Page Comparison

Warning

title	Migrated to ReadTheDocs

Further updates must be done in the corresponding RST file(s) by following the build process for documentation.

https://docs.onap.org/projects/onap-ccsdk-cds/en/latest/usecases/pnf-simulator.html

2020-10-19, Jakob Krieg

The objective of this page is to give you some basics about setting up ONAP PNF simulator and how to create a simple CDS blueprint model to perform DAY-N config-assign and config-deploy.

Setting up PNF simulator integration project

You can refer to PnP PNF Simulator -> NF Simulator wiki page to clone the GIT repo and start the required docker containers. We are interested in the sysrepo/sysrepo-netopeer2 docker container to load a simple YANG similar to vFW Packet Generator.

You can also consider using the Netopeer docker container alone to bring up NETCONF server. You can download the docker compose file test-netopeer.tar.gz

Start PNF simulator docker containers. You can consider changing the netopeer image verion to image: sysrepo/sysrepo-netopeer2:iop in docker-compose.yml file If you find any issues with the default image.

...

./simulator.sh stop

Verify the that you have netopeer docker container are up and running. It will be mapped to host port 830

...

Connect to netopeer docker container and execute the following commands to initialise the pg.yang model. You can leave this terminal up and running.

In the below steps we just initialise the Yang model with one pg-stream record. We will be using CDS to perform the day-1 configuration and day-2 configuration changes.

cd /opt/dev/Netopeer2/cli/build
./netopeer2-cli
> connect --host localhost --login netconf
> edit-config --target running --config=/dev-models/pg-data.xml
> get --filter-xpath /sample-plugin:*

> quitedit-config --target running --config=/dev-models/sample-plugin-data.xml
OK
> get --filter-xpath /sample-plugin:*
DATA
<sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
<pg-streams>
<pg-stream>
<id>1</id>
<is-enabled>true</is-enabled>
</pg-stream>
</pg-streams>
</sample-plugin>

>

You can use the attached either plain CBA file (pnf-demo-unenriched.zip) or the enriched (PNF-DEMO-ENRICHED-CBAWORKING.zip) file to enrich, save, publish and deploy from CDS UI. Otherwise you can clone the CDS source code using utility scripts under Scripts folder

git clone "https://gerrit.onap.org/r/ccsdk/cds"

Setup CDS k8s environment by following Running CDS on Microk8s wiki page

...

After Verify if you can see CDS k8s PODs

kubectl get pods -n onap

NAME READY STATUS RESTARTS AGE
dev-cds-blueprints-processor-b8656f584-dhj58 1/1 Running 0 4m2s
dev-cds-command-executor-78b98dff4f-qzf4j 1/1 Running 0 4m2s
dev-cds-db-0 1/1 Running 0 4m2s
dev-cds-py-executor-5667f84d8-n6j5h 1/1 Running 0 4m2s
dev-cds-sdc-listener-749896d795-4r9vp 0/1 Init:0/1 0 4m2s
dev-cds-ui-77f74ff6db-8m6t2 1/1 Running 0 4m2s
dev-mariadb-galera-0 1/1 Running 0 4m2s

Config-Deploy

config-deploy request will send the Day-0 or Day-1 resolution key as part of the REST call.

"resolution-key" : "day-1" (OR) "resolution-key" : "day-2"

config-deploy should retrieve the Day-1 or Day-2 configuration based on the resolution-key and executes the NETCONF command processor Kotlin code

TODO: REST API CURL Command for Day-1 configuration deployment

...

CDS Boot strap

The below script will load the CDS default model artifacts into CDS DB. You should get HTTP status 200 for the below command.

cd PNF_DEMO/Scripts/

bash -x ./bootstrap-cds.sh

Get the default model "artifactName": "vFW-CDS" loaded by bootstrap

bash -x ./get-cds-blueprint-models.sh

Load PNF CDS blueprint model data dictionary

cd PNF_DEMO/Scripts

bash -x ./dd-microk8s.sh ./dd.json

Check CDS database for PNF data dictionaries

You should see 6 rows as shown below

./connect-cds-mariadb.sh

select name, data_type from RESOURCE_DICTIONARY where updated_by='Aarna service <vmuthukrishnan@aarnanetworks.com>';

quit

exit

Create PNF CDS Blueprint archive pnf-demo.zip

cd PNF_DEMO/

rm pnf-demo.zip

zip -r pnf-demo.zip *

# You should see the below ZIP file
ls -l pnf-demo.zip

Enrich PNF Bluerprint archive

cd PNF_DEMO/Scripts

bash -x ./enrich-and-download-cds-blueprint.sh ../pnf-demo.zip

Verify Enriched Blue pring archive /tmp/CBA/ENRICHED-CBA.zip

cd /tmp/CBA/

unzip ENRICHED-CBA.zip

tree

Deploy/Save the Blueprint into CDS database

cd PNF_DEMO/Scripts
bash -x ./save-enriched-blueprint.sh ../pnf-demo.zip

# You should see the new model "artifactName": "pnf_netconf"
bash -x ./get-cds-blueprint-models.sh

Config-Assign

# The assumption is that we are using the same host to run PNF NETCONF simulator as well as CDS
# bash -x ./create-config-assing-data.sh day-1 LOCAL_HOST_IP_ADDRESS 5

Create PNF configuration for resolution-key = day-1 (stream-count = 5)

You can verify the CURL command JSON pay load file /tmp/day-n-pnf-config.json

cd PNF_DEMO/Scripts

bash -x ./create-config-assing-data.sh day-1 10.128.0.86 5

Verify the day-1 NETCONF RPC payload in CDS DB you should see the NETCONF RPC with 5 streams (fw_udp_1 TO fw_udp_5)

./connect-cds-mariadb.sh

MariaDB [sdnctl]> select * from TEMPLATE_RESOLUTION where resolution_key='day-1' AND artifact_name='netconfrpc';

<edit-config>
<target>
<running/>
</target>
<config>
<sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
<pg-streams>
<pg-stream>
<id>fw_udp_1</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_2</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_3</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_4</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_5</id>
<is-enabled>true</is-enabled>
</pg-stream>
</pg-streams>
</sample-plugin>
</config>
</edit-config>
</rpc>

Create PNF configuration for resolution-key = day-2 (stream-count = 10)

You can verify the CURL command JSON pay load file /tmp/day-n-pnf-config.json

cd PNF_DEMO/Scripts

bash -x ./create-config-assing-data.sh day-2 10.128.0.86 10

Verify the day-2 NETCONF RPC payload in CDS DB you should see the NETCONF RPC with 5 streams (fw_udp_1 TO fw_udp_10)

MariaDB [sdnctl]> select * from TEMPLATE_RESOLUTION where resolution_key='day-2' AND artifact_name='netconfrpc';

Note:- Till this point CDS did not interact with the PNF simulator or device. We just created the day-1 and day-2 configurations and

stored in CDS database

Config-Deploy

This is to make CDS REST API calls to push the day-1 and day-2 configuration changes PNF simulator

config-deploy resoultion-key = day-1

Open a new terminal and tail CDS Blueprint processor logs and keep it running. We will need it to review the config-deploy actions

cd PNF_DEMO/Scripts

bash -x ./tail-cds-bp-log.sh

Push the NETCONF changes for day-1

# Command syntax
# bash -x ./process-config-deploy.sh RESOLUTION_KEY PNF_IP_ADDRESS
# resolution-key = day-1 you can look at the JSON payload /tmp/pnf-config-deploy.json

cd PNF_DEMO/Scripts

bash -x ./process-config-deploy.sh day-1 10.128.0.86

Verify the CDS blueprint processor logs and you should see NETCONF RPC OK response as shown below

2020-09-08 13:16:25,783\|\|\|Thread-57\|\|\|\|INFO\|\|\|\|\|\|\| 10.128.0.86:830: Received message with messageId: 2 <rpc-reply message-id="2" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><ok/></rpc-reply>

Go back to PNF netopeer cli console and verify if you can see 5 streams fw_udp_1 to fw_udp_5 enabled

>
> get --filter-xpath /sample-plugin:*
DATA
<sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
<pg-streams>
<pg-stream>
<id>1</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_1</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_2</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_3</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_4</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_5</id>
<is-enabled>true</is-enabled>
</pg-stream>
</pg-streams>
</sample-plugin>

>

config-deploy resoultion-key = day-2

Push the NETCONF changes for day-2

# Command syntax
# bash -x ./process-config-deploy.sh RESOLUTION_KEY PNF_IP_ADDRESS
# resolution-key = day-1 you can look at the JSON payload /tmp/pnf-config-deploy.json

cd PNF_DEMO/Scripts

bash -x ./process-config-deploy.sh day-1 10.128.0.86

Verify the CDS blueprint processor logs and you should see NETCONF RPC OK response as shown below

2020-09-08 13:19:59,078\|\|\|Thread-60\|\|\|\|INFO\|\|\|\|\|\|\| 10.128.0.86:830: Received message with messageId: 2 <rpc-reply message-id="2" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><ok/></rpc-reply>

Go back to PNF netopeer cli console and verify if you can see 5 streams fw_udp_1 to fw_udp_10 enabled

> get --filter-xpath /sample-plugin:*
DATA
<sample-plugin xmlns="urn:opendaylight:params:xml:ns:yang:sample-plugin">
<pg-streams>
<pg-stream>
<id>1</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_1</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_2</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_3</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_4</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_5</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_6</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_7</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_8</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_9</id>
<is-enabled>true</is-enabled>
</pg-stream>
<pg-stream>
<id>fw_udp_10</id>
<is-enabled>true</is-enabled>
</pg-stream>
</pg-streams>
</sample-plugin>

Versions Compared

Old Version 17

New Version Current

Key