”:”Online”,“mac”：“28-6E-D4-89-34-DD”,               
               “ontSN”：“48575443FA637D1A”           “pppoeUserName”: ”587564@163.com”,                
                          “ip”: "10.68.52.158”,
        }                  “state”:”Online”,
                }          “ontSN”：“48575443FA637D1A”     }           }       }     
        ]

The output of Restconf Collector for the RG Activation could be the above JSON message with certain rule_id being published on DMAAP with topic of restConf_Notification.

VES Mapper

Code Block

language	text
firstline	1
title	RG Activation RCC Output
linenumbers	true
collapse	true

[ 	  { 	  "rule_id" : "example id"     }    },       {     
     “notification”           {  }
            “event-time”:  ”2018-04-15T08:15:32.000Z”,}
          }
   “notification-id”:  ”2541256”, }           
  “message”:
              {
                  “topic”：“resource”,
                  “object-type”：“Gateway”,
                  “version”: ”v1”,
                  “operation”: “Create”,
    ]

VES Mapper

Restconf2VES Mapping

The Restconf2VES mapping rule (*.xml) is provided by the vendor for certain type of notification for ONT and defined as the following:

The ONT Registration Notification is mapped to VES PNF Registration Event .

The default mapping artifact (xml file) name is specified at the design time in VES Mapper micro-service blueprint at DCAE-DS and it is configurable through CLAMP at control loop creation time. The pre-condition is that the mapping file with correct naming convention should be available or on-boarded and stored in ONAP at design time. When the Nomadic ONT control loop is deployed, the mapping files retrievable and loaded to VES Mapper working space.

Code Block

language	text
firstline	1
title	Mapping File for ONT Registration
linenumbers	true
collapse	true

<?xml version="1.0" encoding="UTF-8"?>
<smooks-resource-list xmlns="http://www.milyn.org/xsd/smooks-1.1.xsd" xmlns:jb="http://www.milyn.org/xsd/smooks/javabean-1.4.xsd" xmlns:json="http://www.milyn.org/xsd/smooks/json-1.1.xsd">
   <json:reader rootName="vesevent" keyWhitspaceReplacement="-">
             “target”: "Gateway/sn=83575443FA637D1A”,<json:keyMap>
         <json:key from="date&amp;time" to="date-and-time" />
      “content” </json:keyMap>
   </json:reader>
   <jb:bean class="org.onap.dcaegen2.ves.domain.VesEvent" beanId="vesEvent" createOnElement="vesevent">
       {
 <jb:wiring property="event" beanIdRef="event" />
   </jb:bean>
   <jb:bean class="org.onap.dcaegen2.ves.domain.Event" beanId="event" createOnElement="vesevent">
         “Gateway”<jb:wiring property="commonEventHeader" beanIdRef="commonEventHeader" />
      <jb:wiring property="pnfRegistrationFields" beanIdRef="pnfRegistrationFields" />
    </jb:bean>
    {
 <jb:bean class="org.onap.dcaegen2.ves.domain.CommonEventHeader" beanId="commonEventHeader" createOnElement="vesevent">
      <jb:expression property="version">"3.0"</jb:expression>
      <jb:expression property="eventType">"pnfRegistration"</jb:expression>
      <jb:expression  “gatewaySN”：“83575443FA637D1A”,property="vesEventListenerVersion">"7.0"</jb:expression>
      <jb:expression property="eventId" execOnElement="vesevent">"registration_"+commonEventHeader.ts1</jb:expression>
      <jb:expression property="reportingEntityName">"VESMapper"</jb:expression>
        <jb:expression property="domain">"pnfRegistration"</jb:expression>
      <jb:expression property="eventName" execOnElement="vesevent">commonEventHeader.domain</jb:expression>
      <jb:value property="sequence" data="0" default="0" decoder="Long" />
      <jb:expression    property="lastEpochMicrosec" execOnElement="vesevent">commonEventHeader.ts1</jb:expression>
    “mac”：“28-6E-D4-89-34-DD”,  <jb:expression property="startEpochMicrosec" execOnElement="vesevent">commonEventHeader.ts1</jb:expression>
      <jb:expression property="priority">"Normal"</jb:expression>
      <jb:value     property="sourceName" data="notification/message/target" />
   </jb:bean>
   <jb:bean class="org.onap.dcaegen2.ves.domain.PnfRegistrationFields" beanId="pnfRegistrationFields" createOnElement="vesevent">
      “pppoeUserName”<jb: ”587564@163.com”,expression property="pnfRegistrationFieldsVersion">"2.0"</jb:expression>
          <jb:value property="serialNumber" data="notification/message/content/ont/ontSN" />
   </jb:bean>
</smooks-resource-list>

Below is the VES event for ONT Registration :

Code Block

language	text
firstline	1
title	VES Event for ONT Registration
linenumbers	true
collapse	true

{
    "event":{
      "commonEventHeader":{
              “ip”: "10.68.52.158”"domain":"pnfRegistration",
         "eventId":"registration_1550146312489",
                “state”:”Online”"eventName":"pnfRegistration",
         "lastEpochMicrosec":1.550146312489E12,
         "priority":"Normal",
      “ontSN”：“48575443FA637D1A”   "reportingEntityName":"VESMapper",
         "sequence":0,
         "sourceName":"ont/ont=23hk1231231232",
         "startEpochMicrosec":1.550146312489E12,
         "version":3.0,
       }  "eventType":"pnfRegistration",
         "vesEventListenerVersion":"7.0"
      },
       "pnfRegistrationFields":{
       }  "pnfRegistrationFieldsVersion":"2.0",
         "serialNumber":"48575443FA637D1A"
  }    }
      }
      }           
  ]

Restconf2VES Mapping

The Restconf2VES mapping rule (*.xml) is provided by the vendor for certain type of notification for ONT and defined as the following:

Code Block

language	text
firstline	1
title	restconf2VES.xml
linenumbers	true
collapse	true

<?xml version="1.0" encoding="UTF-8"?>
<smooks-resource-list xmlns="http://www.milyn.org/xsd/smooks-1.1.xsd" xmlns:jb="http://www.milyn.org/xsd/smooks/javabean-1.4.xsd" xmlns:json="http://www.milyn.org/xsd/smooks/json-1.1.xsd">
   <json:reader rootName="vesevent" keyWhitspaceReplacement="-">
      <json:keyMap>
         <json:key from="date&amp;time" to="date-and-time" />
      </json:keyMap>
   </json:reader>
   <jb:bean class="org.onap.dcaegen2.ves.domain.VesEvent" beanId="vesEvent" createOnElement="vesevent">
      <jb:wiring property="event" beanIdRef="event" />
   </jb:bean>
   <jb:bean class="org.onap.dcaegen2.ves.domain.Event" beanId="event" createOnElement="vesevent">
      <jb:wiring property="commonEventHeader" beanIdRef="commonEventHeader" />
      <jb:wiring property="pnfRegistrationFields" beanIdRef="pnfRegistrationFields" />
   </jb:bean>
   <jb:bean class="org.onap.dcaegen2.ves.domain.CommonEventHeader" beanId="commonEventHeader" createOnElement="vesevent">
      <jb:expression property="version">"3.0"</jb:expression>
      <jb:expression property="eventType">"pnfRegistration"</jb:expression>
      <jb:expression property="vesEventListenerVersion">"7.0"</jb:expression>
      <jb:expression property="eventId" execOnElement="vesevent">"registration_"+commonEventHeader.ts1</jb:expression>
      <jb:expression property="reportingEntityName">"VESMapper"</jb:expression>
      <jb:expression property="domain">"pnfRegistration"</jb:expression>
      <jb:expression property="eventName" execOnElement="vesevent">commonEventHeader.domain</jb:expression>
      <jb:value property="sequence" data="0" default="0" decoder="Long" />
      <jb:expression property="lastEpochMicrosec" execOnElement="vesevent">commonEventHeader.ts1</jb:expression>
      <jb:expression property="startEpochMicrosec" execOnElement="vesevent">commonEventHeader.ts1</jb:expression>
      <jb:expression property="priority">"Normal"</jb:expression>
      <jb:value property="sourceName" data="notification/message/target" />
   </jb:bean>
   <jb:bean class="org.onap.dcaegen2.ves.domain.PnfRegistrationFields" beanId="pnfRegistrationFields" createOnElement="vesevent">
      <jb:expression property="pnfRegistrationFieldsVersion">"2.0"</jb:expression>
      <jb:value property="serialNumber" data="notification/message/content/ont/ontSN" />
   </jb:bean>
</smooks-resource-list>

The ONT Registration Notification is mapped to VES PNF Registration Event .

The default mapping artifact (xml file) name is specified at the design time in VES Mapper micro-service blueprint at DCAE-DS and it is configurable through CLAMP at control loop creation time. The pre-condition is that the mapping file with correct naming convention should be available or on-boarded and stored in ONAP at design time. When the Nomadic ONT control loop is deployed, the mapping files retrievable and loaded to VES Mapper working space.

...

Test Cases

High Level Test Cases and Status:

#

Sub Module

Test Cases

Status

1

Restconf Collector

Jira Legacy

server	System Jira
columns	key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverId	4733707d-2057-3a0f-ae5e-4fd8aff50176
key	DCAEGEN2-1142

PTLVijay Kumar

SSE connection per notification type

NOT YET TESTED

2

Connection authentication run time configuration

NOT YET TESTED

3

VES mapping index run time configuration

NOT YET TESTED

4

ONT Registration notification Receiving/Processing

NOT YET TESTED

5

RCC MS on boarding at design time

NOT YET TESTED

6

Instantiation of RCC MS with CL from CLAMP

NOT YET TESTED

7

Configure RCC parameters at run time through CLAMP GUI

NOT YET TESTED

VES Mapper

Versions Compared

Old Version 23

New Version Current

Key

Introduction and Approach

Supported Notifications

Common Functionality

DCAE

Restconf Collector

Example Domain Controller Notifications

ONT Registration Notification

Introduction and Approach

Supported Notifications

Common Functionality

DCAE

Restconf Collector

Example Domain Controller Notifications

ONT Registration Notification

RG Activation Notification

RG Activation Notification

VES Mapper

VES Mapper

Restconf2VES Mapping

Restconf2VES Mapping

Test Cases

Page Comparison

Versions Compared

Old Version 23

New Version Current

Key

Introduction and Approach

Supported Notifications

Common Functionality

DCAE

Restconf Collector

Example Domain Controller Notifications

ONT Registration Notification

Introduction and Approach

Supported Notifications

Common Functionality

DCAE

Restconf Collector

Example Domain Controller Notifications

ONT Registration Notification

RG Activation Notification

RG Activation Notification

VES Mapper

VES Mapper

Restconf2VES Mapping

Restconf2VES Mapping

Test Cases