EVENT_START_INSTANTIATION:
EVENT_END_INSTANTIATION:
EVENT_START_SCALING:
EVENT_END_SCALING:
EVENT_START_SCALING_TO_LEVEL:
EVENT_END_SCALING_TO_LEVEL:
EVENT_START_HEALING:
EVENT_END_HEALING:
EVENT_START_TERMINATION:
EVENT_END_TERMINATION:
EVENT_START_VNF_FLAVOR_CHANGE:
EVENT_END_VNF_FLAVOR_CHANGE:
EVENT_START_VNF_OPERATION_CHANGE:
EVENT_END_VNF_OPERATION_CHANGE:
EVENT_START_VNF_EXT_CONN_CHANGE:
EVENT_END_VNF_EXT_CONN_CHANGE:
EVENT_START_VNFINFO_MODIFICATION:
EVENT_END_VNFINFO_MODIFICATION:

Classes from Common Sub-Model

AffinityOrAntiAffinityGroup class

The AffinityOrAntiAffinityGroup class describes the affinity or anti-affinity relationship. For NSs, those rules are applicable between the VNF instances created using different VnfProfiles, the Virtual Link instances created using different VlProfiles or the nested NS instances created using different NsProfiles.

For VNFs, those rules are applicable between the virtualization containers to be created based on different VDUs, or between internal VLs to be created based on different VnfVirtualLinkDesc(s).

Applied Stereotypes:

OpenModelClass

- support: MANDATORY

Preliminary
Reference

- reference: IFA011 v2.5.1

Attribute Name	Type	Mult.	Description	Stereotypes
groupId	Identifier	1	Identifies an affinity or anti-affinity group to which the affinity or anti-affinity rule applies.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
type	RuleType	1	Specifies whether the rule is an affinity rule or an anti-affinity rule.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
scope	RuleScope	1	Specifies the scope of the rule.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY

Datatypes from Common Sub-Model

AddressData

The AddressData information element supports providing information about the addressing scheme and parameters applicable to a CP.

Applied Stereotypes:

Preliminary

Attribute Name	Type	Mult.	Description	Stereotypes
addressType	AddressType	1	Describes the type of the address to be assigned to the CP instantiated from the parent CPD. The content type shall be aligned with the address type supported by the layerProtocol attribute of the parent CPD.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
l2AddressData	L2AddressData	0..1	Provides the information on the MAC addresses to be assigned to the CP(s) instantiated from the parent CPD. Shall be present when the addressType is MAC address.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
l3AddressData	L3AddressData	0..1	Provides the information on the IP addresses to be assigned to the CP instantiated from the parent CPD. Shall be present when the addressType is IP address.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY

ConnectivityType

The ConnectivityType datatype specifies the protocol exposed by a VL and the flow pattern supported by the VL.The top layer protocol of the VL protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Mult.

Description

Stereotypes

layerProtocol

LayerProtocol

1

Identifies the protocols to which this VL gives access (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire).

Preliminary

OpenModelAttribute

isInvariant: false
valueRange: no range constraint
support: MANDATORY

flowPattern

String

0..1

Identifies the flow pattern of the connectivity (Line, Tree, Mesh).

Preliminary

OpenModelAttribute

isInvariant: false
valueRange: no range constraint
support: MANDATORY

CpProtocolData

A CpProtocolData information element describes and associates the protocol layer that a CP uses together with other protocol and connection point information.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Mult.

Description

Stereotypes

associatedLayerProtocol

LayerProtocol

1

One of the values of the attribute layerProtocol of the Cpd IE.

Preliminary

OpenModelAttribute

isInvariant: false
valueRange: no range constraint
support: MANDATORY

addressData

AddressData

1

Provides information on the address to be assigned to the CP(s) instantiated from the CPD.

Preliminary

OpenModelAttribute

isInvariant: false
valueRange: no range constraint
support: MANDATORY

L2AddressData

The L2AddressData information element supports providing information about Layer 2 level addressing applicable to a CP.

Preliminary

Attribute Name

Type

Mult.

Description

Stereotypes

macAddressAssignment

Boolean

1

Specify if the MAC address assignment is the responsibility of management and orchestration function or not.

If it is set to True, it is the management and orchestration function responsibility.

If it is set to False, it will be provided by an external entity, e.g. OSS/BSS.

Preliminary

OpenModelAttribute

isInvariant: false
valueRange: no range constraint
support: MANDATORY

L2ProtocolData

The L2ProtocolData information element describes the L2 protocol related data for a virtual link.

Applied Stereotypes:

Experimental

Attribute Name	Type	Mult.	Description	Stereotypes
name	String	0..1	Network name associated with this L2 protocol.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
networkType	NetworkType	0..1	Specifies the network type for this L2 protocol. Possible values: FLAT, VLAN, VXLAN, GRE. Note: If this attribute is included in the VNFD, the attribute value shall be provided at run-time, unless a default value is provided at design time in the VNFD. If a default value is provided at design-time, this value may be overridden at run-time.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
vlanTransparent	Boolean	0..1	Specifies whether to support VLAN transparency for this L2 protocol or not.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
mtu	Integer	0..1	Specifies the maximum transmission unit (MTU) value for this L2 protocol.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
segmentationId	String	0..1	Network segment ID.	Future OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
physicalNetwork	String	0..1	The connected physical network of network type (VLAN or VxLAN) .	Future OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
routerExternal	Boolean	0..1	Specify if a vrouter comes from an external network.	Future OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY

L3AddressData

The L3AddressData information element supports providing information about Layer 3 level addressing scheme and parameters applicable to a CP.

Applied Stereotypes:

Preliminary

Attribute Name	Type	Mult.	Description	Stereotypes
ipAddressAssignment	Boolean	1	Specify if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
floatingIpActivated	Boolean	1	Specify if the floating IP scheme is activated on the CP or not.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
ipAddressType	IpVersion	0..1	Define address type. NOTE: The address type should be aligned with the address type supported by the layerProtocol attribute of the parent Cpd.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
numberOfIpAddress	Integer	0..1	Minimum number of IP addresses to be assigned based on this L3AddressData information element.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY

L3ProtocolData

The L3ProtocolData information element describes the L3 protocol related data for a virtual link.

Applied Stereotypes:

Experimental

Attribute Name	Type	Mult.	Description	Stereotypes
name	String	0..1	Network name associated with this L3 protocol.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
ipVersion	IpVersion	1	Specifies IP version of this L3 protocol. Value: • IPV4. • IPV6. NOTE : The value of the ipVersion attribute shall be consistent with the value of the layerProtocol attribute of the ConnectivityType IE .	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
cidr	String	1	Specifies the CIDR (Classless Inter- Domain Routing) of this L3 protocol. NOTE : If this attribute is included in the VNFD, the attribute value shall be provided at run-time, unless a default value is provided at design time in the VNFD. If a default value is provided at design-time, this value may be overridden at run-time.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
ipAllocationPools	KeyValuePair	0..*	Specifies the allocation pools with start and end IP addresses for this L3 protocol. NOTE : If this attribute is included in the VNFD, the attribute value shall be provided at run-time, unless a default value is provided at design time in the VNFD. If a default value is provided at design-time, this value may be overridden at run-time.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
gatewayIp	String	0..1	Specifies the gateway IP address for this L3 protocol. NOTE : If this attribute is included in the VNFD, the attribute value shall be provided at run-time, unless a default value is provided at design time in the VNFD. If a default value is provided at design-time, this value may be overridden at run-time.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
dhcpEnabled	Boolean	0..1	Indicating whether DHCP is enabled. Default is "FALSE" if not specified otherwise. Indicates whether DHCP (Dynamic Host Configuration Protocol) is enabled or disabled for this L3 protocol. NOTE : If this attribute is included in the VNFD, the attribute value shall be provided at run-time, unless a default value is provided at design time in the VNFD. If a default value is provided at design-time, this value may be overridden at run-time.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
ipv6AddressMode	IpV6AdressMode	0..1	Specifies IPv6 address mode. Possible values: • SLAAC. • DHCPV6-STATEFUL. • DHCPV6-STATELESS. May be present when the value of the ipVersion attribute is "IPV6" and shall be absent otherwise. NOTE : If this attribute is included in the VNFD, the attribute value shall be provided at run-time, unless a default value is provided at design time in the VNFD. If a default value is provided at design-time, this value may be overridden at run-time.	Experimental OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
ipv6RaMode	IpV6AdressMode	0..1	Specifies IPv6 address mode for vrouter. Possible values: • SLAAC. • DHCPV6-STATEFUL. • DHCPV6-STATELESS. May be present when the value of the ipVersion attribute is "IPV6" and shall be absent otherwise. Must be present when the VLAN/VXLAN connects to one or more vrouters. Note: The value of ipv6RaMode and ipv6AddressMode must be same.	Future OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
hostRoutes	KeyValuePair	0..*	Static routing list, including estination and nexthop information.	Future OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
dnsNameServers	String	0..*	DNS server list.	Future OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY

LinkBitrateRequirements

The LinkBitrateRequirements information element describes the requirements in terms of bitrate for a VL.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Mult.

Description

Stereotypes

root

Number

1

Throughput requirement of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN).

Preliminary

OpenModelAttribute

isInvariant: false
valueRange: no range constraint
support: MANDATORY

leaf

Number

0..1

Throughput requirement of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E?LAN branches).

NOTE: The present document does not specify the means to declare different bitrate requirements for leaf connections (e.g. E-LAN leaves).

Preliminary

OpenModelAttribute

isInvariant: false
valueRange: no range constraint
support: MANDATORY

LocalAffinityOrAntiAffinityRule

The LocalAffinityOrAntiAffinityRule describes the affinity or anti-affinity rule applicable between the virtualization containers to be created based on a particular VDU, or between internal VLs to be created based on a particular VnfVirtualLinkDesc.

Per VNF, the affinity/anti-affinity rules defined using this information element, using the AffinityOrAntiAffinityGroup information element, and using the placement constraints in the GrantLifecycleOperation as defined in ETSI GS NFV IFA 007 [i.3] should be conflict-free. In case of conflicts, the placement constraints in the GrantLifecycleOperation shall take precedence.

Applied Stereotypes:

Preliminary

Attribute Name

Type

Mult.

Description

Stereotypes

type

RuleType

1

Specifies whether the rule is an affinity rule or an anti-affinity rule.

Preliminary

OpenModelAttribute

isInvariant: false
valueRange: no range constraint
support: MANDATORY

scope

RuleScope

1

Specifies the scope of the rule.

Preliminary

OpenModelAttribute

isInvariant: false
valueRange: no range constraint
support: MANDATORY

QoS

The QoS datatype specifies quality of service parameters applicable to a VL.

It is the asbstract parent of the NsQos and VnfQos datatypes, as the NsQoS (QoS in ETSI GS NFV IFA 014) includes a priority attribute, while VnfQoS (QoS in ETSI GS NFV IFA 011) does not.

Applied Stereotypes:

Preliminary
Reference

Attribute Name	Type	Mult.	Description	Stereotypes
latency	Number	1	Maximum latency in ms.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
packetDelayVariation	Number	1	Maximum jitter in ms.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
packetLossRatio	Number	0..1	Maximum packet loss ratio. Cardinality is 0 if no packetLossRatio requirement exists.	Preliminary OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
qosId	Identifier	1	Qos ID.	Future OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
qosName	String	1	Human readable Qos name.	Future OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY
rules	KeyValuePair	0..*	Detailed requirements of Qos, including maximum bandwidth limitation{max_kbps}?maximum burst bandwidth limitation{max_burst_kbps} ?direction{egress\|ingress}?etc.	Future OpenModelAttribute isInvariant: false valueRange: no range constraint support: MANDATORY

Enumerations from Common Sub-Model

AddressType

Type of address

Applied Stereotypes:

Experimental

Contains Enumeration Literals:

MAC
IP

IpV6AdressMode

Specifies IPv6 address mode. May be present when the value of ipVersion attribute is IPV6 and shall be absent otherwise.

Applied Stereotypes:

Experimental

Contains Enumeration Literals:

SLAAC
DHCPV6_STATEFUL
DHCPV6_STATELESS

IpVersion

Specifies IP version of this L3 protocol.

Value:

• IPV4.

• IPV6.

Applied Stereotypes:

Experimental

Contains Enumeration Literals:

IPV4
IPV6

LayerProtocol

Identifies the protocol to which this VL gives access.

Applied Stereotypes:

Preliminary

Contains Enumeration Literals:

ETHERNET
MPLS
ODU2
IPV4
IPV6
PSEUDOWIRE

NetworkType

Specifies the network type for this L2 protocol.

Applied Stereotypes:

Experimental

Contains Enumeration Literals:

FLAT
VLAN
VXLAN
GRE

RuleScope

Defines the scope of the rule.

Applied Stereotypes:

Preliminary

Contains Enumeration Literals:

NFVI_POP
ZONE
ZONE_GROUP
NFVI_NODE

RuleType

Specifies the type of rule.

Applied Stereotypes:

Preliminary

Contains Enumeration Literals:

AFFINITY
ANTI_AFFINITY

Versions Compared

Old Version 8

New Version 9

Key

Classes from Common Sub-Model

AffinityOrAntiAffinityGroup class

Datatypes from Common Sub-Model

AddressData

ConnectivityType

CpProtocolData

L2AddressData

L2ProtocolData

L3AddressData

L3ProtocolData

LinkBitrateRequirements

LocalAffinityOrAntiAffinityRule

QoS

Enumerations from Common Sub-Model

AddressType

IpV6AdressMode

IpVersion

LayerProtocol

NetworkType

RuleScope

RuleType

Page Comparison

Versions Compared

Old Version 8

New Version 9

Key

Classes from Common Sub-Model

AffinityOrAntiAffinityGroup class

Datatypes from Common Sub-Model

AddressData

ConnectivityType

CpProtocolData

L2AddressData

L2ProtocolData

L3AddressData

L3ProtocolData

LinkBitrateRequirements

LocalAffinityOrAntiAffinityRule

QoS

Enumerations from Common Sub-Model

AddressType

IpV6AdressMode

IpVersion

LayerProtocol

NetworkType

RuleScope

RuleType