Page Comparison

This page shows the differences between the current clean version model with ETSI IFA011 v2.5.1 and other proposed changes:

Verified against IFA011 v2.5.1 and IFA015 v2.5.1
Added "Attribute Type" column to indicate whether the class attribute is an "attribute" or member end of an "association". Without this information it is difficult to create a class diagram. We might want to consider also for those "Attribute Types" that are associations to put whether there is shared or composite aggregation, or no aggregation at all. Note: This will not be necessary when model is put into Papyrus, as all associations will start with "_"
Changed attribute Applied Stereotypes to represent the actual stereotypes being applied, and not just a property of a stereotype. Note: When the model is in Papyrus, GenDoc will output this field correctly.
Added class definitions and applied stereotypes. Note: GenDoc will do this correctly when the model is in Papyrus.
Proposal to define actual enums and not use the general term "Enum". Make sure the model captures these correctly in Papyrus.
Proposal to remove incorrect usage of valueRange in OpenModelAttribute stereotype. Make sure this is not incorrectly propagated to Papyrus.

Table of Contents

printable	false

...

A VNFD is a deployment template which describes a VNF in terms of deployment and operational behaviour requirements. It also contains connectivity, interface and virtualised resource requirements.

Take out the following as it is not relevant to the info model: References: tosca-nfv-YAML-v1.0-wd05-rev02 (tosca.nodes.nfv.vnfd, but node details are not defined) ETSI GS NFV-IFA 011 V2.1.3 (VNFD)

Applied Stereotypes:

OpenModelClass

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
vnfdId	Identifier	1	Identifier of this VNFD information element. This attribute shall be globally unique. NOTE: The VNFD Identifier shall be used as the unique identifier of the VNF Package that contains this VNFD. Any modification of the content of the VNFD or the VNF Package shall result in a new VNFD Identifier.	OpenModelAttribute isInvariant: true support: MANDATORY	attribute
vnfProvider	String	1	Provider of the VNF and of the VNFD.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfProductName	String	1	Name to identify the VNF Product. Invariant for the VNF Product lifetime.	OpenModelAttribute isInvariant: true support: MANDATORY	attribute
vnfSoftwareVersion	StringVersion	1	Software version of the VNF. This is changed when there is any change to the software that is included in the VNF Package.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfdVersion	StringVersion	1	Identifies the version of the VNFD.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfProductInfoName	String	0..1	Human readable name for the VNF Product. Can change during the VNF Product lifetime.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfProductInfoDescription	String	0..1	Human readable description of the VNF Product. Can change during the VNF Product lifetime.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfmInfo	String	0..N*	Identifies VNFM(s) compatible with the VNF described in this version of the VNFD.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: use the name of micro-service of the vnfm drive. For vendor specific VNFM, the value composes of "vendorname" and "vnfmdriver", e.g. "mycompanyvnfmdriver"; for generic VNFM, the value is "gvnfmdriver". Remove this from the valueRange and put in the description.	attribute
localizationLanguage	String	0..N*	Information about localization languages of the VNF (includes e.g. strings in the VNFD). NOTE: This allows to provide one or more localization languages to support selecting a specific localization language at VNF instantiation time.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: refer to ISO936 https://www.iso.org/iso-639-language-codes.html Remove this from the valueRange and put in the description.	attribute
defaultLocalizationLanguage	String	0..1	Default localization language that is instantiated if no information about selected localization language is available.	OpenModelAttribute isInvariant: false support: CONDITIONAL-MANDATORY valueRange: refer to ISO936 https://www.iso.org/iso-639-language-codes.html Remove this from the valueRange and put in the description. condition: Shall be present if "localizationLanguage" is present and shall be absent otherwise.	attribute
vdu	Vdu	1..N*	Virtualisation Deployment Unit.	OpenModelAttribute isInvariant: false support: MANDATORY	association
virtualComputeDesc	VirtualComputeDesc	1..N*	Defines descriptors of virtual compute resources to be used by the VNF.	OpenModelAttribute isInvariant: false support: MANDATORY	association
virtualStorageDesc	VirtualStorageDesc	0..N*	Defines descriptors of virtual storage resources to be used by the VNF.	OpenModelAttribute isInvariant: false support: MANDATORY	association
IN IFA 011 but not in clean swImageDesc	SwImageDesc	0..N*	Defines descriptors of software images to be used by the VNF.	OpenModelAttribute isInvariant: false support: MANDATORY	association
intVirtualLinkDesc	VnfVirtualLinkDesc	0..N*	Represents the type of network connectivity mandated by the VNF provider between two or more CPs which includes at least one internal CP.	OpenModelAttribute isInvariant: false support: MANDATORY	association
IN IFA 011 but not in clean securityGroupRule	SecurityGroupRule (not sure if this is datatype or class, as it is not in the model.)	0..N*	Defines security group rules to be used by the VNF. (See definition of SecurityGroupRule in IFA011 v2.5.1)	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
vnfReservedCpd	VduCpd	0..N*	Reserved IP Address for VNF which is not bounded to any specific VNFC, but assigned manually from outside and potentially shared as a floating IP among VNFCs.	OpenModelAttribute isInvariant: false support: MANDATORY	association
vnfExtCpd	VnfExtCpd	1..N*	Describes external interface(s) exposed by this VNF enabling connection with a VL.	OpenModelAttribute isInvariant: false support: MANDATORY	association
deploymentFlavour	VnfDf	1..N*	Describes specific DF(s) of a VNF with specific requirements for capacity and performance.	OpenModelAttribute isInvariant: false support: MANDATORY	association
configurableProperties	VnfConfigurableProperties	0..1	Describes the configurable properties of the VNF (e.g. related to auto scaling and auto healing).	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
modifiableAttributes	VnfInfoModifiableAttributes	0..1	Describes the modifiable attributes of the VNF. Editor's note: need check the usage of this attribute	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
lifeCycleManagementScript	VnfLifeCycleManagementScript	0..N*	Includes a list of events and corresponding management scripts performed for the VNF.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
NOTE: This is "obsolete" in IFA011 v2.5.1, so mark it as "obsolete" Remove it, from diagram too. elementGroup	VnfdElementGroup	0..N*	Describes the associated elements of a VNFD for a certain purpose during VNF lifecycle management.	OpenModelAttribute isInvariant: false support: MANDATORY	association
vnfIndicator	VnfIndicator	0..N*	Declares the VNF indicators that are supported by this VNF.	OpenModelAttribute isInvariant: false support: MANDATORY	assocation
logo	String	0..1	File path of the vendor specified logo.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
guide	String	0..1	UUID of the vendor guide/documentation which is attached to VNF and can be downloaded from the model.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
IN IFA 011 but not in clean autoScale	Rule	0..N*	Rule that determines when a scaling action needs to be triggered on a VNF instance e.g. based on certain VNF indicator values or VNF indicator value changes or a combination of VNF indicator value(s) and monitoring parameter(s).	OpenModelAttribute isInvariant: false support: MANDATORY	attribute

...

A VNFC instance created based on the VDU maps to a single virtualisation container (e.g.; a VM).e.g.; a VM). Remove the following as not relevant to the info model: References: tosca-nfv-YAML-v1.0-wd05-rev02 ETSI GS NFV-IFA 011 V2.1.3

Applied Stereotypes:

OpenModelClass

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
vduId	Identifier	1	Unique identifier of this Vdu in VNFD.	OpenModelAttribute isInvariant: true support: MANDATORY	attribute
name	String	1	Human readable name of the Vdu.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
description	String	1	Human readable description of the Vdu.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
intCpd	VduCpd	1..N*	Describes network connectivity between a VNFC instance (based on this Vdu) and an a Virtual Link (VL).	OpenModelAttribute isInvariant: false support: MANDATORY	association
virtualComputeDesc	Identifier (reference to VirtualComputeDesc) Info model has type: VirtualComputeDesc which makes more sense because this is an association member end.	1	Describes CPU, Memory and acceleration requirements of the Virtualisation Container realising this Vdu.	OpenModelAttribute isInvariant: false support: MANDATORY PassedByReference	association
virtualStorageDesc	Identifier (reference to VirtualStorageDesc) Info model has type: VirtualStorageDesc which makes more sense because this is an association member end.	0..N*	Describes storage requirements for a VirtualStorage instance attached to the virtualisation container created from virtualComputeDesc defined for this Vdu.	OpenModelAttribute isInvariant: false support: MANDATORY PassedByReference	association
bootOrder	KeyValuePair	0..N*	Boot order of valid boot devices. (lowest index defines highest boot priority). NOTE: If no boot order is defined the default boot order defined in the VIM or NFVI shall be used.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: "key/name" indicates the the boot index "value" references a descriptor from which a valid boot device is created e.g. VirtualStorageDesc from which a VirtualStorage instance is created. Remove this from valueRange and put in description.	attribute
swImageDesc	SwImageDesc (in model) This is member end of an association.	0..1Editor's note: the scenario of using "0" needs to be clarified.	Describes the software image which is directly loaded on the virtualisation container realising this Vdu. NOTE: More software images can be attached to the virtualisation container using VirtualStorage resources.	OpenModelAttribute isInvariant: false support: MANDATORY PassedByReference	association
nfviConstraint	KeyValuePairString	0..N*	Describes constraints on the NFVI for the VNFC instance(s) created from this Vdu. For example, aspects of a secure hosting environment for the VNFC instance that involve additional entities or processes. NOTE: These are constraints other than stipulating that a VNFC instance has access to a certain resource, as a prerequisite to instantiation. The attributes virtualComputeDesc and virtualStorageDesc define the resources required for instantiation of the VNFC instance.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: "key/name" includes "AvailabilityZone", "HostAggregates". Remove from valueRange and put in description.	attribute
monitoringParameter	MonitoringParameter	0..N*	Defines the virtualised resources monitoring parameters on VDU level.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
configurableProperties	VnfcConfigurableProperties	1	Describes the configurable properties of all VNFC instances based on this VDU.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
New in IFA011 v2.5.1 bootData	String	0..1	Contains a string or a URL to a file contained in the VNF package used to customize a virtualised compute resource at boot time. The bootData may contain variable parts that are replaced by deployment specific values before being sent to the VIM.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
injectFiles	String	0..N*	Describes the information (e.g. URL) about the scripts, config drive metadata, etc. which can be used during Vdu booting process.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute

Class: SwImageDesc

This information element describes the software image for a particular VDU or a virtual storage resource. Remove: References: tosca-nfv-YAML-v1.0-wd05-rev02 ETSI GS NFV-IFA 011 V2.1.3

Applied Stereotypes:

OpenModelClass

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
id	Identifier	1	The identifier of this software image.	OpenModelAttribute isInvariant: true support: MANDATORY	attribute
name	String	1	The name of this software image.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
version	String Should this be Version?	1	The version of this software image.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
checksum	String	1	The checksum of the software image file.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
containerFormat	String	1	The container format describes the container file format in which software image is provided.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
diskFormat	String	1	The disk format of a software image is the format of the underlying disk image.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
minDisk	IntegerNumber	1	The minimal disk size requirement for this software image. The value of the "size of storage" attribute of the VirtualStorageDesc referencing this SwImageDesc shall not be smaller than the value of minDisk.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
minRam	IntegerNumber	0..1	The minimal RAM requirement for this software image. The value of the "size" attribute of VirtualMemoryData of the Vdu referencing this SwImageDesc shall not be smaller than the value of minRam.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
size	Integer Number	1	The size of this software image.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
swImage	Identifier (Reference to a SwImage) Model has type SwImage which makes more sense because this is a member end of an association	1	This is a reference to the actual software image. The reference can be relative to the root of the VNF Package or can be a URL.	OpenModelAttribute isInvariant: false support: MANDATORY PassedByReference	association
operatingSystem	String	0..1	Identifies the operating system used in the software image. This attribute may also identify if a 32 bit or 64 bit software image is used. Remove "support:"	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
supportedVirtualisationEnvironment	String	0..N*	Identifies the virtualisation environments (e.g. hypervisor) compatible with this software image.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
virtualComputeDescId	Identifier	1	Unique identifier of this VirtualComputeDesc in the VNFD.	OpenModelAttribute isInvariant: true support: MANDATORY	attribute
logicalNode	LogicalNodeRequirements	10..N*	The logical Node requirements.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
requestAdditionalCapabilities	RequestedAdditionalCapabilityData	0..N*	Specifies requirements for additional capabilities. These may be for a range of purposes. One example is acceleration related capabilities.	OpenModelAttribute isInvariant: false support: MANDATORY Why is this marked "obsolete"	attribute
computeRequirements	KeyValuePair	0..N*	Specifies compute requirements.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
virtualMemory	VirtualMemoryData	1	The virtual memory of the virtualised compute.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
virtualCpu	VirtualCpuData	1	The virtual CPU(s) of the virtualised compute.	OpenModelAttribute isInvariant: false support: MANDATORY	attribute
New in IFA011 virtualDisk	BlockStorageData (need to create this new datatype)	0..N*	The local or ephemeral disk(s) of the virtualised compute.	Experimental OpenModelAttribute isInvariant: false support: MANDATORY	attribute

Datatype: VirtualCpuData

The VirtualCpuData information element supports the specification of requirements related to virtual CPU(s) of a virtual compute resource.

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes	Attribute Type
flavorId	Identifier	1	Identifier of this DF within the VNFD.	OpenModelAttribute isInvariant: true support: MANDATORY	Attribute
description	String	1	Human readable description of the DF.	OpenModelAttribute isInvariant: false support: MANDATORY	Attribute
vduProfile	VduProfile	1..N	Describes additional instantiation data for the VDUs used in this flavor.	OpenModelAttribute isInvariant: false support: MANDATORY	Association
virtualLinkProfile	VirtualLinkProfile	0..N	Defines the internal VLD along with additional data which is used in this DF. NOTE 1: This allows for different VNF internal topologies between DFs. NOTE 2: virtualLinkProfile needs to be provided for all VLs that the CPs of the VDUs in the VDU profiles connect to.	OpenModelAttribute isInvariant: false support: MANDATORY	Association
instantiationLevel	InstantiationLevel	1..N	Describes the various levels of resources that can be used to instantiate the VNF using this flavour. Examples: Small, Medium, Large. If there is only one "instantiationLevel" entry, it shall be treated as the default instantiation level for this DF.	OpenModelAttribute isInvariant: false support: MANDATORY	Association
affinityOrAntiAffinityGroup	AffinityOrAntiAffinityGroup	0..N	Specifies affinity or anti-affinity relationship applicable between the virtualisation containers (e.g. virtual machines) to be created using different VDUs or internal VLs to be created using different VnfVirtualLinkDesc(s) in the same affinity or anti-affinity group. NOTE: In the present specification, including either VDU(s) or VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is supported. Extension to support including both VDU(s) and VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is left for future specification.	OpenModelAttribute isInvariant: false support: MANDATORY	Association
scalingAspect	ScalingAspect Note: This is not defined by ONAP. It is a Class. See IFA015 info model for how it is defined and place in class diagram.	0..N	The scaling aspects supported by this DF of the VNF. scalingAspect shall be present if the VNF supports scaling.	OpenModelAttribute isInvariant: false support: MANDATORY	Association
placementGroup	PlacementGroup	0..N	Determine where VNFC's (VDU's) are placed with respect to the VNF	OpenModelAttribute isInvariant: false support: MANDATORY Experimental (note that experimental is a lifecycle state and not a value for "support")	Association
baseConfigGroup	BaseConfigGroup	0..1	BaseConfigGroup may set Access Control Lists (ACL's) and establish security groups and server groups. BaseConfigGroup creates/establishs storage for the VM's (OpenStack Cinder). BaseConfigGroup may establish internal networks such as OAM (VNF Mgmt) or MNS (Maintenance & Surveillance) established.	OpenModelAttribute isInvariant: false support: MANDATORY Experimental	Association
deploymentGroup	DeploymentGroup	1..N	DeploymentGroup provides the minimum viable VDU and associated VNFC configuration for a useable VNF.	OpenModelAttribute isInvariant: false support: MANDATORY Experimental	Association
IFA011 also defines: defaultInstantiationLevelId supportedOperation vnfLcmOperationsConfiguration vnfIndicator initialDelta

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

vduId

Identifier (Reference to Vdu)

Model has type Vdu as this is an association end

1

Uniquely identifies a VDU.

OpenModelAttribute

isInvariant: false
support: MANDATORY

PassedByReference

Association

numberOf Instances

Integer

1

Number of instances of VNFC based on this VDU to deploy for an instantiation level or for a scaling delta.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Experimental

Association

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

latency

Number

1

Maximum latency in ms.

OpenModelAttribute

isInvariant: false
support: MANDATORY

packetDelayVariation

Number

1

Maximum jitter in ms.

OpenModelAttribute

isInvariant: false
support: MANDATORY

packetLossRatio

Number

0..1

Maximum packet loss ratio. Cardinality is 0 if no packetLossRatio requirement exists.

OpenModelAttribute

isInvariant: false
support: MANDATORY

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

type

Enum

Which one?

1

Specifies whether the rule is an affinity rule or an anti-affinity rule.

support: MANDATORY

valueRange: "Affinity", "Anti-Affinity"

scope

Enum

Which one?

1

Specifies the scope of the rule.

support: MANDATORY

valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node"

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

Attribute Type

groupId

Identifier

1

Identifies an affinity or anti-affinity group to which the affinity or anti-affinity rule applies.

OpenModelAttribute

isInvariant: true
support: MANDATORY

Attribute

type

Enum

AffinityType with literals: "AFFINITY" "ANTI_AFFINITY)

1

Specifies whether the rule is an affinity rule or an anti-affinity rule.

OpenModelAttribute

isInvariant: false
support: MANDATORY

valueRange: "Affinity", "Anti-Affinity"

Note: Incorrect usage of value range. Remove it

Attribute

scope

AffinityScope enum with literals: "NFVI_POP"

"ZONE"

"ZONE_GROUP"

"NFVI_NODE"

1

Specifies the scope of the rule.

OpenModelAttribute

isInvariant: false
support: MANDATORY

valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node

Note: Incorrect usage of value range.

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

addressType

Identifier

Both IFA011 and model have this as an enum called "AddressType" with literals:

"MAC"

"IP"

(note: model incorrectly calls this AdressType)

1

Describes the type of the address to be assigned to the CP instantiated from the parent CPD.

Value:

MAC address.
IP address.

etc.

The content type shall be aligned with the address type supported by the layerProtocol attribute of the parent CPD.

OpenModelAttribute

isInvariant: false
support: MANDATORY

l2AddressData

L2AddressData

0..1

Provides the information on the MAC addresses to be assigned to the CP(s) instantiated from the parent CPD.

Shall be present when the addressType is MAC address.

OpenModelAttribute

isInvariant: false
support: MANDATORY

Experimental

l3AddressData

L3AddressData

0..1

Provides the information on the IP addresses to be assigned to the CP instantiated from the parent CPD.

Shall be present when the addressType is IP address.

OpenModelAttribute

isInvariant: false
support: MANDATORY

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes
iPAddressAssignment	Boolean	1	Specify if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility.	OpenModelAttribute isInvariant: false support: MANDATORY
floatingIpActivated	Boolean	1	Specify if the floating IP scheme is activated on the CP or not.	OpenModelAttribute isInvariant: false support: MANDATORY
iPAddressType	Enum Which one?	0..1	Define address type. Values: IPv4 address. IPv6 address NOTE: The address type should be aligned with the address type supported by the layerProtocol attribute of the parent Cpd.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: "IPv4", "IPv6" Note: Incorrect usage of value range
numberOfIpAddress	Integer	0..1	Minimum number of IP addresses to be assigned based on this L3AddressData information element.	OpenModelAttribute isInvariant: false support: MANDATORY

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

associatedLayerProtocol

Enum

Model has this as LayerProtocol enum

1

One of the values of the attribute layerProtocol of the Cpd IE.

OpenModelAttribute

isInvariant: false
support: MANDATORY

addressData

AddressData

0..N

Model has 1

Provides information on the addresses to be assigned to the CP(s) instantiated from the CPD.

OpenModelAttribute

isInvariant: false
support: MANDATORY

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

layerProtocol

Enum

Model has enum LayerProtocol, however it doesn't define the literals:

"ETHERNET", "MPLS", "ODU2", "IPV4", "IPV6" and "PSEUDOWIRE"

1..N

Identifies the protocol this VL gives access to (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire).

OpenModelAttribute

isInvariant: false
support: MANDATORY

flowPattern

String

0..1

Identifies the flow pattern of the connectivity (Line, Tree, Mesh).

OpenModelAttribute

isInvariant: false
support: MANDATORY

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

virtualCpuPinningPolicy

Enum

Model has enum CpuPinningPolicy

0..1

The policy can take values of "static" or "dynamic". In case of "static" the virtual CPU cores are requested to be allocated to logical CPU cores according to the rules defined in virtualCpuPinningRules. In case of "dynamic" the allocation of virtual CPU cores to logical CPU cores is decided by the VIM. (e.g.: SMT (Simultaneous Multi-Threading) requirements).

OpenModelAttribute

isInvariant: false
support: MANDATORY

valueRange: "static", "dynamic"

Incorrect use of valueRange

virtualCpuPinningRule

Not specified

Editor's note: need to be specified

0..1

A list of rules that should be considered during the allocation of the virtual CPUs to logical CPUs in case of "static" virtualCpuPinningPolicy.

OpenModelAttribute

isInvariant: false
support: MANDATORY

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes
requestedAdditionalCapabilityName	String	1	Identifies a requested additional capability for the VDU.	OpenModelAttribute isInvariant: false support: MANDATORY valueRange: For acceleration capabilities, reference to ETSI GS NFV-IFA 002. Incorrect use of valueRange
supportMandatory	Boolean	1	Indicates whether the requested additional capability is mandatory for successful operation.	OpenModelAttribute isInvariant: false support: MANDATORY
minRequestedAdditionalCapabilityVersion	String	0..1	Identifies the minimum version of the requested additional capability.	OpenModelAttribute isInvariant: false support: MANDATORY
preferredRequestedAdditionalCapabilityVersion	String	0..1	Identifies the preferred version of the requested additional capability.	OpenModelAttribute isInvariant: false support: MANDATORY
targetPerformanceParameters	KeyValuePair	1..N	Identifies specific attributes, dependent on the requested additional capability type.	OpenModelAttribute isInvariant: false support: MANDATORY

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

isAutoscaleEnabled

Boolean

0..1

It permits to enable (TRUE)/disable (FALSE) the auto-scaling functionality.

NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported.

OpenModelAttribute

isInvariant: false
support: MANDATORY

isAutohealEnabled

Boolean

0..1

It permits to enable (TRUE)/disable (FALSE) the auto-healing functionality.

NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported.

OpenModelAttribute

isInvariant: false
support: MANDATORY

additionalConfigurableProperty

String

0..N

It provides VNF specific configurable properties that can be modified using the ModifyVnfInfo operation.

OpenModelAttribute

isInvariant: false
support: MANDATORY

...

Attribute Name

Type

Multiplicity

Description

Applied Stereotypes

additionalVnfcConfigurableProperty

String

0..N

It provides VNFC configurable properties that can be modified using the ModifyVnfInfo operation.

NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported.

OpenModelAttribute

isInvariant: false
support: MANDATORY

...

Attribute Name	Type	Multiplicity	Description	Applied Stereotypes
event	Enum In the model this is LcmEventType	0..N	Describes VNF lifecycle event(s) or an external stimulus detected on a VNFM reference point. NOTE: At least one of these two attributes shall be included.	OpenModelAttribute isInvariant: false support: CONDITIONAL_MANDATORY condition: At least one of the 2 attributes event or lcmTransitionEvent shall be included valueRange: for lifecycle events, include: "EVENT_START_INSTANTIATION", "EVENT_END_INSTANTIATION", "EVENT_START_SCALING", "EVENT_END_SCALING", "EVENT_START_SCALING_TO_LEVEL", "EVENT_END_SCALING_TO_LEVEL", "EVENT_START_HEALING", "EVENT_END_HEALING", "EVENT_START_TERMINATION", "EVENT_END_TERMINATION", "EVENT_START_VNF_FLAVOR_CHANGE", "EVENT_END_VNF_FLAVOR_CHANGE", "EVENT_START_VNF_OPERATION_CHANGE", "EVENT_END_VNF_OPERATION_CHANGE", "EVENT_START_VNF_EXT_CONN_CHANGE", "EVENT_END_VNF_EXT_CONN_CHANGE", "EVENT_START_VNFINFO_MODIFICATION", "EVENT_END_VNFINFO_MODIFICATION"; for external stimulus, include: receipt of request message of instantiation, scaling, healing, termination, change of VNF flavour, change of the operation state of the VNF, change of external VNF connectivity, modification of VNF information or the receipt of a notification regarding the change of a VNF indicator value. Incorrect usage of valueRange. Remove this.
lcmTransitionEvent	String	0..N	Describes the transition VNF lifecycle event(s) that cannot be mapped to any of the enumerated values defined for the event attribute. NOTE: At least one of these two attributes shall be included.	OpenModelAttribute isInvariant: false support: CONDITIONAL_MANDATORY condition: At least one of the 2 attributes event or lcmTransitionEvent shall be included
script	String	1	Information to locate a VNF LCM script (e.g. written in a DSL as specified in requirement VNF_PACK.LCM.001) triggered to react to one of the events listed in the event attribute.	OpenModelAttribute isInvariant: false support: MANDATORY
scriptDsl	String	1	Defines the domain specific language (i.e. the type) of script that is provided. Types of scripts could include bash, python, etc.	OpenModelAttribute isInvariant: false support: MANDATORY
scriptInput	KeyValuePair	0..N	Array of KVP requirements with the key as the parameter name and the value as the parameter that need to be passed as an input to the script. NOTE: The scriptInput values are passed to the scripts in addition to the parameters received in the operation invocation request or indicator value change.	OpenModelAttribute isInvariant: false support: MANDATORY

...

Versions Compared

Old Version 9

New Version 10

Key

Class: SwImageDesc

Datatype: VirtualCpuData