Table of Contents

Introduction

Sonar requires the coverage files to be provided during the project scanningscan. Those data files are generally recorded by plugins, servers, interpreters, ... when executing the tests and made accessible to the sonar scanner.

...

Sonar recognizes 2 types of testing that can be executed in a build for the coverage report, and it computes the union of the unit and integration test results.

Unit tests
It tests the classes or methods directly, generally by using specific test framework (Junit, testNG, etc ...)
The "container framework" used behind the scene (Spring/ JBoss/ EJB or whatever) SHOULD NOT be used in the Unit test scope.
External calls to test servers or third party components/anything MUST NOT be done here. These type of tests should be executable by anybody locally in an IDE.
Due to that, it's sometimes required to make use of mock frameworks to replace the code that can't be triggered because it does require unreachable components
The mocking SHOULD NEVER consume the developer's bandwidth, that means mocking the code should be straight-forward.
Don't waste your time into a complicated implementation, for that there is a second test phase called "integration tests"

Also DO NOT add "isTest" flag in your code to replace the mock, this is a common test anti pattern that lead the leads to useless tests.
Integration tests
It tests the code within the "container framework" and can make use of 3rd party components, like databases.
The 3rd party components could be emulated, or even better, could be physically mounted locally, with the help of a docker engine for instance.
The starting life-cycle of the those 3rd party components can be initiated/shut-downed by the build itself in a "Pre-integration/Post-integration" phase.

...

In this pom.xml, the sonar plugin must be defined, the command mvn sonar:sonar will then execute the scan

Code Block

language	xml

<plugin>
	<groupId>org.sonarsource.scanner.maven</groupId>
	<artifactId>sonar-maven-plugin</artifactId>
  	<version>x.x</version>
</plugin>

...

Code Block

language	xml

<properties>
....
    <sonar.core.codeCoveragePlugin>jacoco</sonar.core.codeCoveragePlugin>
    <!-- Default Sonar configuration -->
    <sonar.jacoco.reportPath>target/code-coverage/jacoco-ut.exec</sonar.jacoco.reportPath>
    <sonar.jacoco.itReportPath>target/code-coverage/jacoco-it.exec</sonar.jacoco.itReportPath>xmlReportPaths>${project.reporting.outputDirectory}/jacoco-ut/jacoco.xml</sonar.coverage.jacoco.xmlReportPaths>

....
</properties>

Note that if you import the org.onap.oparent.oparent those settings are already included, so there is no need to add them unless you want to override those settings

Java

For java there are different plugins/properties that must be included in the pom.xml to execute the tests and record the coverage during the execution

Maven Properties

Code Block

language	xml

<properties>
...
                <sonar.java.coveragePlugin>jacoco</sonar.java.coveragePlugin>
                <sonar.surefire.reportsPath>${project.build.directory}/surefire-reports</sonar.surefire.reportsPath>
                <sonar.coverage.jacoco.reportPath>$xmlReportPaths>${project.buildreporting.directoryoutputDirectory}/coveragejacoco-reportsut/jacoco.exec<xml</sonar.jacoco.reportPath>
                <sonar.jacoco.itReportPath>${project.build.directory}/coverage-reports/jacoco-it.exec</sonar.jacoco.itReportPath>
                <sonar.jacoco.reportMissing.force.zero>true</sonar.jacoco.reportMissing.force.zero>jacoco.xmlReportPaths>
                <sonar.projectVersion>${project.version}</sonar.projectVersion>
                <!-- Enable language to disable other language analysis -->
                <sonar.language>java</sonar.language>
                <sonar.exclusions>src/main/resources/**</sonar.exclusions>
...
</properties>

Surefire (Unit tests)

This one is used to execute the unit tests, various config are available depending of the project need (https://maven.apache.org/surefire/maven-surefire-plugin/index.html)

Code Block

language	xml

<plugin>
	<groupId>org.apache.maven.plugins</groupId>
	<artifactId>maven-surefire-plugin</artifactId>
	<version>X.XX.X</version>
	<configuration>
		<forkCount>1</forkCount>
		<reuseForks>true</reuseForks>
		<useSystemClassLoader>false</useSystemClassLoader>
	</configuration>
</plugin>

Failsafe (Integration tests)

This one is used to execute the integration tests, various config are available depending of the project need (https://maven.apache.org/surefire/maven-failsafe-plugin/index.html)

Code Block

language	xml

<plugin>
    <groupId>org.apache.maven.plugins</groupId>
    <artifactId>maven-failsafe-plugin</artifactId>
    <version>X.XX.X</version>
    <executions>
      <execution>
         <id>integration-tests</id>
         <goals>
           <goal>integration-test</goal>
           <goal>verify</goal>
         </goals>
         <configuration>
           <additionalClasspathElements>
              <additionalClasspathElement>${project.build.directory}/classes</additionalClasspathElement>
           </additionalClasspathElements>
           <includes>
             <include>**/*ItCase.java</include>
           </includes>
           <forkCount>1</forkCount>
           <reuseForks>false</reuseForks>
           <useSystemClassLoader>false</useSystemClassLoader>
         </configuration>
      </execution>
    </executions>
</plugin>

Maven properties

Javascript

Python

Section TBD

Jacoco

This one is used to record the coverage of the unit tests and integration tests, also a result merge for the developer IDE (https://www.eclemma.org/jacoco/trunk/doc/maven.html)

Code Block

language	xml

<plugin>
                                <groupId>org.jacoco</groupId>
                                <artifactId>jacoco-maven-plugin</artifactId>
                                <version>0.8.2</version>
                                <configuration>
                                        <dumpOnExit>true</dumpOnExit>
                                        <includes>
                                                <include>org.onap.*</include>
                                        </includes>
                                        <propertyName>surefireArgLine</propertyName>
                                </configuration>
                                <executions>
                                        <execution>
                                                <id>pre-unit-test</id>
                                                <goals>
                                                        <goal>prepare-agent</goal>
                                                </goals>
                                                <configuration>
                                                        <destFile>${project.build.directory}/coverage-reports/jacoco.exec</destFile>
                                                        <!-- <append>true</append> -->
                                                </configuration>
                                        </execution>
                                        <execution>
                                                <id>pre-integration-test</id>
                                                <phase>pre-integration-test</phase>
                                                <goals>
                                                        <goal>prepare-agent</goal>
                                                </goals>
                                                <configuration>
                                                        <destFile>${project.build.directory}/coverage-reports/jacoco-it.exec</destFile>
                                                        <!-- <append>true</append> -->
                                                </configuration>
                                        </execution>
                                        <execution>
                                                <goals>
                                                        <goal>merge</goal>
                                                </goals>
                                                <phase>post-integration-test</phase>
                                                <configuration>
                                                        <fileSets>
                                                                <fileSet implementation="org.apache.maven.shared.model.fileset.FileSet">
                                                                        <directory>${project.build.directory}/coverage-reports</directory>
                                                                        <includes>
                                                                                <include>*.exec</include>
                                                                        </includes>
                                                                </fileSet>
                                                        </fileSets>
                                                        <destFile>${project.build.directory}/jacoco-dev.exec</destFile>
                                                </configuration>
                                        </execution>
                                </executions>
</plugin>

Note that for the integration tests, it could more complex than the following Jacoco plugin usage.

If it's a remote server or anything else the jacoco agent must be provided to the running JVM to do the coverage recording (https://www.eclemma.org/jacoco/trunk/doc/agent.html), then brought back to build folder.

Docker Plugin (Integration tests)

This plugin can be used to start containers before doing the integration tests. The following example starts Mariadb and Python before the integration tests phase.

Code Block

language	xml

<plugin>
                                <groupId>io.fabric8</groupId>
                                <artifactId>docker-maven-plugin</artifactId>
                                <version>0.26.0</version>
                                <configuration>
                                        <verbose>true</verbose>
                                        <apiVersion>1.23</apiVersion>
                                        <images>
                                                <image>
                                                        <name>library/mariadb:10.1.11</name>
                                                        <alias>mariadb</alias>
                                                        <run>
                                                                <env>
                                                                        <MYSQL_ROOT_PASSWORD>secret</MYSQL_ROOT_PASSWORD>
                                                                </env>
                                                                <hostname>mariadb</hostname>
                                                                <volumes>
                                                                        <bind>
                                                                                <volume>${project.basedir}/extra/sql/:/docker-entrypoint-initdb.d</volume>
                                                                                <volume>${project.basedir}/extra/docker/mariadb/conf1:/etc/mysql/conf.d</volume>
                                                                        </bind>
                                                                </volumes>
                                                                <wait>
                                                                        <log>socket: '/var/run/mysqld/mysqld.sock'  port: 3306  mariadb.org binary distribution</log>
                                                                        <time>600000</time>
                                                                </wait>
                                                                <ports>
                                                                        <port>${docker.mariadb.port.host}:3306</port>
                                                                </ports>
                                                        </run>
                                                </image>
                                                <image>
                                                        <name>library/python:2-slim</name>
                                                        <alias>python</alias>
                                                        <run>
                                                                <hostname>python</hostname>
                                                                <volumes>
                                                                        <bind>
                                                                                <volume>${project.basedir}/src/test/resources/http-cache/:/usr/src/http-cache-app</volume>
                                                                                <volume>${project.basedir}/src/test/resources/http-cache/example/:/usr/src/http-cache-app/data-cache</volume>
                                                                        </bind>
                                                                </volumes>
                                                                <wait>
                                                                        <tcp>
                                                                                <ports>
                                                                                        <port>8080</port>
                                                                                </ports>
                                                                                <mode>direct</mode>
                                                                        </tcp>
                                                                        <time>120000</time>
                                                                </wait>
                                                                <ports>
                                                                        <port>${docker.http-cache.port.host}:8080</port>
                                                                </ports>
                                                                <workingDir>/usr/src/http-cache-app</workingDir>
                                                                <cmd>
                                                                        <shell>./start_http_cache.sh ${python.http.proxy.param} --python_proxyaddress=localhost:${docker.http-cache.port.host}</shell>
                                                                </cmd>
                                                        </run>
                                               </image>                                      
                                </configuration>
                                <executions>
                                        <execution>
                                                <id>docker-start-for-it</id>
                                                <phase>pre-integration-test</phase>
                                                <goals>
                                                        <goal>start</goal>
                                                </goals>
                                        </execution>
                                        <execution>
                                                <id>docker-stop-for-it</id>
                                                <phase>post-integration-test</phase>
                                                <goals>
                                                        <goal>stop</goal>
                                                </goals>
                                        </execution>
                                </executions>
</plugin>

Javascript
For the javascript testing, the goal is to use JEST framework to execute the unit testing and record the coverage (Mocking is also possible with JEST)
The setup is based on NPM, so it uses a maven plugin that handles that (similar idea to docker-maven-plugin in the Integration testing)
Beforehand the Javascript code must be copied to the target folder, plus the package.json file that will be used by NPM

NOTE : For SonarCloud Users or SonarQube 7.8+, there is a need to have the node.js executable available on the build node, the frontend-maven-plugin below does install it as part of the build

Code Block

language	xml

                <testResources>
                        <!-- Copy the NPM package.json for UI javascript testing framework -->
                        <testResource>
                                <directory>src/test/javascript</directory>
                                <includes>
                                        <include>**/**.json</include>
                                </includes>
                                <filtering>true</filtering>
                                <targetPath>${project.build.directory}/my-ui</targetPath>
                        </testResource>
                        <testResource>
                                <directory>src/main/resources/META-INF/resources/designer</directory>
                                <filtering>false</filtering>
                                <targetPath>${project.build.directory}/my-ui/designer</targetPath>
                        </testResource>
                </testResources>

Maven properties

By default do not specify any language to SONAR so that it can scan all languages used in the project

Code Block

language	xml

                <sonar.javascript.lcov.reportPaths>${project.build.directory}/my-ui/coverage/lcov.info</sonar.javascript.lcov.reportPaths>
                <sonar.projectVersion>${project.version}</sonar.projectVersion>
                <sonar.sources>src/main,${project.build.directory}/my-ui/designer</sonar.sources>
		<!-- DO NOT SPECIFY THAT so it scans javascript <sonar.language>java</sonar.language>-->
		 <sonar.exclusions>src/main/resources/**,**/my-ui/designer/lib/*</sonar.exclusions>
		<!-- NEW for SQ7.8 or SonarCloud - Need to have node.js executable available for analysis to run, see frontend-maven-plugin config below for install location -->
		<sonar.nodejs.executable>${project.build.directory}/my-ui/node/node</sonar.nodejs.executable>

frontend-maven-plugin

This one is used to setup the required libraries and environment to execute the test under JEST framework ((https://github.com/eirslett/frontend-maven-plugin)

Code Block

language	xml

        <plugin>
                        <groupId>com.github.eirslett</groupId>
                        <artifactId>frontend-maven-plugin</artifactId>
                        <version>1.6</version>
                        <configuration>
                            <installDirectory>${project.build.directory}/my-ui</installDirectory>
                            <workingDirectory>${project.build.directory}/my-ui</workingDirectory>
                            <skip>${maven.test.skip}</skip>
                        </configuration>

                        <executions>
                            <execution>
                                <id>install_node_and_npm</id>
                                <goals>
                                    <goal>install-node-and-npm</goal>
                                </goals>
                                <phase>test</phase>
                                <configuration>
                                    <nodeVersion>v8.11.1</nodeVersion>
                                    <npmVersion>5.6.0</npmVersion>
                                </configuration>
                            </execution>
                            <execution>
                                <id>npm_install</id>
                                <goals>
                                    <goal>npm</goal>
                                </goals>
                                <phase>test</phase>
                                <configuration>
                                    <arguments>install</arguments>
                                </configuration>
                            </execution>
                            <execution>
                                <id>npm_test</id>
                                <goals>
                                    <goal>npm</goal>
                                </goals>
                                <phase>test</phase>
                                <configuration>
                                    <arguments>run-script test:coverage</arguments>
                                </configuration>
                            </execution>

                        </executions>
    </plugin>

Package.json

This file must be stored in your project and will be used by the Npm maven plugin to setup the javascript environment.

Here is an example to setup an angular environment, others libraries can be setup depending of the need

Code Block

language	xml

{
    "scripts": {
        "test": "jest",
        "test:watch": "jest --watch",
        "test:coverage": "jest --coverage"
    },
    "jest": {
        "verbose": true,
        "coverageDirectory": "${project.build.directory}/my-ui/coverage",
        "collectCoverageFrom": [
            "**/designer/**/*.{js,jsx}",
            "!**/designer/lib/**"
        ],
        "rootDir": "${project.build.directory}/my-ui",
        "roots": [
            "${project.basedir}/src/test/javascript/",
            "<rootDir>/designer/"
        ],
        "moduleDirectories": [
            "${project.build.directory}/my-ui/node/node_modules",
            "${project.build.directory}/my-ui/node_modules",
            "<rootDir>/designer"
        ],
        "coverageReporters": [
            "lcov"
        ]
    },
    "devDependencies": {
        "angular": "1.3.2",
        "angular-resource": "1.3.2",
        "angular-cookies": "1.3.2",
        "angular-route": "1.3.2",
        "angular-mocks": "1.3.2",
        "angular-animate": "1.3.2",
        "angular-sanitize": "1.3.2",
        "angular-touch": "1.3.2",
        "angular-dialog-service": "5.3.0",
        "angular-loading-bar": "0.9.0",
        "jquery": "3.3.1",
        "popper.js": "1.14.4",
        "bootstrap": "4.1.1",
        "angular-ui-bootstrap": "2.5.6",
        "jest": "^23.6.0",
        "jest-cli": "^21.2.1"
    }
}

Javascript test Example

Here is a short example of an angular controller test

Code Block

language	js

require('jquery/dist/jquery.min.js');
require('angular/angular.min.js');
require('angular-mocks/angular-mocks.js');
require('angular-route/angular-route.min.js');
require('angular-resource/angular-resource.min.js');
require('angular-cookies/angular-cookies.min.js');
require('angular-animate/angular-animate.min.js');
require('angular-sanitize/angular-sanitize.min.js');
require('angular-touch/angular-touch.min.js');
require('popper.js/dist/umd/popper.min.js');
require('bootstrap/dist/js/bootstrap.min.js');
require('angular-ui-bootstrap/dist/ui-bootstrap-tpls.js');
require('angular-loading-bar/src/loading-bar.js');
require('angular-dialog-service/dist/dialogs.js');
require('scripts/app.js');
require('scripts/DashboardCtrl.js');


describe('Dashboard ctrl tests', function() {

    beforeEach(angular.mock.module('clds-app'));

    var $controllerService;

    beforeEach(angular.mock.inject(function(_$controller_) {
        $controllerService = _$controller_;
    }));

    describe('$scope.showPalette', function() {

        it('test showPalette', function() {

            var $scopeTest = {};
            var $rootScopeTest = {};
            var $resourceTest = {};
            var $httpTest = {};
            var $timeoutTest = {};
            var $locationTest = {};
            var $intervalTest = function(){};
            var $controllerDashboard = $controllerService('DashboardCtrl', {
                '$scope' : $scopeTest,
                '$rootScope' : $rootScopeTest,
                '$resource' : $resourceTest,
                '$http' : $httpTest,
                '$timeout' : $timeoutTest,
                '$location' : $locationTest,
                '$interval' : $intervalTest
            });
            $scopeTest.showPalette();
            expect($rootScopeTest.isModel).toEqual(true);
        });
    });
});

Concrete example

For more information, here are some examples of javascript coverage integration :

CLAMP:

https://gerrit.onap.org/r/#/c/70581/1

(add your project Review here)

Python

Your pom.xml file needs to specify several sonar properties. In particular, the <sonar.python.coverage.reportPaths> variable specifies the location of the coverage.xml file that is generated by tox. (Previous versions of sonar used the singular form of this variable; make certain that it has an "s" at the end of its name.)

Code Block

language	xml

  <properties>
    <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
    <sonar.sources>.</sonar.sources>
    <sonar.junit.reportsPath>xunit-results.xml</sonar.junit.reportsPath>
    <sonar.python.coverage.reportPaths>coverage.xml</sonar.python.coverage.reportPaths>
    <sonar.language>py</sonar.language>
    <sonar.pluginname>python</sonar.pluginname>
    <sonar.inclusions>**/**.py</sonar.inclusions>
    <sonar.exclusions>tests/*,setup.py</sonar.exclusions>
  </properties>

Your tox.ini file should list both py36 and py37. Because some of our build environments might be missing one of these python versions, you may also set the skip_missing_interpreters variable to true.

Code Block

language	text

[tox]
envlist = py36,py37
skip_missing_interpreters = true

For Gradle

Section TDB

Versions Compared

Old Version 11

New Version Current

Key

Introduction

Java

Maven Properties

Surefire (Unit tests)

Failsafe (Integration tests)

Maven properties

Javascript

Python

Jacoco

Docker Plugin (Integration tests)

Javascript

Maven properties

frontend-maven-plugin

Package.json

Javascript test Example

Concrete example

Python

For Gradle

Page Comparison

Versions Compared

Old Version 11

New Version Current

Key

Introduction

Java

Maven Properties

Surefire (Unit tests)

Failsafe (Integration tests)

Maven properties

Javascript

Python

Jacoco

Docker Plugin (Integration tests)

Javascript

Maven properties

frontend-maven-plugin

Package.json

Javascript test Example

Concrete example

Python

For Gradle