...

Version

...

Date

...

Modified by

...

Comment

...

0.1

...

13.10.2018

...

Michal Ptacek

...

First draft

Contributors

Name	Mail
Michal Ptá?ek	m.ptacek@partner.samsung.com
Samuli Slivius	s.silvius@partner.samsung.com
Timo Puha	t.puha@partner.samsung.com
Petr Ospaly	p.ospaly@partner.samsung.com
Pawel Mentel	p.mentel@samsung.com
Witold Kopeld	w.kopel@samsung.com

...

Rhel 7.4 server with ~200G disc space, 16G+ RAM
Internet connectivity

...

screen expect nodejs git wget createrepo python2-pip patch
docker (exact version, from centos repo)
source code of offline installer

...

Wiki Markup

All artifacts should be downloaded by running following script
\\
(CONSIDER RUNNING THIS COMMAND in screen - it will take long time to finish)
$ ./bash/tools/download_offline_data_by_lists.sh
!worddav8a2a0708ad42f63de823c674420d76d6.png|height=60,width=60!
Download is as reliable as network connectivity to internet, it's highly recommended to run it in screen and save log file from this script execution for checking if all artifacts were successfully collected. Each start and end of script call should contain timestamp in console output. Downloading consists of 12
          steps, which should be checked at the end one-by-one.
*Verify:*  +Please take a look on following comments to respective parts of download script+
\\
\[Step 1/12 Download collected docker images\]
\[Step 2/12 Download manually collected docker images\]
=> both image download steps are quite reliable and contain retry logic
\\
E.g
== pkg #143 of 163 ==
rancher/etc-host-updater:v0.0.3 digest:sha256:bc156a5ae480d6d6d536aa454a9cc2a88385988617a388808b271e06dc309ce8
Error response from daemon: Get https://registry-1.docker.io/v2/rancher/etc-host-updater/manifests/v0.0.3: Get https://auth.docker.io/token?scope=repository%3Arancher%2Fetc-host-updater%3Apull&service=registry.docker.io: net/http: TLS handshake timeout
WARNING \[!\]: warning Command docker -l error pull rancher/etc-host-updater:v0.0.3 failed. Attempt: 2/5
INFO: info waiting 10s for another try...
v0.0.3: Pulling from rancher/etc-host-updater
b3e1c725a85f: Already exists
6a710864a9fc: Already exists
d0ac3b234321: Already exists
87f567b5cf58: Already exists
16914729cfd3: Already exists
83c2da5790af: Pulling fs layer
83c2da5790af: Verifying Checksum
83c2da5790af: Download complete
83c2da5790af: Pull complete
\\
\[Step 3/12 Build own nginx image\]
=> there is no hardening in this step, if it failed needs to be retriggered. It should end with "Successfully built <id>"
\\
\[Step 4/12 Save docker images from docker cache to tarfiles\]
=> quite reliable, retry logic in place
\\
\[Step 5/12 move infra related images to infra folder\]
=> should be safe, precondition is not failing step(3)
\\
\[Step 6/12 Download git repos\]
=> potentially unsafe, no hardening in place. If it not download all git repos. It has to be executed again. Easiest way is probably to comment-out other steps in load script and run it again.
\\
E.g.
Cloning into bare repository 'github.com/rancher/community-catalog.git'...
error: RPC failed; result=28, HTTP code = 0
fatal: The remote end hung up unexpectedly
Cloning into bare repository 'git.rancher.io/rancher-catalog.git'...
Cloning into bare repository 'gerrit.onap.org/r/testsuite/properties.git'...
Cloning into bare repository 'gerrit.onap.org/r/portal.git'...
Cloning into bare repository 'gerrit.onap.org/r/aaf/authz.git'...
Cloning into bare repository 'gerrit.onap.org/r/demo.git'...
Cloning into bare repository 'gerrit.onap.org/r/dmaap/messagerouter/messageservice.git'...
Cloning into bare repository 'gerrit.onap.org/r/so/docker-config.git'...
\\
\[Step 7/12 Download http files\]
\[Step 8/12 Download npm pkgs\]
\[Step 9/12 Download bin tools\]
=> work quite reliably, If it not download all artifacts. Easiest way is probably to comment-out other steps in load script and run it again.
\\
\[Step 10/12 Download rhel pkgs\]
=> this is the step which will work on rhel only, for other platform different packages has to be downloaded. We need just couple of rpms, but those has a lot of dependencies (mostly because of vnc). Script is also download all perl packages from all repos, but we need around dozen of them.
\\
Following is considered as sucessfull run of this part:
\\
    Available: 1:net-snmp-devel-5.7.2-32.el7.i686 (rhel-7-server-rpms)
        net-snmp-devel = 1:5.7.2-32.el7
    Available: 1:net-snmp-devel-5.7.2-33.el7_5.2.i686 (rhel-7-server-rpms)
        net-snmp-devel = 1:5.7.2-33.el7_5.2
Dependency resolution failed, some packages will not be downloaded.
No Presto metadata available for rhel-7-server-rpms
https://ftp.icm.edu.pl/pub/Linux/fedora/linux/epel/7/x86_64/Packages/p/perl-CDB_File-0.98-9.el7.x86_64.rpm: \[Errno 12\] Timeout on https://ftp.icm.edu.pl/pub/Linux/fedora/linux/epel/7/x86_64/Packages/p/perl-CDB_File-0.98-9.el7.x86_64.rpm:
 (28, 'Operation timed out after 30001 milliseconds with 0 out of 0 bytes received')
Trying other mirror.
Spawning worker 0 with 230 pkgs
Spawning worker 1 with 230 pkgs
Spawning worker 2 with 230 pkgs
Spawning worker 3 with 230 pkgs
Spawning worker 4 with 229 pkgs
Spawning worker 5 with 229 pkgs
Spawning worker 6 with 229 pkgs
Spawning worker 7 with 229 pkgs
Workers Finished
Saving Primary metadata
Saving file lists metadata
Saving other metadata
Generating sqlite DBs
Sqlite DBs complete
\\
\\
\\
\[Step 11/12 Download oom\]
=> this step is downloading oom repo into ./resources/oom and patch it using our patch file. If this step is retried after previously passing it will lead to inconsistent oom repo. Because patch will fail and create some .rej files, which will be marked as broken during onap_deploy part later.
\\
\\
\\
E.g. successful run looks like this:
\\
Checkout base commit which will be patched
Switched to a new branch 'patched_beijing'
patching file kubernetes/appc/values.yaml
patching file kubernetes/common/dgbuilder/templates/deployment.yaml
patching file kubernetes/dcaegen2/charts/dcae-cloudify-manager/templates/deployment.yaml
patching file kubernetes/dmaap/charts/message-router/templates/deployment.yaml
patching file kubernetes/onap/values.yaml
patching file kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/apps-install.sh
patching file kubernetes/policy/charts/drools/resources/scripts/update-vfw-op-policy.sh
patching file kubernetes/policy/resources/config/pe/push-policies.sh
patching file kubernetes/robot/values.yaml
patching file kubernetes/sdnc/charts/sdnc-ansible-server/templates/deployment.yaml
patching file kubernetes/sdnc/charts/sdnc-portal/templates/deployment.yaml
patching file kubernetes/uui/charts/uui-server/templates/deployment.yaml
\\
\\
\[Step 12/12 Download sdnc-ansible-server packages\]
=> there is again no retry logic in this part, it's collecting packages for sdnc-ansible-server in the exactly same way how that container is doing it, however there is a bug in upstream that image in place won't work with those packages as old ones are not available and newer are not compatible with other stuff inside that image
\\
\\
+Following is approximate size of all artifacts after successful download+
\\
\[root@upstream-master onap-offline\]# for i in `ls -1 resources/`;do du -h resources/$i | tail -1;done
126M    resources/downloads
97M     resources/git-repo
61M     resources/http
91G     resources/offline_data
36M     resources/oom
638M    resources/pkg
\\

...

Cleaned repos (ensure that we use our packages from onap.repo only)
$ mkdir /etc/yum.repos.d-backup && mv /etc/yum.repos.d/*.repo /etc/yum.repos.d-backup/

actual directory with local_repo.conf
$ ./bash/tools/deploy_nexus.sh
Image Removed
User is prompted for local ip, where nexus should be deployed
For accessing nexus GUI, feel free to use preconfigured VNC server (adjust the firewall on the host server)
One just need to create ssh tunnel to vcnserver and connect it with vncviewer
vncserver listens on 5901 and password is onap
$ ssh -NfL 1234:127.0.0.1:5901 <the host server>
$ vncviewer 127.0.0.1::1234
Nexus must be accessed from one of nginx simulated domains, e.g. http://nexus3.onap.org (Because on port 80 is more services/domains, and it is distinguished by his fqdn on proxy)
Following stuff should be configured from nexus gui:

Login (default: admin / admin123)
Settings -> repositories > create repository #docker
- Select docker (hosted)
- Name: anything you want (ex: onap)
- Repository connectors: HTTP set to 8082
- Force basic authentication: UNchecked
- Enable docker V1 API: checked
Settings -> Repositories > create repository #npm
- Select npm (hosted)
- Name: npm-private
- Deployment policy: Allow redeploy
Settings -> Repositories -> create repository #maven
- Select maven2 (hosted)
- Name: maven2
- Deployment policy: Allow redeploy
Settings -> Security -> Realms
- Add Docker Bearer Token Realm
- Add npm Bearer Token Realm
Settings -> Security -> Users
- Add user docker / pwd docker
- Rights same as anonymous

...

OOM ONAP offline installer
Self-Installer Package Build Guide
(Community Edition)

Image Added

This document is describing procedure for generating SI (self-installer) archive based on source code.

It's supposed to be triggered on server with internet connectivity and will download all artifacts required for stable/beijing deployment based on our static lists.
Procedure was completely tested on RHEL 7.4 as it's our target platform, however with small adaptations it should be applicable also for other platforms.

Part 1. Preparations
Part 2. Download artifacts for offline installer
Part 3. Populate local nexus
Part 4. Creating self-install archive:

Anchor

	_nw5r7pa7d1yk
	_nw5r7pa7d1yk

Version Control

Version	Date	Modified by	Comment
0.1	13.10.2018	Michal Ptacek	First draft

Contributors

Name	Mail
Michal Ptá?ek	m.ptacek@partner.samsung.com
Samuli Silvius	s.silvius@partner.samsung.com
Timo Puha	t.puha@partner.samsung.com
Petr Ospalý	p.ospaly@partner.samsung.com
Pawel Mentel	p.mentel@samsung.com
Witold Kopeld	w.kopel@samsung.com

Anchor

	_jnii4k4mcllv
	_jnii4k4mcllv

Anchor
_k3napp3jkwvq
_k3napp3jkwvq
Part 1. Preparations

We assume that procedure is executed on:

Rhel 7.4 server with ~200G disc space, 16G+ RAM
Internet connectivity

More-over following packages has to be installed

screen expect nodejs git wget createrepo python2-pip patch
docker (exact version, from centos repo)
source code of offline installer

This can be achieved by following commands:

Register server (rhel only)

Code Block
subscription-manager register --username <rhel licence name> --password <password> --auto-attach

enable EPEL

Code Block

yum install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
# enable rhel-7-server-e4s-optional-rpms in /etc/yum.repos.d/redhat.repo
# to get following rpm available (icewm dependency)
# fribidi x86_64 0.19.4-6.el7 rhel-7-server-e4s-optional-rpms

install following packages

Code Block
yum install -y screen expect nodejs git wget createrepo python2-pip patch yum-utils

install docker

Code Block
curl https://releases.rancher.com/install-docker/17.03.sh \| sh

install docker alternative - both rhel and centos:

Code Block
yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo yum install docker-ce-17.03.3.ce-1.el7 docker-ce-selinux-17.03.3.ce-1.el7

start docker
Code Block
systemctl start docker

7. download the installer

Code Block
git clone https://git.onap.org/integration/devtool cd devtool git checkout remotes/origin/beijing cd onap-offline

Anchor

	_9i96cnscrdvw
	_9i96cnscrdvw

Part 2. Download artifacts for offline installer

All artifacts should be downloaded by running following script

Code Block
./bash/tools/download_offline_data_by_lists.sh

Download is as reliable as network connectivity to internet, it's highly recommended to run it in screen and save log file from this script execution for checking

if all artifacts were successfully collected. Each start and end of script call should contain timestamp in console output.

Downloading consists of 12 steps, which should be checked at the end one-by-one.

*Verify:* +Please take a look on following comments to respective parts of download script+

[Step 1/12 Download collected docker images]

[Step 2/12 Download manually collected docker images]

Info
both image download steps are quite reliable and contain retry logic

E.g

Code Block

== pkg #143 of 163 ==
rancher/etc-host-updater:v0.0.3 digest:sha256:bc156a5ae480d6d6d536aa454a9cc2a88385988617a388808b271e06dc309ce8
Error response from daemon: Get https://registry-1.docker.io/v2/rancher/etc-host-updater/manifests/v0.0.3: Get https://auth.docker.io/token?scope=repository%3Arancher%2Fetc-host-updater%3Apull&service=registry.docker.io: net/http: TLS handshake timeout
WARNING [!]: warning Command docker -l error pull rancher/etc-host-updater:v0.0.3 failed. Attempt: 2/5
INFO: info waiting 10s for another try...
v0.0.3: Pulling from rancher/etc-host-updater
b3e1c725a85f: Already exists
6a710864a9fc: Already exists
d0ac3b234321: Already exists
87f567b5cf58: Already exists
16914729cfd3: Already exists
83c2da5790af: Pulling fs layer
83c2da5790af: Verifying Checksum
83c2da5790af: Download complete
83c2da5790af: Pull complete

[Step 3/12 Build own nginx image]

Note
there is no hardening in this step, if it failed needs to be retriggered. It should end with “Successfully built <id>”

[Step 4/12 Save docker images from docker cache to tarfiles]

Info
quite reliable, retry logic in place

[Step 5/12 move infra related images to infra folder]

Info
should be safe, precondition is not failing step(3)

[Step 6/12 Download git repos]

Note
potentially unsafe, no hardening in place. If it not download all git repos. It has to be executed again. Easiest way is probably to comment-out other steps in load script and run it again.

E.g.

Code Block

Cloning into bare repository 'github.com/rancher/community-catalog.git'...
error: RPC failed; result=28, HTTP code = 0
fatal: The remote end hung up unexpectedly
Cloning into bare repository 'git.rancher.io/rancher-catalog.git'...
Cloning into bare repository 'gerrit.onap.org/r/testsuite/properties.git'...
Cloning into bare repository 'gerrit.onap.org/r/portal.git'...
Cloning into bare repository 'gerrit.onap.org/r/aaf/authz.git'...
Cloning into bare repository 'gerrit.onap.org/r/demo.git'...
Cloning into bare repository 'gerrit.onap.org/r/dmaap/messagerouter/messageservice.git'...
Cloning into bare repository 'gerrit.onap.org/r/so/docker-config.git'...

[Step 7/12 Download http files]

[Step 8/12 Download npm pkgs]

[Step 9/12 Download bin tools]

Info
work quite reliably, If it not download all artifacts. Easiest way is probably to comment-out other steps in load script and run it again.

[Step 10/12 Download rhel pkgs]

Note

this is the step which will work on rhel only, for other platform different packages has to be downloaded.

We need just couple of rpms, but those has a lot of dependencies (mostly because of vnc).

Script is also download all perl packages from all repos, but we need around dozen of them.

Following is considered as successful run of this part:

Code Block

    Available: 1:net-snmp-devel-5.7.2-32.el7.i686 (rhel-7-server-rpms)
       net-snmp-devel = 1:5.7.2-32.el7
   Available: 1:net-snmp-devel-5.7.2-33.el7_5.2.i686 (rhel-7-server-rpms)
       net-snmp-devel = 1:5.7.2-33.el7_5.2
Dependency resolution failed, some packages will not be downloaded.
No Presto metadata available for rhel-7-server-rpms
https://ftp.icm.edu.pl/pub/Linux/fedora/linux/epel/7/x86_64/Packages/p/perl-CDB_File-0.98-9.el7.x86_64.rpm: [Errno 12] Timeout on https://ftp.icm.edu.pl/pub/Linux/fedora/linux/epel/7/x86_64/Packages/p/perl-CDB_File-0.98-9.el7.x86_64.rpm:
(28, 'Operation timed out after 30001 milliseconds with 0 out of 0 bytes received')
Trying other mirror.
Spawning worker 0 with 230 pkgs
Spawning worker 1 with 230 pkgs
Spawning worker 2 with 230 pkgs
Spawning worker 3 with 230 pkgs
Spawning worker 4 with 229 pkgs
Spawning worker 5 with 229 pkgs
Spawning worker 6 with 229 pkgs
Spawning worker 7 with 229 pkgs
Workers Finished
Saving Primary metadata
Saving file lists metadata
Saving other metadata
Generating sqlite DBs
Sqlite DBs complete

[Step 11/12 Download oom]

Note

this step is downloading oom repo into ./resources/oom and patch it using our patch file. If this step is retried after previously passing it will lead to inconsistent oom repo.

Because patch will fail and create some .rej files, which will be marked as broken during onap_deploy part later.

E.g. successful run looks like this:

Code Block

Checkout base commit which will be patched
Switched to a new branch 'patched_beijing'
patching file kubernetes/appc/values.yaml
patching file kubernetes/common/dgbuilder/templates/deployment.yaml
patching file kubernetes/dcaegen2/charts/dcae-cloudify-manager/templates/deployment.yaml
patching file kubernetes/dmaap/charts/message-router/templates/deployment.yaml
patching file kubernetes/onap/values.yaml
patching file kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/apps-install.sh
patching file kubernetes/policy/charts/drools/resources/scripts/update-vfw-op-policy.sh
patching file kubernetes/policy/resources/config/pe/push-policies.sh
patching file kubernetes/robot/values.yaml
patching file kubernetes/sdnc/charts/sdnc-ansible-server/templates/deployment.yaml
patching file kubernetes/sdnc/charts/sdnc-portal/templates/deployment.yaml
patching file kubernetes/uui/charts/uui-server/templates/deployment.yaml

[Step 12/12 Download sdnc-ansible-server packages]

Note

there is again no retry logic in this part, it’s collecting packages for sdnc-ansible-server in the exactly same way how that container is doing it,

however there is a bug in upstream that image in place won’t work with those packages as old ones are not available and newer are not compatible with other stuff inside that image

Following is approximate size of all artifacts after successful download

Code Block

[root@upstream-master onap-offline]# for i in `ls -1 resources/`;do du -h resources/$i | tail -1;done
126M    resources/downloads
97M     resources/git-repo
61M     resources/http
91G     resources/offline_data
36M     resources/oom
638M    resources/pkg

Anchor
_a701bwfyn06x
_a701bwfyn06x

Anchor
_a701bwfyn06x
_a701bwfyn06x
Part 3. Populate local nexus

Prereq:

Cleaned repos (ensure that we use our packages from onap.repo only)

Code Block
mkdir /etc/yum.repos.d-backup && mv /etc/yum.repos.d/*.repo /etc/yum.repos.d-backup/

actual directory with local_repo.conf
Code Block
./bash/tools/deploy_nexus.sh
User is prompted for local ip, where nexus should be deployed
For accessing nexus GUI, feel free to use preconfigured VNC server (adjust the firewall on the host server)
One just need to create ssh tunnel to vcnserver and connect it with vncviewer
vncserver listens on 5901 and password is onap
Code Block
$ ssh -NfL 1234:127.0.0.1:5901 <the host server> $ vncviewer 127.0.0.1::1234
Nexus must be accessed from one of nginx simulated domains,
e.g. http://nexus3.onap.org (Because on port 80 is more services/domains, and it is distinguished by his fqdn on proxy)
Note
VNCserver is just example how to access nexus gui, alternatively tunnel can be created. All of this is not needed if server can be reached directly.

Following stuff should be configured from nexus gui:

Login (default: admin / admin123)
Settings -> repositories > create repository #docker
- Select docker (hosted)
- Name: anything you want (ex: onap)
- Repository connectors: HTTP set to 8082
- Force basic authentication: UNchecked
- Enable docker V1 API: checked
Settings -> Repositories > create repository #npm
- Select npm (hosted)
- Name: npm-private
- Deployment policy: Allow redeploy
Settings -> Repositories -> create repository #maven
- Select maven2 (hosted)
- Name: maven2
- Deployment policy: Allow redeploy
Settings -> Security -> Realms
- Add Docker Bearer Token Realm
- Add npm Bearer Token Realm
Settings -> Security -> Users
- Add user docker / pwd docker
- Rights same as anonymous

docker
Image Added

#Once nexus is created and configured, use following script

to load docker / npm & maven artifacts into it
Code Block
./bash/tools/load_stored_offline_data.sh
Once all artifacts are safely loaded into nexus, original directory with tar files of images

can be removed, we don't need them inside SI archive anymore
E.g

Code Block
rm -rf ./resources/offline_data/docker_images_for_nexus/*

Anchor

	_vnuouonjedsv
	_vnuouonjedsv

Anchor
_cm1dw6eiwtv9
_cm1dw6eiwtv9

Part 4. Creating self-install archive:

Note: as nexus_data is mounted folder into nexus, we recommend to stop nexus first before launching SI archive create script

E.g.

Code Block
[root@upstream-master onap-offline]# docker ps CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS

...

./cfg/v3.ext
./bash/tools/common-functions.sh // variable SIMUL_HOSTS
./cfg/nginx.conf // see below

Add record to nginx
Add record to nginx ./cfg/nginx.conf
This file is mounted inside nginx container, so only container restart is needed.
Find section which you need (nexus, git)
In the section update variable named server_name.
If you updating git, then you must also create bare repo in ./resources/git-repo/
Finish

Recreate nexus_server.crt

$ ./bash/tools/certificates/2create_cert_for_nginx.sh

Restart nginx container

...

              NAMES
74d50a5d5212        own_nginx "/bin/sh -c 'spawn..."   7 hours ago Up 7 hours 0.0.0.0:80->80/tcp, 0.0.0.0:443->443/tcp, 0.0.0.0:10001->443/tcp   nginx
b73ae7b76d71        sonatype/nexus3 "sh -c ${SONATYPE_..."   7 hours ago Up 7 hours 8081/tcp                                                           nexus

[root@upstream-master onap-offline]# docker stop b73ae7b76d71
b73ae7b76d71

SI (self-installer) package can be created with prepopulated data via following command

Code Block
./bash/tools/create_si_onap_pkg.sh <package_suffix_name>

E.g. ./bash/tools/create_si_onap_pkg.sh beijing1

Versions Compared

Old Version 10

New Version Current

Key

OOM ONAP offline installer
Self-Installer Package Build Guide
(Community Edition)

Anchor
_k3napp3jkwvq
_k3napp3jkwvq
Part 1. Preparations

Part 2. Download artifacts for offline installer

Anchor
_a701bwfyn06x
_a701bwfyn06x

Anchor
_a701bwfyn06x
_a701bwfyn06x
Part 3. Populate local nexus

Anchor
_cm1dw6eiwtv9
_cm1dw6eiwtv9

Part 4. Creating self-install archive:

Page Comparison

Versions Compared

Old Version 10

New Version Current

Key

<span class="diff-html-changed" data-a11y-before="Start of changed content" data-a11y-after="End of changed content" id="changed-diff-0">[data-colorid=</span>

<span class="diff-html-added" data-a11y-before="Start of added content" data-a11y-after="End of added content" id="added-diff-2">vrsr3nd4ks</span><span class="diff-html-changed" data-a11y-before="Start of changed content" data-a11y-after="End of changed content" id="changed-diff-3">]{color:</span>

<span class="diff-html-added" data-a11y-before="Start of added content" data-a11y-after="End of added content" id="added-diff-4">vrsr3nd4ks</span><span class="diff-html-changed" data-a11y-before="Start of changed content" data-a11y-after="End of changed content" id="changed-diff-5">]{color:</span>

<span class="diff-html-added" data-a11y-before="Start of added content" data-a11y-after="End of added content" id="added-diff-8">kwbzqnkwqk</span><span class="diff-html-changed" data-a11y-before="Start of changed content" data-a11y-after="End of changed content" id="changed-diff-9">]{color:</span>

OOM ONAP offline installer Self-Installer Package Build Guide (Community Edition)

Anchor_k3napp3jkwvq_k3napp3jkwvqPart 1. Preparations

Part 2. Download artifacts for offline installer

Anchor_a701bwfyn06x_a701bwfyn06x

Anchor_a701bwfyn06x_a701bwfyn06xPart 3. Populate local nexus

Anchor_cm1dw6eiwtv9_cm1dw6eiwtv9

Part 4. Creating self-install archive:

OOM ONAP offline installer
Self-Installer Package Build Guide
(Community Edition)

Anchor
_k3napp3jkwvq
_k3napp3jkwvq
Part 1. Preparations

Anchor
_a701bwfyn06x
_a701bwfyn06x

Anchor
_a701bwfyn06x
_a701bwfyn06x
Part 3. Populate local nexus

Anchor
_cm1dw6eiwtv9
_cm1dw6eiwtv9