Content Comparison

...

1. Follow the above instructions to obtain an ORBIT account and upload a set of keys
2. Open PuTTY and set your Host Name to [ORBIT username]@console.sb10.orbit-lab.org (Port should be 22 by default)
3. As detailed in the above instructions, make sure you are using your private key file under Connection → SSH → Auth
4. Under Connection → SSH → Tunnels, add the following three forwarded ports:
   1. Source Port 8081 and Destination localhost:8081
   2. Source Port 40080 and Destination localhost:40080
   3. Source Port 8453 and Destination localhost:8453
5. Save your session configuration with a memorable name (optional but highly recommended)
6. Open your session, enter the passphrase for your key (if you have one), and access ORBIT
7. Tunnel 2 more times with the following commands:
   1. ssh -A -t native@node1-4 -L8081:localhost:8081 -L8453:localhost:8453 -L40080:10.3.100.30:80     (password: native)
   2. ssh -A -t ubuntu@10.31.4.65 -L8081:localhost:8081 -L8453:localhost:8453

8. Go to https://localhost:8453 and log in using admin:Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U

9. The CommScope UI can be accessed at http://localhost:40080 (please reach out if you need credentials set up)

The interface(s) should appear as shown:

Image Removed

Image Removed

Please see the following for more information:

• OWL Cloud Inventory
• Open Wireless Laboratory (OWL) at Wireless Information Network Laboratory (WINLAB)