This page shows the attributes that are proposed to be marked as "obsoletedobsolete" for ONAP R3 model.
The base model is copied from ONAP R2 resource design time model.
| Note | ||
|---|---|---|
| ||
|
Proposed Changes:
| Table of Contents | ||
|---|---|---|
|
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
| virtualComputeDescId | Identifier | 1 | Unique identifier of this VirtualComputeDesc in the VNFD. | support: MANDATORY |
| logicalNode | LogicalNodeData | 1..N | The logical Node requirements. | support: MANDATORY |
| supportlifecycle: OBSOLETEDOBSOLETE | ||||
| computeRequirements | KeyValuePair | 0..N | Specifies compute requirements. | support: MANDATORY |
| virtualMemory | VirtualMemoryData | 1 | The virtual memory of the virtualised compute. | support: MANDATORY |
| virtualCpu | VirtualCpuData | 1 | The virtual CPU(s) of the virtualised compute. | support: MANDATORY |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
| cpuArchitecture | String | 0..1 | CPU architecture type. Examples are x86, ARM. The cardinality can be 0 during the allocation request, if no particular CPU architecture type is requested. | support: MANDATORY |
| numVirtualCpu | Integer | 1 | Number of virtual CPUs. | support: MANDATORY |
| virtualCpuClock | Number(recommended DM type: Scalar-Unit-Freq) | 0..1 | Minimum virtual CPU clock rate (e.g. in MHz). The cardinality can be 0 during the allocation request, if no particular value is requested. | support: MANDATORY |
| supportlifecycle: MANDATORYOBSOLETE | ||||
| vduCpuRequirements | KeyValuePair | 0..N | Array of key-value pair requirements on the Compute (CPU) for the VDU. | support: MANDATORY |
supportlifecycle: OBSOLETEDOBSOLETE specification moved to vduCpuRequirements editor's note: need to check whether can be optional |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
| virtualMemSize | Number (recommended DM type: Scalar-Unit-Size) | 1 | Amount of virtual Memory (e.g. in MB). | support: MANDATORY |
| supportlifecycle: MANDATORYOBSOLETE | ||||
| vduMemRequirements | KeyValuePair | 0..N | Array of key-value pair requirements on the memory for the VDU. | support: MANDATORY |
| supportlifecycle: OBSOLETEDOBSOLETE specification moved to vduMemRequirements |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
id | Identifier | 1 | Unique identifier of this VirtualStorageDesc in the VNFD. | support: MANDATORY |
typeOfStorage | String | 1 | Type of virtualised storage resource | support: MANDATORY |
sizeOfStorage | Number (recommended DM type: Scalar-Unit-Size) | 1 | Size of virtualised storage resource | support: MANDATORY |
vduStorageRequirements | KeyValuePair | 0..N | An array of key-value pairs that articulate the storage deployment requirements. | support: MANDATORY |
|
|
|
| supportlifecycle: OBSOLETEDOBSOLETE |
swImageDesc | Identifier (Reference to SwImageDesc) | 0..1 | Software image to be loaded on the VirtualStorage resource created based on this VirtualStorageDesc. | support: MANDATORY |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
flavorId | Identifier | 1 | Identifier of this DF within the VNFD. | support: MANDATORY |
| description | String | 1 | Human readable description of the DF. | support: MANDATORY |
| vduProfile | VduProfile | 1..N | Describes additional instantiation data for the VDUs used in this flavor. | support: MANDATORY |
| virtualLinkProfile | VirtualLinkProfile | 0..N | Defines the internal VLD along with additional data which is used in this DF. NOTE 1: This allows for different VNF internal topologies between DFs. NOTE 2: virtualLinkProfile needs to be provided for all VLs that the CPs of the VDUs in the VDU profiles connect to. | support: MANDATORY |
| instantiationLevel | InstantiationLevel | 1..N | Describes the various levels of resources that can be used to instantiate the VNF using this flavour. Examples: Small, Medium, Large. If there is only one "instantiationLevel" entry, it shall be treated as the default instantiation level for this DF. | support: MANDATORY |
| affinityOrAntiAffinityGroup | AffinityOrAntiAffinityGroup | 0..N | Specifies affinity or anti-affinity relationship applicable between the virtualisation containers (e.g. virtual machines) to be created using different VDUs or internal VLs to be created using different VnfVirtualLinkDesc(s) in the same affinity or anti-affinity group. NOTE: In the present specification, including either VDU(s) or VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is supported. Extension to support including both VDU(s) and VnfVirtualLinkDesc(s) into the same affinity or anti-affinity group is left for future specification. | support: MANDATORY |
| scalingAspect | ScalingAspect | 0..N | The scaling aspects supported by this DF of the VNF. scalingAspect shall be present if the VNF supports scaling. | support: MANDATORY |
| placementGroup | PlacementGroup | 0..N | Determine where VNFC's (VDU's) are placed with respect to the VNF | support: EXPERIMENTAL |
| baseConfigGroup | BaseConfigGroup | 0..1 |
| support: EXPERIMENTAL |
| deploymentGroup | DeploymentGroup | 1..N | DeploymentGroup provides the minimum viable VDU and associated VNFC configuration for a useable VNF. | support: EXPERIMENTAL |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
vduId | Identifier (Reference to Vdu) | 1 | Uniquely identifies a VDU. | support: MANDATORY |
| numberOf Instances | Integer | 1 | Number of instances of VNFC based on this VDU to deploy for an instantiation level or for a scaling delta. | support: MANDATORY |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
latency | Number | 1 | Maximum latency in ms. | support: MANDATORY |
| packetDelayVariation | Number | 1 | Maximum jitter in ms. | support: MANDATORY |
| packetLossRatio | Number | 0..1 | Maximum packet loss ratio. Cardinality is 0 if no packetLossRatio requirement exists. | support: MANDATORY |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
type | Enum | 1 | Specifies whether the rule is an affinity rule or an anti-affinity rule. | support: MANDATORY valueRange: "Affinity", "Anti-Affinity" |
| scope | Enum | 1 | Specifies the scope of the rule. | support: MANDATORY valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node" |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
groupId | Identifier | 1 | Identifies an affinity or anti-affinity group to which the affinity or anti-affinity rule applies. | support: MANDATORY |
| type | Enum | 1 | Specifies whether the rule is an affinity rule or an anti-affinity rule. | support: MANDATORY valueRange: "Affinity", "Anti-Affinity" |
| scope | Enum | 1 | Specifies the scope of the rule. | support: MANDATORY valueRange: "NFVI-PoP", "Zone", "ZoneGroup", "NFVI-node" |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
addressType | Identifier | 1 | Describes the type of the address to be assigned to the CP instantiated from the parent CPD. The content type shall be aligned with the address type supported by the layerProtocol attribute of the parent CPD. | support: MANDATORY |
| l2AddressData | L2AddressData | 0..1 | Provides the information on the MAC addresses to be assigned to the CP(s) instantiated from the parent CPD. Shall be present when the addressType is MAC address. | support: MANDATORY |
| l3AddressData | L3AddressData | 0..1 | Provides the information on the IP addresses to be assigned to the CP instantiated from the parent CPD. Shall be present when the addressType is IP address. | support: MANDATORY |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
iPAddressAssignment | Boolean | 1 | Specify if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility. | support: MANDATORY |
| floatingIpActivated | Boolean | 1 | Specify if the floating IP scheme is activated on the CP or not. | support: MANDATORY |
| iPAddressType | Enum | 0..1 | Define address type. NOTE: The address type should be aligned with the address type supported by the layerProtocol attribute of the parent Cpd. | support: MANDATORY valueRange: "IPv4", "IPv6" |
| numberOfIpAddress | Integer | 0..1 | Minimum number of IP addresses to be assigned based on this L3AddressData information element. | support: MANDATORY |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
associatedLayerProtocol | Enum | 1 | One of the values of the attribute layerProtocol of the Cpd IE. | support: MANDATORY |
| addressData | AddressData | 0..N | Provides information on the addresses to be assigned to the CP(s) instantiated from the CPD. | support: MANDATORY |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
layerProtocol | Enum | 1 | Identifies the protocol this VL gives access to (Ethernet, MPLS, ODU2, IPV4, IPV6, Pseudo-Wire). | support: MANDATORY |
| flowPattern | String | 0..1 | Identifies the flow pattern of the connectivity (Line, Tree, Mesh). | support: MANDATORY |
Class: VirtualCpuPinningData (
...
OBSOLETE)
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
|
|
|
| supportlifecycle: OBSOLETEDOBSOLETE valueRange: "static", "dynamic" |
| supportlifecycle: OBSOLETEDOBSOLETE |
Class: RequestedAdditionalCapabilityData (
...
OBSOLETE)
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
|
|
|
| supportlifecycle: DEPRECATEDOBSOLETE valueRange: For acceleration capabilities, reference to ETSI GS NFV-IFA 002. |
| supportlifecycle: DEPRECATEDOBSOLETE | |||
supportlifecycle: DEPRECATEDOBSOLETE | ||||
| supportlifecycle: DEPRECATEDOBSOLETE | ||||
| supportlifecycle: DEPRECATEDOBSOLETE |
Class: VnfConfigurableProperties
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
isAutoscaleEnabled | Boolean | 0..1 | It permits to enable (TRUE)/disable (FALSE) the auto-scaling functionality. NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported. | support: MANDATORY |
| isAutohealEnabled | Boolean | 0..1 | It permits to enable (TRUE)/disable (FALSE) the auto-healing functionality. NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported. | support: MANDATORY |
| additionalConfigurableProperty | String | 0..N | It provides VNF specific configurable properties that can be modified using the ModifyVnfInfo operation. | support: MANDATORY |
...
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
additionalVnfcConfigurableProperty | String | 0..N | It provides VNFC configurable properties that can be modified using the ModifyVnfInfo operation. NOTE: A cardinality of "0" indicates that configuring this present VNF property is not supported. | support: MANDATORY |
Class: LifecycleManagementScript
| Attribute Name | Type | Multiplicity | Description | Applied Stereotypes |
|---|---|---|---|---|
event | Enum | 0..N | Describes VNF lifecycle event(s) or an external stimulus detected on a VNFM reference point. NOTE: At least one of these two attributes shall be included. | support: MANDATORY valueRange: for lifecycle events, include: "EVENT_START_INSTANTIATION", "EVENT_END_INSTANTIATION", "EVENT_START_SCALING", "EVENT_END_SCALING", "EVENT_START_SCALING_TO_LEVEL", "EVENT_END_SCALING_TO_LEVEL", "EVENT_START_HEALING", "EVENT_END_HEALING", "EVENT_START_TERMINATION", "EVENT_END_TERMINATION", "EVENT_START_VNF_FLAVOR_CHANGE", "EVENT_END_VNF_FLAVOR_CHANGE", "EVENT_START_VNF_OPERATION_CHANGE", "EVENT_END_VNF_OPERATION_CHANGE", "EVENT_START_VNF_EXT_CONN_CHANGE", "EVENT_END_VNF_EXT_CONN_CHANGE", "EVENT_START_VNFINFO_MODIFICATION", "EVENT_END_VNFINFO_MODIFICATION"; for external stimulus, include: receipt of request message of instantiation, scaling, healing, termination, change of VNF flavour, change of the operation state of the VNF, change of external VNF connectivity, modification of VNF information or the receipt of a notification regarding the change of a VNF indicator value. |
| lcmTransitionEvent | String | 0..N | Describes the transition VNF lifecycle event(s) that cannot be mapped to any of the enumerated values defined for the event attribute. NOTE: At least one of these two attributes shall be included. | support: MANDATORY |
| script | String | 1 | Information to locate a VNF LCM script (e.g. written in a DSL as specified in requirement VNF_PACK.LCM.001) triggered to react to one of the events listed in the event attribute. | support: MANDATORY |
| scriptDsl | String | 1 | Defines the domain specific language (i.e. the type) of script that is provided. Types of scripts could include bash, python, etc. | support: MANDATORY |
| scriptInput | KeyValuePair | 0..N | Array of KVP requirements with the key as the parameter name and the value as the parameter that need to be passed as an input to the script. NOTE: The scriptInput values are passed to the scripts in addition to the parameters received in the operation invocation request or indicator value change. | support: MANDATORY |
...