Page Comparison

...

Flow 1: Design and Distribute First Control Loop

Testing Directions

Log into SDC as designer (cs0008)

Create a service

In Composition, create a resource instance in the service

On the composition canvas, click on the resource instance

On the panel on the right, click on the second tab (Deployment Artifacts)

Click "Add Artifact"

Assign values to the artifacts as in the below screenshot, and upload the provided blueprint.

Image Removed

Submit the Service for Testing

Log in as a Tester user (jm0007)

Test the Service and Approve It

Log in as a Governance User (gv0001)

Approve Service for Distribution

Log in as Operations User (op0001)

Distribute Service

Monitor Service to see that both DCAE and Clamp clients have successfully deployed the artifact

...

@startuml
title Creating the service design in SDC and distributing design artifacts
actor SDC_Tester
participant SDC
participant CLAMP
box "DCAE controller"
participant "Service Change Handler" as SCH
database Inventory
end box
autonumber
note over SDC_Tester: Closed loop 1
SDC_Tester -> SDC : Design vCPE service composed\nof one VNF resource
SDC_Tester -> SDC : Upload DCAE TCA blueprint\nas artifact
SDC_Tester -> SDC : Test, certify, distribute the service design
SDC -> CLAMP : Blueprint distribution
SDC -> SCH : Blueprint distribution
SCH -> Inventory : Save blueprint
@enduml

Flow 2: Configure and Deploy First Control Loop

Image Removed

...

...

@startuml
title Creating the service design in SDC and distributing design artifacts
actor SDC_Tester
participant SDC
participant CLAMP
box "DCAE controller"
participant "Service Change Handler" as SCH
database Inventory
end box
autonumber
note over SDC_Tester: Closed loop 1
SDC_Tester -> SDC : Design vCPE service composed\nof one VNF resource
SDC_Tester -> SDC : Upload DCAE TCA blueprint\nas artifact
SDC_Tester -> SDC : Test, certify, distribute the service design
SDC -> CLAMP : Blueprint distribution
SDC -> SCH : Blueprint distribution
SCH -> Inventory : Save blueprint
@enduml

Testing Directions

Log into SDC as designer (cs0008)

Create a service

In Composition, create a resource instance in the service

On the composition canvas, click on the resource instance

On the panel on the right, click on the second tab (Deployment Artifacts)

Click "Add Artifact"

Assign values to the artifacts as in the below screenshot, and upload the provided blueprint.

Image Added

Submit the Service for Testing

Log in as a Tester user (jm0007)

Test the Service and Approve It

Log in as a Governance User (gv0001)

Approve Service for Distribution

Log in as Operations User (op0001)

Distribute Service

Monitor Service to see that both DCAE and Clamp clients have successfully deployed the artifact

Flow 2: Configure and Deploy First Control Loop

Image Added

Testing Directions

Log into CLAMP using credentials admin/password

Select Open CL from Closed Loop Menu

You will find the Closed Loop model that has been distributed from SDC.  Its name has the form: CLAMP + <Service name> + <version> + <resource name>.  For example, below there is a closed loop model for serivce 'intsrv1', version 1.0 and resource vLBMS0.

Image Removed

This will bring up a view of the control loop model.  This allows you to create the TCA configuration policy and Operational Policy.

Image Removed

Fill in the details of the Operational Policy by clicking on Policy

Image Removed

Fill in the details of the Configuration Policy by clicking on TCA

Image Removed

Choose Save CL from Closed Loop Menu

Choose Submit from Manage Menu

Choose Deploy from Manage Menu

...

@startuml
title Configure and Deploy First Control Loop
actor CLAMP_Tester
participant CLAMP
participant Policy
box "DCAE controller"
database Inventory
participant "Deployment-handler" as DH
control "Cloudify+plugin" as Cloudify
participant "Policy-handler" as PH
database "Consul-kv" as consul
participant "Config-binding service" as CBS
control k8s
end box
participant TCA_Instance
autonumber
note over CLAMP_Tester: Closed loop 1
hnote right CLAMP_Tester: decided to install TCA
CLAMP_Tester -> CLAMP : Configure thresholds\n of control loop
CLAMP_Tester -> CLAMP : Configure actions\n of control loop
activate CLAMP
CLAMP -> Policy : Create Configuration\n and Operational Policies
CLAMP -> Inventory : Get DCAE Service Id\n based on Distributed Parameters
group install TCA_Instance
CLAMP -> DH : install instance of TCA with policy_id as input
activate DH
DH -> Inventory : get blueprint for TCA
Inventory --> DH : blueprint for TCA
DH -> Cloudify : install TCA_Instance
activate Cloudify
Cloudify --> DH : started: execution_id
DH --> CLAMP : started installation: url to get status
deactivate DH
CLAMP -> CLAMP : sleep
group CLAMP polling for installation status
    CLAMP -> CLAMP : wake up
    activate CLAMP #DarkSalmon
    CLAMP -> DH : get status of installation
    activate DH #DarkSalmon
    DH -> Cloudify : get execution status
    activate Cloudify #DarkSalmon
    Cloudify --> DH : status: started
    deactivate Cloudify
    DH --> CLAMP : installation status: **processing**
    deactivate DH
    CLAMP -> CLAMP : sleep
    deactivate CLAMP
end group
Cloudify -> PH : get policy\n by policy_id
PH -> Policy : /getConfig policy for policyName = policy_id
Policy --> PH : return found policy
PH --> Cloudify : policy by policy_id
Cloudify -> consul: store config with policies\n for TCA_Instance
Cloudify -> k8s: create instance of TCA
activate k8s
create TCA_Instance
k8s -> TCA_Instance: deploys
activate TCA_Instance
k8s --> Cloudify: created instance of TCA
deactivate k8s
deactivate Cloudify
TCA_Instance -> CBS: get Config\n and policies\n (**new API**)
CBS -> consul: get Config\n and policies
consul --> CBS: Config\n and policies
CBS --> TCA_Instance: Config and policies
TCA_Instance -->]: run
group CLAMP polling for installation status
    CLAMP -> CLAMP : wake up
    activate CLAMP #DarkSalmon
    CLAMP -> DH : get status of installation
    activate DH #DarkSalmon
    DH -> Cloudify : get execution status
    activate Cloudify #DarkSalmon
    Cloudify --> DH : status: terminated
    deactivate Cloudify
    DH --> CLAMP : installation status: **succeeded**
    deactivate DH
    deactivate CLAMP
end group
hnote over CLAMP: installed TCA
deactivate CLAMP
end group
@enduml

Testing Directions

Log into CLAMP using credentials admin/password

Select Open CL from Closed Loop Menu

You will find the Closed Loop model that has been distributed from SDC.  Its name has the form: CLAMP + <Service name> + <version> + <resource name>.  For example, below there is a closed loop model for serivce 'intsrv1', version 1.0 and resource vLBMS0.

Image Added

This will bring up a view of the control loop model.  This allows you to create the TCA configuration policy and Operational Policy.

Image Added

Fill in the details of the Operational Policy by clicking on Policy

Image Added

Fill in the details of the Configuration Policy by clicking on TCA

Image Added

Choose Save CL from Closed Loop Menu

Choose Submit from Manage Menu

The Status will change to "Distributed"

Choose Deploy from Manage Menu

This may take on the order of tens of seconds, as it waits for DCAE to report final success.

Once the Deployment is successful in DCAE, Status will change to "Active"

Image Added

Flow 3: Run Control Loop After Deployment 

@startuml
title This is the flow that will be tested in Beijing
participant VNF
participant VES_Collector
participant TCA_Instance1
participant Policy
participant AppC
autonumber
VNF -> VES_Collector : VES Message\nmeasurementsForVfScaling
VES_Collector -> TCA_Instance1 : VES Message\nmeasurementsForVfScaling
TCA_Instance1 -> Policy : Signature ONSET Message
Policy -> AppC : Action
AppC -> VNF : Action
note left
VNF action taken which
corrects the condition
end note
VNF -> VES_Collector : VES Message\nmeasurementsForVfScaling
note left
Time passes until next 
message
end note
VES_Collector -> TCA_Instance1 : VES Message\nmeasurementsForVfScaling
TCA_Instance1 -> Policy : Signature ABATE Message
@enduml

...