Page Comparison

This page describes how to get the Istanbul release version of A1-Policy functions up and running.

...

• Copy the default configuration file oran/a1-policy-management/config/application_configuration.json (Istanbul) to the current directory, then replace/amend the configuration with the sample demo configuration below.
  (Note the configuration below is just a sample, and should be updated to match particular deployments.  The deployment below assumes 4 near-RT-RICs exist - addressable at the urls given. See the step "Run OSC Near-RT-RIC/A1 Simulator Docker Containers" below)

• The controller hostname, port, username and password values to access the A1 controller must match the values configured for the SDNC-A1-Controller. (See the step "Run A1 Controller" further below). The port for http is 8181.
  (Note the configuration below is just a sample, and should be updated to match particular deployments.  The deployment below assumes an A1 Controller function (SDNC) exists - addressable at the url given, using the authentication credentials given.)

• Any defined ric host names (in the name and baseUrl for each ric) must match the given docker container names in near-RT-RIC simulator startup - port is always the simulator's internal port 8085 for http or 8185 for https.

• The A1 Policy Management service can entirely by-pass the A1-Controller if required - it is optional to access the near-RT-RIC through an A1-Controller.
  In the configuration the "controller" property is optional in the "ric" objects, and the "controller" object at the top can be omitted if no controller is used.
  If all configured rics bypass the A1-Controller there is no need to start an A1-Controller. There is no functional gain in accessing the near-RT-RIC through an A1 controller.

...

...

• Start docker containers for each near-RT-RIC defined in oran/a1-policy-management/config/application_configuration.json in the step for "Configuration Policy Management Service" (in this example for ric1 and ric2) and providing A1 interface version OSC_2.1.0 with the following commands (use separate shells):

  Code Block
  language bash
  (Each in a new shell) docker run -p 8085:8085 -p 8185:8185 -e A1_VERSION=OSC_2.1.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric1 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.1.0 docker run -p 8086:8085 -p 8186:8185 -e A1_VERSION=OSC_2.1.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric2 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.1.0 docker run -p 8087:8085 -p 8187:8185 -e A1_VERSION=STD_2.0.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric3 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.1.0 docker run -p 8088:8085 -p 8188:8185 -e A1_VERSION=STD_2.0.0 -e ALLOW_HTTP=true --network=nonrtric-docker-net --name=ric4 nexus3.o-ran-sc.org:10002/o-ran-sc/a1-simulator:2.1.0

  (Note these commands create a deployment scenario aligned towards the sample A1 Policy configuration given above)
  (Note these commands can be run in the background - all in one shell - by using docker run -d -p ..... )
  
  

• Create a policy type json to load into the A1 simulators (running version OSC.2.1.0)

  Code Block
  language js title pt1.json
  { "name": "pt1", "description": "pt1 policy type", "policy_type_id": 1, "create_schema": { "$schema": "http://json-schema.org/draft-07/schema#", "title": "OSC_Type1_1.0.0", "description": "Type 1 policy type", "type": "object", "properties": { "scope": { "type": "object", "properties": { "ueId": { "type": "string" }, "qosId": { "type": "string" } }, "additionalProperties": false, "required": [ "ueId", "qosId" ] }, "qosObjectives": { "type": "object", "properties": { "priorityLevel": { "type": "number" } }, "additionalProperties": false, "required": [ "priorityLevel" ] } }, "additionalProperties": false, "required": [ "scope", "qosObjectives" ] } }

  
  

• Put the example policy type into the started A1 simulator instances by running these curl commands (in this example to ric1 exposed to port 8085 and ric2 exposed to port 8086):

  Code Block
  language bash
  curl -X PUT -v "http://localhost:8085/a1-p/policytypes/1" -H "accept: application/json" \ -H "Content-Type: application/json" --data-binary @pt1.json curl -X PUT -v "http://localhost:8086/a1-p/policytypes/1" -H "accept: application/json" \ -H "Content-Type: application/json" --data-binary @pt1.json

  
  

• Create a policy type json to load into the A1 simulators (running version STD.2.0.0)

  Code Block
  language js title std_qos2_0.0.1.json
  { "policySchema": { "$schema": "http://json-schema.org/draft-07/schema#", "title": "STD_QOS2_0.1.0", "description": "STD QOS2 policy type", "type": "object", "properties": { "scope": { "type": "object", "properties": { "ueId": { "type": "string" }, "qosId": { "type": "string" } }, "additionalProperties": false, "required": [ "ueId", "qosId" ] }, "qosObjectives": { "type": "object", "properties": { "priorityLevel": { "type": "number" } }, "additionalProperties": false, "required": [ "priorityLevel" ] } } }, "statusSchema": { "$schema": "http://json-schema.org/draft-07/schema#", "title": "STD_QOS_0.2.0", "description": "STD QOS policy type status", "type": "object", "properties": { "enforceStatus": { "type": "string" }, "enforceReason": { "type": "string" }, "additionalProperties": false, "required": [ "enforceStatus" ] } } }

  
  

• Put the example policy type into the started A1 simulator instances by running these curl commands (in this example to ric3 exposed to port 8087 and ric4 exposed to port 8088):

  Code Block
  language bash
  curl -X PUT -v "http://localhost:8087/policytype?id=STD_QOS2_0.1.0" -H "accept: application/json" \ -H "Content-Type: application/json" --data-binary @std_qos2_0.0.1.json curl -X PUT -v "http://localhost:8088/policytype?id=STD_QOS2_0.1.0" -H "accept: application/json" \ -H "Content-Type: application/json" --data-binary @std_qos2_0.0.1.json

  
  

...