This page shows the differences between the current clean version model with ETSI IFA011 v2.5.1 and other proposed changes:
- Meaning of color coding: BOLD RED implies it is a change to make to the Vnfd model for R4. BOLD BLUE indicates an enhancement ONAP has made and would like to propose back to the ETSI community. BOLD PURPLE represents candidates for deprecation in support of HPA.
- The original tables came from R2 CLEAN and not from Papyrus.
- Verified against IFA011 v2.5.1 and IFA015 v2.5.1
- Added "Attribute Type" column to indicate whether the class attribute is an "attribute" or member end of an "association". Without this information it is difficult to create a class diagram. We might want to consider also for those "Attribute Types" that are associations to put whether there is shared or composite aggregation, or no aggregation at all. Note: This will not be necessary when model is put into Papyrus, as all associations will start with "_"
- Changed attribute Applied Stereotypes to represent the actual stereotypes being applied, and not just a property of a stereotype. Note: When the model is in Papyrus, GenDoc will output this field correctly.
- Added class definitions and applied stereotypes. Note: GenDoc will do this correctly when the model is in Papyrus.
- Proposal to define actual enums and not use the general term "Enum". Make sure the model captures these correctly in Papyrus.
- Proposal to remove incorrect usage of valueRange in OpenModelAttribute stereotype. Make sure this is not incorrectly propagated to Papyrus.
...
A VNFD is a deployment template which describes a VNF in terms of deployment and operational behaviour requirements. It also contains connectivity, interface and virtualised resource requirements.
Take out the following as it is not relevant to the info model: References: tosca-nfv-YAML-v1.0-wd05-rev02 (tosca.nodes.nfv.vnfd, but node details are not defined) ETSI GS NFV-IFA 011 V2.1.3 (VNFD)
Applied Stereotypes:
- OpenModelClass
support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
| vnfdId | Identifier | 1 | Identifier of this VNFD information element. This attribute shall be globally unique. NOTE: The VNFD Identifier shall be used as the unique identifier of the VNF Package that contains this VNFD. Any modification of the content of the VNFD or the VNF Package shall result in a new VNFD Identifier. | OpenModelAttribute
| attribute |
| vnfProvider | String | 1 | Provider of the VNF and of the VNFD. | OpenModelAttribute
| attribute |
| vnfProductName | String | 1 | Name to identify the VNF Product. Invariant for the VNF Product lifetime. | OpenModelAttribute
| attribute |
| vnfSoftwareVersion | Version | 1 | Software version of the VNF. This is changed when there is any change to the software that is included in the VNF Package. | OpenModelAttribute
| attribute |
| vnfdVersion | Version | 1 | Identifies the version of the VNFD. | OpenModelAttribute
| attribute |
| vnfProductInfoName | String | 0..1 | Human readable name for the VNF Product. Can change during the VNF Product lifetime. | OpenModelAttribute
| attribute |
| vnfProductInfoDescription | String | 0..1 | Human readable description of the VNF Product. Can change during the VNF Product lifetime. | OpenModelAttribute
| attribute |
| vnfmInfo | String | 0..* | Identifies VNFM(s) compatible with the VNF described in this version of the VNFD. | OpenModelAttribute
| attribute |
| localizationLanguage | String | 0..* | Information about localization languages of the VNF (includes e.g. strings in the VNFD). NOTE: This allows to provide one or more localization languages to support selecting a specific localization language at VNF instantiation time. | OpenModelAttribute
Remove this from the valueRange and put in the description. | attribute |
| defaultLocalizationLanguage | String | 0..1 | Default localization language that is instantiated if no information about selected localization language is available. | OpenModelAttribute
| attribute |
| vdu | Vdu | 1..* | Virtualisation Deployment Unit. | OpenModelAttribute
| association |
| virtualComputeDesc | VirtualComputeDesc | 1..* | Defines descriptors of virtual compute resources to be used by the VNF. | OpenModelAttribute
| association |
| virtualStorageDesc | VirtualStorageDesc | 0..* | Defines descriptors of virtual storage resources to be used by the VNF. | OpenModelAttribute
| association |
IN IFA 011 but not in clean swImageDesc | SwImageDesc | 0..* | Defines descriptors of software images to be used by the VNF. | OpenModelAttribute
| association |
| intVirtualLinkDesc | VnfVirtualLinkDesc | 0..* | Represents the type of network connectivity mandated by the VNF provider between two or more CPs which includes at least one internal CP. | OpenModelAttribute
| association |
IN |
IFA 011 but not in clean securityGroupRule Note: As this is not in the SOL001 v2.5.1 data model, propose that this NOT be added unless requested. | SecurityGroupRule (not sure if this is datatype or class, as it is not in the model.) | 0..* | Defines security group rules to be used by the VNF. (See definition of SecurityGroupRule in IFA011 v2.5.1) | OpenModelAttribute
| attribute |
| vnfReservedCpd | VduCpd | 0..* | Reserved IP Address for VNF which is not bounded to any specific VNFC, but assigned manually from outside and potentially shared as a floating IP among VNFCs. | OpenModelAttribute
| association |
| vnfExtCpd | VnfExtCpd | 1..* | Describes external interface(s) exposed by this VNF enabling connection with a VL. | OpenModelAttribute
| association |
| deploymentFlavour | VnfDf | 1..* | Describes specific DF(s) of a VNF with specific requirements for capacity and performance. | OpenModelAttribute
| association |
| configurableProperties | VnfConfigurableProperties | 0..1 | Describes the configurable properties of the VNF (e.g. related to auto scaling and auto healing). | OpenModelAttribute
| attribute |
| modifiableAttributes | VnfInfoModifiableAttributes | 1 (IFA has 0..1) | Describes the modifiable attributes of the VNF. | OpenModelAttribute
| attribute |
| lifeCycleManagementScript | VnfLifeCycleManagementScript | 0..* | Includes a list of events and corresponding management scripts performed for the VNF. | OpenModelAttribute
| attribute |
NOTE: This is "obsolete" in IFA011 v2.5.1, so mark it as "obsolete" Remove it, from diagram too. elementGroup | VnfdElementGroup | 0..* | Describes the associated elements of a VNFD for a certain purpose during VNF lifecycle management. | OpenModelAttribute
| association |
| vnfIndicator | VnfIndicator | 0..* | Declares the VNF indicators that are supported by this VNF. | OpenModelAttribute
| assocation |
| logo | String | 0..1 | File path of the vendor specified logo. | OpenModelAttribute
| attribute |
| guide | String | 0..1 | UUID of the vendor guide/documentation which is attached to VNF and can be downloaded from the model. | OpenModelAttribute
| attribute |
IN IFA 011 but not in clean autoScale Note: Not in data model IFA001 V2.5.1 so recommend not to add this | Rule | 0..* | Rule that determines when a scaling action needs to be triggered on a VNF instance e.g. based on certain VNF indicator values or VNF indicator value changes or a combination of VNF indicator value(s) and monitoring parameter(s). | OpenModelAttribute
| attribute |
Class: Vdu
The Virtualisation Deployment Unit (VDU) is a construct supporting the description of the deployment and operational behaviour of a VNFC.
A VNFC instance created based on the VDU maps to a single virtualisation container (e.g.; a VM). Remove the following as not relevant to the info model: References: tosca-nfv-YAML-v1.0-wd05-rev02 ETSI GS NFV-IFA 011 V2.1.3
Applied Stereotypes:
- OpenModelClass
support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
| vduId | Identifier | 1 | Unique identifier of this Vdu in VNFD. | OpenModelAttribute
| attribute |
| name | String | 1 | Human readable name of the Vdu. | OpenModelAttribute
| attribute |
| description | String | 1 | Human readable description of the Vdu. | OpenModelAttribute
| attribute |
| intCpd | VduCpd | 1..* | Describes network connectivity between a VNFC instance (based on this Vdu) and a Virtual Link (VL). | OpenModelAttribute
| association |
| virtualComputeDesc | Identifier (reference to VirtualComputeDesc) Info model has type: VirtualComputeDesc which makes more sense because this is an association member end. | 1 | Describes CPU, Memory and acceleration requirements of the Virtualisation Container realising this Vdu. | OpenModelAttribute
PassedByReference | association |
| virtualStorageDesc | Identifier (reference to VirtualStorageDesc) Info model has type: VirtualStorageDesc which makes more sense because this is an association member end. | 0..* | Describes storage requirements for a VirtualStorage instance attached to the virtualisation container created from virtualComputeDesc defined for this Vdu. | OpenModelAttribute
PassedByReference | association |
| bootOrder | KeyValuePair | 0..* | Boot order of valid boot devices. (lowest index defines highest boot priority). NOTE: If no boot order is defined the default boot order defined in the VIM or NFVI shall be used. | OpenModelAttribute
Remove this from valueRange and put in description. | attribute |
| swImageDesc | SwImageDesc (in model) This is member end of an association. | 0..1 | Describes the software image which is directly loaded on the virtualisation container realising this Vdu. NOTE: More software images can be attached to the virtualisation container using VirtualStorage resources. | OpenModelAttribute
PassedByReference | association |
| nfviConstraint |
| KeyValuePair | 0..* | Describes constraints on the NFVI for the VNFC instance(s) created from this Vdu. For example, aspects of a secure hosting environment for the VNFC instance that involve additional entities or processes. NOTE: These are constraints other than stipulating that a VNFC instance has access to a certain resource, as a prerequisite to instantiation. The attributes virtualComputeDesc and virtualStorageDesc define the resources required for instantiation of the VNFC instance. | OpenModelAttribute
Remove from valueRange and put in description. | attribute | |
| monitoringParameter | MonitoringParameter | 0..* | Defines the virtualised resources monitoring parameters on VDU level. | OpenModelAttribute
| attribute |
| configurableProperties | VnfcConfigurableProperties | 1 | Describes the configurable properties of all VNFC instances based on this VDU. | OpenModelAttribute
| attribute |
New in IFA011 v2.5.1 bootData | String | 0..1 | Contains a string or a URL to a file contained in the VNF package used to customize a virtualised compute resource at boot time. The bootData may contain variable parts that are replaced by deployment specific values before being sent to the VIM. | OpenModelAttribute
| attribute |
| injectFiles | String | 0..* | Describes the information (e.g. URL) about the scripts, config drive metadata, etc. which can be used during Vdu booting process. | OpenModelAttribute
| attribute |
Class: SwImageDesc
This information element describes the software image for a particular VDU or a virtual storage resource. Remove: References: tosca-nfv-YAML-v1.0-wd05-rev02 ETSI GS NFV-IFA 011 V2.1.3
Applied Stereotypes:
- OpenModelClass
support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
| id | Identifier | 1 | The identifier of this software image. | OpenModelAttribute
| attribute |
| name | String | 1 | The name of this software image. | OpenModelAttribute
| attribute |
| version | String Should this be Version? | 1 | The version of this software image. | OpenModelAttribute
| attribute |
| checksum | String | 1 | The checksum of the software image file. | OpenModelAttribute
| attribute |
| containerFormat | String | 1 | The container format describes the container file format in which software image is provided. | OpenModelAttribute
| attribute |
| diskFormat | String | 1 | The disk format of a software image is the format of the underlying disk image. | OpenModelAttribute
| attribute |
| minDisk | Number | 1 | The minimal disk size requirement for this software image. The value of the "size of storage" attribute of the VirtualStorageDesc referencing this SwImageDesc shall not be smaller than the value of minDisk. | OpenModelAttribute
| attribute |
| minRam | Number | 0..1 | The minimal RAM requirement for this software image. The value of the "size" attribute of VirtualMemoryData of the Vdu referencing this SwImageDesc shall not be smaller than the value of minRam. | OpenModelAttribute
| attribute |
| size | Number | 1 | The size of this software image. | OpenModelAttribute
| attribute |
swImage | Identifier (Reference to a SwImage) Model has type SwImage which makes more sense because this is a member end of an association | 1 | This is a reference to the actual software image. The reference can be relative to the root of the VNF Package or can be a URL. | OpenModelAttribute
PassedByReference | association |
| operatingSystem | String | 0..1 | Identifies the operating system used in the software image. This attribute may also identify if a 32 bit or 64 bit software image is used. Remove "support:" | OpenModelAttribute
| attribute |
| supportedVirtualisationEnvironment | String | 0..* | Identifies the virtualisation environments (e.g. hypervisor) compatible with this software image. | OpenModelAttribute
| attribute |
Class: VirtualComputeDesc
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
| virtualComputeDescId | Identifier | 1 | Unique identifier of this VirtualComputeDesc in the VNFD. | OpenModelAttribute
| attribute |
| logicalNode | LogicalNodeRequirements | 0..* | The logical Node requirements. | OpenModelAttribute
| attributeassociation |
| requestAdditionalCapabilities | RequestedAdditionalCapabilityData | 0..* | Specifies requirements for additional capabilities. These may be for a range of purposes. One example is acceleration related capabilities. | OpenModelAttribute
Why is this marked "obsolete" | attribute |
| computeRequirements | KeyValuePair | 0..* | Specifies compute requirements. | OpenModelAttribute
| attribute |
| virtualMemory | VirtualMemoryData | 1 | The virtual memory of the virtualised compute. | OpenModelAttribute
| attribute |
| virtualCpu | VirtualCpuData | 1 | The virtual CPU(s) of the virtualised compute. | OpenModelAttribute
| attribute |
New in IFA011 virtualDisk | BlockStorageData (need to create this new datatype) | 0..* | The local or ephemeral disk(s) of the virtualised virtualized compute. | Experimental OpenModelAttribute
| attribute |
Datatype: VirtualCpuData
The VirtualCpuData information element supports the specification of requirements related to virtual CPU(s) of a virtual compute resource.
Applied Stereotypes:
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
| cpuArchitecture | String | 0..1 | CPU architecture type. Examples are x86, ARM. The cardinality can be 0 during the allocation request, if no particular CPU architecture type is requested. | OpenModelAttribute
|
| numVirtualCpu | Integer | 1 | Number of virtual CPUs. | OpenModelAttribute
|
| virtualCpuClock | Number | 0..1 | Minimum virtual CPU clock rate (e.g. in MHz). The cardinality can be 0 during the allocation request, if no particular value is requested. | OpenModelAttribute
|
| virtualCpuOversubscriptionPolicy |
| 0..1 | The CPU core oversubscription policy e.g. the relation of virtual CPU cores to physical CPU cores/threads. The cardinality can be 0 during the allocation request, if no particular value is requested. | OpenModelAttribute
| |
| vduCpuRequirements |
| KeyValuePair | 0..* | Array of key-value pair requirements on the Compute (CPU) for the VDU. | OpenModelAttribute
| |
| virtualCpuPinning | VirtualCpuPinningData | 0..1 | The virtual CPU pinning configuration for the virtualised compute resource. | OpenModelAttribute
|
Datatype: VirtualMemoryData
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | |
|---|---|---|---|---|---|
| virtualMemSize | Number | 1 | Amount of virtual Memory (e.g. in MB). | OpenModelAttribute
| |
| virtualMemOversubscriptionPolicy | Not specified | 0..1 | The memory core oversubscription policy in terms of virtual memory to physical memory on the platform. The cardinality can be 0 during the allocation request, if no particular value is requested. | OpenModelAttribute
| |
| vduMemRequirements | Not specified KeyValuePair | 0..* | Array of key-value pair requirements on the memory for the VDU. | OpenModelAttribute
| |
| numaEnabled | Boolean | 0..1 | It specifies the memory allocation to be cognizant of the relevant process/core allocation. The cardinality can be 0 during the allocation request, if no particular value is requested. | OpenModelAttribute
|
Class: VirtualStorageDesc
The VirtualStorageDesc information element supports the specifications of requirements related to persistent virtual storage resources. Ephemeral virtual storage is specified in VirtualComputeDesc information element.
Applied Stereotypes:
- OpenModelClass
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
id | Identifier | 1 | Unique identifier of this VirtualStorageDesc in the VNFD. | OpenModelAttribute
| attribute |
typeOfStorage | StorageType (enum with values: BLOCK, OBJECT, FILE) | 1 | Type of virtualised storage resource | Experimental OpenModelAttribute
| attribute |
sizeOfStorage DELETED in IFA011 v2.5.1. Should we keep this and mark as "Obsolete"? | Number | 1 | Size of virtualised storage resource | OpenModelAttribute
| attribute |
vduStorageRequirements This is moved to BlockStorageData | Not specifiedKeyValuePair | 0..* | An array of key-value pairs that articulate the storage deployment requirements. | OpenModelAttribute
| attribute |
rdmaEnabled This is moved to BlockStorageData | Boolean | 0..1 | Indicate if the storage support RDMA. | OpenModelAttribute
| attribute |
swImageDesc This is moved to BlockStorageData | Identifier (Reference to SwImageDesc) In info model type is SwImageDesc which makes sense as this is an association member end | 0..1 | Software image to be loaded on the VirtualStorage resource created based on this VirtualStorageDesc. | OpenModelAttribute
PassedByReference | association |
New in IFA011 blockStorageData | BlockStorageData (new datatype to be created) | 0..1 | Specifies the details of block storage. It shall be present when the "typeOfStorage" attribute is set to "BLOCK". It shall be absent otherwise. | Experimental OpenModelAttribute
| attribute |
New in IFA011 objectStorageData | ObjectStorageData (new datatype to be created) | 0..1 | Specifies the details of object storage. It shall be present when the "typeOfStorage" attribute is set to "OBJECT". It shall be absent otherwise. | Experimental OpenModelAttribute
| attribute |
New in IFA011 fileStorageData | FileStorageData (new datatype to be created) | Specifies the details of file storage. It shall be present when the "typeOfStorage" attribute is set to "FILE". It shall be absent otherwise. | Experimental OpenModelAttribute
| attribute |
Class: LogicalNodeData NOTE: In IFA011 v2.5.1 this is changed to class LogicalNodeRequirements
This information element describes compute, memory and I/O requirements that are to be associated with the logical node of infrastructure. The logical node requirements are a sub-component of the VDU level requirements. As an example for illustration purposes, a logical node correlates to the concept of a NUMA cell in libvirt terminology.
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
New in IFA011 id | Identifier | 1 | Identifies this set of logical node requirements. | OpenModelAttribute
|
logicalNodeRequirementDetail | KeyValuePair | 1..* | The logical node-level compute, memory and I/O requirements. An array of key-value pairs that articulate the deployment requirements. This could include the number of CPU cores on this logical node, a memory configuration specific to a logical node (e.g. such as available in the Linux kernel via the libnuma library) or a requirement related to the association of an I/O device with the logical node. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
cpdId | Identifier | 1 | Identifier of this Cpd information element. | OpenModelAttribute
| attribute |
In IFA 011 and model but not in clean: layerProtocol | Enum Model has type LayerProtocol | 1..N | Identifies which protocol the CP uses for connectivity purposes (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire, etc.). | OpenModelAttribute
| attribute |
cpRole In model this is called cpdRole to distinguish it from a cpRole | String | 0..1 | Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS. For example a VNF with a tree flow pattern within the VNF will have legal cpRoles of ROOT and LEAF. | OpenModelAttribute
| attribute |
description | String | 0..1 | Provides human-readable information on the purpose of the CP (e.g. CP for control plane traffic). | OpenModelAttribute
| attribute |
cpProtocol | CpProtocolData | 1..N | Identifies the protocol layering information the CP uses for connectivity purposes and associated information. There shall be one cpProtocol for each layer protocol as indicated by the attribute layerProtocol. Editor's note: the attribute "layerProtocol" still needs further discussion. The info model has layerProtocol and has moved cpProtocol to sub-classes. Note: For now keep cpProtocol in Cpd. | OpenModelAttribute
| attribute |
trunkMode | Boolean | 1 | Information about whether the CP instantiated from this CPD is in Trunk mode (802.1Q or other). | OpenModelAttribute
| attribute |
New in IFA011 v2.5.1securityGroupRuleId1 securityGroupRuleId Note: not added in the model for R4 | Identifier (reference to SecurityGroupRule | 0..* | Reference of the security group rules bound to this CPD. | OpenModelAttribute
| attribute or association? |
allowedAddressData Note: propose to move this out of common definition of Cpd as it is specified specific to VNFD. | AddressData | 0..N | For specifying floating IP(s) to be shared among Cpds, which are reserved for vnfReservedCpd described in the VNFD. | OpenModelAttribute
| attribute |
Class: VduCpd
Describes network connectivity between a VNFC instance (based on this VDU) and an internal Virtual Link.
...
support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
bitrateRequirement | Number | 0..1 | Bitrate requirement on this CP. | OpenModelAttribute
| attribute |
vnicName | String | 0..1 | Describes the name of the vNIC this CP attaches to, e.g. eth0. It will be configured during the Vdu booting process. | OpenModelAttribute
| attribute |
vnicOrder (see newly added attribute below "order" to see if it could replace this) | Integer | 0..1 | Describes the order to create the vNIC within the scope of this Vdu. | OpenModelAttribute
| attribute |
vnicType Note: This is new in IFA011 v2.5.1 | Enum (create an enum called VnicType with the literals specified in valueRange ...in CAPS) | 0..1 | Describes the type of the virtual network interface |
realizing the CPs instantiated from this CPD. This is used to determine which mechanism driver(s) to be used to bind the port. | Experimental OpenModelAttribute
Note: This is an Enum and would not have a valueRange specified | attribute | |||
| virtualNetworkInterfaceRequirements | VirtualNetworkInterfaceRequirements | 0..* | Specifies requirements on a virtual network interface realizing the CPs instantiated from this CPD. | OpenModelAttribute
| association |
IFA 011 and model both contain intVirtualLinkDesc | VnfVirtualLinkDesc (model) Identifier (IFA 011) | 0..1 | Reference of the internal VLD which this internal CPD connects to. | OpenModelAttribute
| association |
IFA 011 and model both contain order Note: Did not add this due to presence of vnicOrder | Integer | 0..1 | The order of the NIC to be assigned on the compute instance (e.g. 2 for eth2). Note: when binding more than one port to a single compute (aka multi vNICs) and ordering is desired, it is mandatory that all ports will be set with an order value. The order values shall represent a positive, arithmetic progression that starts with 0 (i.e. 0, 1, 2,..., n). | OpenModelAttribute
| attribute |
| Note that model contains cpProtocol at this sub-class level rather than in cpd | |||||
| (inherited attributes) | All attributes inherited from Cpd. |
Class: VnfExtCpd
A VnfExtCpd is a type of Cpd and describes an external interface, a.k.a external CP, exposed by this VNF enabling connection with a VL.
...
support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
intCpd | Identifier (Reference to VduCpd) Model has type VduCpd which makes more sense as this is a member end of an association | 0..1 | Reference to the internal VDU CPD which is used to instantiate internal CPs. These internal CPs are, in turn, exposed as external CPs defined by this external CPD. | OpenModelAttribute
| association |
Both IFA 011 and model have intVirtualLinkDesc | Identifier (IFA 011) Model has type VnfVirtualLinkDesc | 0..1 | Reference to the internal Virtual Link Descriptor (VLD) to which CPs instantiated from this external CP Descriptor (CPD) connect. | OpenModelAttribute
| association |
| virtualNetworkInterfaceRequirements | VirtualNetworkInterfaceRequirements | 0..* | Specifies requirements on a virtual network interface realising the CPs instantiated from this CPD. NOTE: In case of referencing an intCpd via its identifier, the virtualNetworkInterfaceRequirements attribute of the referenced intCpd applies. | OpenModelAttribute
| association |
| Note: info model defines cpProtocol at this sub-class level and not in cpd. | |||||
| (inherited attributes) | All attributes inherited from Cpd. |
Class: VduProfile
The VduProfile describes additional instantiation data for a given VDU used in a DF.
...
support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
vduId | Identifier (Reference to Vdu) | 1 | Uniquely identifies a VDU. | OpenModelAttribute
| Attribute |
minNumberOfInstances | Integer | 1 | Minimum number of instances of the VNFC based on this VDU that is permitted to exist for this flavour. Shall be zero or greater. | OpenModelAttribute
Experimental | Attribute |
maxNumberOfInstances | Integer | 1 | Maximum number of instances of the VNFC based on this VDU that is permitted to exist for this flavour. Shall be greater than zero. | OpenModelAttribute
Experimental | Attribute |
localAffinityOrAntiAffinityRule | LocalAffinityOrAntiAffinityRule | 0..* | Specifies affinity or anti-affinity rules applicable between the virtualization containers (e.g. virtual machines) to be created based on this VDU. When the cardinality is greater than 1, both affinity rule(s) and anti-affinity rule(s) with different scopes (e.g. "Affinity with the scope resource zone and anti-affinity with the scope NFVI node") are applicable to the virtualization containers (e.g. virtual machines) to be created based on this VDU. | OpenModelAttribute
| Attribute |
| affinityOrAntiAffinityGroupId | Identifier | 0..* | Identifier(s) of the affinity or anti-affinity group(s) the VDU belongs to. NOTE: Each identifier references an affinity or anti-affinity group which expresses affinity or anti-affinity relationships between the virtualization container(s) (e.g. virtual machine(s)) to be created using this VDU and the virtualization container(s) (e.g. virtual machine(s)) to be created using other VDU(s) in the same group. | OpenModelAttribute
| Attribute |
| watchdog | String | 0..1 | Watchdog action to be triggered by the VIM for the VNF in case the heart beat fails, e.g. reset or hard shutdown, etc. | OpenModelAttribute
| Attribute |
| vmBootUpTimeOut | Integer | 0..1 | Timeout value for the VNFM to wait before the successful booting up of the VDU. | OpenModelAttribute
| Attribute |
Class: VirtualNetworkInterfaceRequirements
...
support: MANDATORY
Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
name | String | 0..1 | Provides a human readable name for the requirement. | OpenModelAttribute
| Attribute |
description | String | 0..1 | Provides a human readable description of the requirement. | OpenModelAttribute
| Attribute |
| supportMandatory | Boolean | 1 | Indicates whether fulfilling the constraint is mandatory (TRUE) for successful operation or desirable (FALSE). | OpenModelAttribute
| Attribute |
| networkInterfaceRequirements |
KeyValuePair | 0..* (For IFA011 0..N) | The network interface requirements. An element from an array of key-value pairs that articulate the network interface deployment requirements. | OpenModelAttribute
| Attribute | |
| nicIoRequirements | LogicalNodeRequirements | 0..1 | This references (couples) the CPD with any logical node I/O requirements (for network devices) that may have been created. Linking these attributes is necessary so that I/O requirements that need to be articulated at the logical node level can be associated with the network interface requirements associated with the CPD. | Experimental OpenModelAttribute
PassedByReference | Attribute |
Class: VnfVirtualLinkDesc
Represents the type of network connectivity mandated by the VNF vendor between two or more Connection Points which includes at least one Internal Connection Point.
Parent class: VirtualLinkDesc *** NOTE: Model has this class, but not IFA011. ONAP has not defined this class ***
Applied Stereotypes:
- OpenModelClass
support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
virtualLinkDescId | Identifier | 1 | Unique identifier of this internal VLD in VNFD.B Model definition: Uniquely identifies a VLD in the parent descriptor. (this is because you can have VnfVirtualLinkDesc and NsVirtualLinkDesc) | Note: Inherited from Class VirtualLinkDesc OpenModelAttribute
| Attribute |
| virtualLinkDescFlavour | VirtualLinkDescFlavour | 1..* | Describes a specific flavour of the VL with specific bitrate requirements. | OpenModelAttribute
| Association |
| connectivityType | ConnectivityType | 1 | Model defines this as: Specifies the protocol exposed by a VL and the flow pattern supported by the VL. | Note: Inherited from Class VirtualLinkDesc OpenModelAttribute
| Attribute |
| testAccess | String | 0..* | Specifies test access facilities expected on the VL (e.g. none, passive monitoring, or active (intrusive) loopbacks at endpoints). | Note: Inherited from Class VirtualLinkDesc OpenModelAttribute
| Attribute |
| description | String | 0..1 | Provides human-readable information on the purpose of the VL (e.g. control plane traffic). | Note: Inherited from Class VirtualLinkDesc OpenModelAttribute
| Attribute |
| monitoringParameter | MonitoringParameter | 0..* | Defines the virtualized resources monitoring parameters on VLD level. | OpenModelAttribute
| Attribute |
Class: VnfDf
A specific deployment version of a VNF with specific requirements for capacity and performance
Applied Stereotypes:
- OpenModelClass
support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
flavorId | Identifier | 1 | Identifier of this DF within the VNFD. | OpenModelAttribute
| Attribute |
| description | String | 1 | Human readable description of the DF. | OpenModelAttribute
| Attribute |
| vduProfile | VduProfile | 1..* | Describes additional instantiation data for the VDUs used in this flavor. | OpenModelAttribute
| Association |
| virtualLinkProfile | VirtualLinkProfile | 0..* | Defines the internal VLD along with additional data which is used in this DF. NOTE 1: This allows for different VNF internal topologies between DFs. NOTE 2: virtualLinkProfile needs to be provided for all VLs that the CPs of the VDUs in the VDU profiles connect to. | OpenModelAttribute
| Association |
| instantiationLevel | InstantiationLevel | 1..* | Describes the various levels of resources that can be used to instantiate the VNF using this flavour. Examples: Small, Medium, Large. If there is only one "instantiationLevel" entry, it shall be treated as the default instantiation level for this DF. | OpenModelAttribute
| Association |
| affinityOrAntiAffinityGroup | AffinityOrAntiAffinityGroup | 0..* | Specifies affinity or anti-affinity relationship applicable between the virtualisation containers (e.g. virtual machines) to be created using different VDUs or internal VLs to be created using different VnfVirtualLinkDesc(s) in the same affinity or anti-affinity group. NOTE: In the present specification, including either VDU(s) or VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is supported. Extension to support including both VDU(s) and VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is left for future specification. | OpenModelAttribute
| Association |
| scalingAspect | ScalingAspect | 0..* | The scaling aspects supported by this DF of the VNF. scalingAspect shall be present if the VNF supports scaling. | OpenModelAttribute
| Association |
| placementGroup | PlacementGroup | 0..* | Determine where VNFC's (VDU's) are placed with respect to the VNF | OpenModelAttribute
| Association |
| baseConfigGroup | BaseConfigGroup | 0..1 |
| OpenModelAttribute
Experimental | Association |
| deploymentGroup | DeploymentGroup | 1..* | DeploymentGroup provides the minimum viable VDU and associated VNFC configuration for a useable VNF. | OpenModelAttribute
Experimental | Association |
IFA011 also defines: defaultInstantiationLevelId supportedOperation vnfLcmOperationsConfiguration vnfIndicator initialDelta monitoringParameter Should these be added? Note: For now have only included defaultInstantiationLevelId , monitoringParameter and vnfIndicator (missing association) |
Class: VirtualLinkProfile
...
- support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | AttributeType |
|---|---|---|---|---|---|
virtualLinkProfileId Note: This is missing in IFA011 but is in the model. This is a necessary attribute in order to instantiate the class | Identifier | 1 | Uniquely identifies this VirtualLinkProfile class. | OpenModelAttribute
| Attribute |
vnfVirtualLinkDescId | Identifier (Reference to VnfVirtualLinkDesc) Model has type VnfVirtualLinkDesc because this is a member end of an association | 1 | Uniquely identifies a Vnf VLD. | OpenModelAttribute
PassedByReference | Association |
| flavourId | Identifier (Reference to VirtualLinkDescFlavour) |
| 1 | Identifies a flavour within the VnfVirtualLinkDesc. Model says it's a flavor within the VLD | OpenModelAttribute
PassedByReference | Association | ||
| localAffinityOrAntiAffinityRule | LocalAffinityOrAntiAffinityRule | 0..* | Specifies affinity or anti-affinity rules applicable between the VLs based on this VnfVirtualLinkDesc. When the cardinality is greater than 1, both affinity rule(s) and anti-affinity rule(s) with different scopes are applicable to the VLs based on this VnfVirtualLinkDesc. | OpenModelAttribute
| Attribute |
| affinityOrAntiAffinityGroupId | Identifier Model has AffinityOrAntiAffinityGroup as this is an association end. | 0..* | Identifier(s) of the affinity or anti-affinity group(s) the VnfVirtualLinkDesc belongs to. NOTE: Each identifier references an affinity or anti-affinity group which expresses affinity or anti-affinity relationship between the VL(s) using this VnfVirtualLinkDesc and the VL(s) using other VnfVirtualLinkDesc(s) in the same group. | OpenModelAttribute
PassedByReference | Association |
| maxBitRateRequirements | LinkBitrateRequirements | 1 | Specifies the maximum bitrate requirements for a VL instantiated according to this profile. NOTE: These attributes are used to control scaling boundaries. | OpenModelAttribute
| Attribute |
| minBitRateRequirements | LinkBitrateRequirements | 1 | Specifies the minimum bitrate requirements for a VL instantiated according to this profile. | OpenModelAttribute
| Attribute |
New in IFA011 v2.5.1 virtualLinkProtocolData | VirtualLinkProtocolData (see definition of this datatype in IFA011 v2.5.1) | 0..* | Specifies the protocol data for a VL instantiated according to this profile. Cardinality 0 is used when no protocol data needs to be specified. | OpenModelAttribute
| Attribute |
initiationParameters Note: This will be deleted as it is now part of the L3ProtocolData which is referenced as part of the VirtualLinkProtcolData | KeyValuePair | 0..* | Specifies initiation parameters for the virtual link. | OpenModelAttribute
valueRange: specified values include: cidr, allocationPools (represented by [starting ip address, ending ip address]), gatewayIp, networkName, segmentationId, physicalNetwork. Note: Incorrect usage of valueRange, remove this and put in the description |
Enum
Note: What which enum? Give it a name.
| Attribute | |||||
networkType Note: This will be deleted as it is now part of the L2ProtocolData which is referenced as part of the VirtualLinkProtcolData | Enum | 0..1 | Type of the network. | OpenModelAttribute
valueRange: "VLAN", "VXLAN" Note: incorrect usage of valueRange. It is not intended to define enums | Attribute |
dhcpEnabled Note: This will be deleted as it is now part of the L3ProtocolData which is referenced as part of the VirtualLinkProtcolData | Boolean | 0..1 | Indicating whether DHCP is enabled. Default is "FALSE" if not specified otherwise. | OpenModelAttribute
| Attribute |
vlanTransparent Note: This will be deleted as it is now part of the L2ProtocolData which is referenced as part of the VirtualLinkProtcolData | Boolean | 0..1 | Indicating whether "VLAN Transparent Mode" is supported. Default is "FALSE" if not specified otherwise. | OpenModelAttribute
| Attribute |
Class: VirtualLinkDescFlavour
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
flavourId | Identifier | 1 | Identifies a flavour within a VnfVirtualLinkDesc. | OpenModelAttribute
| Attribute |
| qos | QoS Model has VnfQoS We should consider putting QoS in Common and VnfQoS in Vnf and NsQos in Ns sub-models | 0..1 | QoS of the VL. | OpenModelAttribute
| Attribute |
Datatype: LinkBitrateRequirements - Missing in output of model
The LinkBitrateRequirements datatype describes the requirements in terms of bitrate for a Virtual Link.
Applied Stereotypes:
Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
root | Number | 1 | Throughput requirement of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN). | OpenModelAttribute
|
| leaf | Number | 0..1 | Throughput requirement of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E?LAN branches). NOTE: The present document does not specify the means to declare different bitrate requirements for leaf connections (e.g. E-LAN leaves). | OpenModelAttribute
|
Class: InstantiationLevel
...
- support: MANDATORY
Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
levelId | Identifier | 1 | Uniquely identifies a level with the DF. | OpenModelAttribute
| Attribute |
| description | String | 1 | Human readable description of the level. | OpenModelAttribute
| Attribute |
| vduLevel | VduLevel | 1..* | Indicates the number of instance of this VDU to deploy for this level. | OpenModelAttribute
| Association |
| virtualLinkBitRateLevel | VirtualLinkBitRateLevel | 0..* | Specifies bitrate requirements applicable to virtual links created from particular virtual link descriptors for this level. NOTE: If not present, it is assumed that the bitrate requirements can be derived from those specified in the VduCpd instances applicable to the internal VL. If present in both the InstantiationLevel and the VduCpd instances applicable to the internal VL, the highest value takes precedence. | OpenModelAttribute
| Attribute |
| scaleInfo | ScaleInfo | 0..* | Represents for each aspect the scale level that corresponds to this instantiation level. scaleInfo shall be present if the VNF supports scaling. | OpenModelAttribute
| Attribute |
Datatype: ScaleInfo
This datatype provides information about the scale level of a VNF instance w.r.t. one scaling aspect.
Applied Stereotypes:
Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
aspectId | Identifier (Reference to ScalingAspect) Model has ScalingAspect |
1 | Reference to the scaling aspect. | OpenModelAttribute
PassedByReference |
| scaleLevel | Integer | 1 | The scale level, greater than or equal to 0. | OpenModelAttribute
| Attribute |
Class: VduLevel
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
vduId | Identifier (Reference to Vdu) Model has type Vdu as this is an association end | 1 | Uniquely identifies a VDU. | OpenModelAttribute
PassedByReference | Association |
| numberOf Instances | Integer | 1 | Number of instances of VNFC based on this VDU to deploy for an instantiation level or for a scaling delta. | OpenModelAttribute
Experimental | Association |
Datatype: QoS
(Note: In model this is an abstract parent of NsQoS and VnfQoS. I recommend we create QoS in "common" with attributes as specified in the model, and then create VnfQoS and NsQos.)
It is the asbstract parent of the NsQos and VnfQos datatypes, as the NsQoS (QoS in ETSI GS NFV IFA 014) includes a priority attribute, while VnfQoS (QoS in ETSI GS NFV IFA 011) does not.
The QoS datatype specifies quality of service parameters applicable to a VL.
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
latency | Number | 1 | Maximum latency in ms. | OpenModelAttribute
|
| packetDelayVariation | Number | 1 | Maximum jitter in ms. | OpenModelAttribute
|
| packetLossRatio | Number | 0..1 | Maximum packet loss ratio. Cardinality is 0 if no packetLossRatio requirement exists. | OpenModelAttribute
|
Datatype: LocalAffinityOrAntiAffinityRule - Missing from clean output
The LocalAffinityOrAntiAffinityRule describes the affinity or anti-affinity rule applicable between the virtualization containers to be created based on a particular VDU, or between internal VLs to be created based on a particular VnfVirtualLinkDesc.
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | ||
|---|---|---|---|---|---|---|
type Model has affinityOrAntiAffinity | Enum Which one? | RuleType | 1 | Specifies whether the rule is an affinity rule or an anti-affinity rule. | support: MANDATORY valueRange: "Affinity", "Anti-Affinity" Remove from valueRange and put into enum as caps | |
| scope | Enum Which one?RuleScope | 1 | Specifies the scope of the rule. | support: MANDATORY valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node" Remove from valueRange and put into enum as caps |
Class: AffinityOrAntiAffinityGroup - missing in clean output
Note: This should probably go into common as it is applicable to NS and VNFs with the following definition:
The AffinityOrAntiAffinityGroup class describes the affinity or anti-affinity relationship.
For NSs, those rules are applicable between the VNF instances created using different VnfProfiles, the Virtual Link instances created using different VlProfiles or the nested NS instances created using different NsProfiles.
For VNFs, those rules are applicable between the virtualization containers to be created based on different VDUs, or between internal VLs to be created based on different VnfVirtualLinkDesc(s).
Per VNF, the affinity / anti-affinity rules defined using this class, using the LocalAffinityOrAntiAffinityRule datatypet, and using the placement constraints in the GrantLifecycleOperation as defined in ETSI GS NFV IFA 007 should be conflict-free. In case of conflicts, the placement constraints in the GrantLifecycleOperation shall take precedence
Applied Stereotypes:
- OpenModelClass
- support: MANDATORY
Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
groupId | Identifier | 1 | Identifies an affinity or anti-affinity group to which the affinity or anti-affinity rule applies. | OpenModelAttribute
| Attribute |
type Model has affinityOrAntiAffinity | Enum AffinityType with literals: "AFFINITY" "ANTI_AFFINITY) | 1 | Specifies whether the rule is an affinity rule or an anti-affinity rule. | OpenModelAttribute
valueRange: "Affinity", "Anti-Affinity" Note: Incorrect usage of value range. Remove it | Attribute |
| scope | AffinityOrAntiAffinityScope enum with literals: "NFVI_POP" "ZONE" "ZONE_GROUP" "NFVI_NODE" | 1 | Specifies the scope of the rule. | OpenModelAttribute
valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node Note: Incorrect usage of value range. Put in enum as CAPS. |
Datatype: AddressData - Missing in Clean Output
The AddressData datatype supports providing information about the addressing scheme and parameters applicable to a CP.
Applied Stereotypes:
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
addressType | Identifier Both IFA011 and model have this as an enum called "AddressType" with literals: "MAC" "IP" (note: model incorrectly calls this AdressType) | 1 | Describes the type of the address to be assigned to the CP instantiated from the parent CPD. Value:
|
etc.
The content type shall be aligned with the address type supported by the layerProtocol attribute of the parent CPD. | OpenModelAttribute
| |||
| l2AddressData | L2AddressData | 0..1 | Provides the information on the MAC addresses to be assigned to the CP(s) instantiated from the parent CPD. Shall be present when the addressType is MAC address. | OpenModelAttribute
Experimental |
| l3AddressData | L3AddressData | 0..1 | Provides the information on the IP addresses to be assigned to the CP instantiated from the parent CPD. Shall be present when the addressType is IP address. | OpenModelAttribute
|
Datatype:
...
L2AddressData - Missing in clean output
The L2AddressData datatype provides information about Layer 2 level addressing applicable to a CP.
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
macAddressAssignment | Boolean | 1 | Specify if the MAC address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility. If it is set to False, it will be provided by an external entity, e.g. OSS/BSS. | OpenModelAttribute
|
Datatype: L3AddressData - Missing in clean output
The L3AddressData datatype supports providing information about Layer 3 level addressing scheme and parameters applicable to a CP.
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
iPAddressAssignment | Boolean | 1 | Specify if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility. | OpenModelAttribute
|
| floatingIpActivated | Boolean | 1 | Specify if the floating IP scheme is activated on the CP or not. | OpenModelAttribute
|
| iPAddressType | Enum Which one?IpAddressType | 0..1 | Define address type. Values:
NOTE: The address type should be aligned with the address type supported by the layerProtocol attribute of the parent Cpd. | OpenModelAttribute
valueRange: "IPv4", "IPv6" Note: Incorrect usage of value range |
| numberOfIpAddress | Integer | 0..1 | Minimum number of IP addresses to be assigned based on this L3AddressData information element. | OpenModelAttribute
|
Datatype: CpProtocolData - Missing from clean output
A CpProtocolData information element describes and associates the protocol layer that a CP uses together with other protocol and connection point information.
Applied Stereotypes:
Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
associatedLayerProtocol | Enum Model has this as LayerProtocol enum | 1 | One of the values of the attribute layerProtocol of the Cpd IE. | OpenModelAttribute
|
| addressData | AddressData | 0.. |
* Model has 1 | Provides information on the addresses to be assigned to the CP(s) instantiated from the CPD. | OpenModelAttribute
|
Datatype: ConnectivityType - Missing from clean output
The ConnectivityType datatype specifies the protocol exposed by a VL and the flow pattern supported by the VL. The top layer protocol of the VL protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers.
Applied Stereotypes:
Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
layerProtocol | Enum Model has enum LayerProtocol, however it doesn't define the literals: "ETHERNET", "MPLS", "ODU2", "IPV4", "IPV6" and "PSEUDOWIRE" Note: Just because we may not support all these layer protocols does not mean they shouldn't be defined. | 1.. |
* | Identifies the |
protocols this VL gives access to (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire). | OpenModelAttribute
| |||
| flowPattern | String | 0..1 | Identifies the flow pattern of the connectivity (Line, Tree, Mesh). | OpenModelAttribute
|
Datatype: VirtualCpuPinningData - Obsolete
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
virtualCpuPinningPolicy | Enum Model has enum CpuPinningPolicy with values: STATIC, DYNAMIC | 0..1 | The policy can take values of "static" or "dynamic". In case of "static" the virtual CPU cores are requested to be allocated to logical CPU cores according to the rules defined in virtualCpuPinningRules. In case of "dynamic" the allocation of virtual CPU cores to logical CPU cores is decided by the VIM. (e.g.: SMT (Simultaneous Multi-Threading) requirements). | OpenModelAttribute
valueRange: "static", "dynamic" Incorrect use of valueRange |
| virtualCpuPinningRule | Not specified Editor's note: need to be specified | 0..1 | A list of rules that should be considered during the allocation of the virtual CPUs to logical CPUs in case of "static" virtualCpuPinningPolicy. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
requestedAdditionalCapabilityName | String | 1 | Identifies a requested additional capability for the VDU. | OpenModelAttribute
valueRange: For acceleration capabilities, reference to ETSI GS NFV-IFA 002. Incorrect use of valueRange. Put in description |
| supportMandatory | Boolean | 1 | Indicates whether the requested additional capability is mandatory for successful operation. | OpenModelAttribute
|
| minRequestedAdditionalCapabilityVersion | String | 0..1 | Identifies the minimum version of the requested additional capability. | OpenModelAttribute
|
| preferredRequestedAdditionalCapabilityVersion | String | 0..1 | Identifies the preferred version of the requested additional capability. | OpenModelAttribute
|
| targetPerformanceParameters | KeyValuePair | 1..N* | Identifies specific attributes, dependent on the requested additional capability type. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
isAutoscaleEnabled | Boolean | 0..1 | It permits to enable (TRUE)/disable (FALSE) the auto-scaling functionality. NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported. | OpenModelAttribute
|
| isAutohealEnabled | Boolean | 0..1 | It permits to enable (TRUE)/disable (FALSE) the auto-healing functionality. NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported. | OpenModelAttribute
|
| additionalConfigurablePropertyString | Not specified We need to specify and propose to ETSI. Propose to specify as string | 0..N* | It provides VNF specific configurable properties that can be modified using the ModifyVnfInfo operation. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
additionalVnfcConfigurableProperty | String | 0..N | It provides VNFC configurable properties that can be modified using the ModifyVnfInfo operation. NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported. | OpenModelAttribute
|
Datatype: VnfLifecycleManagementScript
Note: In the model this is called VnfLifecycleManagementScript to distinguish it from NsLifecycleManagementScriptthere are two data types called VnfLifecycleManagementScript and NsLifecycleManagementScript.
Defines the information elements related to the lifecycle management script for the VNF.
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | ||
|---|---|---|---|---|---|---|
event | Enum In the model this is LcmEventType | 0..N* | Describes VNF lifecycle event(s) or an external stimulus detected on a VNFM reference point. NOTE: At least one of these two attributes shall be included. | OpenModelAttribute
valueRange: for lifecycle events, include: "EVENT_START_INSTANTIATION", "EVENT_END_INSTANTIATION", "EVENT_START_SCALING", "EVENT_END_SCALING", "EVENT_START_SCALING_TO_LEVEL", "EVENT_END_SCALING_TO_LEVEL", "EVENT_START_HEALING", "EVENT_END_HEALING", "EVENT_START_TERMINATION", "EVENT_END_TERMINATION", "EVENT_START_VNF_FLAVOR_CHANGE", "EVENT_END_VNF_FLAVOR_CHANGE", "EVENT_START_VNF_OPERATION_CHANGE", "EVENT_END_VNF_OPERATION_CHANGE", "EVENT_START_VNF_EXT_CONN_CHANGE", "EVENT_END_VNF_EXT_CONN_CHANGE", "EVENT_START_VNFINFO_MODIFICATION", "EVENT_END_VNFINFO_MODIFICATION"; for external stimulus, include: receipt of request message of instantiation, scaling, healing, termination, change of VNF flavour, change of the operation state of the VNF, change of external VNF connectivity, modification of VNF information or the receipt of a notification regarding the change of a VNF indicator value. Incorrect usage of valueRange. Remove this. | ||
| lcmTransitionEvent | String | 0..N* | Describes the transition VNF lifecycle event(s) that cannot be mapped to any of the enumerated values defined for the event attribute. NOTE: At least one of these two attributes shall be included. | OpenModelAttribute
| script | String
|
| script | Not specified. We should define this and propose to ETSI. Propose to define as string | 1 | Information to locate a VNF LCM script (e.g. written in a DSL as specified in requirement VNF_PACK.LCM.001) triggered to react to one of the events listed in the event attribute. | OpenModelAttribute
| ||
| scriptDsl | String | 1 | Defines the domain specific language (i.e. the type) of script that is provided. Types of scripts could include bash, python, etc. | OpenModelAttribute
| ||
| scriptInput | KeyValuePair | 0..N* | Array of KVP requirements with the key as the parameter name and the value as the parameter that need to be passed as an input to the script. NOTE: The scriptInput values are passed to the scripts in addition to the parameters received in the operation invocation request or indicator value change. | OpenModelAttribute
|
Class: VnfIndicator
Editor's note: may related to DCAE/VES projects
The VnfIndicator class defines the indicator the VNF supports.
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
| id | Identifier | 1 | Unique identifier. | OpenModelAttribute
| Attribute |
| name | String | 0..1 | The human readable name of the VnfIndicator. | OpenModelAttribute
| Attribute |
| indicatorValue | String | 1..N | Defines the allowed values or value ranges of this indicator. | OpenModelAttribute
| Attribute |
| source | Enum Model has VnfIndicatorTypeVnfIndicatorSource with values: VNF, EM, BOTH | 1 | Describe the source of the indicator. This tells the consumer where to send the subscription request. | OpenModelAttribute
valueRange: "VNF", "EM", "Both" Incorrect usage of valueRange | Attribute |
Datatype: MonitoringParameter
Editor's note: may related to DCAE/VES projects
This information element specifies the virtualised Specifies the virtualized resource related performance metric to be tracked by the VNFM, e.g. for auto-scaling purposes. The VNFM collects the values of performance metrics identified by this information element from the VIM(s) using one or more locally initiated PM Jobs. These values can be used as inputs to auto-scaling rules
...
Applied Stereotypes:
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
| id | Identifier | 1 | Unique identifier of the monitoring parameter. | OpenModelAttribute
|
| name | String | 0..1 | Human readable name of the monitoring parameter. | OpenModelAttribute
|
| performanceMetric | String | 1 | Identifies the |
| virtualized resource performance metric. | OpenModelAttribute
| |||
| collectionPeriod | Not specified Editor's note: need to be specified and proposed to ETSI, Currently defined as enum CollectionPeriod but with no enumeration literals defined. | 0..1 | An attribute that describes the recommended periodicity at which to collect the performance information. VNFM determines if this parameter is considered. The vendor may provide this information as a guidance for creating PmJobs if needed. NOTE: The MANO or NFVI may not support the recommended collectionPeriod based on their functionalities, and can reject the requests based on the recommended collectionPeriod in this case. | OpenModelAttribute
|
Class: VnfdElementGroup NOTE: This is "obsolete" in V2.5.
...
1
A VNFD Element Group is a mechanism for associating elements of a VNFD (Vdus and VnfVirtualLinkDesc(s)) for a certain purpose, for example, scaling aspects.
...
support: MANDATORY
- Preliminary
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
| vnfdElementGroupId | Identifier | 1 | Unique identifier of this group in the VNFD. | OpenModelAttribute
| Attribute |
| description | String | 1 | Human readable description of the group. | OpenModelAttribute
| Attribute |
| vdu | Identifier (Reference to Vdu) Model has type Vdu as this is an association end | 0..N | References to Vdus that are part of this group. | OpenModelAttribute
| Association |
| virtualLinkDesc | Identifier (Reference to VnfVirtualLinkDesc) Model has type VnfVirtualLinkDesc as this is an association end | 0..N | References to VnfVirtualLinkDesc that are part of this group. | OpenModelAttribute
| Association |
Class: PlacementGroup (Experimental) As this inherits from VnfdElementGroup and that is obsolete, is this obsolete?
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
| elementGroupId | Identifier | 1 | Unique identifier of this group in the VNFD. | OpenModelAttribute
| Attribute |
| placementStrategy | Enum Define an actual enum type with values: COLOCATION, ISOLATION, and EXCLUSIVELY | 1 | Determine where VNFC's (VDU's) are placed with respect to the VNF. | OpenModelAttribute
valueRange: "co-location", "isolation", "exclusively" NOTE:
Incorrect use of valueRange | Attribute |
| vnfcMembers | Not specified (should it be Identifier (Reference to Vdu)?) Good question. If it is the end of an association is should be type Vdu? | 0..N | References to Vdus that are part of this group. | OpenModelAttribute
| Association? |
| strategyScope | Enum Define an actual enum with values: HOST, and RACK | 1 | indicate if the strategy is applied at the host or rack level | OpenModelAttribute
valueRange: "host", "rack" Incorrect usage of valueRange | Attribute |
Class: BaseConfigGroup (Experimental)
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
| extension | Not specified Editor's note: need to be specified and proposed to ETSI | 0..N* | "Extension" attributes of VnfInfo that are writeable. | OpenModelAttribute
|
| metadata | Not specified Editor's note: need to be specified and proposed to ETSI | 0..N* | "Metadata" attributes of VnfInfo that are writeable. | OpenModelAttribute
|
...