This page mainly describes the template design steps of option2 for the E2E Network Slicing use case for Guilin release.
Details of the Frankfurt Template design can be found at Design Service Templates.
Details of G release model design principle, background and structure can be found at Modeling enhancements.
Goal: Design all templates of option2 for 5G E2E Network Slicing Use Case, which are enhanced version based on Frankfurt release.
Tool: SDC(image version:1.7.1)
The template structure is as follows：
Design steps：
Table of Contents
...
1. In the General section, complete all required fields.
- Suggest 'TN_Network_Requirement' as the name to indicate the meaning of the service.
- Select ‘TN Network Requirement’ as Category.
2. In Properties Assignment section, define the following service properties.
3. Distribute the service model and check the results.
2.Create TN_Network_Req_AR（Allotted Resource，New in G release）
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
- Suggest 'TN_Network_Req_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of TN_Network_Requirement to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
3.Create Tn_ONAP_internal_BH Service Template（New in G release）
...
1. In the General section, complete all required fields.
- Suggest 'Tn_ONAP_internal_BH' as the name to indicate the meaning of the service.
- Select ‘TN BH NSST’ as Category.
2. In Composition section，search 'TN_Network_Req_AR', drag the element from the Elements palette to the service canvas.
3.In Properties Assignment section, define the following service properties.
4. Distribute the service model and check the results.
4.Create EmbbAn_NF Service Template（New in G release）
...
1. In the General section, complete all required fields.
- Suggest 'EmbbAn_NF' as the name to indicate the meaning of the service.
- Select ‘AN NF NSST’ as Category.
2. In Properties Assignment section,define Service properties.
a. Click 
5.Create EmbbCn_External Service Template
...
1. In the General section, complete all required fields.
- Suggest 'EmbbCn_External' as the name to indicate the meaning of the service.
- Select ‘CN NSST’ as Category.
2. In Composition section, add artifacts at the service level:
a. Click an empty area in the canvas and click Deployment Artifacts (right pane).
b. Click 
c. Click Browse, upload the file provided bellow.
View file name eMBB.zip height 250
d. Select ’WORKFLOW‘ as type because SDC doesn't provide type extension and the ‘Ohter’ type is deleted in the latest version.
3. In Properties Assignment section,define Service properties.
a. Click
c. Set property values as shown bellow.
6.Create Tn_BH_AR（Allotted Resource，New in G release）
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
- Suggest 'Tn_BH_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of Tn_ONAP_internal_BH to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
7.Create EmbbAn_NF_AR（Allotted Resource，New in G release）
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
- Suggest 'EmbbAn_NF_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of EmbbAn_NF to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
8.EmbbCn_External_AR（Allotted Resource，New in G release）
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
- Suggest 'EmbbCn_External_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Use the value of EmbbCn_External to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.
9.Create EmbbNst_O2 Service Template
...
1. In the General section, complete all required fields.
- Suggest 'EmbbNst_O2' as the name to indicate the meaning of the service.
- Select ‘NST’ as Category.
2. In Composition section，drag the elements of ‘EmbbCn_External_AR’，‘EmbbAn_NF_AR’，‘Tn_BH_AR’ from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click
c. Set property values as shown bellow.
10.Create Slice_AR（Allotted Resource）
Login SDC HOME page with Designer Role and add VF.
1. In the General section, complete all required fields.
- Suggest 'Slice_AR' as the name to indicate the meaning of the service.
- Select ‘Allotted Resource’ as Category.
2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section, define Service properties.
a. Click 'AllottedResource 0' in the right pane
b. Select 'providing_service_invariant_uuid' and 'providing_service_uuid' and click Declare Input.
11.Create SliceProfile_AN_O2 Service Template（New in G release）
...
1. In the General section, complete all required fields.
- Suggest 'SliceProfile_AN_O2' as the name to indicate the meaning of the service.
- Select ‘AN SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
e. Click 'Slice_AR 0'in the right pane
f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
12.Create SliceProfile_TN Service Template（New in G release）
...
1. In the General section, complete all required fields.
- Suggest 'SliceProfile_TN' as the name to indicate the meaning of the service.
- Select ‘TN SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Add some properties as the picture shown bellow.
b. Select all properties and click Declare Input.
c. Click 'Slice_AR 0'in the right pane
d. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
4. Distribute the service model and check the results.
13.Create SliceProfile_AN_O2 Service Template（New in G release）
...
1. In the General section, complete all required fields.
- Suggest 'SliceProfile_AN_O2' as the name to indicate the meaning of the service.
- Select ‘AN SliceProfile’ as Category.
2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.
3. Properties Assignment section, define Service properties.
a. Click
e. Click 'Slice_AR 0'in the right pane
f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.
14.Create ServiceProfile_O2 Service Template
...
1. In the General section, complete all required fields.
- Suggest 'ServiceProfile_O2' as the name to indicate the meaning of the service.
- Select ‘ServiceProfile’ as Category.
2. In Composition section，search 'Slice_AR', ’SliceProfile_CN‘，‘SliceProfile_AN_O2’，‘SliceProfile_TN’，drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
15.Create CST_O2 Service Template
...
1. In the General section, complete all required fields.
- Suggest 'CST_O2' as the name to indicate the meaning of the service.
- Select ‘CST’ as Category.
2. In Composition section，search 'ServiceProfile_O2', drag the element from the Elements palette to the service canvas.
3. In Properties Assignment section,define Service properties.
a. Click
