This page shows the differences between the current clean version model with ETSI IFA011 v2.5.1 and other proposed changes:
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
cpdId | Identifier | 1 | Identifier of this Cpd information element. | OpenModelAttribute
| attribute |
In IFA 011 and model but not in clean: layerProtocol | Enum Model has type LayerProtocol | 1..N | Identifies which protocol the CP uses for connectivity purposes (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire, etc.). | OpenModelAttribute
| attribute |
cpRole In model this is called cpdRole to distinguish it from a cpRole | String | 0..1 | Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS. For example a VNF with a tree flow pattern within the VNF will have legal cpRoles of ROOT and LEAF. | OpenModelAttribute
| attribute |
description | String | 0..1 | Provides human-readable information on the purpose of the CP (e.g. CP for control plane traffic). | OpenModelAttribute
| attribute |
cpProtocol | CpProtocolData | 1..N | Identifies the protocol layering information the CP uses for connectivity purposes and associated information. There shall be one cpProtocol for each layer protocol as indicated by the attribute layerProtocol. Editor's note: the attribute "layerProtocol" still needs further discussion. The info model has layerProtocol and has moved cpProtocol to sub-classes. Note: For now keep cpProtocol in Cpd. | OpenModelAttribute
| attribute |
trunkMode | Boolean | 1 | Information about whether the CP instantiated from this CPD is in Trunk mode (802.1Q or other). | OpenModelAttribute
| attribute |
New in IFA011 v2.5.1 securityGroupRuleId Note: not added in the model for R4 | Identifier (reference to SecurityGroupRule | 0..* | Reference of the security group rules bound to this CPD. | OpenModelAttribute
| attribute or association? |
allowedAddressData Note: propose to move this out of common definition of Cpd as it is specific to VNFD. | AddressData | 0..N | For specifying floating IP(s) to be shared among Cpds, which are reserved for vnfReservedCpd described in the VNFD. | OpenModelAttribute
| attribute |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
flavorId | Identifier | 1 | Identifier of this DF within the VNFD. | OpenModelAttribute
| Attribute |
| description | String | 1 | Human readable description of the DF. | OpenModelAttribute
| Attribute |
| vduProfile | VduProfile | 1..* | Describes additional instantiation data for the VDUs used in this flavor. | OpenModelAttribute
| Association |
| virtualLinkProfile | VirtualLinkProfile | 0..* | Defines the internal VLD along with additional data which is used in this DF. NOTE 1: This allows for different VNF internal topologies between DFs. NOTE 2: virtualLinkProfile needs to be provided for all VLs that the CPs of the VDUs in the VDU profiles connect to. | OpenModelAttribute
| Association |
| instantiationLevel | InstantiationLevel | 1..* | Describes the various levels of resources that can be used to instantiate the VNF using this flavour. Examples: Small, Medium, Large. If there is only one "instantiationLevel" entry, it shall be treated as the default instantiation level for this DF. | OpenModelAttribute
| Association |
| affinityOrAntiAffinityGroup | AffinityOrAntiAffinityGroup | 0..* | Specifies affinity or anti-affinity relationship applicable between the virtualisation containers (e.g. virtual machines) to be created using different VDUs or internal VLs to be created using different VnfVirtualLinkDesc(s) in the same affinity or anti-affinity group. NOTE: In the present specification, including either VDU(s) or VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is supported. Extension to support including both VDU(s) and VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is left for future specification. | OpenModelAttribute
| Association |
| scalingAspect | ScalingAspect | 0..* | The scaling aspects supported by this DF of the VNF. scalingAspect shall be present if the VNF supports scaling. | OpenModelAttribute
| Association |
| placementGroup | PlacementGroup | 0..* | Determine where VNFC's (VDU's) are placed with respect to the VNF | OpenModelAttribute
| Association |
| baseConfigGroup | BaseConfigGroup | 0..1 |
| OpenModelAttribute
Experimental | Association |
| deploymentGroup | DeploymentGroup | 1..* | DeploymentGroup provides the minimum viable VDU and associated VNFC configuration for a useable VNF. | OpenModelAttribute
Experimental | Association |
IFA011 also defines: defaultInstantiationLevelId supportedOperation vnfLcmOperationsConfiguration vnfIndicator initialDelta monitoringParameter Should these be added? Note: For now have only included defaultInstantiationLevelId , monitoringParameter and vnfIndicator (missing association) |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
vduId | Identifier (Reference to Vdu) Model has type Vdu as this is an association end | 1 | Uniquely identifies a VDU. | OpenModelAttribute
PassedByReference | Association |
| numberOf Instances | Integer | 1 | Number of instances of VNFC based on this VDU to deploy for an instantiation level or for a scaling delta. | OpenModelAttribute
Experimental | Association |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
latency | Number | 1 | Maximum latency in ms. | OpenModelAttribute
|
| packetDelayVariation | Number | 1 | Maximum jitter in ms. | OpenModelAttribute
|
| packetLossRatio | Number | 0..1 | Maximum packet loss ratio. Cardinality is 0 if no packetLossRatio requirement exists. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes | Attribute Type |
|---|---|---|---|---|---|
groupId | Identifier | 1 | Identifies an affinity or anti-affinity group to which the affinity or anti-affinity rule applies. | OpenModelAttribute
| Attribute |
type Model has affinityOrAntiAffinity | Enum AffinityType with literals: "AFFINITY" "ANTI_AFFINITY) | 1 | Specifies whether the rule is an affinity rule or an anti-affinity rule. | OpenModelAttribute
valueRange: "Affinity", "Anti-Affinity" Note: Incorrect usage of value range. Remove it | Attribute |
| scope | AffinityOrAntiAffinityScope enum with literals: "NFVI_POP" "ZONE" "ZONE_GROUP" "NFVI_NODE" | 1 | Specifies the scope of the rule. | OpenModelAttribute
valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node Note: Incorrect usage of value range. Put in enum as CAPS. |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
addressType | Identifier Both IFA011 and model have this as an enum called "AddressType" with literals: "MAC" "IP" (note: model incorrectly calls this AdressType) | 1 | Describes the type of the address to be assigned to the CP instantiated from the parent CPD. Value:
The content type shall be aligned with the address type supported by the layerProtocol attribute of the parent CPD. | OpenModelAttribute
|
| l2AddressData | L2AddressData | 0..1 | Provides the information on the MAC addresses to be assigned to the CP(s) instantiated from the parent CPD. Shall be present when the addressType is MAC address. | OpenModelAttribute
Experimental |
| l3AddressData | L3AddressData | 0..1 | Provides the information on the IP addresses to be assigned to the CP instantiated from the parent CPD. Shall be present when the addressType is IP address. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
iPAddressAssignment | Boolean | 1 | Specify if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility. | OpenModelAttribute
|
| floatingIpActivated | Boolean | 1 | Specify if the floating IP scheme is activated on the CP or not. | OpenModelAttribute
|
| iPAddressType | Enum AddressTypeIpAddressType | 0..1 | Define address type. Values:
NOTE: The address type should be aligned with the address type supported by the layerProtocol attribute of the parent Cpd. | OpenModelAttribute
valueRange: "IPv4", "IPv6" Note: Incorrect usage of value range |
| numberOfIpAddress | Integer | 0..1 | Minimum number of IP addresses to be assigned based on this L3AddressData information element. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
associatedLayerProtocol | Enum Model has this as LayerProtocol enum | 1 | One of the values of the attribute layerProtocol of the Cpd IE. | OpenModelAttribute
|
| addressData | AddressData | 0..* Model has 1 | Provides information on the addresses to be assigned to the CP(s) instantiated from the CPD. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
layerProtocol | Enum Model has enum LayerProtocol, however it doesn't define the literals: "ETHERNET", "MPLS", "ODU2", "IPV4", "IPV6" and "PSEUDOWIRE" Note: Just because we may not support all these layer protocols does not mean they shouldn't be defined. | 1..* | Identifies the protocols this VL gives access to (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire). | OpenModelAttribute
|
| flowPattern | String | 0..1 | Identifies the flow pattern of the connectivity (Line, Tree, Mesh). | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
virtualCpuPinningPolicy | Enum Model has enum CpuPinningPolicy with values: STATIC, DYNAMIC | 0..1 | The policy can take values of "static" or "dynamic". In case of "static" the virtual CPU cores are requested to be allocated to logical CPU cores according to the rules defined in virtualCpuPinningRules. In case of "dynamic" the allocation of virtual CPU cores to logical CPU cores is decided by the VIM. (e.g.: SMT (Simultaneous Multi-Threading) requirements). | OpenModelAttribute
valueRange: "static", "dynamic" Incorrect use of valueRange |
| virtualCpuPinningRule | Not specified Editor's note: need to be specified | 0..1 | A list of rules that should be considered during the allocation of the virtual CPUs to logical CPUs in case of "static" virtualCpuPinningPolicy. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
requestedAdditionalCapabilityName | String | 1 | Identifies a requested additional capability for the VDU. | OpenModelAttribute
valueRange: For acceleration capabilities, reference to ETSI GS NFV-IFA 002. Incorrect use of valueRange. Put in description |
| supportMandatory | Boolean | 1 | Indicates whether the requested additional capability is mandatory for successful operation. | OpenModelAttribute
|
| minRequestedAdditionalCapabilityVersion | String | 0..1 | Identifies the minimum version of the requested additional capability. | OpenModelAttribute
|
| preferredRequestedAdditionalCapabilityVersion | String | 0..1 | Identifies the preferred version of the requested additional capability. | OpenModelAttribute
|
| targetPerformanceParameters | KeyValuePair | 1..* | Identifies specific attributes, dependent on the requested additional capability type. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
isAutoscaleEnabled | Boolean | 0..1 | It permits to enable (TRUE)/disable (FALSE) the auto-scaling functionality. NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported. | OpenModelAttribute
|
| isAutohealEnabled | Boolean | 0..1 | It permits to enable (TRUE)/disable (FALSE) the auto-healing functionality. NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported. | OpenModelAttribute
|
| additionalConfigurableProperty | Not specified We need to specify and propose to ETSI. Propose to specify as string | 0..* | It provides VNF specific configurable properties that can be modified using the ModifyVnfInfo operation. | OpenModelAttribute
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
additionalVnfcConfigurableProperty | String | 0..N | It provides VNFC configurable properties that can be modified using the ModifyVnfInfo operation. NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported. | OpenModelAttribute
|
Datatype: VnfLifecycleManagementScript
Note: In the model this is called VnfLifecycleManagementScript to distinguish it from NsLifecycleManagementScript. Would this be the abstract class in Common?there are two data types called VnfLifecycleManagementScript and NsLifecycleManagementScript.
Defines the information elements related to the lifecycle management script for the VNF.
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
event | Enum In the model this is LcmEventType | 0..* | Describes VNF lifecycle event(s) or an external stimulus detected on a VNFM reference point. NOTE: At least one of these two attributes shall be included. | OpenModelAttribute
valueRange: for lifecycle events, include: "EVENT_START_INSTANTIATION", "EVENT_END_INSTANTIATION", "EVENT_START_SCALING", "EVENT_END_SCALING", "EVENT_START_SCALING_TO_LEVEL", "EVENT_END_SCALING_TO_LEVEL", "EVENT_START_HEALING", "EVENT_END_HEALING", "EVENT_START_TERMINATION", "EVENT_END_TERMINATION", "EVENT_START_VNF_FLAVOR_CHANGE", "EVENT_END_VNF_FLAVOR_CHANGE", "EVENT_START_VNF_OPERATION_CHANGE", "EVENT_END_VNF_OPERATION_CHANGE", "EVENT_START_VNF_EXT_CONN_CHANGE", "EVENT_END_VNF_EXT_CONN_CHANGE", "EVENT_START_VNFINFO_MODIFICATION", "EVENT_END_VNFINFO_MODIFICATION"; for external stimulus, include: receipt of request message of instantiation, scaling, healing, termination, change of VNF flavour, change of the operation state of the VNF, change of external VNF connectivity, modification of VNF information or the receipt of a notification regarding the change of a VNF indicator value. Incorrect usage of valueRange. Remove this. |
| lcmTransitionEvent | String | 0..* | Describes the transition VNF lifecycle event(s) that cannot be mapped to any of the enumerated values defined for the event attribute. NOTE: At least one of these two attributes shall be included. | OpenModelAttribute
|
| script | Not specified. We should define this and propose to ETSI. Propose to define as string | 1 | Information to locate a VNF LCM script (e.g. written in a DSL as specified in requirement VNF_PACK.LCM.001) triggered to react to one of the events listed in the event attribute. | OpenModelAttribute
|
| scriptDsl | String | 1 | Defines the domain specific language (i.e. the type) of script that is provided. Types of scripts could include bash, python, etc. | OpenModelAttribute
|
| scriptInput | KeyValuePair | 0..* | Array of KVP requirements with the key as the parameter name and the value as the parameter that need to be passed as an input to the script. NOTE: The scriptInput values are passed to the scripts in addition to the parameters received in the operation invocation request or indicator value change. | OpenModelAttribute
|
...