Page Comparison

This page mainly describes the template design steps of option2  for the E2E Network Slicing use case for Guilin release.

Details of the Frankfurt Template design can be found at Design Service Templates. 

Details of model design principle, background and structure can be found at at Modeling enhancements.

Goal: Design all templates of option2 for 5G E2E Network Slicing Use Case, which are enhanced version based on Frankfurt release.

Tool: SDC(image version:1.7.1)

The template structure is as follows：

Design steps：

...

1. In the General section, complete all required fields.

• Suggest 'TN_Network_Requirement' as the name to indicate the meaning of the service.
• Select ‘TN Network Requirement’ as Category.

2. In Properties Assignment section, define the following service properties.

Image Modified

3. Distribute the service model and check the results.

Create TN_Network_Req_AR（Allotted Resource，New in G release）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'TN_Network_Req_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of TN_Network_Requirement to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

Create Tn_ONAP_internal_BH Service Template（New in G release）

...

1. In the General section, complete all required fields.

• Suggest 'Tn_ONAP_internal_BH' as the name to indicate the meaning of the service.
• Select ‘TN BH NSST’ as Category.

2. In Composition section，search 'TN_Network_Req_AR', drag the element from the Elements palette to the service canvas.

3.In Properties Assignment section, define the following service properties.

4. Distribute the service model and check the results.

Create EmbbAn_NF Service Template（New in G release）

...

1. In the General section, complete all required fields.

• Suggest 'EmbbAn_NF' as the name to indicate the meaning of the service.
• Select ‘AN NF NSST’ as Category.

2. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

Image Modified

3. Distribute the service model and check the results.

Create EmbbCn_External Service Template

...

1. In the General section, complete all required fields.

• Suggest 'EmbbCn_External' as the name to indicate the meaning of the service.
• Select ‘CN NSST’ as Category.

2. In Composition section, add artifacts at the service level:

a. Click an empty area in the canvas and click Deployment Artifacts (right pane).

b. Click Image Modified

c. Click Browse, upload the file provided bellow.

d. Select ’OTHER‘ ’WORKFLOW‘ as type because SDC doesn't provide type extension and the ‘Ohter’ type is deleted in the latest version.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.NSSCapabilities’ as type.

        c. Set property values as shown bellow.

4. Distribute the service model and check the results.

Create Tn_BH_AR（Allotted Resource，New in G release）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'Tn_BH_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of Tn_ONAP_internal_BH to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

Image Modified

Create EmbbAn_NF_AR（Allotted Resource，New in G release）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'EmbbAn_NF_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of EmbbAn_NF to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

Create EmbbCn_External_AR（Allotted Resource，New in G release）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'EmbbCn_External_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Use the value of EmbbCn_External to set 'providing_service_invariant_uuid' and 'providing_service_uuid' and 'providing_service_name'.

Create EmbbNst_O2 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'EmbbNst_O2' as the name to indicate the meaning of the service.
• Select ‘NST’ as Category.

2. In Composition section，drag the elements of ‘EmbbCn_External_AR’，‘EmbbAn_NF_AR’，‘Tn_BH_AR’ from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.NSCapabilities’ as type.

        c. Set property values as shown bellow.

Image Modified

4. Distribute the service model and check the results.

Create Slice_AR（Allotted Resource）

Login SDC HOME page with Designer Role and add VF.

1. In the General section, complete all required fields.

• Suggest 'Slice_AR' as the name to indicate the meaning of the service.
• Select ‘Allotted Resource’ as Category.

2. In Composition section，search 'Allotted Resource', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section, define Service properties.

a. Click 'AllottedResource 0' in the right pane

b. Select 'providing_service_invariant_uuid' and 'providing_service_uuid' and click Declare Input.

Image Modified

Create SliceProfile_AN_O2 Service Template（New in G release）

...

1. In the General section, complete all required fields.

• Suggest 'SliceProfile_AN_O2' as the name to indicate the meaning of the service.
• Select ‘AN SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.SliceProfile’ as type.

c.  Add some properties as shown bellow.

Image Modified

d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）

e. Click 'Slice_AR 0'in the right pane

f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

Image Modified

4. Distribute the service model and check the results.

Create SliceProfile_TN Service Template（New in G release）

...

1. In the General section, complete all required fields.

• Suggest 'SliceProfile_TN' as the name to indicate the meaning of the service.
• Select ‘TN SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Add some properties as the picture shown bellow.

Image Modified

b. Select all properties and click Declare Input.

c. Click 'Slice_AR 0'in the right pane

d. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

4. Distribute the service model and check the results.

Create SliceProfile_AN_O2 Service Template（New in G release）

...

1. In the General section, complete all required fields.

• Suggest 'SliceProfile_AN_O2' as the name to indicate the meaning of the service.
• Select ‘AN SliceProfile’ as Category.

2. In Composition section，search 'Slice_AR', drag the element from the Elements palette to the service canvas.

3. Properties Assignment section, define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.SliceProfile’ as type.

c.  Add some properties as shown bellow.

d. Select all properties and click Declare Input（For the sliceprofile type, select all attributes）

e. Click 'Slice_AR 0'in the right pane

f. Select 'allottedresource0_providing_service_invariant_uuid' and 'allottedresource0_providing_service_uuid' and click Declare Input.

4. Distribute the service model and check the results.

Create ServiceProfile_O2 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'ServiceProfile_O2' as the name to indicate the meaning of the service.
• Select ‘ServiceProfile’ as Category.

2. In Composition section，search 'Slice_AR', ’SliceProfile_CN‘，‘SliceProfile_AN_O2’，‘SliceProfile_TN’，drag the element from the Elements palette to the service canvas.

Image Modified

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.ServiceProfile’ as type.

c. Select some attributes of  ServiceProfile as bellow picture shows and click Declare Input .

Image Modified

4. Distribute the service model and check the results.

Create CST_O2 Service Template

...

1. In the General section, complete all required fields.

• Suggest 'CST_O2' as the name to indicate the meaning of the service.
• Select ‘CST’ as Category.

2. In Composition section，search 'ServiceProfile_O2', drag the element from the Elements palette to the service canvas.

3. In Properties Assignment section,define Service properties.

a. Click Image Modified

b. Input name and  select ‘org.openecomp.datatypes.CSProperties’ as type.

c. Select all attributes of  ServiceProfile except 'sNSSAI' and click Declare Input .

4. Distribute the service model and check the results.