Versions Compared

Old Version 87

changes.mady.by.user Toine Siebelink

Saved on

compared with

New Version Current

changes.mady.by.user Toine Siebelink

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

...

#IssueNotesDecision
1How will hostname and port be provided when dmiPlugin register itself and its list of cmHandles with NCMP

The team thinks that the information should instead be provided in the form of a ‘host-name’ and a ‘port’  (there was some debate on service-name v. host-name but it was settled on host-name)


e.g. "dmiPlugin" : { <host-name>,  <port> }


Where the host-name is unique. (the DB might assign an internal unique ID for each entry but that is just for indexing and x-referencing in a relation DB and this ID is not to be used/ exposed externally)

Instead of using ‘host-names’ and ‘ports’ parameters between java applications when in the cloud all we need is ‘service-names’ . The mapping of service-names to hosts and ports is done as part of the cloud configuration, in our case Kubernetes. And these are dynamic! The client application can then use a simple dns-lookup to connect to an instance of the service.

Using service names also allows any plugin to use implement scaling as they see fit e.g. partitioning


For the ONAP DMI Plugin which initial have only 1 instance we can simply hard-code the service-name and us the same name in the Kubernetes configuration e.g. “onap.cps.dmiPlugin"
2Additional information in request body duplicates cmHandleId this is redundant informationSuggested to remove from request body to avoid possible error scenarios.Only the one with the additionalInformation is needed and remove body
3No need for Sync method, this is basic standard read operation at the root level for that cmHandle

4Use include 'location' property when request yang-module sourcesSuggestion: do include it in the request but allow dmiPlugin to decide to use it or now. Location (this leaf is called schema in older RFC7895) is not mandatory to support in YANG library and nodes may not include it. Another alternative presumably used also by ODL itself is the <get-schema> RPC. The key difference is that the YANG module definition is sent directly over the NETCONF channel, not requiring separate file servers and clients. So this is maybe one more reason that the ONAP DMI plugin currently doesn’t need the location attribute.

Location is not needed for any plugin and could only lead to ambiguity therefore will NOT be included in this request

5Inconsistent use of "Operation" and/or HTTP Methods to distinguish write operationsCurrently this page proposes to use "Operation=update" request body parameter for restconf "Replace" and "Patch" operations and use the HTTP (RESTFul) operation to distinguish between them. It also proposes to use PUT  HTTP for Read and Delete operations (sad) Basically a very confusing an unintuitive use of HTTP operations to distinguish ambiguous operations that instead easily could be defined by just using the 'operation' field in the request body.

Proposal Toine: For Consistent (restful) design I would suggest to think as the operation to DMI-Plugin (always with body) as "creating a new order to do something" toward DMI-Plugin. Ie always a HTTP POST (or PUT?) operation. The "operation " in the body can simple be extended to include both "update" and "patch" as required. If the 'operation' is NOT supplied "read" wil be assumed as the default operation

See also CPS-577: Prepare the request from client and send write request to dmi-plugin-NCMP - DMI - SDNC Request and Response Mapping


Proposal agreed by stakeholders in meeting  

  • Only 'POST' method needs to be supported
  • use term 'Update' instead of 'replace'

...

NCPS-NCMP - DMI Plugin Write Request Flow

See CPS-577: Prepare the request from client and send write request to dmi-plugin-NCMP - DMI - SDNC Request and Response Mapping

Datastore

If the cmhandle metadata indicates that data is not synched in CPS then the request is forwarded to the dmiPlugin

...

Excerpt

Request Format for Data Access

Code Block
languagexml
titlerequest body
{
  “operation”: “<operation>”,         // Valid operations are: “create”, “read”, “update”, “patch” and “delete”.
                                      // For update
  "dataType": "<dataType>", replace and patch is distinguished by the HTTP method (PUT or PATCH)// e.g.   "dataType": "<dataType>","application/yang.data"

    “data”: {                           // Embedded data as a String.
    <data>                            // required for create and update operations. Optional filter-data for read-operations
  },

  “cmHandleProperties”: {           // Additional properties for CM handle previously added by DMI plugin and stored in NCMP.
    <properties>
  }
}


...

Expand
titleAPI Details

Below table shows the proposed interface, actual implementation might deviate from this but can be accessed from

*For response output, where applicable the yang-library format and conventions are used 'as is'  or extended

#Use CaseRest MethodURIExample*
1

Get module set for a cmhandle


POST{dmiRoot}/dmi/v1/ch/cmhandle-001/modules

Header :
Content-Type: application/json


Code Block
languagexml
titleRequest Body
{
  "operation": "read",
    "cmHandleProperties ": {
      "subSystemId": "system-001"
    }
  }
}

Code Block
languagexml
titleResponse Body
Response:  
     "schemas": [
                    {
                      "moduleName": "example-identifier",
                      "revision": "example-version",
                      "namespace": "example-namespace"
                    },
					{
						...
					}
                  ]
                }

2Get yang module source for a list of modulesPOST

{dmiRoot}/dmi/v1/ch/<cmHandle>/moduleResources


DMI Plugin will make multiple requests to xNF and combine the result in a list


Code Block
languagexml
titleRequest Body
{
  "operation": "read",
	"dataType": "application/json",
    "data": {
       "modules": [
        {
          "name": "pnf-sw-upgrade",
          "revision": "2019-12-03"
        }
      ]
    },
    "cmHandleProperties": {
      "subSystemId": "system-001"
    }
}


Response: a list yang module references and source for each

Code Block
languagexml
titleResponse Body
[ {
"name" : "pnf-sw-upgrade",
"revision" : "2019-12-03",
"yang-source": "some-source", {...} ]


...