Page Comparison

Attribute Name

Type

Mult.

Stereotypes

Description

additionalFields

HashMap

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Additional stateChange fields if needed

newState

invalid

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

New state of the entity: 'inService', 'maintenance', 'outOfService'

OldState

invalid

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Previous state of the entity: 'inService', 'maintenance', 'outOfService'

stateChangeFieldsVersion

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Version of the stateChangeFields block as "#.#" where # is a digit; see section 1 for the correct digits to use.

stateInterface

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Card or port name of the entity that changed state

domain

Domain

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Event domain enumeration: 'fault', 'heartbeat', 'measurement', 'mobileFlow', 'notification', 'other', 'pnfRegistration', 'sipSignaling', 'stateChange', 'stndDefined', 'syslog', 'thresholdCrossingAlert', 'voiceQuality'

eventType

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

For example: 'applicationNf', 'guestOS', 'hostOS', 'platform'

lastEpochMicrosec

Number

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

the latest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds

nfcNamingCode

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Network function component type: 3 characters (aligned with vfc naming standards)

nfNamingCode

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Network function type: 4 characters (aligned with vnf and pnf naming standards)

nfVendorName

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Network function vendor name

priority

Priority

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Processing priority enumeration: 'High', 'Medium', 'Normal', 'Low'

reportingEntityId

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

UUID identifying the entity reporting the event or detecting a problem in another vnf/vm or pnf which is experiencing the problem. (Note: the AT&T internal enrichment process shall ensure that this field is populated). The reportingEntityId is an id for the reportingEntityName. See 'reportingEntityName' for more information.

reportingEntityId - UUID identifying the entity reporting the event or detecting a problem in another xnf/vm or pnf which is experiencing the problem.   Note: the AT&T internal enrichment process shall ensure that this field is populated. The reportingEntityId is an id for the reportingEntityName. See reportingEntityName for more information.

reportingEntityName

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Name of the entity reporting the event or detecting a problem in another vnf/vm or pnf which is experiencing the problem. May be the same as the sourceName. For synthetic events generated by DCAE, it is the name of the app generating the event.

reportingEntityName - Name of the entity reporting the event or detecting a problem in another xnf/vm or pnf which is experiencing the problem. May be the same as the sourceName. For synthetic events generated by DCAE, it is the name of the app generating the event.

sequence

Integer

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Ordering of events communicated by an event source instance (or 0 if not needed)

sequence - Ordering of events communicated by an event source instance (or 0 if not needed)

sourceId

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

sourceId - UUID identifying the entity experiencing the event issue, which may be detected and reported by a separate reporting entity   Note: the AT&T internal enrichment process shall ensure that this field is populate). The sourceId is an id for the sourceName. See sourceName for more information.

UUID identifying the entity experiencing the event issue, which may be detected and reported by a separate reporting entity (note: the AT&T internal enrichment process shall ensure that this field is populated). The sourceId is an id for the sourceName. See 'sourceName' for more information.

sourceName

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

sourceName - Name of the entity experiencing the event issue, which may be detected and reported by a separate reporting entity. The sourceName identifies the device for which data is collected. A valid sourceName must be inventoried in A&AI. If sourceName is a xNFC or VM, then the event must be reporting data for that particular xNFC or VM. If the sourceName is a xNF, comprised of multiple xNFCs, the data must be reported/aggregated at the xNF leveI. Data for individual xNFC must not be included in the xNF sourceName event.

Name of the entity experiencing the event issue, which may be detected and reported by a separate reporting entity. The sourceName identifies the device for which data is collected. A valid sourceName must be inventoried in A&AI. If sourceName is a xNFC or VM, then the event must be reporting data for that particular xNFC or VM. If the sourceName is a xNF, comprised of multiple xNFCs, the data must be reported/aggregated at the xNF leveI. Data for individual xNFC must not be included in the xNF sourceName event.

startingEpochMicrosec

Number

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

startEpochMicrosec - the earliest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds. For measurements and heartbeats, where events are collected over predefined intervals, startEpochMicrosec shall be rounded to the nearest interval boundary (e.g., the epoch equivalent of 3:00PM, 3:10PM, 3:20PM, etc…).   For fault events, startEpochMicrosec is the timestamp of the initial alarm; if the same alarm is raised again for changed, acknowledged or cleared cases, startEpochMicrosec must be the same as the initial alarm (along with the same eventId and an incremental sequence number). For devices with no timing source (clock), the default value will be 0 and DCAE collector will replace it with Collector time stamp (when event is received).

the earliest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds. For measurements and heartbeats, where events are collected over predefined intervals, startEpochMicrosec shall be rounded to the nearest interval boundary (e.g., the epoch equivalent of 3:00PM, 3:10PM, 3:20PM, etc…). For fault events, startEpochMicrosec is the timestamp of the initial alarm; if the same alarm is raised again for changed, acknowledged or cleared cases, startEpoch Microsec must be the same as the initial alarm (along with the same eventId and an incremental sequence number). For devices with no timing source (clock), the default value will be 0 and the VES collector will replace it with Collector time stamp (when the event is received)

timeZoneOffset

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Offset to GMT to indicate local time zone for device formatted as 'UTC+/-hh:mm'; see https://en.wikipedia.org/wiki/List_of_time_zone_abbreviations for UTC offset examples

version

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Version of the event header as "#.#" where # is a digit; see section 1 for the correct digits to use.

vesEventListenerVersion

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Version of the ves event listener api spec that this event is compliant with (as "#" or "#.#" or "#.#.#" where # is a digit; see section 1 for the correct digits to use).

name

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Status

String

0..1

Experimental

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

The current condition of an interaction, such as open, in research, closed, and so forth

description

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Defines a textual free-form description of the object.

id

Identifier

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Unambiguously distinguishes different object instances. It is the naming attribute of the object.

Identifier of this information element.   This attribute shall be globally unique.

Attribute Name

Type

Mult.

Stereotypes

Description

additionalFields

VesEvent:: domain

Domain

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Event domain enumeration: 'fault', 'heartbeat', 'measurement', 'mobileFlow', 'notification', 'other', 'pnfRegistration', 'sipSignaling', 'stateChange', 'stndDefined', 'syslog', 'thresholdCrossingAlert', 'voiceQuality'

VesEvent:: eventType

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

For example: 'applicationNf', 'guestOS', 'hostOS', 'platform'

VesEvent:: lastEpochMicrosec

Number

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

the latest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds

VesEvent:: nfcNamingCode

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Network function component type: 3 characters (aligned with vfc naming standards)

VesEvent:: nfNamingCode

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Network function type: 4 characters (aligned with vnf and pnf naming standards)

VesEvent:: nfVendorName

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Network function vendor name

VesEvent:: priority

Priority

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Processing priority enumeration: 'High', 'Medium', 'Normal', 'Low'

VesEvent:: reportingEntityId

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

UUID identifying the entity reporting the event or detecting a problem in another vnf/vm or pnf which is experiencing the problem. (Note: the AT&T internal enrichment process shall ensure that this field is populated). The reportingEntityId is an id for the reportingEntityName. See 'reportingEntityName' for more information.

reportingEntityId - UUID identifying the entity reporting the event or detecting a problem in another xnf/vm or pnf which is experiencing the problem.   Note: the AT&T internal enrichment process shall ensure that this field is populated. The reportingEntityId is an id for the reportingEntityName. See reportingEntityName for more information.

VesEvent:: reportingEntityName

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Name of the entity reporting the event or detecting a problem in another vnf/vm or pnf which is experiencing the problem. May be the same as the sourceName. For synthetic events generated by DCAE, it is the name of the app generating the event.

reportingEntityName - Name of the entity reporting the event or detecting a problem in another xnf/vm or pnf which is experiencing the problem. May be the same as the sourceName. For synthetic events generated by DCAE, it is the name of the app generating the event.

VesEvent:: sequence

Integer

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Ordering of events communicated by an event source instance (or 0 if not needed)

sequence - Ordering of events communicated by an event source instance (or 0 if not needed)

VesEvent:: sourceId

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

sourceId - UUID identifying the entity experiencing the event issue, which may be detected and reported by a separate reporting entity   Note: the AT&T internal enrichment process shall ensure that this field is populate). The sourceId is an id for the sourceName. See sourceName for more information.

UUID identifying the entity experiencing the event issue, which may be detected and reported by a separate reporting entity (note: the AT&T internal enrichment process shall ensure that this field is populated). The sourceId is an id for the sourceName. See 'sourceName' for more information.

VesEvent:: sourceName

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

sourceName - Name of the entity experiencing the event issue, which may be detected and reported by a separate reporting entity. The sourceName identifies the device for which data is collected. A valid sourceName must be inventoried in A&AI. If sourceName is a xNFC or VM, then the event must be reporting data for that particular xNFC or VM. If the sourceName is a xNF, comprised of multiple xNFCs, the data must be reported/aggregated at the xNF leveI. Data for individual xNFC must not be included in the xNF sourceName event.

Name of the entity experiencing the event issue, which may be detected and reported by a separate reporting entity. The sourceName identifies the device for which data is collected. A valid sourceName must be inventoried in A&AI. If sourceName is a xNFC or VM, then the event must be reporting data for that particular xNFC or VM. If the sourceName is a xNF, comprised of multiple xNFCs, the data must be reported/aggregated at the xNF leveI. Data for individual xNFC must not be included in the xNF sourceName event.

VesEvent:: startingEpochMicrosec

Number

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

startEpochMicrosec - the earliest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds. For measurements and heartbeats, where events are collected over predefined intervals, startEpochMicrosec shall be rounded to the nearest interval boundary (e.g., the epoch equivalent of 3:00PM, 3:10PM, 3:20PM, etc…).   For fault events, startEpochMicrosec is the timestamp of the initial alarm; if the same alarm is raised again for changed, acknowledged or cleared cases, startEpochMicrosec must be the same as the initial alarm (along with the same eventId and an incremental sequence number). For devices with no timing source (clock), the default value will be 0 and DCAE collector will replace it with Collector time stamp (when event is received).

the earliest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds. For measurements and heartbeats, where events are collected over predefined intervals, startEpochMicrosec shall be rounded to the nearest interval boundary (e.g., the epoch equivalent of 3:00PM, 3:10PM, 3:20PM, etc…). For fault events, startEpochMicrosec is the timestamp of the initial alarm; if the same alarm is raised again for changed, acknowledged or cleared cases, startEpoch Microsec must be the same as the initial alarm (along with the same eventId and an incremental sequence number). For devices with no timing source (clock), the default value will be 0 and the VES collector will replace it with Collector time stamp (when the event is received)

VesEvent:: timeZoneOffset

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Offset to GMT to indicate local time zone for device formatted as 'UTC+/-hh:mm'; see https://en.wikipedia.org/wiki/List_of_time_zone_abbreviations for UTC offset examples

VesEvent:: version

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Version of the event header as "#.#" where # is a digit; see section 1 for the correct digits to use.

VesEvent:: vesEventListenerVersion

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Version of the ves event listener api spec that this event is compliant with (as "#" or "#.#" or "#.#.#" where # is a digit; see section 1 for the correct digits to use).

VesEvent:: name

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

VesEvent:: Status

String

0..1

Experimental

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

The current condition of an interaction, such as open, in research, closed, and so forth

VesEvent:: description

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Defines a textual free-form description of the object.

VesEvent:: id

Identifier

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Unambiguously distinguishes different object instances. It is the naming attribute of the object.

Identifier of this information element.   This attribute shall be globally unique.

Attribute Name

Type

Mult.

Stereotypes

Description

additionalFields

HashMap

0..*

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Additional syslog fields if needed Ex:   {"name1": "value1", "name2: "value2" … }

eventSourceHost

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Hostname of the device

eventSourceType

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Examples: 'other', 'router', 'switch', 'host', 'card', 'port', 'slotThreshold', 'portThreshold', 'virtualMachine', 'virtualNetworkFunction'

syslogSdId

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

0-32 char in format name@number, i.e., ourSDID@32473

syslogFacilty

SyslogFacility

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Numeric code from 0 to 23 for facility:             0             kernel messages         1             user-level messages         2             mail system         3              system daemons         4             security/authorization messages         5             messages generated internally by syslogd         6             line printer subsystem         7             network news subsystem         8            UUCP subsystem         9             clock daemon         10             security/authorization messages         11             FTP daemon         12             NTP subsystem         13             log audit         14             log alert         15             clock daemon (note 2)         16             local use 0 (local0)         17             local use 1 (local1)         18             local use 2 (local2)         19             local use 3 (local3)         20             local use 4 (local4)         21             local use 5 (local5)         22             local use 6 (local6)         23             local use 7 (local7 )

syslogFieldVersion

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Version of the syslogFields block as "#.#" where # is a digit; see section 1 for the correct digits to use.

syslogMsg

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Syslog message

syslogMsgHost

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Hostname parsed from non-VES syslog message

syslogPri

Integer

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

0-192 Combined Severity and Facility (see rfc5424)

syslogProc

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Identifies the application that originated the message

syslogProcId

Number

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

The process number assigned by the OS when the application was started

syslogSData

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

A <space> separated list of key="value" pairs following the rfc5424 standard for SD-ELEMENT.   Deprecated The entire rfc5424 syslogSData object, including square brackets [ ], SD-ID and list of SD-PARAMs

syslogSev

SyslogSev

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Level-of-severity text enumeration defined below:   Text Sev Description Emergency 0 system is unusable Alert 1 action must be taken immediately Critical 2 critical conditions Error 3 error conditions Warning 4 warning conditions Notice 5 normal but significant condition Info 6 Informational messages Debug           7     debug-level messages

syslogTag

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Also known as MsgId. Brief non-spaced text indicating the type of message such as 'TCPOUT' or 'BGP_STATUS_CHANGE'; 'NILVALUE' should be used when no other value can be provided

syslogTs

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Timestamp parsed from non-VES syslog message

syslogVer

Number

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

IANA assigned version of the syslog protocol specification:   0: VES     1: IANA RFC5424

domain

Domain

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Event domain enumeration: 'fault', 'heartbeat', 'measurement', 'mobileFlow', 'notification', 'other', 'pnfRegistration', 'sipSignaling', 'stateChange', 'stndDefined, 'syslog', 'thresholdCrossingAlert', 'voiceQuality'

eventType

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

For example: 'applicationNf', 'guestOS', 'hostOS', 'platform'

lastEpochMicrosec

Number

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

the latest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds

nfcNamingCode

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Network function component type: 3 characters (aligned with vfc naming standards)

nfNamingCode

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Network function type: 4 characters (aligned with vnf and pnf naming standards)

nfVendorName

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Network function vendor name

priority

Priority

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Processing priority enumeration: 'High', 'Medium', 'Normal', 'Low'

reportingEntityId

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

UUID identifying the entity reporting the event or detecting a problem in another vnf/vm or pnf which is experiencing the problem. (Note: the AT&T internal enrichment process shall ensure that this field is populated). The reportingEntityId is an id for the reportingEntityName. See 'reportingEntityName' for more information.

reportingEntityId - UUID identifying the entity reporting the event or detecting a problem in another xnf/vm or pnf which is experiencing the problem.   Note: the AT&T internal enrichment process shall ensure that this field is populated. The reportingEntityId is an id for the reportingEntityName. See reportingEntityName for more information.

reportingEntityName

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Name of the entity reporting the event or detecting a problem in another vnf/vm or pnf which is experiencing the problem. May be the same as the sourceName. For synthetic events generated by DCAE, it is the name of the app generating the event.

reportingEntityName - Name of the entity reporting the event or detecting a problem in another xnf/vm or pnf which is experiencing the problem. May be the same as the sourceName. For synthetic events generated by DCAE, it is the name of the app generating the event.

sequence

Integer

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Ordering of events communicated by an event source instance (or 0 if not needed)

sequence - Ordering of events communicated by an event source instance (or 0 if not needed)

sourceId

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

sourceId - UUID identifying the entity experiencing the event issue, which may be detected and reported by a separate reporting entity   Note: the AT&T internal enrichment process shall ensure that this field is populate). The sourceId is an id for the sourceName. See sourceName for more information.

UUID identifying the entity experiencing the event issue, which may be detected and reported by a separate reporting entity (note: the AT&T internal enrichment process shall ensure that this field is populated). The sourceId is an id for the sourceName. See 'sourceName' for more information.

sourceName

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

sourceName - Name of the entity experiencing the event issue, which may be detected and reported by a separate reporting entity. The sourceName identifies the device for which data is collected. A valid sourceName must be inventoried in A&AI. If sourceName is a xNFC or VM, then the event must be reporting data for that particular xNFC or VM. If the sourceName is a xNF, comprised of multiple xNFCs, the data must be reported/aggregated at the xNF leveI. Data for individual xNFC must not be included in the xNF sourceName event.

Name of the entity experiencing the event issue, which may be detected and reported by a separate reporting entity. The sourceName identifies the device for which data is collected. A valid sourceName must be inventoried in A&AI. If sourceName is a xNFC or VM, then the event must be reporting data for that particular xNFC or VM. If the sourceName is a xNF, comprised of multiple xNFCs, the data must be reported/aggregated at the xNF leveI. Data for individual xNFC must not be included in the xNF sourceName event.

startingEpochMicrosec

Number

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

startEpochMicrosec - the earliest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds. For measurements and heartbeats, where events are collected over predefined intervals, startEpochMicrosec shall be rounded to the nearest interval boundary (e.g., the epoch equivalent of 3:00PM, 3:10PM, 3:20PM, etc…).   For fault events, startEpochMicrosec is the timestamp of the initial alarm; if the same alarm is raised again for changed, acknowledged or cleared cases, startEpochMicrosec must be the same as the initial alarm (along with the same eventId and an incremental sequence number). For devices with no timing source (clock), the default value will be 0 and DCAE collector will replace it with Collector time stamp (when event is received).

the earliest unix time aka epoch time associated with the event from any component--as microseconds elapsed since 1 Jan 1970 not including leap seconds. For measurements and heartbeats, where events are collected over predefined intervals, startEpochMicrosec shall be rounded to the nearest interval boundary (e.g., the epoch equivalent of 3:00PM, 3:10PM, 3:20PM, etc…). For fault events, startEpochMicrosec is the timestamp of the initial alarm; if the same alarm is raised again for changed, acknowledged or cleared cases, startEpoch Microsec must be the same as the initial alarm (along with the same eventId and an incremental sequence number). For devices with no timing source (clock), the default value will be 0 and the VES collector will replace it with Collector time stamp (when the event is received)

timeZoneOffset

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Offset to GMT to indicate local time zone for device formatted as 'UTC+/-hh:mm'; see https://en.wikipedia.org/wiki/List_of_time_zone_abbreviations for UTC offset examples

version

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Version of the event header as "#.#" where # is a digit; see section 1 for the correct digits to use.

vesEventListenerVersion

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Version of the ves event listener api spec that this event is compliant with (as "#" or "#.#" or "#.#.#" where # is a digit; see section 1 for the correct digits to use).

name

String

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Status

String

0..1

Experimental

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

The current condition of an interaction, such as open, in research, closed, and so forth

description

String

0..1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Defines a textual free-form description of the object.

id

Identifier

1

Preliminary

OpenModelAttribute

·   isInvariant: false

·   valueRange:  no range constraint

·   support: MANDATORY

Unambiguously distinguishes different object instances. It is the naming attribute of the object.

Identifier of this information element.   This attribute shall be globally unique.